The Vixen rigid Accessory Tray for HAL130 and Porta II Tripods offers practical storage space for eyepieces and various accessories.It also improves the overall stability of the tripod.The tray can be used on the HAL130 and SXG HAL 130 for GP and SX, as well as on the Porta II tripod.PROPERTIESFor eyepieces and various accessoriesIncreases the stability of the tripodsCan be used on HAL130, SXG HAL 130 and Porta tripodsWHAT'S INCLUDEDTray for tripodsScrew set 

Safe and convenient bag to transport your OTA or tripod to your observing site. Holds many size tubes. Wrap the optical tube in the protective cloth with Velcro tape and secure it to the wall inside the carrying bag. Includes 2 accessory pouches to store a finder scope and flip mirror. Reflective tape on the carry strap increases visibility at a dark site.Suggested tubes and tripods: A80M ; A80Mf ; A70Lf ; ED103S; AX103S ; SXGHAL130 and SXG-AL130 TripodFEATUREScarry bag for tubes & tripod maximum optical tube size: 850x125mm (L&W)reflective tape on handles prevent lossSCOPE OF DELIVERY1x Vixen Carry Bag2x accessory pouches

300 mm adjustment shaft with flexible design for comfortable observations with the Porta II and the Mini Porta.The large adjustment knobs allow you to make smooth, fine adjustments to the axles.Also compatible with a wide range of other mounts from other manufacturers.FEATURESComfortable tracking by handLarge adjustment knobs for fine tuningDesigned for wide range of mountsLength: 300 mmDELIVERY CONTENT300 mm adjustment shaft

Vixen Tube Clamp 115s for VSD90ss This high-quality tube clamp made in Japan is used to mount the VSD90ss f 5.5 astrograph. The base plate has M6 and M8 holes and can therefore be used on almost all mounts.FEATURES Supplied with various holes as standard High-quality CNC-milled aluminium tube clamp with non-slip locking screw Felt on the inside, prevents scratches on the VSD tube Threaded screw holes bottom: M8 holes x 2 (spacing 35 mm), M6 holes x 2 (spacing 35 mm) x 2 rows, 1/4-inch holes x 3 (inside 30 mm), 1/4-inch holes x 3 (interval 30 mm) Threaded screw holes top: M8 holes x 2 (spacing 35 mm) x 2 sets, M6 holes x 2 (spacing 35 mm) x 2 rows, 1/4-inch hole x 1 in the centre, M4 holes x 2 (spacing 20 mm) Dimensions: 162 × 71 × 155 mmSCOPE OF DELIVERY VSD tube clamp

The soft padded Vixen accessory bag can be attached to a tripod, keeping your accessories close at hand. The bag is exactly the right size for the Polarie U Star tracker. But also other accessories, such as a camera lens, batteries or the remote control of your camera can be stored safely and within reach in this soft bag. The neoprene material, which absorbs shocks excellently and offers good thermal insulation, protects your accessories extremely well. and protects your batteries and USB battery packs from extreme cold. FEATURESAccessory bag for attaching to a tripod Perfect fit for the Polarie U Star Tracker Suitable to keep all kinds of accessories clos at hand Material: neoprene, polyester Dimensions: 11 x 13 cm Weight: 95 g SCOPE OF DELIVERYTripod accessory bag Fastening strap

The 360 IV Lens Heater is designed to prevent camera lenses and telescopes from fogging up due to dew. It is also well suited for eyepieces.The heating element is a carbon fiber heater with a high thermal efficiency. The textile heating element provides great flexibility compared to other heating materials. The power cord (USB cable) has a particularly high flexibility to be still elastic at low temperatures. A very flexible Velcro tape allows for quick and easy attachment to and removal from the lens. The tape can be easily removed from the lens without pulling tightly. The heating tape has a very low power consumption and can be operated with a 10,000 mA battery for up to 14 hours.The Vixen Lens Heater 360 IV in detailWhen moisture in the air comes into contact with an object whose temperature is lower than the ambient temperature, small drops of water form - so-called dew condensation. Astrophotography often suffers from such lens fogging and the photo turns milky. Because the temperature and humidity change during the night and the camera becomes cooler than the ambient temperature, it is important to warm the objective's or telescope's lens by using heaters to prevent it from fogging. We recommend using the Lens Heater 360 IV when you want to do astrophotography or night photography on the coast, in the mountains or in cold regions. The heating elements are made of carbon fibers with improved heating performance, introduced for the fourth generation Vixen Lens Heater 360 IV. They efficiently keep the lens warm and fog-free with minimal power consumption. The heater temperature reaches 10 degrees Celsius above the ambient temperature (at 20 °C outside temperature and no wind). However, it varies according to influences in the environment. For power supply the lens heater is equipped with a detachable coiled cable (USB Type-C), up to 50 cm long. The 360 IV lens heater consumes only 2.5 W of power (5 V - 0.5 A). With a portable USB battery of e.g. 10,000 mA, it can operate continuously for about 14 hours (at 20 °C outdoor temperature). However, the operating time varies greatly depending on the environment and temperature. The soft and non-slip surface of the heating tape allows for easy attachment to the objective, eyepiece or telescope. The heater consists of a 30 mm wide and 600 mm long heating tape and is suitable for diameters up to 100 mm.FEATURESHeating type: carbon fiber textile heatingTemperature: 10 degrees Celsius above ambient outdoor temperature (at 20° C, no wind)Power source, power consumption: USB, 5 V, 0.5 A, 2.5 WPower cable: USB A (male)Connector: USB type C connector detachable coiled cable 20 to 50 cmOperating time: approximately 14 hours with fully charged 10,000 mAh battery (at 20 °C outdoor temperature)Recommended for lenses with a width of 30 mm and an outer diameter of 45 to 100 mmDimensions: 30 x 600 mmTotal weight: 67 gSCOPE OF DELIVERYLens Heater 360 IVUSB spiral cable

High-quality, stable aluminium tripod for a variety of mounts with 45 mm connections. The aluminium profile ensures firm positioning with a minimum amount of vibration. Suitable for GP2, GPD2, AP, SX, SXP, SXP2 and AXJ mounts or similar with 45 mm connections. FEATURES Robust aluminium tripod without mount Suitable for: GP-, SX- & AP mounts Height-adjustable: 81 - 130 cm Weight: 5.5 kg WHAT’S INCLUDED Aluminium tripod Adjustment pins for GP2, GPD2, AP and SX mounts

The Vixen Wifi adapter for EQ mounts allows you to control your Vixen mount via a smartphone or tablet. With the smartphone app STAR BOOK Wireless (free of charge) you can perform celestial navigation without any wiring. The app turns your smartphone or tablet into a controller for the equatorial mount in no time. The response delay of the mount, which is considered the biggest disadvantage of wireless connections, has been reduced to a level comparable to wired ones. Reduced power consumption compared to conventional controllers with LCD monitor The power consumption of the mount is reduced by up to 20%, allowing longer observations than with conventional wired controllers such as the STAR BOOK TEN. Operation similar to the STAR BOOK TEN controllerThe STAR BOOK Wireless app has a similar structure to the STAR BOOK TEN controller. Tap on a celestial object in the object list and start the GoTo. The mount will now automatically move to this target and bring it into the telescope's field of view. All the popular features of the STAR BOOK TEN are available.Convenient operation When looking through the telescope operate the mount by swiping on the app's star map. Since there are no buttons, simply slide your finger over the star chart for convenient operation of the mount. Extensive astronomical data includedThis includes data on easily observable celestial bodies such as Messier objects, NGC objects, IC objects as well as the Sun, Moon, planets, comets and dwarf planets. High-precision alignment By aligning to one or two stars, you already get a fairly accurate positioning of the mount. By aligning to three or more stars, you can achieve high-precision alignment of the mount for high magnifications. The objects will then be approached precisely and centrally in your telescope's field of view. The alignment information is stored and can be retained even when the telescope is switched off. By leaving the telescope in its current state without moving it after completing an observation, the next time you observe you can start the automatic setup with the same settings for the next observation. Individual setting options As with the STAR BOOK TEN controller, the app offers various individual settings, such as gear backlash compensation, night mode in red, autoguider and variable GoTo speed and LED brightness. You can also set the timing of the lens tube inversion (meridian flip) as desired. Even if the object moves south during tracking, you can prevent the telescope tube from inverting. Important information: Cannot be used on old SX mounts with the old blue Star Book. FEATURES Can be used on: SX2, SXD2, SXD2-PFL, SXP, SXP-PFL, SXP2, AXJ (without encoder), AXD, AX Not compatible with old SX mounts with blue Star Book CPU: 32bit CISC processor 120MH Connector: D-SUB 9-PIN socket Autoguider connector: 6-pin modular connector for SBIG Operation: Android 6, iOS 9.0 or higher Wifi standard: IEEE802.11b/g Data encryption: WPA2-APK Firmware update: via WiFi connection Operating voltage: DC12V 0,1A (max) Power supply: via mount Dimensions: 56 x 36 x 19.5 mm, weight: 60 g SCOPE OF DELIVERY Vixen Wifi adapter

The Vixen Nature Eye: Excellent value for money for beginners in astronomy. A compact but fully equipped beginners telescope for first observations in nature and the night sky. Comes with a tripod, which is easy to mount and transport. This small and handy telescope for beginners, is suitable for observing the moon as well as for terrestrial observations. Make your first explorations of the moon's surface, or observe the animals at the edge of the forest. However, with this affordable beginner's set, new perspectives open up for you. A rotatable diagonal mirror is built into the eyepiece mount to provide a comfortable viewing experience in any observation position. The built-in compass shows you the direction of the compass to help you orientate yourself. An ideal telescope for children to start with astronomy. FEATURES The perfect start into the world of astronomyMoon craters can be observedThe moons of Jupiter and the ring of Saturn become visibleAlso suitable for nature and bird watchingEasy to use, lightweight and portableExcellent for childrenAperture: 50 mm focal length: 360 mm Max. useful magnification: 72x Dimensions and weight: 1,26 kg Viewfinder telescope: 5x20mm Adapter and connections: 31.7 mm Weight: 1,26 kg SCOPE OF DELIEVERY Nature Eye 50 Telescope Eyepiece H10 (31,7mm / 1.25inch)Simple AZ mounting table tripod 2x Barlow lens Viewfinder telescope: 5x20

The Vixen SX dovetail adapter is used to attach a telescope to a mount. Tube clamps are also required for this and are connected to the dovetail adapter. Suitable for use on GP and SX mounts, as well as various other mounts with a Vixen standard dovetail mount.FEATURESFor attaching telescopes to mounts with Vixen connectionSuitable for all SX, Porta and GP mountsWeight: 160 gPACKAGE CONTENTSVixen SX dovetail adapterScrew setAllen key

Vixen has developed a new generation of SX mounts for demanding observers and astrophotographers. The SXD2WL mount is simply operated via a Wifi module with a smartphone or tablet. By controlling the mount with your smartphone using the free STAR BOOK Wireless app, you can easily use sky navigation functions such as automatic GoTo panning of celestial objects via your smartphone or tablet. By eliminating the power consumption of the conventional LCD (STAR BOOK TEN), the power consumption on the mount is reduced by up to 20%, thus enabling longer astronomical observation and astrophotography. When the desired celestial object is selected from a list, it is automatically panned into the telescope's field of view and tracking begins. An existing STAR BOOK TEN controller can also be used on this mount without any problems. Equipped with the same precision stepper motors as the top model, the AXD mount, the SXD2WL brings a new standard of performance and precision to the Vixen mount family. With a photographic load capacity of 15 kg, the axis cross of the mount weighs just 9.2 kg making it ideal for mobile observations. In addition, the motors mounted in the lower part of the mount also serve as a counterweight, so the mount requires fewer weights for balancing. The SXD2 mount in detail Precision stepper motors and micro-step motion control system At the heart of the SXD2 are the precision stepper motors, which offer better performance and response than previous models. The micro-step motion control system offers powerful and yet very smooth drive characteristics, which are given both in fine movements and in fast pans. Built-in bearings The bearings of the RA and DEC axes and the worm shafts have been significantly improved to reduce the load on the motors. As a result, the motors move much more smoothly than in previous models. High-precision worm gears High-precision processing technologies eliminate worm gear errors. The edges of the two worms and worm wheels are particularly smooth, enabling very precise tracking. Declination axis as counterweight The solid motor units are installed in the lower part of the declination axis so that the center of gravity of the SXD2 is below the intersection point of the RA and DEC axes. This means you need fewer additional counterweights. Latitude setting The latitude is adjustable between 0 and 70 degrees (divided into 3 zones and adjustable +/- 15 degrees per zone, for high, medium and low latitudes); latitude scale in 2-degree increments; fine adjustment with a tangent screw head, approx. 0.8 degrees per turn. Built-in PFL-II polar finder with illumination The built-in 5x20mm polar finder with 10° field of view has a 3-star alignment system. This eliminates the inconvenience of setting the date and original time. The illuminated reticle with variable brightness and automatic switch-off is adjustable in 8 levels and illuminated in red. The adjustment accuracy is 3 arc minutes. The wireless module in detail The Vixen Wifi adapter for EQ mounts allows you to control your Vixen mount via a smartphone or tablet. With the smartphone app STAR BOOK Wireless (free of charge) you can navigate the sky without any cables. The app turns your smartphone or tablet into a control unit for the equatorial mount in no time at all. The response delay of the mount, which is considered the biggest disadvantage of wireless connections, has been reduced to a level comparable to wired connections. Reduced power consumption compared to conventional controllers with LCD monitor The power consumption of the mount is reduced by up to 20%, allowing longer observations than with conventional wired controllers such as the STAR BOOK TEN. Operation similar to the STAR BOOK TEN controller. The STAR BOOK Wireless app has a similar structure to the STAR BOOK TEN controller. Depending on the star map setting, it contains up to 259,000 celestial objects. Tap on a celestial object in the object list and start the GoTo. The mount will now automatically move to this target and bring it into the telescope's field of view. All the popular features of the STAR BOOK TEN are retained Convenient operation When looking through the telescope operate the mount by swiping on the app's star chart. As there are no buttons, simply slide your finger over the star chart to operate the mount conveniently. Extensive astronomical data included In addition to data on easily observable celestial bodies such as Messier objects, NGC objects and IC objects, this also includes the sun, moon, planets, comets and dwarf planets. High-precision alignment By aligning the mount to one or two stars, you can already achieve fairly precise positioning. By aligning the mount to three or more stars, you can achieve high-precision alignment of the mount for high magnifications. The objects are then approached precisely and centrally in your telescope's field of view. The alignment information is saved and can be retained even when the device is switched off. By leaving the telescope in its current state after completing an observation without moving it, you can start the automatic installation with the same settings for the next observation.  Individual setting options As with the STAR BOOK TEN control unit, the app offers various individual settings, such as gear backlash compensation, night mode in red, autoguider and variable GoTo speed and LED brightness. You can also set the timing of the reversal of the objective tube (meridian flip) as desired. Even if the object moves to the south during tracking, you can prevent the telescope tube from reversing. Important note: Cannot be used on old SX mounts with the old blue Star Book! Technical information about the Wifi module: CPU with 32-bit CISC processor 120 MHz The unit is connected to the mount via a D-SUB 9PIN connector as with the STAR BOOK TEN. It has a 6-pin 6-wire modular plug for external autoguider operation. Supported operating systems are Android 6 or higher, iOS 9.0 or higher, WLAN standard: IEEE 802.11b/g/n. FEATURESRA sprocket: 180 teeth DEC sprocket: 180 teeth Shaft material and diameter: Carbon steel / Decl. 35 mm, RA 40 mm thickness Polar finder scope: 6x20 mm, PFL-II polar finder Fine height adjustment: 0° to 70°, (fine adjustment +/- 15°, height) Backsight rod: 20 mm diameter Azimuth adjustment: worm fine adjustment Power supply: DC12 V; 0.4~1.7 A Maximum load: 15 kg, photographic, without counterweight Counterweight: 1x 1.9 kg and 1x 3.7 kg Tripod connection: 45 mm spigot Dimensions: 36 cm (H) x 12 cm (W) x 36 cm (L) Weight: 8.8 kg (19.4 lb), without counterweight 32-bit CISC processor 120 MHz Operating system: Android 6 or higher, iOS 9.0 or higher Connection: D-SUB 9PIN connector Autoguider input ST4 Power consumption SXD2WL+Wireless unit: DC12V / 0.3-2.0 A (load 10 kg), 0.4-2.2 A (load 15 kg) SCOPE OF DELIVERYSXD2WL EQ mount Wireless unit 2 counterweights: 1.9 kg and 3.7 kg Mounting tools Pole finder PFL-II Cigarette lighter cable

The Vixen dew cap heater prevents your optics from fogging up due to dew.A must-have accessory for cold and damp nights.FEATURES Consumption: 16.2 Ohm (12 V, 8.9 W) Dimensions: 655 mm long heater with 2.2 m cable Connection: 2.1 socket with medium-negative polarity Weight: 120 g DELIVERY CONTENT Battery box Vixen dew cap heater

7 kg counterweight for balancing the mount with heavy telescopesSuitable for AXD, AXD2 and AXJ mountsFEATURES Counterweight for AXD/AXJ mounts Weight: 7 kgDELIVERY CONTENT7 kg counterweightClamp screw

AXD2 GoTo mount with AX103S telescope set The AXD2 mount comes with the new STARBOOK TEN controller and the PFL polar viewfinder, which allows you to configure the mount quickly and easily via reference stars.This telescope set has everything that you need for hobby astronomy.It includes a telescope, a mount with automatic tracking and a sturdy tripod. Featuring the STARBOOK TEN control system, the telescope locates celestial objects automatically so that you don't need to search for them manually.Even if you're not an expert, you can still give your friendsan exciting tour through the night sky! The AXD2 mount in detail:Robust construction and lightweight housing with 30 kg load capacity (photographic)The A7075 superalloy, the strongest aluminium alloy, is used for the R.A. and DEC axes. The stability of the A7075 superalloy is stronger than titanium, which is known for its strength as a lightweight material. Its thickness is 38% less than titanium. Using the A7075 superalloy for the axes ensures that the AXD mount is both lightweight and stable.21 bearingsThe rotating parts of the AXD mount have a total of 21 bearings. These ensure uniform motion in order to swivel the telescope and track objects.Stepper motorsVixen uses precise stepper motors for the mount in order to ensure optimal performance. The motors are controlled via a micro-step motion control system, which eliminates the disadvantage of stepper motors with large steps. The system generates 400 impulses per second at a high speed. This results in very quiet scanning with no vibrations. The stepper motors on the AXD mount have sufficient torques. This is most significant when working at high magnifications and photographing with a CCD camera with small pixel sizes.Worm gearsThe sizes of the worm gears were increased in the latest Atlux version. The AXD mount has 270 teeth in the R.A. axis and 216 teeth in the DC axis. Both axes are 50 mm in diameter. This ensures that the mount operates with precision and stability.Low backlashThe Vixen micro-step motion control system ensures that the stepper motors run uniformly at low and high speeds. This eliminates the need for reduction gears in the motor and therefore reduces the backlash in the gears.Elegant designThe flat sides of the mount were designed based on previous generations of the New Atlux range. The white and silver housing provides a modern and elegant exterior with high functionality.The AXD is the flagship model in the Vixen mount range.Original motor layoutThe solid R.A. and DEC motor units are arranged in the lower part of the mount. This means that they automatically act as a counterweight. As a result, you require far fewer weights on the counterweight bar. On small devices, no counterweight is required. The counterweight bar can be slid fully into the housing.Polar finder scopeThe AXD mount is equipped with a 6x20 polar finder as standard. The polar finder features an integrated scale, which provides a quick and easy way to polar align the telescope in the northern hemisphere.For observations in southern latitudes, the polar finder features an image of the Octans constellation, which can be aligned with the night sky.VPEC periodic error correctionPeriodic errors on mounts are usually measured and corrected by the user. Unlike the old StarBook controller, the STAR BOOK TEN controller saves these errors permanently. The periodic error of the mount is measured in the factory and corrected before delivery. This is known as VPEC and functions automatically as soon as you use the mount.It delivers an accuracy of +/- 2.8 arc seconds. You can increase the tracking accuracy further by saving your own recorded periodic errors.The AX 103S in detail:The AX103S is a top-of-the-range ED apochromat in the refractor series.It was developed for photography, including full-frame cameras, and illuminates a 44 mm frame.It features a triplet ED lens and a rear-mounted field flattener lens.The f8.0 refractor contains a central ED lens in the objective and reduces chromatic aberration to an absolute minimum.An optional focal reducer can reduce the aperture ratio to 1:5.6 in order to provide quicker results for astrophotographers.The built-in field flattener lens provides a sharp image across the entire field of view - an essential requirements in astrophotography.The 60 mm ring on the focuser allows you to attach a 2'' eyepiece and a camera adapter.The AX103S is specially designed for photography, but also offers stunning visual performance, especially for observing the moon and the planets.This telescope is guaranteed to provide a lifetime of outstanding performance!FEATURESAXD2 GoTo mount with AX103S telescopeProfessional telescope kitTracking accuracy of +/- 2.8 arc secondsMount with 30 kg load capacity (photographic)Modern STARBOOK TEN controller with autoguider inputAXD 103S apochromat for full frame photographyIlluminated polar finder with direct star alignmentSturdy, vibration-resistant P85DX observatory pierTotal weight: 64.6 kgDELIVERY CONTENTTR102 tripod AX103S apochromatAXD2 GoTo mountAXG half-pier 2 counterweights (1.5 kg and 7.0 kg) 7x50 finder scope Folding mirror Carry handle

The AX103S is a top-of-the-range ED apochromat in the refractor series. It features a triplet ED object lens and a rear-mounted field-flattener lens. The f8.0 refractor contains a central ED lens in the objective and reduces chromatic aberration to an absolute minimum. An optional focal reducer can reduce the aperture ratio to 1:5.6 in order to provide quicker results for astrophotographers. The built-in field flattener lens provides a sharp image across the entire field of view – an essential requirement in astrophotography. The 60 mm ring on the focuser allows you to attach a 2’’ eyepiece or accessories and a camera adapter. The AX103S is specially designed for photography, but also offers stunning visual performance, especially for observing the moon and the planets. The AX 103S is corrected for full frame photography and provides razor-sharp pictures right into the corners of the image field. This telescope is guaranteed to provide a lifetime of outstanding performance! FEATURES Optimized for full frame photography Fully coated triplet ED objective with flattener Very high sharpness and contrast Optional reducer availableBackfocus without Reducer: 150.0 mmBackfocus with Reducer: 63,5 mm103 mm aperture and 825 mm focal length WHAT’S INCLUDED Telescope Tube clamps and carry handle Illuminated 7x50 viewfinder telescope Vixen's very useful Flip mirror diagonal system for finding and framing targets

The AP mount provides a secure, stable support for your telescope. Thanks to the slip clutch mechanism, the mount can be quickly adjusted to the target object. There is a wide range of optional accessories. The ADVANCED PLUS mount is ideal for both beginners and advanced observers who require a lightweight travel mount. Stylish design The AP mount features an ultra-smooth finish without any projecting parts. Simply place your telescope on the mount and move it to the desired celestial object without having to loosen any clamps! Quick polar alignment The slip clutches allow you to easily adjust the telescope to your target object – no more searching for adjustment clamps in the dark! An optional polar meter is available, which enables you to locate the celestial pole when it is hidden by trees or buildings. Optional polar finder scope The innovative polar finder scope provides a new way to polar align your telescope. Simply align the stars in the crosshair reticle with the same stars in the night sky. Polar alignment is achieved via 3 reference stars. The polar finder is illuminated to facilitate orientation and switches off automatically after 3 minutes to save battery power. Optional power supply The RA and DEC motor modules are powered by four AA alkaline, NiMh or NiCd batteries. The RA motor module has a USB Micro-B interface for an external power supply. A USB power pack or car charging cable can be used for longer observation sessions. Optional STAR BOOK ONE control The STAR BOOK ONE is a multifunctional and intuitive control that tracks in the RA and DC axis with a range of different speeds. The tracking options are designed for time lapse cameras at a wide range of speeds, including sidereal, lunar and solar rates. The control also offers many useful functions such as backlash compensation, autoguider port, PEC and a built-in red LED light. The STAR BOOK ONE control is designed for the AP-SM mount and is an integral part of the RA motor module. ED80Sf optical tube An apochromatic refractor that reduces colour defects to a minimum. Specifications: ED80Sf Lens: 80mm ED 2-lens apochromat, multi-coated Focal length: 600mm (F7.5) Resolution and limiting magnitude: 1.45 arc seconds; 11.3 Light-gathering power: 131x Dimensions and weight: (OD) 100 mm x (L) 570 mm; 3.4 kg Finder scope: 9x50 mm finder scope Adapter and connections: 42 mm for T-mount and 31.7 mm with flip mirror; 50.8 mm option* APP-TL130 tripod The compact APP-TL130 tripod is adjustable between 60 cm and 130 cm and combines the portability of a camera tripod with the strength of an astronomical telescope tripod. The tripod can be switched between rubber and metal spikes to prevent floor damage in indoor spaces. FEATURES Ideal for air travel Collapsible travel mount with manual fine adjustment Lightweight and transportable Upgradable motor set High-quality ED refractor with 80 mm lenses High sharpness and contrast Total weight: 14.3 kg DELIVERY CONTENT ED80Sf ED refractor telescope AP mount APP TL 130 tripod Flip mirror 9x50 mm finder scope Tube clamps Dovetail adapter Aluminium case

SX2WL A105M II complete telescope set with mount, tripod and eyepieces This high-quality refractor telescope set impresses with its 105 mm achromatic optics. You will be amazed when you use it to observe the surface of the moon with its craters or Saturn with its ring system. The long focal ratio of F9.5 ensures only slight colour shifts and good contrast. The telescope is manufactured in Japan and impresses with its excellent workmanship. The optics are therefore highly recommended for beginners and advanced users who value high quality and do not want plastic in the processing, because the telescope is made entirely of metal. The large focuser, which is also used on the large SD refractors, allows even heavy cameras to be attached without tilting. The supplied flip mirror allows convenient observation even in unfavourable viewing situations and also offers a T2 thread for connecting a DSLR camera. You will be amazed at what you can see in the sky with an aperture of 105 mm. For example, you can observe the rings of the planet Saturn wonderfully with it. On a good night, the two bright cloud bands and many smaller details, such as the large red spot on the planet, are also visible on Jupiter. On moonless nights, you can observe the Andromeda Nebula, Orion Nebula, Eagle Nebula, Lagoon Nebula and many other interesting objects. Furthermore, fainter celestial objects also become visible with this aperture. Depending on the darkness of the sky, the globular star cluster M13 can even be resolved into individual stars. The sturdy metal tripod allows the telescope and mount to be mounted without vibration, even in windy weather.The ultra-modern SX2WL mount is simply operated via a Wi-Fi module with your smartphone or tablet.By simply controlling the mount with your smartphone or tablet and using the free STAR BOOK Wireless app, you can easily use sky navigation functions such as automatic GoTo panning for many celestial objects. By eliminating the conventional LCD display (STAR BOOK TEN), the power consumption on the mount is reduced by up to 20%, thus enabling longer astronomical observation and astrophotography.When you touch the desired celestial object on the star chart, it is automatically pointed into the telescope's field of view and tracking begins.NOTE: An existing STAR BOOK TEN or ONE controller can also be used on this mount without any problems.Equipped with the same precision stepper motors as the top model, the AXD mount, the SX2WL brings a new standard of performance and precision to the Vixen mount family.With a photographic load capacity of 12 kg, the axis cross of the mount is just 7 kg light, making it ideal for mobile observations. In addition, the motors mounted in the lower part of the mount also serve as a counterweight and the mount therefore requires fewer weights for balancing.The SX2WL mount in detailPrecision stepper motors and micro-step motion control systemAt the heart of the SX2 are the precision stepper motors, which offer better performance and response than previous models. The micro-step motion control system scores with powerful yet very smooth drive characteristics, which are present in both fine movements and fast pans.Built-in bearingsThe bearings of the RA and DEC axes and the worm shafts have been significantly improved to reduce the load on the motors. As a result, the motors move much more smoothly than in previous models.High-precision worm gearsHigh-precision processing technologies eliminate worm gear errors. The running surfaces of the two worms and worm wheels are manufactured to be particularly smooth, enabling very precise tracking.Declination axis as counterweightThe massive motor units are installed in the lower part of the declination axis so that the center of gravity of the SX2WL is below the intersection point of the RA and DEC axes. This means you need fewer additional counterweights.Latitude adjustmentThe latitude is adjustable between 0 and 70 degrees (divided into 3 zones and adjustable in +/- 15 degrees per zone, for high, medium and low latitudes); latitude scale in 2-degree increments; fine adjustment with a tangent screw head, approx. 0.8 degrees per turn.The wireless module in detailThe Vixen Wifi adapter for EQ mounts allows you to control your Vixen mount via a smartphone or tablet. With the smartphone app "STAR BOOK Wireless" (free of charge) you can navigate the sky without any cables. The "STAR BOOK Wireless" smartphone app transforms your smartphone or tablet into a control unit for the equatorial mount in no time at all. The response delay of the mount, which is considered the biggest disadvantage of wireless connections, has been reduced to a level comparable to wired connections.Reduced power consumption compared to conventional controllers with LCD monitorThe power consumption of the mount is reduced by up to 20%, allowing longer observations than with conventionalwired controllers such as the STAR BOOK TEN.Operation similar to the STAR BOOK TEN control unitThe STAR BOOK Wireless app has a similar structure to the STAR BOOK TEN control system. Depending on the star map setting, it contains up to 259,000 celestial objects. Tap on a celestial object in the object list and start the GoTo.The mount will now automatically move to this target and bring it into the telescope's field of view.All the popular features of the STAR BOOK TEN are retainedConvenient operationWhen looking through the telescope operate the mount by swiping on the app's star chart. As there are no buttons, simply slide your finger over the star chart to operate the mount conveniently.Extensive astronomical data includedIn addition to data on easily observable celestial bodies such as Messier objects, NGC objects and IC objects, this also includes the sun, moon, planets, comets and dwarf planets.High-precision alignmentBy aligning the mount to one or two stars, you can already achieve fairly precise positioning of the mount. By aligning to three or more stars, you can achieve high-precision alignment of the mount for high magnifications. The objects are then approached precisely and centrally in the field of view of your telescope. The alignment information is saved and can be retained even when the device is switched off. By leaving the telescope in its current state after completing an observation without moving it, you can start the automatic installation with the same settings for the next observation.Individual setting optionsAs with the STAR BOOK TEN controller, the app offers various individual settings, such as gear backlash compensation, night mode in red, autoguider, variable GoTo speed and LED brightness. You can also set the timing of the reversal of the objective tube (meridian flip) as required.Even if the object moves to the south during tracking, you can prevent the telescope tube from reversing.Important information: Cannot be used on old SX mounts with the old blue star bookTechnical informationCPU with 32-bit CISC processor 120 MHzThe unit is connected to the mount via a D-SUB 9PIN connector as with the Starbook Ten.It has a 6-pin 6-wire modular connector for external autoguider operation.Supported operating systems are Android 6 or higher, iOS 9.0 or higher, WLAN standard: IEEE 802.11b/g/n・FEATURESTelescope A80MfObjective lenses: 105 mm, achromat, coatedFocal length: 1000 mm (f/9.5)Resolution and limiting magnitude: 1.1 arc seconds; 11.9Light gathering capacity: 225xDimensions and weight: (OD) 115 mm x (L) 1110 mm; 4.8 kgViewfinder telescope: 6x24 mmAdapter and connections: 60 mm thread; 31.7 mm connectionSupplied accessories: 31.7 mm star diagonal, NPL20 mm and NPL6.0 mm eyepiecesPhotography: primary focus and eyepiece projectionSturdy metal focuserSX2WL mountRA Gear rim: 180 teethDEC gear rim: 180 teethBearing: Carbon steel / Decl. 35 mm, RA 40 mm thicknessFine height adjustment: 0° to 70°, (fine adjustment +/- 15°, height)Counterweight rod: 20 mm diameterAzimuth adjustment: Fine worm adjustmentPower supply: DC12 V; 0.4~1.7 AMaximum load: 12 kg, photographic, without counterweightCounterweight: 1x 1.9 kgTripod connection: 45 mm spigotDimensions: 36 cm (H) x 12 cm (W) x 36 cm (L)Weight: 7 kg, without counterweight32-bit CISC processor 120 MHzOperating system: Android 6 or higher, iOS 9.0 or higherConnection: D-SUB 9PIN plugAutoguider input ST4Power consumption SXD2WL+Wireless unit: DC12V / 0.3-2.0 A (load 10 kg), 0.4-2.2 A (load 15 kg)SCOPE OF DELIVERYSX2WL mountWireless UnitCounterweight: 1.9 kgMounting toolCigarette lighter cableA105M II refracting telescope31.7 mm zenith prism2 eyepieces: NPL20mm and NPL6.0mmTube ringsDovetail mount6x24 mm finder scopeSXG aluminum tripodSXG pier extension

The declination body unit allows you to expand the AP Photoguider to a complete equatorial AP mount with mototized RA and DC axes. You can move and track the mount in both axes. In addition, you will need the Manual Fine Adjustment Module, or the DEC motor module, as well as the AP counterweight rod and a counterweight. The counter weights of the SX mount series can all be used on the counter weight rod. The APZ counter weight can also be attached to this unit. The built-in battery compartment serves as an additional power supply and is powered by 4 AA batteries.  FEATURESExtends the AP Photoguider to an EQ mount Allows the DC motor module to be attached Built-in power compartment for 4x AA batteries Makes guiding in RA and DC possible SCOPE OF DELIVERYAP declination body Mounting screws Mounting tool

The shutter cable was designed for time-lapse recording with the POLARIE U Star Tracker and a digital camera. When used in conjunction with a special app for the POLARIE U, you can control the shutter via SMS and your smartphone. REQUIREMENTS: POLARIE U Star Tracker, smartphone, POLARIE U control app and shutter release cable for your camera FEATURES Connection to the POLARIE U: 2.5 mm stereo mini plug Connection to the camera: 10-pin remote terminal plug For Nikon, Fujifilm camera connection Spiral cable length: 20 cm to 50 cm Weight: 29 g DELIVERY CONTENT N10 shutter release cable

The Vixen SX 60 mm to 50.8 mm adapter sleeve can be screwed on to the thread of a 60-mm focuser for connectionto a 50.8-mm (2") sleeveFEATURES Adapts 60-mm focusers for 50.8-mm eyepieces or flip mirrors. Compatibility: All Vixen OTAs with 60-mm connection Length: 10 mmWeight: 65 gPACKAGE CONTENTS60 mm to 50.8 mm adapter sleeve

This release cable was developed for taking time-lapse recordings with the POLARIE U Star Tracker and a DSLR camera. In combination with an app specially developed for the POLARIE U, you can simply set up an exposure control via WIFI, controlling your exposures very easily using your smartphone.REQUIREMENTPOLARIE U Star Tracker, smartphone with the POLARIE U Control app and release cable for your cameraPROPERTIESLocking cable for Canon, Fujifilm, Olympus, Pentax, SamsungConnection to the POLARIE U: 2.5 mm stereo mini plugConnection to the camera: 2.5 mm stereo mini plugCoiled cable length: 20 cm to 50 cmWeight: 26 gWHAT'S INCLUDED:Release cable

SXP2 mount with VC200L telescope This telescope set has everything you need to observe the night sky. It includes a telescope, a mount with automatic tracking, a tripod and two eyepieces. The SXP2 mount comes with the new STARBOOK TEN controller and the PFL-II polar viewfinder, which allows you to configure the mount quickly and easily via reference stars. The VC200L was designed for photography and renders a sharp and high-contrast image to the edges of the camera chip. It produces stunningly sharp images of the galaxies and nebula. The telescope set also offers outstanding visual performance and produces sharp images without chromatic aberration. It also produces impressive images of the moon's craters and Saturn's ring system. The mount can be operated fully automatically and finds celestial objects automatically.The SXP 2 mount in detailStrong mount housingCompared with previous models, the new SXP2 mount features larger bearings in order to increase the accuracy and load capacity.The mounting housing is made from a stronger material than the previous SX mounts.The equatorial head is clamped into a fork in order to increase the stability of the polar alignment wedge.Precise tracking with P-PEC functionThe SXP2 mount comes with the modern STARBOOK TEN control system. This includes a P-PEC function for precise tracking. PEC stands for ''Periodic Error Corrections'' and corrects errors in the mechanics which lead to periodic errors in the gear systems. The P-PEC function, which is based on the PEC function, is designed for the SXP2 equatorial mount. The P-PEC function saves the records of corrections, even after the power supply to the mount has been switched off. It is not necessary to re-enter the data each time, which enables a quicker setup and more precise tracking.The belt drive system minimizes backlash and noiseConventional motor-driven systems on equatorial mounts use gear wheels, which are driven by the motor. However, this design generates backlash under the gear wheels, which can lead to inaccuracies.To avoid these errors, the drive was converted to a belt drive system. This drastically reduces the backlash of the gear unit, as well as the noise generated by the drive system. It also ensures a quicker reaction when corrections are required.16 bearingsThe mechanical parts contain a total of 16 bearings.The SXP2 mount uses a set of tapered roller bearings for the RA axis in order to provide additional stability for more precise tracking.Stable polar alignment wedgeThe SXP2 mount uses the same fork as the heavy AXJ mount. This new construction enables a quick and stable configuration of the latitude setting.Simple and precise polar alignment via reference starThe 6x20 polar finder scope is pre-installed. This allows the user to configure the polar alignment (for both the northern and southern hemispheres). The polar finder scope has a variable illuminated reticle with an automatic power-off function. The brightness can be adjusted in 8 levels so that the user can configure the desired brightness.The polar finder scope can be configured directly via three reference stars and can reach an accuracy of up to 3 arc minutes.Variable mount headThe mount head has a diameter of 35 mm and features 8 threaded holes for M8 screws spaced at 45 degrees. An optional accessory tray can be attached to the mount head directly or in combination with an optional mounting wedge for dovetail plates. The threaded holes on the mounting head can also be used to mount rails from other manufacturers. Modern STAR BOOK TEN controller with high-resolution colour display and built-in star chartThe STAR BOOK TEN controller is a modern control system with a high-resolution colour monitor.The STAR BOOK TEN system contains more than 272,000 celestial objects, including 260,000 stars from the SAO catalogue, 109 Messier objects, 7840 NGC objects and 5380 IC objects, as well the soon, moon and planets. Objects can be accessed by name, and information such as images and data can be defined separately.A combination of innovative, elegant design and user-friendly featuresThe improved design of the stable and rigid mount body, which features precise tracking with a P-PEC function and STAR BOOK TEN control system, offers a highly precise, easy to use mount that is guaranteed to please astrophotographers and observers.Special motor mount for lighter counterweightThe heavy RA and DEC motor units are built into the bottom of the declination axis to ensure that the centre of gravity of the equatorial head is below the RA and DEC axis. This enables the declination body to function as a counterweight. Thanks to the flat mounting head, the mount can be balanced with a significantly lighter counterweight.Retractable counterweight barThe counterweight bar is made from solid stainless steel with a thickness of 20 mm, and enables the use of all counterweights from the SX and GP mount series. The counterweight bar is housed in the declination body.The VC200L in detailAstrophotographers generally use two different focal lengths: Short focal lengths for overview photos and extensive deep-sky objects, and long focal lengths for objects which are further away. Our aspherical mirror optics offer the perfect solution for these scenarios. The VISAC primary mirror (Vixen Sixth-Order Aspheric Cassegrain) is specially designed for astrophotography and provides a fully flat and true-colour image over the entire image frame. Thanks to the three-element field corrector in front of the convex secondary mirror, there is no spherical aberration, coma or field curvature. Although the device is designed for astrophotography, it is also suitable for visual observations.FEATURES Mirror: 200 mm (8 inches) Photographically optimised system with flattenerFocal length: 1800 mmResolution and limiting magnitude: 0.58 arc seconds; 13.3 magLight-gathering power: 816 xDimensions and weight: 232 x 600 mm, 6.9 kgAdapter and connections: 31.7 mm sleeve, 60 mm thread109 Messier objects, 7840 NGC objects and 5380 IC objectsModern controller with high-resolution monitorIntegrated star chart and moon programBuilt-in autoguider input (ST4 port)DELIVERY CONTENTVC 200 telescopeSXP2 mountSTARBOOK TEN controllerMounting toolSXG-HAL130 tripod2 counterweights (1.9 kg and 3.7 kg) 7x50 finder scope Folding mirror Carry handle Dovetail barDovetail adapterV 20 mm and SLV 9 mm eyepiece

The Vixen Space Eye: Excellent value for money for beginners in astronomy. With the Space Eye 70/700 beautiful observations of the moon, planets and bright deep-sky objects are possible. With the generously dimensioned, adjustable aluminium tripod and vibration minimizing mount, stars can easily be followed or observations in nature can be made. First observations will be an unforgettable experience ! The Vixen Space Eye 70/700 is a entry level astronomy system. With 70mm aperture, many observations of the starry sky are already possible. Beside moon and also the big planets show some details, like the ring on the planet Saturn and also bright deep sky objects like the Orion Nebula become visible. With two eyepieces, star diagonal mirror and fine movements this set is completely equipped and due to the standard eyepiece connection of 31,7mm a large optional accessory program is available. In addition, this telescope set is also excellent for earth observation! The accessory tray for eyepieces etc. , allows you to place the accessories directly on the tripod and thus provides quick access to eyepieces and other small parts needed. The stable aluminium tripod is height adjustable from 70 to 127cm and carries the mount safely and with low vibration. FEATURES Entry level telescope for moon, planet and earth observation Easy to use azimuthal mount with fine adjustmentVery lightweight, compact and transportableThe perfect start into the world of astronomyAlso excellent for childrenLunar craters can be observed in detail Planets show some details, like the ring on SaturnBright deep sky objects like the Orion Nebula become visibleAchromatic 70mm lensFocal length: 700mm, F/10Eyepieces PL10mm (70x) and PL20mm (35x) included Azimuthal mount with fine movement Tripod extendable from 70 to 127cm Weight: 3,1 kgSCOPE OF DELIVERY Space Eye 70/700M Telescope 5x20 viewfinder Compass Eyepieces: PL20mm and PL 10mm (31,7mm / 1.25inch)Star diagonal mirror (31,7mm/1.25inch)Aluminium tripod Azimuthal mount with fine adjustment Accessory tray

The Vixen POLARIE is a new camera accessory, that enables you to capture sharp, point-like images of the stars. It has been developed to track the stars and to compensate for the movement of the earth. POLARIE enables you to take atmospheric shots of landscapes and the night sky and can also capture these in sharp images. Extremely simple and compact design for use in every location on earth. If you have ever viewed a romantic, starry sky, you will surely have felt the desire to capture it on film. But if you have tried to do this, you will know that it’s really not all that easy. This is because you need to have multiple exposures of several minutes if you want to photograph the stars. As our earth is always turning on its axis, the stars keep moving as time passes and become long strokes on photographs. Today’s digital technology gives us the option of obtaining shorter exposure times by increasing the sensitivity of the sensor, but, unfortunately, this dramatically increases picture noise and the picture becomes very noisy and ugly. This makes it impossible to take beautiful images of the night sky. For this reason, the Vixen company has developed the Polarie Star Tracker, which eliminates the problem of star migration. When you attach your camera to the Polarie, the device will track in the opposite direction of earth’s rotation and this allows for sharp, point-like images of the starry sky even when using long exposure times. POLARIE is a new and unique camera accessory for photographing the night sky, with perfectly point-like stars being tracked. Using the simplest solution, it makes the experience of photographing the night sky more accessible for everyone. The multi-functional mode dial is adjustable for sky- and landscape-, moon-, sun- and star-tracking. Polar altimeter for a fast focus. Also included: USB connection for external power supply and a built-in compass for quick orientation. Available as optional extra accessories are a polar finder telescope for exact alignment with the celestial pole for long-exposure photography including into the telephoto range, and a tripod. FEATURES Tracking speed: Sidereal, 0.5x sidereal, sun, moon Fine adjustment: F57, 6mm worm wheel with 144 teeth Polar axis: F 40mm, aluminium alloy Drive: High-precision stepper motor: Bearing capacity: approx. 2kg incl. ball head Orientation aperture: Field of vision 8.9° vInclinometer: 0° to 70° Miscellaneous: Built-in compass (removable) Power supply: 2x AA batteries (compatible with alkaline, Ni-MH, Ni-CD batteries) or external power supply compatible with USB mini-B Drive voltage: AA batteries: DC2,4-3.0V, Max. 0.6A External power supply: DC4,4-5,25V, max. 0.3A Operating time: approx. 2 hours with alkaline batteries Approx. 20 hours with external power supply at 20°C with 2 kg load Operating temperature: 0° to 40° Dimensions: 95mm x 137mm x 58mm Weight: 740g without batteries Optional accessories available: Polar finder telescope, M-155 tripod, QPL compass, ball head WHAT’S INCLUDED 1x camera mount