BRESSER ClimaTrend Hygro Indicator 3-piece Set Thermo-Hygrometer
£23.99*
The ideal room climate not only has positive effects on our well-being, it is also good for our health. The two critical values which determine the room climate are temperature and relative humidity.If for instance the humidity is too low the effects can be burning eyes, chapped lips as well as dry nasal mucosa, which reduces our ability to provide protection against inhaled pathogens.
On the other hand, if the humidity is too high there is a risk of mould formation. This can also be prevented thanks to the indicator.
With the practical 3 piece ClimaTemp Thermo Hygrometer Indicator you now have the control over the room climate in all the rooms you spend most of your time in (e.g. living room, bedroom and children's room). Next to the exact measured values for the room temperature (C°) and humidity (%) the indicator also shows in symbolic form, whether these values are within the recommended range or if there is a need for action. FEATURESTemperature display in °CAir humiditySymbolic room climate indicatorEarly prevention of mouldMounting type: stand, wall mount and magnetSCOPE OF DELIVERY3x Thermo / Hygro Station3x CR2032 batteriesmanual
BRESSER Precision Thermo-Hygro Sensor
£33.99*
This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre.
Compatible with the following BRESSER weather stations:
7003200, 7003210, 7003220, 7003230, 7002580, 7002585, WSX1001, 7902535, 7902534, 7002541, WSX3001, 7003500, 9080600, 7002586, 7006300, WSH4102, 7003600, 7003300, 7003510, WSX5003, 7003100
FEATURES
Temperature measurement function
Humidity measurement function
7 available channels
Built-in display, can also be used as a standalone solution without a weather centre
Temperature range: -20 ~ 60℃
Wireless frequency: 868 MHz
Ultra-long range of up to 150 m
Battery-operated with 2x AA batteries (not included)
DELIVERY CONTENT
Outdoor sensor
Instruction manual
BRESSER Thermo-Hygrometer with Mould Alert
£23.99*
When it comes to your well-being, don't settle for less – this includes maintaining a healthful environment. Keep your indoor climate in check with the BRESSER Thermo-Hygrometer with Mould Alert. It accurately measures temperature and humidity and impresses with comprehensive warning functions. You'll always know when to heat, ventilate, humidify, or dehumidify.
Mould prevention made easy – with the BRESSER Thermo-Hygrometer
Especially in older buildings or during the cold months, it sometimes creeps into the basement or living area: mould. This temperature and humidity measuring device warns you when the conditions for mould growth are particularly favourable. So with the thermo-hygrometer at your disposal, you can swiftly and efficiently take measures to ward off mould in your environment.
Thermometer and hygrometer with handy alert features
This BRESSER Thermo-Hygrometer quickly becomes an invaluable guide for your well-being. The clear display shows the integrated heat warning, which alerts to unfavourable levels of high temperature and humidity. Ideal for individualists: set a personalised humidity alert to be informed when your specific humidity thresholds are crossed.
Take control of your indoor climate now - with the BRESSER Thermo-Hygrometer with Mould Alert!
FEATURES
Thermo-Hygrometer with mould and heat warnings
Measures indoor temperature and humidity
Five-level colour-coded climate indicator
Graphical humidity trend history
High/low humidity alarm settings
Battery-powered: 2x AAA (Micro), 1.5V (not included)
SCOPE OF DELIVERY
Thermo-Hygrometer
Instruction manual
BRESSER Wi-Fi Colour Weather Station with 5-in-1 Professional Sensor
£159.99*
FEATURES5.7'' colorful display for time and detailed weather informationWIFI connection with internet time synchronizationReceives weather data from 5in1 profi sensor and from wireless thermo-hygro sensor via 868 MHz transmissionPublish local weather station data on weather underground and weather cloudDisplays time, calendar, weekday and moon phaseAlarm clockIce pre-alert functionIndoor temperature (°C/°F) and humidity with comfort indicationOutdoor/Channel’s temperature (°C/°F) and humidity readingsGust or average wind speedWind direction (16-direction indicator)Rain rate (hourly, daily, weekly, monthly, total rainfall)Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy)Barometric pressure in relative or absolute readings (hPa, inHg, mmHg)Smart outdoor “Feels like” sensation readingWeather index for outdoor feels like, dew-point, Wind chill, Heat indexMax/Min memory records and past 24 hours (hourly record)Hi/Lo alert with flash LED indicatorWeather calibration (on set-up UI)3-mode brightness: Hi / Lo / Off7 languages for weekday (EN/ DE/ FR/ ES/ IT/ NL/ RU)Support firmware update (TBC)Support a wireless 5-in-1 professional weather sensor (Included)Support up to 7 pcs wireless extra sensors (Optional) (item no. 7009999)
DELIVERY SCOPEMain unitProfessional 5in1 sensor incl. mounting material100-240V/50 Hz power adapter and cable
BRESSER Thermo-Hygro Sensor 7 Channel 868 MHz
£33.99*
Remote sensor for measuring of temperature and humidity. Seven channels settable. With extra long radio range of 150 meters on a radio frequency of 868 MHz.
Good news for Smarthome owners: The sensor can be connected to the system of the market leader Tuya.
Suitable for the following BRESSER weather stations: 7902535, 7002541, WSX3001, 7003500, 9080600, 7002586, 7006300, WSH4102, 7003600, 7003300, 7003230, 7003210, 7003200, 7003220, 7003510, WSX5003, 7002531, 7002571, 7003100
Compatible with the following BRESSER weather stations, but exclusively with firmware version V1.11 or higher (download available on the product page of the BRESSER homepage): 7002580, 7002581 und 7002585/WSX1001
FEATURES
Temperature measuring
Humidity measuring
7 channels settable
RC frequency: 868 MHz
Extra long radio range of 150 meters!
Suitable for smarthome systems by Tuya
Powered by battery; 2x AA (LR6) (not included!)
SCOPE OF DELIVERY
Remote sensor
BRESSER Radio-Controlled Colour Weather Station with Frameless Display
£33.99*
With the BRESSER Radio-Controlled Colour Weather Station with Frameless Display, you’ll always be on the sunny side of weather technology. The chic colour screen presents all important information at a glance: temperature, humidity, and a reliable weather forecast. The modern, frameless design integrates stylishly into your home, office, and more.
Your reliable planning assistant – the weather station with forecast
The graphical weather forecast of the radio-controlled weather station reliably informs you about upcoming weather changes. A practical addition: the current air pressure is also displayed, allowing you to keep track of weather developments through regular checks. Perfect for planning your activities better and always being prepared.
Room climate in perfect condition – with the radio-controlled weather station
The weather station with outdoor sensor measures not only temperature and humidity outside your door but also provides accurate values for the indoor area. Additionally, the room climate comfort indicator shows the condition of the indoor air. This way, you can ensure a pleasant atmosphere in your home or other indoor spaces.
Powerful outdoor sensor for precise data
The outdoor sensor of this weather station impresses with user-friendliness and robust design. With a range of up to 80 m, the ideal location is quickly found. You can also read the values directly on-site on the integrated display. Additionally, the casing is water-resistant (IP44), so the temperature and humidity meter can withstand wind and weather.
Appealing weather station with useful features for everyday life
The radio-controlled colour weather station impresses with practical functions such as a frost warning, which alerts you to cold temperatures in good time. The high/low value alarm also automatically informs you of your own temperature limits. With the max./min. value memory for temperature and humidity, you can easily keep track of fluctuations.
Chic and informative – look forward to always precise weather data with the BRESSER Radio-Controlled Colour Weather Station with Frameless Display!
FEATURES OF THE BASE STATION
Frameless weather station with integrated DCF radio clock
Indoor temperature and humidity
Display of outdoor temperature and humidity
Graphical weather forecast
Air pressure
Room climate comfort indicator
High/low value alarm for temperature
Max./min. value memory for temperature and humidity
Frost warning
Automatic time and date setting (DCF, manual setting possible)
Alarm clock with snooze button
Power supply: mains adapter (included), 2x AAA backup batteries (not included)
PLEASE NOTE: This device receives the DCF time signal (Central European Time). However, you can easily adjust the time display to different time zones using the manual time setting.
FEATURES OF THE RADIO SENSOR
Measurement of temperature and humidity
Clear LCD display
Range: up to 80 m
IP protection class: IP44
Dimensions: 71 x 65 x 23 mm; Weight: 44 g
Battery-powered: 2x 1.5V AAA batteries (not included)
SCOPE OF DELIVERY
Weather station
Outdoor sensor
Operating instructions
BRESSER 7-in-1 Exclusive Weather Station ClimateScout RC
£122.99*
An exclusive Bresser designed weather station, the BRESSER 7-in-1 Weather Station ClimateScout RC Weather Station. A quick glance in the morning onto your BRESSER weather station gives you all the weather information you need for the day. Your current local outdoor temperature and humidity are shown as well as the current wind speed and direction. How much did it rain during the night? These and many others of the frequently asked weather questions are answered by a quick look onto the main station's display. Have you ever wondered why temperatures feel differently outside then you had imagined it would feel like? The new Feels Like Feature will help you with that. It takes the heat index or windchill into consideration and provides a calculated result to give you a much better indication of how the current weather actually feels outside. It sure beats running in and out and having to change clothing. The Wind Gauge has been optimized and now measures in 360° and 16 directional points, giving you very precise wind readings. Furthermore, the radiation shield has been upgraded to enhance the temperature and humidity sensor circulation. All in all this 7-in-1 complete set of weather station main unit and professional 7-in-1 weather sensor is the perfect weather station for those that want accurate and up to date information. FEATURES (main unit):Clear professional display for time & full weather information Receive your local weather data via the 7-in-1 weather sensor via 868 MHz RF
transmission frequency RCC time synchronization & automatic switch between standard and daylight saving time (DCF) For UK Users who can receive the European DCF time synchronization signal the time can be automatically received using the UK time offset functionBuzzer alarm clock with ice pre-alert function Display time, calendar, weekday & Moon phaseAble to set the moon phase display for Northern / Southern hemisphere Buzzer alarm clock with ice pre-alert function Indoor temperature (°C/°F) & humidity readings with comfort indication & trend Outdoor temperature (°C/°F) & humidity readings with trend Gust or Average wind speed (mph, m/s, km/h, knots), Beaufort & wind level Real time & dominant wind direction in 360° & 16-direction resolution UV index (0 – 16) Light intensity reading (Klux, Kfc, W/m2) Measure Rain rate, Hourly, Daily, Weekly, Monthly, Total rainfall (in/ mm) with
indicator Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy) Barometric pressure in relative or absolute readings (hPa, inHg, mmHg) Weather index for outdoor feels like, heat index, wind chill, dew point readings Max / Min memory records & past 24hrs hourly record Hi / Lo alert setting (indoor/ outdoor temperature & humidity) Alert setting (weather index, High wind-speed, High daily rainfall & Pressure drop) Flashing indicator for Hi/Lo alert warning on the LCD display UV and light calibration 5 languages for weekday and wind direction display (EN/ DE/ FR/ ES/ IT) Amber backlight Long-range transmission up to 150m (450 ft.) Supports up to 3 pcs wireless extra sensors , for instance 7009999 Thermo-/Hygrometer Outdoor Sensor, Pool Sensor SP6001LC2000, or Soil Sensor SP60020LC2000 (Not included) Wall mount/ desktop usage Product size: Main unit: 180 x 136 x 23 mm (W x H x D) Display VA size: 125x77mm (W x H) Battery requirements: Main unit: 4x AA ; Sensor 3x AA (Not included)FEATURES (7-in-1 SENSOR)Measurement of Outdoor Temperature and Humidity, Wind Speed and Direction, Rain Gauge, UV and Light Intensity MeasurementUp to 150 m transmission range using 868 MhZ transmission frequencyShould be placed in an unobstructed location so that sun and rain data can be used properlyCan be mounted on wall or post using the included adapterProduct size: Sensor: 344 x 394 x 136 mm (W x H x D) SCOPE OF DELIVERY1x Main Unit, additional main units can be purchased using the BRESSER item codes 7003110CM3000 (black housing), 7003110GYE000 (white housing), 700311QT5000 (grey housing)1x wireless 7-in-1 Professional Weather Sensor including mounting stand
NATIONAL GEOGRAPHIC VA Colour LCD Weather Station incl. 3 Sensors
£70.99*
The NATIONAL GEOGRAPHIC VA colour weather station with 4 measuring points in black displays all relevant weather data at a glance. The set includes 3 outdoor sensors and one built-in sensor. On the clearly arranged colour display you will find information such as temperature and humidity for indoor as well as outdoor, as well as the exact time via DCF radio transmission. Besides the built-in sensor in the console unit (display) the station is able to receive the temperature and humidity readings from three additional sensors which are included in this set. Its use is therefore very versatile as the sensors can be placed either in- or outdoors. What's the temperature in the kids room, is the basement too moist how cold is it outside? All these questions can be viewed on one display. The station has a time offset function, so although parts of the UK are technically able to receive the European DCF time signal (southern England), your station will be displaying the UK time. For all parts of the UK where the time signal can not be received the time can easily be set manually with this station. The featured weather forecast is for the coming 12-24h. FEATURES BASE STATION LCD colour display Indoor temperature (°C/°F) and humidity Outdoor temperature (°C/°F) and humidity Display of time, date and weekday Time by DCF radio signal with time offset function for the UKWeather Forecast Maximum connectable sensors: 3 (3x included!) Hanging device and stand Power supply: Power plug with UK adapter (included) FEATURES SENSOR Measurement of outdoor temperature (°C / °F) and humidity LCD displayRange up to 80 m Can be placed on a table or wall-mountedPower supply: 2x AAA batteries per Sensor (not included) Dimensions: 71 x 65 x 23 mm; weight: 44 gSCOPE OF DELIVERY Weather station 3x outdoor sensors Instruction manual
BRESSER Weather Station ClimateTemp NDV-NEO
£55.99*
With the BRESSER Wireless Weather Station ClimateTemp NDV-NEO, you are always prepared for the climatic conditions both in front of and behind your front door. The weather station reliably measures the temperature and humidity both indoors and outdoors and provides you with a precise weather forecast. In addition, the device looks really stylish. Practical additional features such as frost warning and temperature alarm help you navigate through your daily weather-related challenges.
Stay up-to-date with reliable weather forecasts!
Do you need an umbrella today or maybe sunscreen? With the graphical weather forecast of the BRESSER weather station, you will know right away and can plan your activities accordingly. You can also keep an eye on the weather trend with the air pressure display with history.
Top indoor climate thanks to the weather station for home and more.
Only where humidity and temperature are right can we feel comfortable in the long run. That’s why the base station of the ClimateTemp NDV-NEO has an integrated thermo-hygro sensor. This allows you to easily monitor the indoor climate in your home or office: Just regularly check the precise measurements for indoor temperature and humidity and adjust your ventilation habits accordingly. This way, you can prevent mold growth and overly dry air and breathe easy!
Weather station with outdoor sensor: Weather information first-hand
A real powerhouse of the weather station is the high-quality sensor. It reliably measures the outdoor temperature and humidity, with the high range of up to 80 meters offering a lot of flexibility in positioning. The data can also be read directly on the integrated display. So you can get an update quickly even in the garden or on the terrace. Moreover, the sensor is water-resistant to IP44 – ideal for outdoor use.
Weather station with cool features for hot and cold days
The BRESSER wireless weather station has many useful functions that make your daily life easier. For instance, the frost warning alerts you to frosty temperatures on cool days. You can get an overview of the development of humidity and temperature from the max./min. value storage. And the high/low value alarm notifies you when your chosen temperature limits are reached.
Bring style to your weather forecast – with the BRESSER Wireless Weather Station ClimateTemp NDV-NEO!
BASE STATION FEATURES
Indoor temperature and humidity (°C/°F)
Display of outdoor temperature and humidity (°C/°F)
Graphical weather forecast
Air pressure with graphical history
High/low value alarm for temperature
Max./min. value storage for temperature and humidity
Frost warning
Automatic time and date (manual setting possible)
Integrated alarm clock with snooze function
Moon phase
Power supply: Power adapter (included) and 3x AAA backup battery (not included)
PLEASE NOTE: This device receives the DCF time signal (Central European Time). However, you can easily adjust the time display to different time zones using the manual time setting.
SENSOR FEATURES
Measurement of temperature and humidity
Clear LCD display
Range: up to 80 m
IP protection class: IP44
Dimensions: 71 x 65 x 23 mm / Weight: 44 g
Battery operated: 2x AAA batteries (not included)
SCOPE OF DELIVERY
Base station
1x wireless sensor
Power adapter
User manual
BRESSER 7-in-1 Outdoor Sensor for 7003200 4-Day 4CAST Wi-Fi Weather Station
£122.99*
Falling under the car when moving, taking a knock from a child's football, simply slipping from your hand during installation - even the most robust 7-in-1 wireless sensor is not immune to everyday misadventure. But, even if your outdoor sensor is permanently damaged beyond repair, there's no need to buy a whole new weather station simply to keep an eye on the weather. Your base station can continue to function perfectly. This sensor is the perfect replacement part for your 4-day 4CAST WiFi weather centre. The device is operated in much the same way as you are used to: Start by inserting the batteries (not included). Then, fit the replacement sensor in your preferred location using the installation material supplied. Once everything has been tightened up, all you need to do is connect to your base station (not included). With a replacement sensor, this is not an automatic process; you will needed to press the WiFi/SENSOR button on the console. The console will then start to search for the signal from the sensor. Connected? Then you're done, and you can start enjoying up-to-date and local weather data from your sensor for outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level and light intensity.
Rehabilitate your 4-day 4CAST WiFi weather centre with the replacement sensor.
FEATURES
Measures the temperature and humidity
Measures the wind speed, wind direction and rainfall
Measures the UV level and light intensity
Solar power for longer battery lifespan
Range: up to 150 m
Power supply: 3x AA batteries (not included)
Dimensions: 420 x 170 x 213 mm
DELIVERY CONTENT
Wireless sensor with installation material
Base station not included!
Instruction manual
NATIONAL GEOGRAPHIC Weatherstation Transparent
£27.99*
The National Geographic wireless weather station Translucidus connects large digits on a futuristic-transparent display with a simple and elegant stand. The operating elements have been placed on the rear side for protection, thanks to the transparent display, these are still clearly legible. In addition to the large radio clock time, the display also shows outside- and inside temperature permanently next to each other. A real eye-catcher for every desk. The Weather station can also be used as alarm clock and is equipped with a sleep function. Features
DCF radio clock reception and display
Outdoor temperature (in °C)
Internal temperature (in °C)
Relative humidity (inside ) in %
Thermometer outdoor sensor (1 incl. - up to 3 can be connected) Controls on back
Transparent display
Battery operation via 4x AAA batteries (2x AAA each for station and sensor)
5 year manufacturer's warranty for online registration
Scope of delivery
Weather station
Outdoor sensor
Operating Instructions
BRESSER Soil Temperature and Moisture Meter
£36.99*
This additional sensor allows you to take two additional practical measurements with your BRESSER weather station. In addition to the soil temperature, the sensor can also measure the soil moisture – ideal for plant lovers and gardeners. Measurements are sent to the base station at 60 second intervals. The soil moisture meter can be positioned up to 150 metres away from the base station. There are also 7 different channels to choose from. And thanks to the weatherproof housing, the wireless sensor is able to withstand adverse weather conditions.
Compatible with the following BRESSER weather stations:
7003200, 7003210, 7003220, 7003230, 7002580, 7002585, WSX1001, 7902535, 7902534, 7002541, WSX3001, 7003500, 9080600, 7002586, 7006300, WSH4102, 7003600, 7003300, 7003510, WSX5003, 7003100
FEATURES
Wireless and compact soil sensor
Measures the soil humidity
Measures the soil temperature
Transmission interval: 60 seconds
Extra-long range of up to 150 metres
7 available channels
LED indicator for data transmission
Weatherproof housing
Battery-operated with 2x AA batteries (not included)
DELIVERY CONTENT
Soil sensor
Instruction manual
BRESSER Thermo-Hygro Sensor
£23.99*
Living room, bedroom and children's room, kitchen and of course the bathroom - all benefit from a regular room climate check to ensure optimal comfort. So, enhance your weather station with this BRESSER Thermo-Hygro Sensor, allowing you to monitor conditions at an additional location. The sensor sends data over a significant distance of up to 80 meters, instantly displaying it on your base station's screen.
Wondering if it's really that warm? The sensor includes an LCD display for immediate, on-site verification of current readings. This feature also enables this temperature and humidity meter to function as a standalone thermo-hygrometer.
Compatible with these BRESSER weather stations:
7000023, 7007201, 7004200, 9604200, 7007511, 9600028, 7000012CM3000, 7000012GYE000, 7000013, 9070600, 7000028, 7007402, 9070700, 9604210, 7004210, 7006500, 9604100, 9070300, 9070110, 7007520, 9070710, 7000030, 7007610, 7000002, 7000004, 7000020QT5000, 7000020CM3000, 7000020GYE000, 7001800QT5000, 7001800CM3000, 7001800GYE000, 7007550CM3000, 7007600QT5000, 7000022CM3000, 7007500, 7007501, 9080600, 8020210GYE000, 8020210CM3000, 7004330, 7004340, 7006310, 7000020QT5000, 7000020CM3000, 7000020GYE000, 7004220, 7000027, 7000029, 7000060, 7004350, 7004360, 7004370, 7004380, 7006510, 7007350, 7007620, 7000012CM3000, 7000012GYE000
FEATURES
Measures temperature and humidity
Easy-to-read LCD display
Functions as an independent solution, or as a replacement or supplementary sensor for select BRESSER weather stations
Maximum range of up to 80 meters
IP Protection Class: IP44
Dimensions: 71 x 65 x 23 mm / weight: 44 g
Powered by 2x 1.5V AAA batteries (not included)
SCOPE OF DELIVERY
Thermo-Hygro Sensor
Instruction manual
BRESSER Weather Station 5-in-1, black
£122.99*
The new BRESSER Weather Station 5-in-1 combines in a unique way a compact design with an extensive information service. The very
compact and multifunctional outdoor sensor requires only little space and thus can be placed almost anywhere. A pipe clamp and screws for
the attachment at poles (pipe diameter of about 25-33 mm) as well as a stand are already included!
The 5-in-1 outdoor sensor transfers reliably all measured values for wind speed, wind direction, humidity, temperature and
precipitation rate to the base station. On the clearly structured display of the base station not only these values can be read but also a
multitude of history data. The latter allows the internal storage and evaluation of measured data over a period of 24 hours. From the collected
measured data, the weather station calculates a very reliable local weather trend forecast for the next 12 hours, depicted by six graphic symbols
on the display. For minimum and maximum values an individual alarm can be programmed, which gives an acoustic and a light signal when the defined
value is reached. For outside temperatures of -3 °C and below a special alarm for frost/ice warning can additionally be activated.
A poor indoor climate often involves health risks especially for children and the elderly. The BRESSER Weather Station 5-in-1 offers you a smart feature to deal with this. The indoor climate indicator informs steadily about the indoor climate with a symbol.
Furthermore, the BRESSER Weather Station 5-in-1 features a radio controlled time and date setting (DCF time signal). Already a few minutes after switching the device on the current Central European Time (CET) and the date with weekday are displayed automatically. For the ''moonstruckers'' also the different phases of the moon are shown. An alarm function with snooze mode is also integrated.
FEATURES
5-in-1 outdoor multi sensor
Inside temperature (°C/°F) and humidity
Outside temperature (°C/°F) and humidity
Wind direction and speed
Graphical weather trend display (12 hours)
Beaufort index (scale for the classification for wind speeds)
Precipitation rate with history (day/week/month)
Air pressure with history (24 hours)
Heat index
Dew point
Radio controlled time and date setting
Phases of the moon
Alarm function
Ice/frost warning
Min/Max memory (up tp 24 hours)
LED background light, amber
SCOPE OF DELIVERY
Base station with stand
5-in-1 Multisensor with mounting material
Manual
Additionally, 6 AA batteries are required (not included)
PLEASE NOTE: If you should ever need a new outdoor sensor for this product, please check the LOT number on your device or on the packaging:
Weather Stations with LOT number 1156742 and lower are compatible with the outdoor sensor with item number 7802520.
Weather Stations with LOT number 1156743 and higher are compatible with the outdoor sensor with item number 7802580.
BRESSER Thermo-Hygro Sensor 3CH - Suitable for BRESSER Thermo-Hygrometer
£18.99*
Thermo/Hygro sensor suitable for the BRESSER Thermo/Hygrometer weather station with the article numbers: 95-01200, 95-01201, 95-01202, 7007500 & 70-07400This outdoor sensor for weather stations, article numbers: 7009993, 7009995.FEATURESSuitable for the following BRESSER weather stations: 9501200, 9501201, 9501202, 7007500 & 70074003 channel available433 MHz transmitting frequencyFoldable standIntegrated hole for easy wall mountingRequires 2x AAA batteries (not included)SCOPE OF DELIVERYThermo/Hygrometer
BRESSER Thermo-Hygrometer with Ventilation Recommendation VentAir H
£36.99*
Get a true room climate expert now with the BRESSER Thermo-Hygrometer with Ventilation Recommendation VentAir H. You can easily read on the stylish screen whether it is time for fresh air. Perfect for effectively preventing mould and excessively dry air! Additionally, the high-quality thermometer and hygrometer precisely measure the temperature and humidity indoors as well as outdoors. And with the additional comfort indicator, you can always keep an optimal eye on the room climate.
Intuitive operation and practical functions
Effortlessly achieve the perfect room climate: The thermo-hygrometer with ventilation recommendation is equipped with user-friendly touch buttons. Interested in the highs and lows of your room's air quality? Simply call up the maximum and minimum values for temperature and humidity. This way, you can also keep an eye on the development of your room climate. Always up to date: A clock and an alarm are also integrated into the device.Flexible placement thanks to high-quality outdoor sensor
Whether in the garden, on the balcony, or even in the front yard – the wireless sensor with a range of up to 80 m gives you complete freedom for placement. The integrated display shows the current temperature and humidity values directly on site. Naturally, the wireless sensor is water-repellent, making it perfect for outdoor use.
Ensure fresh air at home, in the office, and more – with the BRESSER Thermo-Hygrometer with Ventilation Recommendation VentAir H.
BASE STATION FEATURES
Ventilation recommendation for easy improvement of room climate
Ideal for early prevention of mould and excessively dry indoor air
Room climate comfort indicator
Outdoor temperature (°C / °F)
Indoor temperature (°C / °F)
Relative humidity (indoor and outdoor) (%)
Time display and integrated alarm
Operation via user-friendly touch buttons on the display
Min/Max value memory for temperature and humidity
With backlight
Thermo-hygro outdoor sensor (1x included)
Battery operated: 3x AAA batteries (not included)
OUTDOOR SENSOR FEATURES
Measurement of temperature and humidity
Clear LCD display
Range: up to 80 m
IP protection class: IP44
Dimensions: 71 x 65 x 23 mm / Weight: 44 g
Battery operated: 2x AAA batteries (not included)
SCOPE OF DELIVERY
Base station
Outdoor sensor
User manual
BRESSER Meteo Temp W Weather Station with DCF Time Signal
£28.99*
Not sure what to wear or whether to apply sunscreen? The BRESSER Meteo Temp W weather station with DCF time signal keeps you up-to-date with the local weather conditions to help you plan ahead. Weather forecast, outdoor and indoor temperature, time and date – the extra large display shows you all relevant data in an easy-to-read format. What’s more, thanks to its stylish and sleek design, the Meteo Temp W fits perfectly in any space.
Weather station with outdoor sensor
The base station can be placed at a distance of up to 80 metres from the wireless outdoor sensor, and displays the outdoor temperature on the built-in screen. When you’re outdoors, you can also view the current temperature on the outdoor sensor’s built-in display.
Monitor the indoor temperature
Thanks to the built-in thermo sensor, the Meteo Temp W weather station also displays the precise indoor temperature to help you maintain a comfortable indoor climate in your living room or study. You can also use the temperature display to help you save energy in the winter: lowering the temperature by 1 degree reduces energy consumption by up to 6%.
Weather forecast function with short-term trend indicator
Sunny, (partly) cloudy, (heavy) rain or snow – the weather station uses six intuitive symbols to display the weather forecast for the next 12 to 24 hours, while the trend arrow shows you the trend for the next few minutes.
Practical frost warning function for cold winter days
The BRESSER weather station also keeps you informed about wintry weather conditions: a snowflake symbols appears on the display when the outdoor temperature falls below 3 °C to warn you about the potential for frosty conditions.
Automatic date and time setting (DCF)
The Meteo Temp W weather station features a date and time display that receives the time automatically from a DCF radio signal (CET time). You can also set the date and time manually to enable use in other time zones.
View the local weather conditions, temperature, date and time with the BRESSER Meteo Temp W weather station!
FEATURES BASE STATION
Temperature display for indoors and outdoors
Radio-controlled time and date (DCF signal)
Graphical weather forecast (12-24 hours)
Frost alarm (when outdoor temperature < 3 °C)
Weather trend display
Large and easy-to-read display - also suitable for older people
Supports up to 3 thermometer outdoor sensors (includes 1x outdoor sensor)
Fold-out stand and wall mount
Battery status indicator for base station and wireless sensor
Required batteries: 2x AAA (not included)
FEATURES OUTDOOR SENSOR
Measures temperature
Easy-to-read LCD display
Maximum range of up to 80 meters
IP Protection Class: IP44
Dimensions: 71 x 65 x 23 mm / weight: 44 g
Powered by 2x 1.5V AAA batteries (not included)
PACKAGE CONTENTS
Base station
Wireless thermo sensor
Instruction manual
BRESSER Thermo Hygro Quadro NLX - Thermo-Hygrometer with 3 Outdoor Sensors
£65.99*
The new BRESSER Thermo Hygro Quadro NLX offers, as with our ClimaTrend Hygro Quadro (Art.-No.: 7000020000000) the possibility to measure temperature and humidity at 4 different measuring points simultaneously. In addition, the weather trend, time and date are shown on the clearly arranged colour display.
The three remote sensors deliver the data to the receiving station via 433 Mhz radio frequency, at the same time the receiving station also measures temperature and humidity and thus delivers 4 measurement results.
The main unit requires a power supply unit (included) for operation. For the remote sensors 6x AAA / LR03 batteries are required (not included).
PROPERTIES
Clear multi-coloured display
Time via DCF radio transmission
Display of date and weekday
wake-up function
4 measurement results for temperature and relative humidity
Early prevention of mould infestation
433 MHz Transmission frequency
Remote sensors are splash-proof, therefore suitable for outdoor use
Thermo/Hygro remote sensor (3x incl.)
SCOPE OF SUPPLY
Thermo- / Hygrometer
3x remote sensor
Power supply
Instruction manual
BRESSER CO² Air Quality Monitor Smile
£122.99*
Endless meetings, urgent work emails, looking after the kids, cleaning the flat… during our hectic lifestyles, it's easy to forget about regular ventilation. Even though we know better: a high CO2 concentration can affect our health and wellbeing. The BRESSER CO2 air quality monitor Smile will show you when it's time to let some fresh air into your home or office. Simply have a quick look at the intuitive LCD display to keep an eye on the CO2 concentration, temperature and humidity. You don't need to worry about remembering what constitutes a critical carbon dioxide level - the intuitive graphical display with a linear scale and smiley face will show you the quality of the air in your surroundings. The measurements are precise, with high resolution and fast. Ventilation alarmThe practical carbon dioxide alarm reminds you when you need to let in some fresh air. If the default setting is different to your ideal indoor climate, you can configure your own limit up to a maximum of 5000 ppm. The alarm function can then be activated with a simple button press. If the preset limit is exceeded, the alarm will sound at a varying intensity depending on the CO2 concentration. The display will also show a flashing arrow symbol to remind you to open the windows. Humidity is also an important factor, as high humidity levels can cause mould to form. You can also set your own visual alarm for this reading so that you will know whether the air in the room is too dry or too moist. If you want to see more than just the current readings, there is also a practical memory function that displays the maximum and minimum values for the last 24 hours as well as the average values from the last 15 minutes and 8 hours for carbon dioxide concentration, temperature and humidity. The device is powered by a power adapter to enable continuous operation. The BRESSER CO2 Air quality monitor Smile - the perfect solution for busy fresh air fans! FEATURESSimultaneous display of CO2 concentration, temperature (°C / °F) and humidity Colour LCD display, clear and intuitive Graphical display of current CO2 concent Carbon dioxide alarm functions: Humidity alarm function Memory function High precision, high resolution, rapid response time Dimensions: 123 x 110 x 32 mm Powered by power adapter, long-term continuous operation possible DELIVERY CONTENTCO2 air quality monitor Power adapter Instruction manual
BRESSER MeteoTemp Baro HZ Colour Weather Station
£47.99*
The BRESSER MeteoTemp Baro HZ Colour Weather Station gives you a comprehensive overview of the local weather conditions and your indoor climate. In addition to measuring the temperature and humidity, it also features a built-in barometer and weather forecast function, as well as other practical functions such as automatic time adjustment and an alarm clock.
Weather forecast function with air pressure indicator
Not sure whether to pack an umbrella? The weather station comes with a weather forecast function, which displays the weather forecast using a series of symbols. You can also view the recent air pressure readings from the built-in barometer to give you a better idea of the latest trends in the weather.
Precise temperature and humidity measurements
Thermometer and hygrometer in one device: the wireless sensor has a range of up to 80 metres and takes precise measurements of the outdoor temperature and humidity. It also features a built-in display, which allows you to view the readings directly from your balcony or garden without returning to the base station.
Monitor your indoor climate
Temperature and humidity are also important indoors – especially in rooms where we spend a lot of time such as living rooms and offices. For this reason, the base station features a built-in thermometer and hygrometer so that you can keep a close eye on the current conditions. It also displays a smiley to indicate how comfortable the room is based on the measured temperature and humidity.
Radio-controlled clock, alarm and more
The MeteoTemp Baro HZ colour weather station comes with a radio-controlled clock, which adjusts the time automatically when the clocks change to summer or winter time. It also features an alarm with 2 individually configurable alarm times, and displays a range of useful data, including the sunrise and sunset times and the current moon phase and tide.
Monitor the local weather conditions, indoor climate and more with the BRESSER MeteoTemp Baro HZ Colour Weather Station.
BASE STATION FEATURES
Weather station with integrated thermometer and hygrometer
Measures the indoor temperature and humidity
Displays the outdoor temperature and humidity
Measures the air pressure and displays recent readings
Weather forecast with symbols
Indoor comfort indicator
Large colour display
Automatically sets the time via DCF radio signal
Date and day of the week (choose from seven languages)
2 alarm times and snooze function
Moon phase, sunrise and sunset, tide
Backlight
Supports up to 2 additional thermo-hygro sensors (not included)
Power supply: Mains adapter (included), 3x AAA backup batteries (not included)
EXTERNAL SENSOR FEATURES
Wireless thermo-hygro sensor
Measures the temperature and humidity
Built-in display for viewing measurements
Range: up to 80 metres
Battery operated: 2x AAA batteries (not included)
Can be placed on a table or wall-mounted
SCOPE OF DELIVERY1x Base station with mains adapter
1x Wireless thermometer/hygrometer sensor
Instruction manual
BRESSER 3-in-1 Professional Wind Gauge / Anemometer
£74.99*
The wind gauge from BRESSER is a professional anemometer for your home garden. You can read the current wind speed from the base station as well as average and maximum values per hour, day, month or year can also be displayed. A wind speed alarm can also be set.
The 3-in-1 outdoor sensor determines not only wind speed but also outdoor temperature and humidity. The determined values are transmitted to the base station by radio over a maximum range of 150 m.
The base station also has integrated sensors for measuring room temperature and humidity.
BASE STATION
Displays time (12h/24h), date and day of week
Automatic time setting via DCF radio signal
Wake-up function
Graphical weather forecast for 24 h
Integrated sensors for measuring humidity (%) and temperature (C°/F°)
Displays felt temperature, wind chill, dew point and heat index
Frost warning
Wind speed alarm
History data memory
Backlight (orange)
Adjustable display contrast
Detachable stand and suspension device
Battery powered: 2x AA batteries (not included!)
WIND GAUGE
Wind sensor for measuring wind speed (mph, m/s, km/h, knots)
Integrated sensors for measuring humidity (%) and temperature (C°/F°)
Transmission of measurement data to base station via radio (frequency: 868 MHz)
Transmission range: up to 150 m
Battery powered: 3x AA batteries (not included!)
SCOPE OF DELIVERY
Base station
Removable stand
Wind gauge
Mounting material
Instruction manual
BRESSER Wi-Fi TB 7-in-1 RC Weather Station
£145.34*
Come rain or shine, the BRESSER WIFI TB 7-in-1 RC Weather Station keeps you fully informed about the weather. The 7-in-1 outdoor sensor accurately measures temperature, humidity, wind direction and speed, precipitation, UV level, and light intensity, displaying the data on a well-arranged screen. However, thanks to the “WiFi connection”, you can also share your data on online platforms. Additionally, the graphical weather forecast and different alert settings ensure you're always ready for any weather.
Accurate weather forecast at a glance
Get a quick overview with the graphical weather forecast feature of the WiFi weather station. That’s how you’ll always know what to expect in the next few hours right outside your door. The additional weather warning functions alert you to high winds, heavy rainfall, and significant pressure drop.
Stay climatically up-to-date with the WiFI weather stationThe convenient WiFi feature lets you keep track of your local weather anytime and anywhere. Publish your data on platforms like WeatherUnderground and Weathercloud and access it from any location – perfect for keeping up with local weather while traveling! The WSLink App makes configuration and updates a breeze.
Optimize your indoor climate with this BRESSER weather stationIndoor temperature and humidity significantly affect comfort. This wireless weather station helps monitor your home or office environment. Quickly determine whether ventilation is needed based on the precise indoor temperature and humidity readings, including trends and a max/min value memory. The high/low value alert function let’s you know when preset thresholds are reached.
Transform your weather station into a versatile toolEnhance your WiFi weather station by adding up to 3 optional sensors (not included). Use a thermo-hygrometer for additional room measurements, or simplify your gardening and outdoor activities with an optional soil or pool thermometer (not included). Find compatible devices in the BRESSER accessories range!
Get the BRESSER WIFI TB 7-in-1 RC Weather Station now for comprehensive insights into weather and indoor climate conditions!
FEATURES BASE STATION
Weather Station with 7-in-1 outdoor sensor for comprehensive weather data
WiFi for accessing and sharing local weather data on weather platforms
(WeatherUnderground, Weathercloud, and one more platform)
Displays detailed readings from the 7-in-1 outdoor sensor
(Outdoor temperature, humidity, wind speed, wind direction, precipitation, UV level, light intensity)
Indoor temperature (°C/°F) and humidity with trend
Weather forecast
Air pressure with history and trend
Max/min value recording
Temperature and humidity high/low alerts
Weather warnings for wind, precipitation, and pressure changes
Displays time, date, weekday, and moon phase
Built-in alarm clock with snooze feature
Easy set-up and updates via WSLink app
Compatible with up to 3 additional thermo-hygro, soil, and pool sensors (not included, available separately in BRESSER accessories)
Powered by a mains adapter (included) and 1x CR2032 backup battery (not included)
FEATURES 7-IN-1 OUTDOOR SENSOR
Measures temperature, humidity, wind speed, wind direction, precipitation, UV level, and light intensity
Durable, waterproof design
Effective range up to 150 m
Requires 3x AA batteries (not included)
SCOPE OF DELIVERY
Base station with power adapter
7-in-1 wireless sensor
Instruction manual
BRESSER Professional Rain Gauge
£74.99*
For all ambitious amateur gardeners and meteorologists who are not satisfied with average values of the weather services, the digital wireless rain gauge from BRESSER offers the possibility of your own professional precipitation measurements.
The BRESSER Professional rain gauge shows the detailed rain measurement values in millimetres, but also the indoor and outdoor temperature is displayed precisely. The rain gauge has a radio distance of 150m outdoors. The radio range is achieved by the 868 Megahertz radio signal. The base station can determine temperature and humidity and can also show the rain readings hourly, daily, weekly, monthly or annualy. It is equipped with a graphical histogram.
FEATURES
Precipitation measurement
DCF radio clock reception and display
Wake-up call with snooze function (Snooze)
Outdoor temperature alarm (frost warning)
Outdoor temperature (in °C or °F)
Indoor temperature (in °C or °F)
Humidity inside
Bar chart
SINCE-function for displaying the total precipitation from a certain point in time
Lowest and highest value display
Max-/Min-values storage
Backlight
Battery operated (Station: 2x AA; Sensor: 4x AA - not included!)
SCOPE OF DELIVERY
Rain gauge
Base station
Detachable stand
Installation material
Operation manual
BRESSER 9-in-1 MeteoChamp HD WiFi Weather Station
£399.00*
Perfect for passionate weather enthusiasts: The BRESSER 9-in-1 MeteoChamp HD WiFi Weather Station offers everything a hobby meteorologist's heart desires with various display modes, a sophisticated multi-sensor with 9 different sensors, and comprehensive data storage with export options. Additionally, the extensive weather forecast, the heat stress index, and the air quality data make it easy to plan your outdoor activities while keeping health in mind. And thanks to the Wi-Fi connection, you always have your own measurements on the go on your mobile device.
Weather station perfectly presenting extensive measurement data
How strong will the wind blow in my face shortly? With the wireless weather station, you can answer this and other meteorological questions in no time. The partially solar-powered multi-sensor measures all relevant weather parameters from temperature to air pressure with precision. Trend graphs, data log, channel overview or max/min value display – enjoy numerous possibilities to evaluate the data at a glance on the screen. A CSV export to your PC can also be done in no time.
Detailed weather forecast for long-term planning
Do you want to know if your weekend trip will be ruined by rain? With the MeteoChamp, you will have a comprehensive weather forecast on your screen in no time. Find out what to expect hourly for the next 24 hours or daily for the next 14 days in terms of climate. The temperature and precipitation probability forecast helps you with your planning.
Carefree summer fun – with the heat stress index
When the weather is nice, many head outdoors. But when the sun is too strong, we need to take care of our health during strenuous activities. This is where the heat stress index comes into play, calculated by the weather station. It is based on the Wet Bulb Globe Temperature, which considers the key heat factors in the environment. The four warning levels help you stay safe and healthy on hot days.
Breathe easy – with the air quality display
How clean is the air you breathe? The local AQI (Air Quality Index) shows you directly whether the air in your surroundings is clean. Also, current data on pollutant exposure from PM2.5, PM10, NO2, SO2, O3, and CO from the internet are available at the press of a button. For data measured directly on-site, you can expand your weather station with optional air quality sensors (not included), in addition to optional thermo-hygro sensors (not included) or water detectors (not included).
Keep an eye on the climate with the help of a versatile weather expert: the BRESSER 9-in-1 MeteoChamp HD WiFi Weather Station.
FEATURES BASE STATION
Weather station with HD display for various display modes
Display of the exact measurement data from the 9-in-1 outdoor sensor
(outdoor temperature, outdoor humidity, wind speed, wind direction, precipitation amount, UV level, light intensity, WBGT, air pressure)
Heat stress index based on WBGT
Weather forecast (14 days / 24 hours)
including temperature and precipitation probability
WiFi connection for sharing and retrieving local data on platforms like ProWeatherLive (3 years membership included), WeatherUnderground, and Weathercloud
Indoor temperature (°C/°F) and humidity
Display of internet data on local AQI value (Air Quality Index) and the 6 most important pollutants (PM2.5, PM10, NO2, SO2, O3, CO)
Multi-channel overviews of live data from all wireless sensors
Felt outdoor temperature and dew point
Max/min value memory with timestamp
Trend graphs over 72 hours for all sensors
Data storage with export function
High/low value alarm for various measurements
Weather data calibration
Alarm clock with frost warning
Time and date (internet time synchronisation)
Moon phase, sunrise/sunset, moonrise/moonset
Expandable with the following optional sensors:
Up to 7x thermo-hygro, ground, and/or pool sensors (not included)
Up to 7x water detectors (not included)
1x PM2.5/10 sensor (not included)
1x CO2 sensor (not included)
1x CO sensor (not included)
1x HCHO and VOC sensor (not included)
1x lightning sensor (not included)
Various backgrounds adjustable
Power supply: Power plug (included), CR2032 back-up battery (not included)
FEATURES MULTISENSOR
Measures temperature, humidity, wind speed, wind direction, precipitation amount, UV level, light intensity, air pressure, WBGT
Operates via a large movable solar panel
If there is insufficient sunlight, operates on 3x AA batteries (not included)
Waterproof housing
High range up to 150 m
SCOPE OF DELIVERY
Base station including power plug
9-in-1 outdoor sensor
Manual