Compared with previous models, the new SXP2 mount features larger bearings in order to increase the accuracy and load capacity. The mounting housing is made from a stronger material than the previous SX mounts. The equatorial head is clamped into a fork in order to increase the stability of the polar alignment wedge.
Precise tracking with P-PEC function
The SXP2 mount comes with the modern STARBOOK TEN control system. This includes a P-PEC function for precise tracking. PEC stands for “Periodic Error Corrections” and corrects errors in the mechanics which lead to periodic errors in the gear systems. The P-PEC function, which is based on the PEC function, is designed for the SXP2 equatorial mount. The P-PEC function saves the records of corrections, even after the power supply to the mount has been switched off. It is not necessary to re-enter the data each time, which enables a quicker setup and more precise tracking.
The belt drive system minimizes backlash and noise
Conventional motor-driven systems on equatorial mounts use gear wheels, which are driven by the motor. However, this design generates backlash under the gear wheels, which can lead to inaccuracies. To avoid these errors, the drive was converted to a belt drive system. This drastically reduces the backlash of the gear unit, as well as the noise generated by the drive system. It also ensures a quicker reaction when corrections are required.
16 bearings
The mechanical parts contain a total of 16 bearings. The SXP2 mount uses a set of tapered roller bearings for the RA axis in order to provide additional stability for more precise tracking.
Stable polar alignment wedge
The SXP2 mount uses the same fork as the heavy AXJ mount. This new construction enables a quick and stable configuration of the latitude setting.
Simple and precise polar alignment via reference star
The 6x20 polar finder scope is pre-installed. This allows the user to configure the polar alignment (for both the northern and southern hemispheres). The polar finder scope has a variable illuminated reticle with an automatic power-off function. The brightness can be adjusted in 8 levels so that the user can configure the desired brightness. The polar finder scope can be configured directly via three reference stars and can reach an accuracy of up to 3 arc minutes.
Variable mount head
The mount head has a diameter of 35 mm and features 8 threaded holes for M8 screws spaced at 45 degrees. An optional accessory tray can be attached to the mount head directly or in combination with an optional mounting wedge for dovetail plates. The threaded holes on the mounting head can also be used to mount rails from other manufacturers.
Modern STAR BOOK TEN controller with high-resolution colour display and built-in star chart
The STAR BOOK TEN controller is a modern control system with a high-resolution colour monitor. The STAR BOOK TEN system contains more than 272,000 celestial objects, including 260,000 stars from the SAO catalogue, 109 Messier objects, 7840 NGC objects and 5380 IC objects, as well the soon, moon and planets. Objects can be accessed by name, and information such as images and data can be defined separately.
A combination of innovative, elegant design and user-friendly features
The improved design of the stable and rigid mount body, which features precise tracking with a P-PEC function and the STAR BOOK TEN controller, offers a highly precise, easy to use mount that is guaranteed to please astrophotographers and observers.
Special motor mount for lighter counterweight
The heavy RA and DEC motor units are built into the bottom of the declination axis to ensure that the centre of gravity of the equatorial head is below the RA and DEC axis. This enables the declination body to function as a counterweight. Thanks to the flat mounting head, the mount can be balanced with a significantly lighter counterweight.
Retractable counterweight bar
The counterweight bar is made from solid stainless steel with a thickness of 20 mm, and enables the use of all counterweights from the SX and GP mount series. The counterweight bar is housed in the declination body.
Accessory shoe
The #35511 polar meter can be placed onto the accessory shoe for quick and easy polar alignment.
FEATURES
RA Sprocket: 73.2 mm Ø brass wheel with 180 teeth
DEC sprocket: 73.2 mm Ø brass wheel with 180 teeth
Worm shaft: 9 mm Ø brass shaft
RA and DEC axis: 40 mm Ø carbon steel bearing, 16 bearings
Counterweight bar: 20 mm Ø RA
Setting circles: 0.1 minute steps (with StarBook TEN)
Polar finder scope: PF-L Polar Scope 6x20mm
Stepper motors: 250 PPS speed maximum 1000x sidereal rate
Maximum load: 17 kg photographic without counterweight
Power connection: DC 12 V, 0.45-2.2 A
Dimensions: 386mm x 419mm x 128 mm
Weight of equatorial head: 13.3 kg without counterweight
Counterweight: 3.7 kg
SCOPE OF DELIVERY
3.7 kg and 1,9 kg counterweight
SXP2 mount
STARBOOK TEN controllerCablePower cord for Cicgar socket2032 batteryassembly tool
Designed as a complement to the AXD2 equatorial mount, the AXJ mount offers outstanding durability and precision.
The AXJ mount can also be used on AXD-TR102 tripods with an adapter.
Periodic errors on mounts are usually measured and corrected by the user. Unlike the old StarBook controller, the STAR BOOK TEN controller saves these errors permanently. The periodic error of the mount is measured in the factory (total of 12 points per 30 degrees worm gear) and corrected before delivery. This is known as V-PEC and functions automatically as soon as you use the mount. It delivers an accuracy of +/- 4.0 arc seconds. You can increase the tracking accuracy further by saving your own recorded periodic errors.
Vixen uses a new Belt-drive system in the AXJ mount. The gear drive was replaced with a toothed belt drive.
This gives the mount a quicker reaction time and lower backlash. It also helps to minimize noise. The 6x20 polar finder scope is pre-installed.
This allows the user to configure the polar alignment (for both the northern and southern hemispheres).
The polar finder scope has a variable illuminated reticle with an automatic power-off function. The brightness can be adjusted in 8 levels so that the user can configure the desired brightness.
SETTING ACCURACY OF LESS THAN 3 ARC MINUTES
The dark field illumination (red LED) turns on when the push button is pressed. The reticle also lights up in red so that the observer can recognize and align stars in the background of the reticle. The light turns off automatically after a few minutes to save battery power.
2 bearing sets (4 pieces) are used for the shaft of the RA axis. Thanks to the newly developed EQ design, the ZXJ mount has a higher load capacity of 22 kg.
As the motors, worm shaft and worm gear are located in the lower part of the mount, fewer counterweights are required than with conventional mounts.
The STAR BOOK TEN controller is a modern control system with a high-resolution colour monitor.
The STAR BOOK TEN system contains more than 272,000 celestial objects, including 260,000 stars from the SAO catalogue, 109 Messier objects, 7840 NGC objects and 5380 IC objects, as well the soon, moon and planets. Objects can be accessed by name, and information such as images and data can be defined separately.
FEATURES
+/-4.0 arc seconds with V-PEC
V-PEC (Vixen-Permanent Periodic Error Correction)
Belt drive system (prevents backlash and minimizes noise)
14 ball bearings
Polar alignment (variable fork fix type)
Polar finder with reference star alignment
STAR BOOK TEN controller with autoguider input
Retractable counterweight bar
WHAT’S INCLUDED
AXJ mount
Starbook Ten controller
2 counterweights (3.7 kg and 1.5 kg)
GoTo mount with Star Book Ten controller
22 kg load (photographic)
The Vixen DX adapter plate is equipped with a Vixen standard dovetail bar on the underside, allowing it to be attached to all mounts with the Vixen standard connection. This enables you to attach two telescopes or additional guide scope rings.FEATURES
Can be used with SX, SXD, GP2 and GPD2
With M6 and M8 drill holes for use on third-party mountsFunction: Mounting multiple tubes or precise adjustment of guide mounts in X and Y direction
Dimensions: 330 x 120 x 12 mm
Weight: 1,275 gPACKAGE CONTENTSDX adapter plateScrew setMounting tool
Take pictures with your smartphone through the telescope or microskope? With the Smartphone camera adapter this is now child's play! Simply screw the adapter to the eyepiece and use your smartphone as a camera with a super-telephoto / super-macrophoto lens. It lets you take pictures of distant objects or very small objects as if you were very close.The Deluxe version offers an even more comfortable and secure attachment to the eyepiece. By a rotary movement of the clamping ring 3 clamping jaws are evenly applied to the eyepiece housing and the Smartphone adapter sits firmly and centrically on the eyepiece. The fine adjustment of the height of the smartphone support allows a quick and precise adjustment of the viewing height of the smartphone camera above the eyepiece lens. Good image results are thus guaranteed. FEATURES Take photos through the telescope Smartphone camera with super telephoto lens Fine Height adjustment of phone support Wide adjustment range for eyepiece housing diameter Fits 31.7mm (1.25") eyepieces For eyepiece housing diameters from 22-38mm SCOPE OF DELIVERY Smartphone holder deluxeLocking ring for the smartphone
This dovetail rail is suitable for mounting on BRESSER MESSIER 6 , 8 and 10 inch Dobson telescopes. The dovetail rail is manufactured according to the GP standard and therefore these Dobson telescope tubes can be used on any telescope mounting with the appropriate carrying capacity. The prism rail is 200mm long and therefore offers sufficient clearance for secure mounting on the telescope mount. In combination with the optionally available carrying handle Art. No. 4940150, these Dobson telescope tubes can also be easily transported because the carrying handle is mounted in the centre of gravity of the telescope. This dovetail rail is also suitable as spare part for all other MESSIER telescopes with 200mm dovetail rail.
FEATURESdovetail rail (GP) for 6, 8 and 10 inch MESSIER Dobson telescopeswhen using these telescope tubes on EQ mountsthe assembly is carried out on the original tube ringsalso suitable as spare part for MESSIER telescopes with 200mm prism railassembly material and tools includedlength: 200mm; width: 45 mm; height: 16 mmbore spacing: 160 mm; Bore diameter: 6.5 mm
SCOPE OF DELIVERYdovetail rail (GP)mounting screws (2 pieces; 1/4 inch)hex wrench tool (3/16 inch)
Take pictures with your smartphone through the telescope! With the Smartphone camera adapter this is now child's play! Simply screw the adapter to the eyepiece and use your smartphone as a camera with a super-telephoto lens. It lets you take pictures of distant objects as if you were very close. FEATURES Take photos through the telescope Smartphone camera with super telephoto lens Fits 31.7mm (1.25") eyepieces For eyepiece housing diameters from 32-34mm SCOPE OF DELIVERY Smartphone holder Locking ring for the smartphone
Are you having trouble focusing your eyepiece or camera? Then use this 37.5 mm extension sleeve to increase the distance between the 2.5 inch HEXAFOC eyepiece extension and the eyepiece or camera. The extension sleeve has an M68x0.75 mm internal and external thread and can therefore be screwed directly onto the HEXAFOC draw tube. SPECIFICATIONSIncreases the distance to the eyepiece/cameraSuitable for 2.5 inch HEXAFOCOptical length: 37,5 mmInternal and external thread: M68x0,75 mmInside black matt coatedMaterial: aluminium, black anodizedSCOPE OF DELIVERYExtension sleeve 37,5 mm (1 piece)
Sturdy metal tripod adapter for binoculars up to 3kg net weight. High-quality connecting element between tripod head and binocular bridge with a very stiff design.FEATURESTripod adapter Deluxe made of metalSuitable for almost all binoculars up to 3kg weightConnection element between tripod head and binocular bridgeVery elegant and rigid designTripod connection thread standard 1/4 inch photo threadBinocular connection thread standard 1/4 inch photo threadRubber-coated tripod support for non-slip fitLarge rubber-coated fixing screw for binocular bridgeOverall length: 100mm, weight: 100g, colour: blackSCOPE OF DELIVERYTripod Adapter Deluxe (1pc)
Adapter 2" with brass locking ring for 1,25" eyepieces. The integrated T2 thread adapts DSLR or astro-cameras (*appropriate T2 ring for your camera model needed). On the telescope side there is a 2" filter thread M48x0.75, which allows the easy use of colour and nebula filters.SCOPE OF DELIVERYCamera Adapter
This adapter replaces the M42x0.75 Adapter for CCD Camera that comes standard with the EXPLORE SCIENTIFIC 3-inch Field Flattener/0.7x Focal Reducer. Allows the connection of a camera via M48x0.75 thread. The larger free inner diameter than T2/M42 effectively prevents vignetting when using a full format camera. The illumination of the camera sensor is therefore optimised.FEATURESAllows the connection of a camera via M48x0.75 threadLarger free inner diameter than T2/M42No vignetting by using cameras with full frame sensor Fits to EXPLORE SCIENTIFIC 3" Flattener 0.7 x ReducerMade of black anodized aluminumSCOPE OF DELIVERYAdapter with M48x0,75 thread
Take photos with your smartphone through your spotting scope, microscope or telescope. It’s a child's play with the BRESSER Universal Smartphone Adapter. Simply attach the adapter to the eyepiece holder of your optical device and then use all together as a telephoto lens for your smartphone camera. Now you can shoot distant objects as if they were up close or take photos through a microscope.FEATURESuniversal adapter to assemble the smartphone to a spotting scope or telescopefor eyepieces up to 68 mm diameterfor smartphones with a width of 50-88mmSCOPE OF DELIVERYSmartphone adapterManual
This adaptor enables you to connect the 0510360 0.7x focal reducer/field flattner to telescopes that feature the 2.5" Hexafoc. The big inner diameter of the 2.5" Hexafoc is fully utilised with this adaptor to avoid vignetting.What's Included1x Hexafoc 2.5 adaptor for 3" 0.7x Corrector ring
The Vixen DC ring reduces a 60-mm thread to a 53-mm threadFEATURES64-mm DC ring (reducing ring)Reduces 60-mm threads to 53-mm threads for ED seriesDimensions: 4 mm thick (without thread)Weight: 22 gPACKAGE CONTENTSVixen DC 60–53-mm reducing ring
Eyepiece adapter 50.8 mm to 43 mmFEATURES
Adapts a 50.8-mm thread to a 43-mm female thread
Compatibility: For mounting the 73523 camera adapter 43 mm deluxe
Weight: 85 gPACKAGE CONTENTSVixen reducing sleeve 50.8–43 mm
£24.00*
Functional cookies are absolutely necessary for the functionality of the web shop. These cookies assign a unique random ID to your browser so that your unhindered shopping experience can be guaranteed over several page views.
Google Pay payments
PayPal payments
Cookie settings:
The cookie is used to store the cookie settings of the site user over several browser sessions.
Information on origin:
The cookie stores the referrer and the first page visited by the user for further use.
Payment provider (Stripe) session
Timezone:
The cookie is used to provide the system with the user's current time zone.
CAPTCHA integration
Payment provider (Stripe) session
Stripe:
The cookie is used by the payment provider to increase security when processing payments on the website.
Cache handling:
The cookie is used to differentiate the cache for different scenarios and page users.
Session:
The session cookie stores your shopping data over several page views and is therefore essential for your personal shopping experience.
Payment provider (Stripe) fraud prevention
Payment provider (Stripe) fraud prevention
CSRF token:
The CSRF token cookie contributes to your security. It strengthens the security of forms against unwanted hacker attacks.
Google Tag Manager debug mode:
Allows to run the Google Tag Manager in debug mode.
Activated cookies:
Saves which cookies have already been accepted by the user for the first time.
Allows Google to collect personal data for online advertising and marketing.
Google Advertising
YouTube video
Location maps:
We use OpenStreetMap as tile provider to show you visually the location of our stores and merchants.
Recently viewed products:
The cookie stores the most recently viewed products in order to suggest them on further product pages.
Wishlist
Customers also viewed:
The cookie stores the most recently viewed products in order to suggest them to other customers on product pages.
Cookies used for statistics and shop performance metrics.
Conversion and usertracking via Google Tag Manager
Google Tag Manager:
Cookie from Google to control the advanced script and event handling.
Google Analytics:
Cookie from Google for website analysis. Generates statistical data about how the visitor uses the website.
Tracking cookies help the shop operator to collect and evaluate information about the behaviour of users on their website.
Matomo Tracking:
Tracking statistics for the optimization of user workflows. No personal data is stored.
Matomo:
The cookie is used to track website activity. The information collected is used for site analysis and to generate statistics.
Google Analytics:
Google Analytics is used for traffic analysis of the website. Thereby statistics about website activities can be created and read out.
Marketing cookies are used to display advertisements on the website in a targeted and individualized manner across multiple page views and browser sessions.
Google AdSense:
The cookie is used by Google AdSense to promote advertising efficiency on the website.
Google conversion tracking:
The Google Conversion Tracking Cookie is used to track conversions on the website effectively. This information is used by the site operator to target Google AdWords campaigns.
Marketing cookies are used by third-party vendors or publishers to display personalized advertisements. They do this by tracking visitors across websites.
Google Ads:
Advertising Targeting
We respect your privacy
This website uses cookies to ensure you get the best experience on our website... More information.