LUNT LS80MT/B1200R&P Multipurpose APO Telescope for Sun + Night-Sky
Product Highlights
Modular 80mm ED Apo telescope for observing & photographing prominences & more at the sun during the day and moon, planets & deep-sky at night
- Special telescope for observing the Sun in H-alpha
- Also for night sky observing, modular design
- 2-lens ED refractor FPL-53, 80mm aperture, 560mm focal length
- Observation & photography with very good image quality
- Bandwidth less than 0.7 Angstrom
- Small B1200 blocking filter in zenith mirror
- Solid R&P focuser with 10:1 reduction
- Also for Ca-K & White-Light solar observing
- Absolutely safe, no danger to the eyes
Product number:
0551324
GTIN/EAN:
4007922069685
Product information "LUNT LS80MT/B1200R&P Multipurpose APO Telescope for Sun + Night-Sky"
Modular designed multipurpose telescope, both for observing the sun in the H-alpha wavelength, as well as for night sky observations. Easy conversion between the different applications with a few simple steps. 2-lens ED Apo telescope with FPL-53 glass, 80mm aperture and 560mm focal length - very good image quality for H-Alpha solar observation and also for observing the starry sky at night.
With innovative air pressure tuning system, good 2 inch (50.8mm) R&P focuser, and B1200 blocking filter.
Solar observing in H-alpha:
The LS80MT/B1200 is a complete telescope for observing the sun in H-alpha light, with 80mm free aperture (no central obstruction) and 560mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An internal Etalon filter achieves a bandwidth of <0.7 Angstrom with the innovative air pressure tuning system Pressure-Tuner. Tuning is done by slightly changing the air pressure in a pressure chamber inside the telescope. This changes the refractive index of the air, making it easy to tune to the H-alpha line. The pressure tuner guarantees a homogeneous image, without central obstruction, and a permanently protected Etalon without erosion. A set of collimating lenses installed in the telescope ensures best performance.
Fine adjustment is achieved with a solid 2 inch R&P focuser with 10:1 reduction.
Blocking-filter is the B1200. The B1200 is good for visual solar observing. Also solar imaging is possible by cameras with small sensor chip. We recommend a LS80MT with B1800 blocking-filter by using cameras with large sized sensor chips.
The star diagonal in which the blocking filter is installed, is equipped as standard for 1.25 inch eyepieces and with a T2 camera connection.
Observing the starry night sky:
The H-Alpha Etalon system can be removed from the telescope in a few easy steps thanks to its modular design. With the additionally available conversion kit (item number 0551330) the 2-lens ED Apo refractor can then be used as a normal telescope with 80mm aperture and 560mm focal length for observation and photography of the night sky. The FPL-53 doublet lens offers an low colour aberration image. Common 2 inch star diagonals can be used at the high quality R&P focuser of the conversion kit 0551330.
Please note that the optionally available conversion kit 0551330 is absolutely necessary if the telescope should be used at night.
More applications:
With additionally available accessories the LS80MT offers even more possibilities!
- Double-Stack
The LS80MT telescope can optionally be upgraded with the additionally available double-stack module DSII/SFPT (item number 0551395). The DSII system is a internal double-stack module. Thereby a bandwidth of <0.5 Angstrom is achieved for H-alpha solar observation. Therefore much more details on the solar surface will become visible.
- Solar observing in White-Light
If the H-alpha unit has been removed, of course either a sun filter to be installed in front of the objective, or a Herschel-wedge at the focuser can be used to observe the sunspots in White-Light.
- Solar observing in Ca-K wavelength
Certainly, the Ca-K filter modules from Lunt Solar Systems can also be used at the LS80MT to observe and photograph super-granulation and other effects visible in this wavelength on the sun.
This makes the LS80MT a completely universal usable ED Apo telescope of very good quality!
FEATURES
With innovative air pressure tuning system, good 2 inch (50.8mm) R&P focuser, and B1200 blocking filter.
Solar observing in H-alpha:
The LS80MT/B1200 is a complete telescope for observing the sun in H-alpha light, with 80mm free aperture (no central obstruction) and 560mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An internal Etalon filter achieves a bandwidth of <0.7 Angstrom with the innovative air pressure tuning system Pressure-Tuner. Tuning is done by slightly changing the air pressure in a pressure chamber inside the telescope. This changes the refractive index of the air, making it easy to tune to the H-alpha line. The pressure tuner guarantees a homogeneous image, without central obstruction, and a permanently protected Etalon without erosion. A set of collimating lenses installed in the telescope ensures best performance.
Fine adjustment is achieved with a solid 2 inch R&P focuser with 10:1 reduction.
Blocking-filter is the B1200. The B1200 is good for visual solar observing. Also solar imaging is possible by cameras with small sensor chip. We recommend a LS80MT with B1800 blocking-filter by using cameras with large sized sensor chips.
The star diagonal in which the blocking filter is installed, is equipped as standard for 1.25 inch eyepieces and with a T2 camera connection.
Observing the starry night sky:
The H-Alpha Etalon system can be removed from the telescope in a few easy steps thanks to its modular design. With the additionally available conversion kit (item number 0551330) the 2-lens ED Apo refractor can then be used as a normal telescope with 80mm aperture and 560mm focal length for observation and photography of the night sky. The FPL-53 doublet lens offers an low colour aberration image. Common 2 inch star diagonals can be used at the high quality R&P focuser of the conversion kit 0551330.
Please note that the optionally available conversion kit 0551330 is absolutely necessary if the telescope should be used at night.
More applications:
With additionally available accessories the LS80MT offers even more possibilities!
- Double-Stack
The LS80MT telescope can optionally be upgraded with the additionally available double-stack module DSII/SFPT (item number 0551395). The DSII system is a internal double-stack module. Thereby a bandwidth of <0.5 Angstrom is achieved for H-alpha solar observation. Therefore much more details on the solar surface will become visible.
- Solar observing in White-Light
If the H-alpha unit has been removed, of course either a sun filter to be installed in front of the objective, or a Herschel-wedge at the focuser can be used to observe the sunspots in White-Light.
- Solar observing in Ca-K wavelength
Certainly, the Ca-K filter modules from Lunt Solar Systems can also be used at the LS80MT to observe and photograph super-granulation and other effects visible in this wavelength on the sun.
This makes the LS80MT a completely universal usable ED Apo telescope of very good quality!
FEATURES
- 2-lens ED APO refractor, FPL-53
- Aperture: 80mm (no central obstruction)
- Focal length: 560mm
- Bandwidth: internal Etalon with <0.7 Angstrom
- Tuning: air pressure tuning system Pressure-Tuner
- Blocking filter: B1200 with 1.25" and T2 connection
- Focuser: R&P with 10:1 reduction
- Two tube-ring with handle
- Sol-Searcher installed inside handle
- Dovetail bar at GP-level for astronomical mounts
- Weight: 4.95kg
- Length with blocking filter and dew-shield: 62cm
- Length without blocking filter and removed dew-shield: 50cm
- LS80MT Multipurpose Telescope
- Pressure-Tuner
- B1200 blocking filter in star-diagonal housing
- 2 inch R&P focuser with 10:1 reduction
- Tube rings with dovetail bar and sol-searcher
- Transport case (78x33x23cm)
- Instruction manual
| Colour: | white |
|---|---|
| Field of application [Telescopes]: | Deep Sky Observation, Deep Sky Photography, Lunar observation, Lunar photography, Planetary observation, Planetary photography, Solar observation |
| Focusing system: | 2" Rack-and-Pinion Focuser with 10:1 reduction |
| Material: | Aluminium |
| Mount Type [Telescopes]: | Optics without Mount |
| Optical design: | Apochomatic Refractor |
| Telescope filter type: | Solar Filter H-Alpha |
Login
Accessories
LUNT LS80MTBP&F Conversion Kit for LS80MT
£397.00*
The LS80MT solar telescopes can be upgraded with this optional conversion kit. This allows the telescopes to be used as 2-lens ED apochromatic refractor for observation and photography of the starry night sky.The H-Alpha system of the LS80MT telescopes can be easily replaced by this conversion kit. The conversion kit offers a high quality and solid R&P focuser. Even the heaviest cameras or other accessories will be hold without any problems and can be focused sensitively by the integrated 10:1 reduction.Simply loosen three knurled screws holding the H-Alpha unit including the focuser at the LS80MT. Attach here the new focuser, and your LS80MT is transformed into a 2-lens apochromatic telescope. The new focuser offers 85mm focusing way with backlash- and tilt-free mechanics also when using heavy accessories. A 2 inch clamp is directly at the focuser, and an adapter to 1.25 inch is included in delivery.But this is not all: With this conversion kit Herschel-wedges or Ca-K modules can be used at the LS80MT telescopes for solar observation. This makes it possible to observe the sun in H-alpha, in Calcium-K wavelength light, or in White-Light - with one and the same telescope!This conversion kit turns the LS80MT into a real all-round telescope!FEATURESBacklash- and tilt-free mechanics85mm focusing way10:1 reduction2 inch and 1.25 inch connectionSCOPE OF DELIVERYHigh quality 2 inch focuser with adapter to LS80MT telescopesAdapter from 2 inch to 1.25 inchInstruction manualLS80MT telescope not included! Can only be used together with a LS80MT solar telescope. This conversion kit is absolutely necessary if a LS80MT telescope should be used for night sky observation.
LUNT DSII/SFPT double-stack module for LS80MT & LS100MT
£2,991.00*
Double-stack module for more contrast and details on the solar surface with the LS80MT and LS100MT telescopes.At the LS80MT and LS100MT telescopes double-stacking is possible with this internal DSII double-stack module when observing the sun in H-Alpha. The DSII modules reduce the bandwidth to <0.5 Angstrom. They are designed to show the surface details of the sun better, the contrast is significantly increased and therefore filaments and active regions are better visible.The DSII/SFPT module is designed exclusively for use in LS80MT and LS100MT telescopes, it cannot be used at other telescopes. It is used between the existing H-Alpha unit and the focuser on the telescope. Installation is simple, no additional adapters or tools are required.FEATURESBandwidth: <0.5 AngstromTuning: Air Pressure Tuning System SCOPE OF DELIVERYDSII module with internal Etalon for LS80MT and LS100MT telescopesPressure Tuner System(LS80MT or LS100MT telescope not included!)
LUNT LS7-21ZE Zoom Eyepiece 7.2mm - 21.5mm
£280.00*
Lunt Solar Systems zoom-eyepiece with variable focal length from 7.2mm to 21.5mm, with 1.25 inch (31.7mm) connection.The special of this zoom eyepiece is that the optical layout offers highest quality views of the sun, but also on nightsky objects. LUNT minimized the reflections by using superb multicoatings and with care designed internal baffle system and blackened lens edges. The LUNT zoom-eyepiece is not the widest field zoom-eyepiece on the market, LUNT prefered best performance over widest field. The sun and stars are perfect pin point across the entire field of view without any visible distortion. The LUNT zoom-eyepiece is almost parfocal, from one end to the other end of the zooming way you need only 0.5mm to refocuse. The LUNT zoom-eyepiece has a very nice height adjustable eyeguard to protect your eye against day light reflections and to help you to find the perfect eye position.Please note that these eyepieces are only accessories for existing solar telescopes or filters when observing the sun. Solar observation alone with these eyepieces without additional solar filters is not possible!FEATURESFocal length: 7.2mm - 21.5mm continuously adjustableBarrel size: 1.25 inch (31,7mm)Diameter: 47mmHeight: 82mmWeight: 170gEye relief: 15mmLenses / Groups: 7 lenses / 4 GroupsField of view: 53° at 7.2mm - 40° at 21.5mmSCOPE OF DELIVERYLUNT Zoom Eyepiece 7.2mm - 21.5mm
LUNT Heating Module for Blocking-Filter
£373.00*
At very cold temperatures, blocking filters may no longer work accurately central in the H-alpha wavelength, which means that the details on the sun become less visible. With this Heating-Module you can counteract this effect and observe the sun in the H-Alpha line optimally even at cold temperatures.The Heating-Module is for use with blocking filters in 90° star-diagonal housing from Lunt Solar Systems. It cannot be used at blocking filters in straight extension tube.The Heating-Module has an internal battery which allows for about 1 to 1.5 hours of operation. The battery can be recharged with the supplied USB cable.FEATURESAllows optimal observations in the H-alpha line even at very cold temperatures with blocking filters from Lunt Solar SystemsOperating time about 1 to 1.5 hoursInternal battery can be charged via USB cableCan also be used as a portable charger to power small electronic devicesInput (IN): 5V 2AOutput (OUT): 5V 2ACapacity: 5000mAhSCOPE OF DELIVERYLSBHEATER Heating-Module for Blocking-FiltersMounting screwsHexagon wrenchUSB cableInstruction manual(Blocking-filter not included!)
Adapter T2 to 2", for 2" eyepieces to blocking filter
£27.00*
Adapter T2 to 2", takes for example 2" eyepieces to Lunt Solar Systems blocking-filters.This adapter offers a T2 female thread at the telescope-side, and a 2" connection at the eyepiece-side.For example you want to use your 2" eyepieces at Lunt Solar Systems telescopes or filters? All you need is this adapter. Simply remove the 1.25" eyepiece tube from your blocking-filter, and thread on this 2" adapter. It takes T2 threading to a 2" eyepiece tube.You can use 2" eyepieces with this adapter at:• LUNT H-alpha telescopes (not at LS35THa!)• the blocking-filters of LUNT H-alpha filter systems• LUNT Ca-K modules• all telescopes/adapter with T2 male threadTechnical data:• Thread at telescope-side: T2 female thread• Eyepiece connection: 2"Delivered by order:• Adapter T2 to 2"(Blocking Filter not included)
LUNT HAT solar hat with neck flap
£55.00*
Keep your head covered and prevent sunburn while observing. UV protectant material with small pocket and clip to prevent being blown off in the wind. Cool ventilated design. Neck flap to keep your neck protected while looking through the eyepiece.SCOPE OF DELIVERYSolar Hat with neck flap
BRESSER Twilight I telescope mount with tripod
£280.00*
The Twilight I is a light-to-medium-duty alt-azimuth mount with tripod designed to quickly and easily accept small to medium sized refractors, such as the AR102 + AR127s or ED102mm + ED127, and of course, the ED80mm. Lightweight, fast Newtonians will also match up nicely with the BRESSER Twilight I mount. As long as your telescope does not exceed 18 pounds and has a Vixen-Style Universal Dovetail bar for mounting the telescope to the mount head, you are good to go. The Twilight I alt-azimuth mount head is made of powder-coated aluminum and there are worm gears on both axes. The adjustable angle head can be tilted forward or back at a 45° angle to allow more clearance for your telescope so you can point it straight up for viewing at the zenith. The Allen hex wrench for doing the mount head adjustment can be safely stored at the integrated magnetic holder. Slow-motion control cables are attached on the vertical and horizontal axes, and are easy to turn during the night, even with gloves on, due to the over-sized knurled knobs that are attached to the end of each cable. They can be attached to either side of each axis to accommodate right or left-handed users, or different types of telescopes (e.g. refractors vs. Newtonian reflectors) for ease of adjustment. The stainless steel tripod that comes standard with the Twilight I mount has adjustable legs and a wide foot print of 42 inches, which makes the tripod more stable. A spreader bar locks against the inside of the legs to secure the tripod even further, and keep vibrations to a minimum. SCOPE OF DELIVERYTwilight I Telescope MountStainless Steel Field tripod
BRESSER Messier EXOS 1/EQ-4 Mount
£308.00*
Mount and Tripod. The BRESSER Messier beginners series of telescopes. Within this series you find smaller optics mounted stable on the new BRESSER EXOS 1 mount. This combination means more value for money and puts an end to flimsy beginners scopes which discourage most of the beginners due to small, under engineered mounts. The EXOS 1 with a robust stainless steel tripod bears optical tubes weighing up to 7kg stable for visual observation. The optional motor drive for the RA axis makes usage even more comfortable, so there is no need of manual tracking and the object is kept steadily in the field of view.FEATURES
Stable parallactic mount with fine drive in both axes
Circular bubble level for easy horizontal alignment
Stable height-adjustable stainless steel tripod
Retrofittable with a tracking motor for the right ascension axis
Pole height scale for setting the latitude
Scaled graduated circular rings for easier finding of objects by means of star atlas or planetarium software
Tripod weight: 4.7 kg
Mount weight: 4 kg (without counterweight)
Total weight incl. counterweight: 13.2 kg
SCOPE OF DELIVERYEXOS 1 German equatorial mountstainless steel tube field tripod1 x 4.5 kg counterweight
Vixen AP-SM Mount with RA Motor Module and Star Book One Controller
£1,215.00*
The AP-SM mount is an enhancement of the AP mount. Unlike the AP mount, it has an RA motor and is equipped with the STARBOOK ONE controller.
The AP mount provides a secure, stable support for your telescope.
Thanks to the slip clutch mechanism, the mount can be adjusted quicky to the target object.
There is a wide range of optional accessories. The ADVANCED POLARIS mount is ideal for both beginners and advanced observers who require a lightweight travel mount.
STYLISH DESIGN
The AP mount features an ultra-smooth finish without any projecting parts.
Simply place your telescope on the mount and move it to the desired celestial object without having to loosen any clamps!
QUICK POLAR ALIGNMENT
The slip clutches allow you to adjust the telescope to your target object easily – no more searching for adjustment clamps in the dark! An optional polar meter is available, which enables you to locate the celestial pole when it is hidden by trees or buildings.
OPTIONAL POLAR FINDER SCOPE
The innovative polar finder scope provides a new way to polar align your telescope. Simply align the stars in the crosshair reticle with the same stars in the night sky. Polar alignment is achieved using 3 reference stars. The polar finder is illuminated to facilitate orientation and switches off automatically after 3 minutes to save battery power.
POWER SUPPLY
The RA and DEC motor modules are powered by four AA alkaline, Ni-MH or Ni-CD batteries. The RA motor module has a USB Micro-B port for an external power supply. A USB power pack or car charging cable can be used for longer observation sessions.
STAR BOOK ONE CONTROLLER
The STAR BOOK ONE is a multifunctional and intuitive controller that tracks in the RA and DC axis with a range of different speeds. The tracking options are designed for time-lapse cameras at a wide range of speeds, including sidereal, lunar and solar rates. The controller also offers many useful functions such as backlash compensation, autoguider port, PEC and a built-in red LED light.
FEATURES
R.A. Worm wheels: 58.4 mm Ø gear wheel with 140 teeth
DEC. Worm wheels: 58.4 mm Ø gear wheel with 140 teeth
Azimuthal adjustment: Twin adjusting screws
Altitude adjustment: Twin adjusting screws
Number of ball bearings: 7
Polar finder: Optional
Motor: RA stepper motor
Tracking: STAR BOOK ONE (max. 60x Slewing)
Power supply: USB Micro-B
Counterweight bar: 20 mm
WHAT’S INCLUDED
AP-SM mount
1.0 kg counterweight
STARBOOK ONE controller
LUNT CAA-RF 0.8x reducer/field-flattener for nighttime photography with LS80MT, LS100MT & LS130MT telescopes
£560.00*
Field-flattener and focal length reducer for deep-sky astrophotography. Designed for the multipurpose APO telescopes of the Lunt-Solar-Systems LS80MT, LS100MT and LS130MT series.At the telescopes of the MT series from Lunt Solar Systems, the H-Alpha filter unit for solar observation can be removed, then these telescopes can be used as high quality ED APO's for observing and photographing the night sky.This accessory for the LS80MT, LS100MT and LS130MT telescopes shortens the focal length by a factor of 0.8x, providing a larger field of view for deep-sky astrophotography. This also allows shorter exposure times. At the same time, the field of view is flattened for photography.On the camera side, the reducer/field-flattener has a T2 male thread (M42x0.75). DSLR cameras can be connected here directly with a normal T2 ring.For other cameras, an M39x0.75 female thread is available in addition to the T2 male thread. The distance between reducer/field-flattener and camera sensor should be around 50 to 55mm. Normal T2 extension sleeves can be used to achieve this distance.On the telescope side, the following connections are provided: 2 inch socket, M54x0.75 male thread, M63x1 male thread and M68x1 male thread.FEATURESShortens focal length of F/7 ED telescopes by a factor of 0.8xFlattened field of view for photographyT2 thread for camera connectionWorking distance 50 to 55mm2 inch socket and M54x0.75 thread for connection to telescopesAdapter to M63x1 and M68x1Weight only reducer/field-flattener: 0.25kgWeight together with adapter to M63 & M68: 0.36kgSCOPE OF DELIVERY0.8x reducer/field-flattenerAdapter to M63x1 and M68x1
Similar products
LUNT Solar Eclipse Glasses (5 pieces)
£16.00*
Observe solar eclipses, sunspots, and airplane flybys in front of the sun safely with these glasses designed for direct solar observation.Manufactured to the same standards of safety typical to the entire family of Lunt Solar Systems products - the premium manufacturer of Solar telescopes and filters.FEATURESproduces a very natural light-yellow sun imageideal for safe visual observation of the sunvery resistant to damage100% safeSCOPE OF DELIVERYSolar eclipse glasses (5 pieces)
LUNT Solar Eclipse Glasses (1 piece)
£6.00*
Observe solar eclipses, sunspots, and airplane flybys in front of the sun safely with these glasses designed for direct solar observation.Manufactured to the same standards of safety typical to the entire family of Lunt Solar Systems products - the premium manufacturer of Solar telescopes and filters.
FEATURESproduces a very natural light-yellow sun imageideal for safe visual observation of the sun very resistant to damage
100% safe SCOPE OF DELIVERYSolar eclipse glasses (1 piece)
LUNT O-ring 34mm for Pressure-Tuner at MT & THa solar telescopes
£5.00*
Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMSTwo rubber O-rings are installed into the Pressure-Tuner of Lunt Solar Systems solar telescopes to seal the air-pressure tuning system. Over time, the rubber of this O-rings can age and become porous, whereby the air-pressure can then no longer be maintained. When this happens, a old O-ring can be replaced by this spare part. The replacement is simple and can be done by the user. Installation instructions can be found here under the tab "Manuals" as a PDF file for download.Please be sure to note:Depending on the production series, the diameters of the Pressure-Tuner pistons can vary slightly. There are pistons for O-rings with 32mm inner diameter and 40mm outer diameter, and pistons for O-rings with 34mm inner diameter and 42mm outer diameter. Please check the diameter of your old O-rings, this spare part is an O-ring with 34mm inner diameter and 42mm outer diameter.If you need the smaller O-ring with 32mm inner diameter and 40mm outer diameter, this is the spare part with item number 0558330.The LS50THa telescopes have Pressure-Tuners with smaller diameters, for these you will need replacement O-rings with item number 0558320.After replacing a O-ring, the piston and cylinder of the Pressure-Tuner can be re-greased with grease available under item number 0558350.FEATURESInner diameter: 34mmOuter diameter: 42mmCannot be used separately, only as a replacement part on the Pressure-Tuner of MT and THa telescopes from Lunt Solar Systems.It does not matter what blocking-filter is at the MT or THa telescope.SCOPE OF DELIVERYSpare part one O-ring with 34mm inner diameter and 42mm outer diameter for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems
LUNT LS7-21ZE Zoom Eyepiece 7.2mm - 21.5mm
£280.00*
Lunt Solar Systems zoom-eyepiece with variable focal length from 7.2mm to 21.5mm, with 1.25 inch (31.7mm) connection.The special of this zoom eyepiece is that the optical layout offers highest quality views of the sun, but also on nightsky objects. LUNT minimized the reflections by using superb multicoatings and with care designed internal baffle system and blackened lens edges. The LUNT zoom-eyepiece is not the widest field zoom-eyepiece on the market, LUNT prefered best performance over widest field. The sun and stars are perfect pin point across the entire field of view without any visible distortion. The LUNT zoom-eyepiece is almost parfocal, from one end to the other end of the zooming way you need only 0.5mm to refocuse. The LUNT zoom-eyepiece has a very nice height adjustable eyeguard to protect your eye against day light reflections and to help you to find the perfect eye position.Please note that these eyepieces are only accessories for existing solar telescopes or filters when observing the sun. Solar observation alone with these eyepieces without additional solar filters is not possible!FEATURESFocal length: 7.2mm - 21.5mm continuously adjustableBarrel size: 1.25 inch (31,7mm)Diameter: 47mmHeight: 82mmWeight: 170gEye relief: 15mmLenses / Groups: 7 lenses / 4 GroupsField of view: 53° at 7.2mm - 40° at 21.5mmSCOPE OF DELIVERYLUNT Zoom Eyepiece 7.2mm - 21.5mm
LUNT Blue-Glass 20mm for B400 to B1800 blocking-filters
£14.00*
Spare part for blocking-filters from LUNT SOLAR SYSTEMS, suitable for B400, B500, B600, B1200 and B1800 blocking-filters.The H-alpha telescopes and filter systems from Lunt Solar Systems each include a blocking-filter. The blocking-filters have a blue colored filter part on the side facing the telescope. This blue colored filter parts may become a milky white layer at older blocking-filters if the blocking-filter was storded at high air humidity for some time. Please always store H-alpha telescopes and filters as dry as possible. If this blue colored filter part has become a milky white layer, it can be replaced with this spare part. The replacement is easy and can be done by the user himself. Installation instructions can be found here under the "Manuals" tab as a PDF for download.Please note that this replacement part can only be used on Lunt Solar Systems blocking-filters B400 to B1800. If the problem happens with the large B3400 blocking-filter, the B3400 must be sent to our service department for repair.FEATURESDiameter: 20mmCannot be used separately, only as spare part at blocking-filters from Lunt Solar SystemsFor B400, B500, B600, B1200 and B1800 blocking-filtersIt does not matter if the blocking-filters are installed in 90° zenith-mirrors or straight extension-tubesSCOPE OF DELIVERYSpare part 20mm blue glass for B400 to B1800 blocking-filters
EXPLORE SCIENTIFIC Sun Catcher Solar Filter for 150-160mm Newtonians
£42.00*
Explore Scientific's Sun Catcher Variable Large Aperture Solar Filters are available in many sizes to work on most telescopes from 60mm up to 10-inch Schmidt-Cassegrain and of course all Bresser and Explore Scientific Telescopes. The Solar Filter material being used is the new advanced 'Solarlite' Film manufactured by world famous Thousand Oaks Optical through years of research and development. 'Solarlite' a new solar film that has the optical quality of glass with the advantages of impregnated polymer. Perfect also for the solar astrophotographer.NOTE: All Explore Scientific Solar Equipment is rated ISO12312-2 supplied by Thousand Oaks Optical and approved for direct observation of the Sun. These solar filters are available in different sizes, the picture above shows three different sizes as an example. This is the solar filter with 127mm filter diameter.SPEZIFICATIONSSpecial objective filter for safe solar observationsISO12312-2 ratedField-stop diameter 127mmFits to outer telescope tube diameter from 150 to 280mmQuick individual match with your telescope diameterFast Setup - Easy UseSCOPE OF DELIVERY1x Sun Catcher solar filter
EXPLORE SCIENTIFIC Sun Catcher Solar Filter for 80-102mm Telescopes
£28.00*
Explore Scientific's Sun Catcher Variable Large Aperture Solar Filters are available in many sizes to work on most telescopes from 60mm up to 10-inch Schmidt-Cassegrain and of course all Bresser and Explore Scientific Telescopes. The Solar Filter material being used is the new advanced 'Solarlite' Film manufactured by world famous Thousand Oaks Optical through years of research and development. 'Solarlite' a new solar film that has the optical quality of glass with the advantages of impregnated polymer. Perfect also for the solar astrophotographer.NOTE: All Explore Scientific Solar Equipment is rated ISO12312-2 supplied by Thousand Oaks Optical and approved for direct observation of the Sun. These solar filters are available in different sizes, the picture above shows three different sizes as an example. This is the solar filter with 90mm filter diameter.SPEZIFICATIONSSpecial objective filter for safe solar observationsISO12312-2 ratedField-stop diameter 90mmFits to outer telescope tube diameter from 90 to 160mmQuick individual match with your telescope diameterFast Setup - Easy UseSCOPE OF DELIVERY1x Sun Catcher solar filter
LUNT Mini SUNoculars
£33.00*
Small 6x30 binoculars for solar observing in White-Light.This truly pocket sized binoculars with 6x magnification are only for solar observing. You can view and safely study large Sun-spots, transits and solar eclipses. The Sun's image shows in a pleasing orange colour, rather in a harsh blue-white, as it does in some other white light filters.Lunt Mini SUNoculars have White-Light filter film installed inside the binoculars. This makes solar observation 100% safe. The light of the sun is reduced to a comfortable 0.00001% transmission and all ultra-violet and infrared components are completely and safely blocked.Lunt SUNoculars are manufactured to the same standards of safety typical to the entire family of Lunt Solar products - the premier manufacturer of Solar telescopes and filters.FEATURESMagnification: 6xObjective lens diameter: 30mmEye relief: 9mmTransmission: 0.00001% (OD5)Filter type: Solar film, CE certifiedLength: 105mmWidth: 110mmWeight: 160gSCOPE OF DELIVERYMini SUNoculars in blister packStrap
LUNT Sol Searcher
£46.00*
Sol-Searcher for installing on all solar telescopes of Lunt Solar Systems. The tube rings of the LUNT solar telescopes are prepared for the mounting of this Sol-Searcher."I can't find the Sun!" sounds funny. However, the Sun is tricky to find in a properly filtered telescope, and you don't ever want to chance a direct gaze, let alone a magnified image of it.This Sol-Searcher is the safe and easy way to find the Sun. It is absolutely safe since you don't look through Sol-Searcher, you look at it. The aperture acts as a "pinhole" which projects an image of the Sun on to the 1/4" translucent "screen." This screen can be viewed from either side. Simply move your scope until the Sun's image is centered on the screen and the Sun will be in the eyepiece's field of view.The solar telescopes from Lunt Solar Systems are fitted for installing this Sol-Searcher. Only at the LS130MT and LS152THa telescopes the additionally adapter 0554302 will be needed.SCOPE OF DELIVERYTeleVue Sol-SearcherScrewsHexagon wrench
LUNT Adapter-Plate LS100FHa for up to 120mm Ø
£121.00*
Adapter plate for mounting a LUNT LS100FHa front-filter at a telescope with up to 120mm front outer diameter.With this adapter you can mount a LS100FHa at your existing astronomical telescope with up to 120mm outer diameter, in order to use this telescope for solar observing in H-alpha. The adapter is plugged onto the front of your telescope, and the filter can be screwed onto the adapter.PLEASE NOTE:This article no. 0557442 gives only the price for a complete range of different adapter-plates up to 120mm diameter. The real adapter-plate will be manufactured exactly for your telescope. Therefore we need the exact outside diameter of your telescope or the dew shield!When ordering, you will find a field for comments, please note there the appropriate diameter!Then we will manufacture a adapter-plate for the diameter that you have noted. Manufacturing time will be 2 to 3 weeks.If you have any questions, you can contact us by e-mail or telephone.SCOPE OF DELIVERY1x adapter plate manufactured by your specifications(Filter not included)Delivery time 2-3 weeks
LUNT B600d1 Blocking-Filter in 1.25 inch zenith mirror diagonal
£654.00*
Blocking-filter in 90° zenith mirror diagonal, for telescopes up to 540mm focal length, and with 1.25 inch (31.7mm) focuser. Can only be used together with a LUNT H-alpha filter, or with a LUNT H-alpha telescope!Lunt Solar Systems offers blocking-filters in different sizes, and alternatively in 90° star-diagonal housings or straight extension tubes. You can choose what blocking-filter you will use at your LUNT H-alpha Etalon system.The B600d1 is installed in a 90° star-diagonal housing, for 1.25 inch (31.7mm) focuser on the telescope side, and with T2 thread and 1.25 inch eyepiece connection on the eyepiece side. The B600d1 can be used at LUNT H-alpha systems, if the used telescope has a 1.25 inch focuser and up to 540mm focal length.The blocking-filter can not be used without additional H-alpha filter system from Lunt Solar Systems! Blocking-filters are absolutely required for the safety and performance of H-alpha telescopes for solar observing. Lunt Solar Systems blocking-filters contain a unique filter system. We can only warranty safety or performance, if blocking-filter is paired with a H-alpha filter or H-alpha telescope of Lunt Solar Systems.At the tab "Accessories" you will find H-Alpha telescopes and filters with which this blocking filter can be combined.FEATURESBlocking-filter only usable at additional H-alpha filter systemFilter diameter: 6mmUsable at telescopes up to 540mm focal90° star-diagonal housing1.25 inch slide tube for 1.25 inch focuserConnection for 1.25 inch eyepiecesT2 thread for camera connectionSCOPE OF DELIVERYBlocking-filter B600d1 in 90° star-diagonal for 1.25 inch focuser
LUNT 1.25" Slide-Tube for blocking filters
£45.00*
1.25" slide-tube, adapts Lunt Solar Systems 2" blocking-filter in star diagonal to telescopes with 1.25" focuser.FEATURESThread to blocking-filter: T2Length 1.25" slide-tube: 28mmSCOPE OF DELIVERYAdapter 2" LUNT Blocking Filter to 1.25" focuser(Blocking-filter not included)
Customers also viewed
LUNT LS50FHa/B1800d2 H-alpha solar filter
£3,459.00*
50mm H-alpha solar filter system with B1800 blocking filter, for front mounting at telescopes with 2" focuser, and up to 1620mm focal length.The LS50FHa H-alpha Etalon filter system with 50mm aperture (no central obstruction) for use on any refractor and many other telescopes. Because the LS50FHa has an estimated bandwidth of <0.75 Angstrom it is capable to providing high contrast views of both solar surface and edge detail (prominences).The system includes the B1800 blocking filter, which is usable for telescopes up to 1620mm focal length. Larger blocking filters suitable for longer focal length are also optional available. The blocking filter is installed in a 90° star diagonal for 2" focuser. This diagonal is equipped with a reception for 1.25" eyepieces and a T2 camera connection.Adding an additional available double-stack Etalon system will reduce the bandwidth to ~<0.55 Angstrom.FEATURESAperture: 50 mmNo central obstructionBandwidth: <0.75 AngstromTuning: tiltable EtalonHousing diameter: 95 mmLength: 73 mmWeight: 0.7 kgFront thread: M90x1 female threadRear thread: M90x1 male threadBlocking filter: B1800 in diagonal for 2" focuserMaximum focal length of telescope: 1620 mmSCOPE OF DELIVERYLS50FHa solar filterB1800 Blocking Filter (for 2" focuser) in star-diagonalTransport caseInstruction manual
LUNT LS100MT/R&P Multipurpose APO Telescope OTA without Blocking Filter
£8,368.00*
Modular designed multipurpose telescope, both for observing the sun in the H-alpha wavelength, as well as for night sky observations. Easy conversion between the different applications with a few simple steps. 3-lens apochromatic telescope with FPL-53 glass, 100mm aperture and 714mm focal length - excellent image quality for H-Alpha solar observation and also for observing the starry sky at night.With innovative air pressure tuning system and good 2 inch (50.8mm) R&P focuser. Delivered without blocking filter, use for H-Alpha sun observation only possible with additional blocking filter!This telescope is supplied without blocking filter. We offer a wide range of additionally available blocking filters in different sizes, either mounted in a 90° star-diagonal housing or in a straight extension tube. These are all usable with this telescope.ATTENTION: Without such an additional blocking filter you cannot use this telescope for H-alpha solar observation!Solar observing in H-alpha:The LS100MT is a telescope for observing the sun in H-alpha light, with 100mm free aperture (no central obstruction) and 714mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An internal Etalon filter achieves a bandwidth of <0.7 Angstrom with the innovative air pressure tuning system Pressure-Tuner. Tuning is done by slightly changing the air pressure in a pressure chamber inside the telescope. This changes the refractive index of the air, making it easy to tune to the H-alpha line. The pressure tuner guarantees a homogeneous image, without central obstruction, and a permanently protected Etalon without erosion. A set of collimating lenses installed in the telescope ensures best performance.Fine adjustment is achieved with a solid 2 inch R&P focuser with 10:1 reduction.This version of the LS100MT is delivered without blocking filter. Therefore an additional blocking filter is required to use the telescope for solar observation in the H-alpha wavelength. You can choose from the wide range of Lunt Solar Systems blocking filters and decide for example if you want a blocking filter in a 90° star-diagonal housing or one in a straight extension tube.Observing the starry night sky:The H-Alpha Etalon system can be removed from the telescope in a few easy steps thanks to its modular design. With the additionally available conversion kit (item number 0551430) the 3-lens apochromatic refractor can then be used as a normal telescope with 100mm aperture and 714mm focal length for observation and photography of the night sky. The FPL-53 triplet lens offers an outstandingly low colour aberration image. Common 2 inch star diagonals can be used at the high quality R&P focuser of the conversion kit 0551430.Please note that the optionally available conversion kit 0551430 is absolutely necessary if the telescope should be used at night.More applications:With additionally available accessories the LS100MT offers even more possibilities!- Double-StackThe LS100MT telescope can optionally be upgraded with the additionally available double-stack module DSII/SFPT (item number 0551395). The DSII system is a internal double-stack module. Thereby a bandwidth of <0.5 Angstrom is achieved for H-alpha solar observation. Therefore much more details on the solar surface will become visible.- Solar observing in White-LightIf the H-alpha unit has been removed, of course either a sun filter to be installed in front of the objective, or a Herschel-wedge at the focuser can be used to observe the sunspots in White-Light.- Solar observing in Ca-K wavelengthCertainly, the Ca-K filter modules from Lunt Solar Systems can also be used at the LS100MT to observe and photograph super-granulation and other effects visible in this wavelength on the sun.This makes the LS100MT a completely universal usable apochromatic telescope of highest quality!FEATURES3-lens APO refractor, FPL-53Aperture: 100mm (no central obstruction)Focal length: 714mmBandwidth: internal Etalon with <0.7 AngstromTuning: air pressure tuning system Pressure-TunerSupplied without blocking filter, additionally available blocking filter absolutely necessary!Focuser: R&P with 10:1 reductionTwo tube-ring with handleSol-Searcher installed inside handleDovetail bar at GP-level for astronomical mountsWeight: 6.8kgLength with dew-shield: 78cmLength with removed dew-shield: 65cmSCOPE OF DELIVERYLS100MT Multipurpose TelescopePressure-Tuner2 inch R&P focuser with 10:1 reductionTube rings with dovetail barTransport case (78x33x23cm)Instruction manualConversion kit for observation of the starry night sky (0551430) not included!
LUNT LS80MT/B1800FT Multipurpose APO Telescope for Sun + Night-Sky
£8,343.00*
Modular designed multipurpose telescope, both for observing the sun in the H-alpha wavelength, as well as for night sky observations. Easy conversion between the different applications with a few simple steps. 2-lens ED Apo telescope with FPL-53 glass, 80mm aperture and 560mm focal length - very good image quality for H-Alpha solar observation and also for observing the starry sky at night.With innovative air pressure tuning system, excellent 2 inch (50.8mm) Feather-Touch focuser, and B1800 blocking filter.Solar observing in H-alpha:The LS80MT/B1800 is a complete telescope for observing the sun in H-alpha light, with 80mm free aperture (no central obstruction) and 560mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An internal Etalon filter achieves a bandwidth of <0.7 Angstrom with the innovative air pressure tuning system Pressure-Tuner. Tuning is done by slightly changing the air pressure in a pressure chamber inside the telescope. This changes the refractive index of the air, making it easy to tune to the H-alpha line. The pressure tuner guarantees a homogeneous image, without central obstruction, and a permanently protected Etalon without erosion. A set of collimating lenses installed in the telescope ensures best performance.Fine adjustment is achieved with a excellent 2 inch Feather-Touch focuser from Starlight-Instruments with 10:1 reduction.Blocking-filter is the B1800. The B1800 is very good for visual solar observing and also for photography.The star diagonal in which the blocking filter is installed, is equipped as standard for 1.25 inch eyepieces and with a T2 camera connection.Observing the starry night sky:The H-Alpha Etalon system can be removed from the telescope in a few easy steps thanks to its modular design. With the additionally available conversion kit (item number 0551330) the 2-lens ED Apo refractor can then be used as a normal telescope with 80mm aperture and 560mm focal length for observation and photography of the night sky. The FPL-53 doublet lens offers an low colour aberration image. Common 2 inch star diagonals can be used at the high quality R&P focuser of the conversion kit 0551330.Please note that the optionally available conversion kit 0551330 is absolutely necessary if the telescope should be used at night.More applications:With additionally available accessories the LS80MT offers even more possibilities!- Double-StackThe LS80MT telescope can optionally be upgraded with the additionally available double-stack module DSII/SFPT (item number 0551395). The DSII system is a internal double-stack module. Thereby a bandwidth of <0.5 Angstrom is achieved for H-alpha solar observation. Therefore much more details on the solar surface will become visible.- Solar observing in White-LightIf the H-alpha unit has been removed, of course either a sun filter to be installed in front of the objective, or a Herschel-wedge at the focuser can be used to observe the sunspots in White-Light.- Solar observing in Ca-K wavelengthCertainly, the Ca-K filter modules from Lunt Solar Systems can also be used at the LS80MT to observe and photograph super-granulation and other effects visible in this wavelength on the sun.This makes the LS80MT a completely universal usable ED Apo telescope of very good quality!FEATURES2-lens ED APO refractor, FPL-53Aperture: 80mm (no central obstruction)Focal length: 560mmBandwidth: internal Etalon with <0.7 AngstromTuning: air pressure tuning system Pressure-TunerBlocking filter: B1800 with 1.25" and T2 connectionFocuser: Feather-Touch with 10:1 reductionTwo tube-ring with handleSol-Searcher installed inside handleDovetail bar at GP-level for astronomical mountsWeight: 4.95kgLength with blocking filter and dew-shield: 62cmLength without blocking filter and removed dew-shield: 50cmSCOPE OF DELIVERYLS80MT Multipurpose TelescopePressure-TunerB1800 blocking filter in star-diagonal housing2 inch Feather-Touch focuser with 10:1 reductionTube rings with dovetail bar and sol-searcherTransport case (78x33x23cm)Instruction manualConversion kit for observation of the starry night sky (0551330) not included!