Tripods

BRESSER Field Tripod ST-3 stainless steel

The BRESSER Field Tripod ST-3 is a solid and height-adjustable tripod with double tripod leg clamp and made of corrosion-resistant stainless steel. It is suitable for direct usage with the BRESSER Slider Binocular Mount. Adjust the extendable stainless steel tripod to the desired base height and thereby pre-select your favourite observation position. For example, for landscape observation while standing or sitting, the full tripod height should be used. For night sky observation, a lower setting is recommended to ensure a comfortable viewing position while sitting or lying down. The tripod is equipped with a standard GP mounting head and a central screw with metric M10 threaded shaft. It is also suitable for EXOS-1 and EXOS-2 EQ mounts. The upper tripod leg tubes have a diameter of 50.8 mm (2 inches).FEATURESFor usage with BRESSER Slider Binocular Mount Standard GP mount head Also suitable for EXOS-1 and EXOS-2 EQ mounts Solid stainless steel and aluminium structure Double tripod leg clamp Height adjustable approximately from 68 to 110 cm Tripod weight: 5.5 kg Transport length approximately 87 cmUpper tripod leg tubes have a diameter of 50.8 mm (2 inches)SCOPE OF DELIVERYTripod Accessory tray Central spindle

£189.00*

Vixen rigid Accessory Tray for HAL130 and Porta II Tripods

The Vixen rigid Accessory Tray for HAL130 and Porta II Tripods offers practical storage space for eyepieces and various accessories.It also improves the overall stability of the tripod.The tray can be used on the HAL130 and SXG HAL 130 for GP and SX, as well as on the Porta II tripod.PROPERTIESFor eyepieces and various accessoriesIncreases the stability of the tripodsCan be used on HAL130, SXG HAL 130 and Porta tripodsWHAT'S INCLUDEDTray for tripodsScrew set

£27.00*

BRESSER Tripod TP-100 DX with carry bag

Do you own a BRESSER StarTracker Astrophoto Mount PM-100 (Art.No.: 4964120) and are looking for an ultra-stable tripod ? Then the height-adjustable TP-100 DX aluminium tripod from BRESSER is an extremely stable base. With the help of a 1/4 inch photo thread screw, the BRESSER astrophoto mount is firmly attached to the tripod. This allows you to use the astrophoto mount in azimuth mode for time-lapse and panorama shots. For the production of astronomical photos we recommend the use of the BRESSER Micro Motion Head MH-100 (Polar-Wedge) art. no. 4964140. This is screwed directly onto the tripod head and establishes the connection to the astrophoto mount. This allows the astrophoto mount to be set in EQ mode and rotate the saddle-mounted camera precisely against the earth's rotation and thus the stars remain in pinpoint shape even with long exposures. FEATURES Tripod for BRESSER astronomical photo mount (Art.4964130) Universal tripod with 1/4" mounting screw Height-adjustable aluminium tripod with adjustable centre column Large clamping levers for easy operation Tripod legs with 3-fold extension Tripod height min. 54cm; max. 134cm Tripod height in macro position: 24 cm Transport dimensions: 60x10x10cm Weight tripod: 1,7 kg Weight carry bag: 0,5 kg SCOPE OF DELIVERY BRESSER Tripod TP-100 DX Tripod bag with carrying strap Instruction manual

£111.00*

Vixen SXG-HAL130 Aluminum Tripod for GP, SX & AP Mounts

High-quality, stable aluminium tripod for a variety of mounts with 45 mm connections. The aluminium profile ensures firm positioning with a minimum amount of vibration. Suitable for GP2, GPD2, AP, SX, SXP, SXP2 and AXJ mounts or similar with 45 mm connections. FEATURES Robust aluminium tripod without mount Suitable for: GP-, SX- & AP mounts Height-adjustable: 81 - 130 cm Weight: 5.5 kg WHAT’S INCLUDED Aluminium tripod Adjustment pins for GP2, GPD2, AP and SX mounts

£258.00*

Vixen SXG Half Pillar for GP, AP & SX Mounts

For mounting a GP2, GPD2, SX or AP mount with 45mm base on the SXG or AP tripod. Prevents long telescopic tubes from hitting the mount. FEATURES Suitable for SX, SXD2, SXP, GP2, GPD2, SKYPOD, HF2 GPD and GP mounts with 45mm connectorHeight 207mm Diameter 130mmWeight 1,8 kg SCOPE OF DELIVERY Half PillarAdjustable pivot for GP2, GPD2, AP and SX mounts

£186.00*

Vixen ASG-CB90 Carbon Tripod

Despite being developed for heavy mounts, the Vixen ASG CB90 carbon tripod is one of the lightest tripods on the market. The ASG CB90 tripod was originally designed for the new AXJ mount. However, it is also ideally suited to the tried-and-tested SX, HF2, AP, GPD2 and GP2 mounts. The hand nuts can be loosened to extend the tripod by one section. The legs of the ASG CB90 tripod can be secured by a reliable screw cap and are equipped with a 2.5 cm interval scale marking. FEATURES 2-section carbon tripodLightweight and portable Stable design with minimal vibrationsDimensions: 545 mm to 900 mm length Connections: 45 mm pin hole Weight: 3.4 kg WHAT’S INCLUDED Carbon tripod

£500.00*

BRESSER Tripod with Polar Wedge for photo mount

Do you already own a BRESSER Photo Mount (Product No. 4964111) and you are searching for an extremly stable field tripod ?The height-adjustable stainless steel tripod with polar wedge is an extremely stable base for the BRESSER photo mount. Thanks to the integrated circular level in the tripod head even the leveling of the photo mount is child's play. The photo mount's head can be installed directly on the top of the polar wedge using two 1/4 photo thread screws. The distance between the two holes is 35mm, the hole diameter 6.3mm and is suitable for 1/4" photo thread screws. FEATURESTripod for BRESSER äquatorial Photo-Mount (Product No. 4964111)Adjustable stainless steel field tripod with polar wedge and bubble levelLarge screws and handles for easy usage at nightTripod height max. 125cm Weight tripod with polar wedge: 3.5 kgCarry capacity is up to 5,0 kgSCOPE OF DELIVERYUltra-stable stainless steel field tripod with bubble levelPolar wedge with adjusters for pole height and azimutInstallation tools

£135.00*

Vixen APP-TL130 Tripod for AP, GPD & SX Mounts

The APP-TL130 tripod is a lightweight, portable tripod for all standard Vixen mounts with a 45 mm support. Compatible tripods include the Vixen HF2, SX, AP and AXJ mounts. The tripod is adjustable in 3 sections and can be retracted to a very small size. Weighing just 3 kg, it is ideal for astronomy trips. FEATURES Leg section: 3x extendable Maximum extended height: 1296 mm Minimum retracted height: 598.4 mm Material: Aluminium Weight: 3.0 kg Maximum height: 1159 mm (height above the ground) Minimum height: 526 mm (height above the ground) WHAT’S INCLUDED Aluminium tripod Adjustment pins for GP2, GPD2, AP and SX mounts

£195.00*

Vixen TR102 tripod for AXD mount

Ultra sturdy tripod for AXD and AXD2 mounts.The tripod is vibration resistant and features 2 extendable sections.FEATURESVixen TR102 tripod for AXD/AXD2 mount Dimensions: Ø 55mmLength of legs: 760 mm to 1018 mmTripod height: 690 mm to 915 mmHolder: Base with 440 mm to 570 mm radiusWeight: 13.3 kgDELIVERY CONTENTTR102 tripod

£1,495.00*

Vixen AXD-P85 DX Observatory column for AXD mount

Stable observatory column for AXD and AXD2 mount. The column is also suitable for the AXJ mount with an additional adapter. FEATURES Stable column for AXD mount Designed for observatories Minimal vibrations Column dimensions: 139.8 mm Ø x 881.5 mm long Thickness: 3.8 mm Cross-shaped feet: 450 mm radius Weight: 24.5 kg DELIVERY CONTENT AXD-P85 DX observatory column Screws Mounting tool

£1,776.00*

Details