Weather station accessories and spare parts

Find the perfect sensors and base units for your system

Accessories

Digital weather station with a large LCD display showing temperature, humidity, weather forecast, and time

Additional Base Stations

BRESSER weather station sensor with wind gauge, rain gauge, and thermo-hygrometer

Outdoor Sensors

BRESSER Precision Thermo-Hygro Sensor

NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.1519615197151981519915201154391544015659156601647970025317002541700257170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre. FEATURES Temperature measurement function Humidity measurement function 7 available channels Built-in display, can also be used as a standalone solution without a weather centre Temperature range: -20 ~ 60℃ Wireless frequency: 868 MHz Ultra-long range of up to 150 m Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Outdoor sensor Instruction manual

Available

£33.99*

BRESSER Thermo-Hygro Sensor 7 Channel 868 MHz

NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.1565970025317002541700257170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 Remote sensor for measuring of temperature and humidity. Seven channels settable. With extra long radio range of 150 meters on a radio frequency of 868 MHz. Good news for smart home owners: this sensor can be seamlessly integrated into the leading smart home system when paired with a compatible Tuya-enabled weather station. FEATURES Temperature measuring Humidity measuring 7 channels settable RC frequency: 868 MHz Extra long radio range of 150 meters! Suitable for smarthome systems by Tuya Powered by battery; 2x AA (LR6) (not included!) SCOPE OF DELIVERY Remote sensor

Available

£33.99*

BRESSER Thermo-Hygro Sensor 433 MHz

NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.148951499314998150041513115243152981540515406154071540815409154181544415479154961565216206162077000012CM30007000012GYE00070000137000020CM30007000020GYE0007000020QT50007000023700002770000297000030700006070042007004200GYE0007004200HZI0007004200MGU0007004200QT50007004210700433070043407004350700436070043707004380700650070065107006511700720170073507007402700740370074047007511700752070076107007620907060090707009070710960410196042009604210700001200000070000200000007004200000000 Living room, bedroom and children's room, kitchen and of course the bathroom - all benefit from a regular room climate check to ensure optimal comfort. So, enhance your weather station with this BRESSER Thermo-Hygro Sensor, allowing you to monitor conditions at an additional location. The sensor sends data over a significant distance of up to 80 meters, instantly displaying it on your base station's screen. Wondering if it's really that warm? The sensor includes an LCD display for immediate, on-site verification of current readings. This feature also enables this temperature and humidity meter to function as a standalone thermo-hygrometer. FEATURES Measures temperature and humidity Easy-to-read LCD display Functions as an independent solution, or as a replacement or supplementary sensor for select BRESSER weather stations Maximum range of up to 80 meters IP Protection Class: IP44Frequency: 433 MHz Dimensions: 71 x 65 x 23 mm / weight: 44 g Powered by 2x 1.5V AAA batteries (not included) SCOPE OF DELIVERY Thermo-Hygro Sensor Instruction manual

Available

£23.99*

BRESSER Soil Temperature and Moisture Meter

NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15196151971519815199152011543915440156591566016479700254170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 This additional sensor allows you to take two additional practical measurements with your BRESSER weather station. In addition to the soil temperature, the sensor can also measure the soil moisture – ideal for plant lovers and gardeners. Measurements are sent to the base station at 60 second intervals. The soil moisture meter can be positioned up to 150 metres away from the base station. There are also 7 different channels to choose from. And thanks to the weatherproof housing, the wireless sensor is able to withstand adverse weather conditions. FEATURES Wireless and compact soil sensor Measures the soil humidity Measures the soil temperature Transmission interval: 60 seconds Extra-long range of up to 150 metres Cable length: approx. 140 cm 7 available channels LED indicator for data transmission Weatherproof housing Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Soil sensor Instruction manual

Available

£36.99*

BRESSER Spa and Pool thermometer

NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198151991520115439154401565915660164797002531700254170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 Want to cool off in your pool? This wireless and floating pool thermometer from BRESSER will tell you whether the water is at an optimal temperature. Measurements are shown on the built-in LCD display. You can also connect the pool thermometer to your BRESSER weather centre so that you can check the pool temperature from the comfort of your own home. FEATURES Floating pool sensor for measuring the water temperature LCD display for displaying the temperature (°C/°F) Wireless frequency: 868 MHz Wireless transmission range of up to 30 m to optional base station 7 available channels Waterproof (IPX7) Powered by 2x AA batteries (not included) DELIVERY CONTENT Pool thermometer Instruction manual

Available

£36.99*

BRESSER 5-in-1 Outdoor Sensor

NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station. WARNING! One or more of the listed weather stations have a lot number restriction, so please also check the lot number of your device.1520015201156597002510 (from lot number 1181632)7002511 (from lot number 1199241)7002512 (from lot number 1233002)700251370025257002550CM30007002550GYE0007002550MGU0007002550QT50007002571700258070025817002585700259070026107002620908050096025107002550000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000 This high-quality replacement part will quickly get your weather station back in working order. FEATURES Replacement wireless sensor, transmits data to the WiFi colour weather centre Measures wind speed, wind direction, humidity, external temperature and precipitation Transmission frequency: 868 MHz Power supply: 3x AA batteries (not included) SCOPE OF DELIVERY Multifunctional external sensor Mounting materials No base station included Instruction manual

Available

£74.99*

BRESSER Lightning Detector

NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198154407002610700262070032107003220700323070032407003520 The BRESSER lightning detector keeps you informed during stormy weather. It displays a light signal when it detects a lightning strike within a range of approximately 40 kilometres. To get the most out of the lightning detector, you can connect it to your BRESSER weather centre: from there, you can view the time since the last lightning strike, including the estimated distance, as well as the number of lightning strikes per hour. And to ensure that the lightning sensor is configured to your surroundings, you can choose from 3 different sensor sensitivity levels. FEATURES Lightning sensor for measuring lightning strikes Displays a light signal when a lightning strike is detected The following data can be viewed when connected to a compatible BRESSER weather centre:Time since last lightning strike, including estimated distanceNumber of lightning strikes per hour LED indicator for data transmission Range of up to 100 metres Adjustable sensor sensitivity (high/medium/low) Power supply: 2x AA batteries (not included) DELIVERY CONTENT Lightning sensor Instruction manual

Available

£42.99*

BRESSER Thermo-Hygro RC Transmitter 5CH

Living room, bathroom, kitchen, wine cellar – there's no shortage of spaces where keeping an eye on the indoor climate makes sense. But one or two temperature and humidity sensors can quickly fall short. Add this neat little thermo-hygrometer sensor to your compatible weather station and keep tabs on every corner of your home.This device is compatible with weather stations with the following article numbers: 7001001 7001030 7001101 7002500 7003101 7004000 7004001 7004002 7004110 7004250 7004300 7004301 7007000 7008000 7008001 7007300CM3000 7007300QT5000 7009000FEATURES Measures temperature and humidity For some BRESSER weather stations with 433 MHz frequency (see compatibility list) 5 adjustable channels Clear display 50m range (in open terrain) SCOPE OF DELIVERY Thermo-hygrometer sensor Instruction manual

Available

£18.99*

BRESSER 7-in-1 Outdoor Sensor with Adjustable Solar Panel

NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15197151981519915660700254170025827002586700261070026207003200700321070032207003230700324070033007003360700340070035007003510700370070038007003900700440690806009080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000 This high-quality replacement part will quickly get your weather station back in working order. FEATURES Powered via a large movable solar panel In case of insufficient sunlight operation via 3x AA batteries (not included) Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensityRange: up to 150 m Dimensions: 390 x 174 x 465 mm SCOPE OF DELIVERY Solar-powered outdoor sensor Mounting materials Base station is not included! Instruction manual

Available

£146.99*

BRESSER Thermo-Hygro Sensor 3CH - Suitable for BRESSER Thermo-Hygrometer

NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.70074007007500950120095012019501202 Living room, bathroom, kitchen, wine cellar – there's no shortage of spaces where keeping an eye on the indoor climate makes sense. But one or two temperature and humidity sensors can quickly fall short. Add this neat little thermo-hygrometer sensor to your compatible weather station and keep tabs on every corner of your home. FEATURES3 channel available433 MHz transmitting frequencyFoldable standIntegrated hole for easy wall mountingRequires 2x AAA batteries (not included) SCOPE OF DELIVERYThermo/Hygrometer

Available

£18.99*

BRESSER 7-in-1 Outdoor Sensor

NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15197151981519915660700254170025827002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700330070033607003400700350070035107003600CM30007003600GYE0007003600QT50007004406908060070031000000007003600000000WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000 This high-quality replacement part will quickly get your weather station back in working order. FEATURES Replacement wireless sensor, transmits data to the Wi-Fi Comfort weather centre Measures the outdoor temperature and outdoor humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensity Transmission range of up to 150 metres Place in an unobstructed location in order to obtain accurate sunlight and rain data Power supply: 3x AA batteries (not included) SCOPE OF DELIVERY Wireless sensor Mounting materials Base station is not included! Instruction manual

Available

£93.99*

BRESSER Thermo-Hygro Sensor 3CH for ClimaTrend MC/TB and most products of the ClimaTrend Series

NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.70602009070500 Living room, bathroom, kitchen, wine cellar – there's no shortage of spaces where keeping an eye on the indoor climate makes sense. But one or two temperature and humidity sensors can quickly fall short. Add this neat little thermo-hygrometer sensor to your compatible weather station and keep tabs on every corner of your home. FEATURESTemperature displayHumidity display3 channels settableRC frequency: 433 MHz SCOPE OF DELIVERYRemote sensor

Available

£28.99*

BRESSER 7-in-1 Outdoor Sensor with Solar-Assisted Battery Operation

NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15197151981519915660700254170025827002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700320070032107003220700323070032407003300700335070033607003400700350070035107003600CM30007003600GYE0007003600QT500070037007003800700390070044069080600908070070031000000007003600000000WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000 This high-quality replacement part will quickly get your weather station back in working order. FEATURES Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensity Solar power for longer battery lifespan Range: up to 150 m Power supply: 3x AA batteries (not included) Dimensions: 420 x 170 x 213 mm SCOPE OF DELIVERY Wireless sensor with installation material Base station not included! Instruction manual

Available

£122.99*

BRESSER Water Detector

NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198152011543915440156597002610700262070032007003210700322070032307003240700352070038009080700 Whether it’s the washing machine in your basement or the dishwasher in the kitchen, old appliances are susceptible to water leaks. The BRESSER water detector triggers a 90 dB alarm tone when it detects a leak. If the sensor is connected to your BRESSER weather station, a symbol will also appear on the display of your base station, allowing you to take action before the water causes serious damage. Also a handy helper in aquaristics, where leaks occur frequently, for example when the sealing gasket on the external filter needs to be changed. FEATURES Water sensor for detecting water leaks Loud 90 dB alarm tone Range of up to 150 mCable length: approx. 140 cm 7 available channels Wireless and compact design Power supply: 2x AA batteries (not included) DELIVERY CONTENT Water detector Instruction manual

Available

£42.99*

BRESSER Wireless Sensor

NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15002154607001040 Living room, bathroom, kitchen, wine cellar – there's no shortage of spaces where keeping an eye on the indoor climate makes sense. But one or two temperature and humidity sensors can quickly fall short. Add this neat little thermo-hygrometer sensor to your compatible weather station and keep tabs on every corner of your home.FEATURES Measures temperature and humidity For some weather stations with 433 MHz frequency (see compatibility list) Clear display 50m range (in open terrain) SCOPE OF DELIVERY Thermo-hygrometer sensor Instruction manual

Available

£18.99*

BRESSER Additional / Spare Base Station for Weather Station 7002520CM3000

NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station. WARNING! One or more of the listed weather stations have a lot number restriction, so please also check the lot number of your device.7002510 (up to lot number 1181631)7002511 (up to lot number 1199240)7002512 (up to lot number 1233001)7002520CM30007002520000000 Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES Base station for 5-in-1 multi-sensor Indoor temperature (°C/°F) and humidity Graphical weather trend display (12 hours) Beaufort index (scale for measuring wind speed) Rainfall with history (day/week/month) Air pressure with history (24 hours) Heat index Dewpoint Radio-controlled time and date settings Display changes colour based on outdoor temperature Alarm function Ice/frost warning Min./max. memory (up to 24 hours) SCOPE OF DELIVERY Base station Stand Power adapter

Available

£93.99*

BRESSER Additional / Replacement Base Station for the WSX3001 Professional Wi-Fi Weather Station

NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.7002541700322070032307003240700350070035107003700700380070039009080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000 Would you like to view your weather data in an additional room? Are you looking for a gift to enable your neighbours to monitor your local weather? Or maybe the base station from your BRESSER Professional Wi-Fi Weather Station didn’t survive your recent move or your child’s latest tantrum? Whether you’re looking for an extension or a replacement, this base station will allow you to access all of your measurements on the large 20 cm screen. In addition to displaying the data from your 7-in-1 sensor (not included), it can also show the readings from up to 7 compatible additional sensors (not included). Share your weather data worldwide The base station can also be connected to online platforms such as Wundergound or Weathercloud so that you can share and access your weather data online. And with the German-language portal AWEKAS, you can integrate your measurements into your smart home system (configuration instructions: https://www.awekas.at/for2/index.php?thread/17080-software-api-stations-api-beschreibung-beta/). Additional base station – monitor the indoor climate in another room If your existing base station is in the living room, you can place a second base station in the kitchen or your child’s bedroom to view your local weather data in an additional room. The base station features a built-in thermo-hygro sensor, which measures the ambient temperature and humidity and displays a smiley symbol to indicate the quality of the indoor climate. You can then take effective measures to prevent the risk of mould or dry air. The additional base station is also ideal as a bedside clock. It features a built-in backlight that can be dimmed or switched off completely to ensure you get a good night’s sleep. And so that you wake up on time, it also has a practical alarm with a snooze function, as well as a frost warning function that triggers that alarm 30 minutes earlier when the outdoor temperature drops below -3°C – plenty of time to ensure that you get to work or school safely. Access all the practical functions of your BRESSER Professional Wi-Fi weather station with this additional/replacement base station. FEATURES WiFi connection with internet time synchronisation and support for firmware updates Publish your weather data on Wunderground or Weathercloud Indoor temperature (°C/ °F) and humidity (%) Displays the outdoor temperature (°C/ °F) and humidity (%) Light intensity (Klux / Kfc / W/m²) Displays the current UV index, exposure level and recommended protection Displays the sunburn time (mins) based on the current UV level Wind direction and speed (m/s; km/h; Knoten; mph) Beaufort index (scale for measuring wind speed) Air pressure with 24-hour history (hPa/inHg/mmHg) Rainfall with history (day/week/month) Graphical weather forecast for next 12-24 hours Weather index (‘feels like’ function, dew point, heat index, wind chill factor) Trend indicator shows the weather trends for the next few minutes Visual comfort level indicator for room temperature and humidity Phases of the moon Sunrise and sunset times Alarm with snooze function (5 minutes) and ice/frost warning Weekday alarm Min./max. memory (up to 24 hours) LED backlight, amber-coloured Wall bracket and table stand Supports a 7-in-1 sensor and up to 7 indoor sensors (sensors are not included) Dimensions: 215 x 172 x 29 mm and weight: 639 g Power supply: Power adapter and 3x AAA batteries as backup batteries (batteries are not included) Integrated Wi-Fi transmission to AWEKAS Security protocol: supports WPA3 encryption for firmware version 1.09 and above DELIVERY CONTENT Base station with stand Power adapter Instruction manual

Available

£86.13*

BRESSER Additional / Spare Base Station for Weather Station 7002510 from LOT no. 1181632

NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station. WARNING! One or more of the listed weather stations have a lot number restriction, so please also check the lot number of your device.15200152017002510 (from lot number 1181632)7002511 (from lot number 1199241)7002512 (from lot number 1233002)700251370025257002550CM30007002550GYE0007002550MGU0007002550QT500070025717002580700258170025857002590908050096025107002550000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000 The base station from the 5-in-1 weather station – now also individually – for an overview of measured values in multiple rooms. A base station in the living room and one in the bedroom, giving you an ideal overview whichever room you’re in. The clearly structured display on the base station also displays a range of history data. It enables internal storage and evaluation of the measured data over a 24-hour period. Using the measured data, the weather station calculates a very reliable local weather trend forecast for the next 12 hours, which is indicated on the display by six graphical symbols. There is a programmable alarm function for maximum and minimum values, which can emit an acoustic alarm and light signal if either value is reached. A special frost/ice warning alarm can also be configured for outdoor temperatures from -3 °C. A poor indoor climate can pose a particular health risk for children and the elderly. The BRESSER 5-in-1 weather station offers a smart feature to help tackle this. The indoor climate indicator uses symbols to visualise the current status of the indoor climate. In addition, the BRESSER 5-in-1 weather station also offers radio-controlled time and date setting (DCF time signal). The current central European time (CET) and date with day will be displayed within a few minutes of the device being switched on. For the moonstruck, the display also indicates the various phases of the moon. A wake function with snooze function is also included. FEATURES Base station for 5-in-1 multisensor and other weather stations Indoor temperature (°C/°F) and humidity Graphical weather trend display (12 hours) Beaufort index (scale for measuring wind speed) Rainfall with history (day/week/month) Air pressure with history (24 hours) Heat index Dewpoint Radio-controlled time and date settings Phases of the moon Alarm function Ice/frost warning Min/max memory (up to 24 hours) LED backlight, amber-coloured with removable stand and suspension device Requires 3x AA batteries WHAT’S INCLUDED Base station Stand

Available

£74.99*

BRESSER Additional / Spare Base Station for Weather Station 7003100CM3000/700100GYE000/7003100HZI000

NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.7002582700258670026207003100CM30007003100GYE0007003100HZI0007003100QT500070033007003600CM30007003600GYE0007003600QT5000908060070031000000007003600000000 Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES Receives weather data from 7-in-1 outdoor sensor for ClimateScout Weather Station via 868 MHz RF transmission frequency Clear, professional display with time and comprehensive weather information Integrated sensor for indoor temperature (°C/°F), humidity and air pressure with air pressure trend (24 hours) Room climate indicator Maximum and minimum value alarm Automatic cycle mode displays the different channels from additional sensors (not included) in 4-second intervals DCF time synchronisation (Central European Time, time delay can be set for use in other time zones), automatically switches between winter and summer time Alarm with snooze function and frost warning Time, calendar, day of the week and moon phase display Min./max. memory (up to 24 hours) Backlight Displays the graphical weather trend (12 hours) Displays the outdoor temperature (°C/°F), humidity, air pressure, UV index and light intensity (Klux, Kfc, W/m2) Displays the Beaufort index (scale for measuring wind speed) Displays rainfall data: hourly, daily, weekly, monthly, total precipitation (in/mm) - with indicator Weather index display for dewpoint, windchill factor and heat index Displays day of the week and wind direction in 5 languages EN/DE/FR/ES/IT) Can be wall-mounted or placed on desktop Base station dimensions: 180 x 135 x 22 mm (W x H x D) Display size: 125 x 77 mm (W x H) Power supply: 4x AA (not included) DELIVERY CONTENT Additional base station External sensor not included! Instruction manual

Colour

black silver white

Available

From £34.00*

Details

BRESSER Additional / Spare Base Station for Weather Station 7002580

NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station. WARNING! One or more of the listed weather stations have a lot number restriction, so please also check the lot number of your device.15200152017002510 (from lot number 1181632)7002511 (from lot number 1199241)7002512 (from lot number 1233002)700251370025257002550CM30007002550GYE0007002550MGU0007002550QT500070025717002580700258170025857002590908050096025107002550000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000 Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES Base station for 5-in-1 multi-sensor and other weather stations Indoor temperature (°C/°F) and humidity Displays the graphical weather trend (12 hours) Beaufort index (scale for measuring wind speed) Rainfall with history (day/week/month) Air pressure with history (24 hours) Heat index Dewpoint Radio-controlled time and date settings Phases of the moon Alarm function Ice/frost warning Min./max. memory (up to 24 hours) SCOPE OF DELIVERY Base station Stand Power adapter

Available

£103.99*

BRESSER HCHO + VOC Sensor

NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198154391544070026107002620700324070035207003700700380070039009080700 If there’s something in the air, it’s probably not very good for us. This could be formaldehyde (HCHO) or Volatile Organic Compounds (VOC), which can enter our ambient air through things like furniture, materials, tobacco smoke, paints or adhesives. With the BRESSER HCHO + VOC Sensor, you can keep an eye on the air quality and take targeted measures to improve the situation. The integrated LC display of the sensor displays precise formaldehyde readings as well as the VOC level in the air. Already have a compatible weather station from BRESSER? Then you can quickly connect the HCHO + VOC sensor and start to display the readings there as well. Use the BRESSER HCHO + VOC Sensor as a stand-alone solution to keep an eye on your air quality, or as an extension for your weather station. FEATURES Sensor for formaldehyde measurement (HCHO) with VOC content (Volatile Organic Compounds) Can be used alone or with select BRESSER weather stations Integrated LC display (37 x 21 mm) for displaying HCHO values and VOC content With battery level indicator 4 available channels Range: up to 150 m Power supply: USB connection and/or 3x AA rechargeable batteries, 1.2 V (included) Size: 82 x 120.5 x 43 mm SCOPE OF DELIVERY HCHO + VOC Sensor 3x AA rechargeable batteries, 1.2 V USB cable Weather station not included Instruction manual

Available

£178.99*

BRESSER Additional / Replacement Base Station for the 7003220 6-Day 4CAST PRO SF Wi-Fi Weather Station

Available

£87.00*

BRESSER Thermo Outdoor Sensor

NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.70042007004200GYE0007004200HZI0007004200MGU0007004200QT50007004210960420096042107004200000000 In bedrooms, study rooms, living rooms, bathrooms, and even kitchens – continuously monitoring the room temperature is beneficial in many areas of the house to ensure a pleasant living climate. Therefore, you can enhance your weather station with this precise BRESSER Thermo Outdoor Sensor for another measurement location. The temperature data is quickly and reliably transmitted to the display of your base station from a distance of up to 80 meters. How warm is it really here? The sensor has its own LCD display, so you can read the current temperature values directly on site. This makes the thermometer also ideal as a standalone thermometer. FEATURES Measurement of temperature Clear LCD display Suitable as a standalone solution, replacement, or additional sensor for some BRESSER weather stations Range: up to 80 m IP protection class: IP44 Dimensions: 71 x 64 x 22 mm / Weight: 44 g Battery operated: 2x 1.5 V AAA batteries (not included) SCOPE OF DELIVERY Thermo radio sensor Instruction manual

Available

£23.99*

BRESSER Additional / Spare Base Station for Anemometer 7002531

NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.7002531 Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURESReceives weather data from the 3-in-1 professional wind gaugeIntegrated sensor for measuring the humidity (%) and temperature (°C/°F)Graphical weather trend display (24 hours)Wind speed display (Avg = average, Gust = current gusts)Wind speed classification display (light, moderate, strong, stormy)Maximum and minimum value alarm functionWeather index display for dewpoint, windchill factor, feels-like temperature and heat indexAutomatically sets the time via DCF radio signalAlarm function with snooze buttonIce/frost alarmHistorical data memoryOrange LCD backlightAdjustable display contrastPower supply: 2 batteries (type AA, 1.5 V), not included SCOPE OF DELIVERYBase stationRemovable standExternal sensor not included!Instruction manual

Available

£34.99*

Weather station accessories and spare parts

Accessories

Filter products