Product information "Vixen Tube Clamp 115s for VSD90ss"
Vixen Tube Clamp 115s for VSD90ss
This high-quality tube clamp made in Japan is used to mount the VSD90ss f 5.5 astrograph. The base plate has M6 and M8 holes and can therefore be used on almost all mounts.
FEATURES
Supplied with various holes as standard
High-quality CNC-milled aluminium tube clamp with non-slip locking screw
Felt on the inside, prevents scratches on the VSD tube
Threaded screw holes bottom: M8 holes x 2 (spacing 35 mm), M6 holes x 2 (spacing 35 mm) x 2 rows, 1/4-inch holes x 3 (inside 30 mm), 1/4-inch holes x 3 (interval 30 mm)
Threaded screw holes top: M8 holes x 2 (spacing 35 mm) x 2 sets, M6 holes x 2 (spacing 35 mm) x 2 rows, 1/4-inch hole x 1 in the centre, M4 holes x 2 (spacing 20 mm)
Fast 90 mm high-performance astrograph for demanding astrophotographers and observers with 5 lens elements in 5 groups. Due to the complex optical structure with five lens groups and five elements (quintuplet), including two SD (Super ED) lenses and an ED lens (Extra-low Dispersion) , a virtually aberration-free optical system was created.
This revolutionary astrograph is compatible with a full-frame digital DSLR or an even larger 44x33 mm camera. The 90 mm astrograph with fast aperture ratio delivers exceptionally sharp, high-contrast and small point stars from the centre to the corners of the field of view. In addition, it is also ideal for visual observation with a very large field of view but also for planetary observation with high magnification.
The VSD90ss is designed so that there is a "long peak range" in the adjustment accuracy of the sharpness, so that photographers can always achieve satisfactory results in astrophotography. Even if the focus is not quite precise, round and sharp stars are still shown throughout the entire image field.
Illumination without vignetting
In most cases, an astrograph also produces optical vignetting (a gradual decrease in light rays towards the edge of the image) This is mainly caused by rear lenses being shaded by the front lenses. Because of this darkening, it is relatively normal for the photographer to have to further edit the image after taking the picture and also have to do some additional so-called flats before taking the picture. To solve this problem, the VSD90ss uses wide aperture lenses in the rear elements, securing over 90 % of the light volume at the edge of the 60 mm image circle. Since the light intensity is uniform throughout the entire image field of the VSD90ss, there is no need for complex technology to prevent edge darkening. The VSD90ss is coated with the most modern coatings of extremely high reflectivity. These coatings have been specifically developed to optimize the properties of each individual lens element without degrading contrast and light intensity across multiple lenses.
Numerous gradations of light bring beautiful point-like stars into the image field
The low optical vignetting ensures sufficient illumination and thus eliminates the asymmetric flare caused by bright, diffraction-limited stars. It prevents stars at the edge of the 60 mm image circle from exhibiting deformations such as comets, astigmatism or coma. Since the illumination of the image field is relatively similar from the center to the edge of the image, you can expect excellent star imaging.
Please note:
*Depending on the recording system used, mechanical vignetting can still occur due to the camera body or incorrect adapters.
96.7% Strehl for impressive visual observations
The VSD90ss offers a flattened large field of view with a low magnification wide angle eyepiece. Even with a high-quality wide-field eyepiece with a large field of view, you can get sharp images of stars in the entire field of view when visually observing! In the centre of the field of view, a Strehl intensity of an impressive 96.7% is achieved at visible wavelengths. This Strehl ratio exceeds that of the SD81SII apochromat at 95.7%, which is known for its excellent optical properties, and this also works excellently when observing the moon and planets at high magnification.
The versatile large and stable focuser
The VSD90ss has a large focuser with a diameter of 87.5 mm to make optimal use of the large illumination field of 60 mm. With the large extension that is compatible with many accessories, it is perfect for astrophotography up to large format or 35 mm full frame DSLR cameras. Thanks to its precise manufacturing, it is also suitable for very heavy cameras without tipping.
The precision locking lever of the eyepiece extension
The focuser's extension tube has a locking lever that holds the extension tube firmly in position even when using heavy cameras such as large format cameras or CCD cameras with a large sensor. The locking lever clamps the rack gear to the extension barrel so that the viewing angle or focus on your camera does not shift.
Compatible with motor driven focusers
An optional two-speed motor focuser (not included) is available for the VSD90ss to provide sensitive focusing. An EAF (Electronic Automatic Focuser) from ZWO or equivalent can also be retrofitted.
Optional VSD Reducer for even faster results
The tried and tested optional VSD reducer, which was also used on the predecessor, the VSD 100, is also compatible with the VSD90ss. The photographer gets even faster results in astrophotography with an aperture ratio of 1:3.9.
CHARACTERISTICS
90 mm aperture, 495 mm focal length (F5.5)
Needle-fine stars up to the image field edge in 44x33 mm format
5 lens elements in 5 groups
Image illumination up to 60 mm
Resolution power: 1.29
Limit size: 11.5
Light gathering capacity: 165x
Illumination: 60 mm
Dimensions: 115 mm diameter x 600 mm length (476 mm length for storage)
Weight: 4.3 kg
Connections/Thread: Size thread/84 mm (pitch 1 mm), 60 mm (pitch 1.0 mm), 42 mm for T-ring push fit / 60.2 mm, 50.8 mm and 31.7 mm
Solar observation: separately available solar projection approach B
Optional VSD100 reducer compatible (opening ratio F: 3.9)
SCOPE OF DELIVERY
VSD90ss high performance astrograph
The ASTRO R-LITE red light flashlight is the ideal companion at night to read star charts or make adjustments to the equipment without losing the dark adaptation of the eyes. The ASTRO R-LITE offers 3 functions: Continuous light bright / Continuous light dark / Flashing. The large diffusing lens results in a very large and evenly illuminated light cone, which can also be adjusted by a sliding mechanism. By using a power-saving LED lamp, the battery life (1 x AA-LR6) is up to 100 hours. Of course, the robust lamp housing made of aluminium is splash-proof according to IPX4 and therefore particularly well suited for outdoor applications. The side cutouts on the front of the ASTRO R-LITE provide a 360° signal function. The 50 cm long carrying strap with quick coupling and an extra belt clip included in the scope of delivery ensure that the flashlight is always quickly at hand. The ASTRO R-LITE should not be missing in any equipment. FEATURES ASTRO R-LITE Red Light Flashlight Reading star maps at night Dark adaptation of the eyes is retained Continuous light bright / Continuous light dark / Flashing 360° signal function Large diffusing lens produces a uniformly illuminated light cone Carrying strap and belt clip included Battery life up to 100 hours - Battery (1 x AA-LR6) Splash-proof according to IPX4Robust lamp housing made of aluminiumSCOPE OF DELIVERYASTRO R-LITE Red Light Flashlight Carrying strap Belt clip Battery (1 x AA-LR6)
With the 3-piece lens cleaning set you not only clean camera or binocular lenses, but also spectacles glasses and displays and screens of smartphones, laptops, tablets, etc. thoroughly and safely.
When cleaning high quality optical lenses, you have to be very careful. After all, it would be very annoying to successfully remove the dust but leave a scratch behind. With the lens cleaning pen you can safely clean optical and coated glass.
With the brush on one side you can remove coarser dirt before polishing the lenses with the other side. Just blow away fluff with the bellows.
FEATURES
complete set for safe cleaning of camera lenses
bellows for removing coarse dirt particles and fluff without scratching the lens
lint-free microfibre cloth approx. 14,5x14,5cm
lens cleaning pencil for safe cleaning of optical and coated glass
SCOPE OF DELIVERY
1x bellows
1x lens cleaning pen
1x microfiber cloth
300 mm adjustment shaft with flexible design for comfortable observations with the Porta II and the Mini Porta.The large adjustment knobs allow you to make smooth, fine adjustments to the axles.Also compatible with a wide range of other mounts from other manufacturers.FEATURESComfortable tracking by handLarge adjustment knobs for fine tuningDesigned for wide range of mountsLength: 300 mmDELIVERY CONTENT300 mm adjustment shaft
Each dew shield threads into the front lens cell and effectively inhibits the formation of dew on the lens surface in humid/cool observation conditions. Reduces reflections caused by scattered light incident from the side. Protects the front lens from accidental contact and scratches. FEATURES Prevents fogging of the front lens Reduces reflections caused by stray light Protects the front lens of the telescope Use in humid/cool conditions Suitable for BRESSER MCX127/MC127 telescopes Easy to screw into the telescopic tube Length: 120mm , weight: 160g SCOPE OF DELIVERY Dew cap, 1 piece
The 360 IV Lens Heater is designed to prevent camera lenses and telescopes from fogging up due to dew. It is also well suited for eyepieces.The heating element is a carbon fiber heater with a high thermal efficiency. The textile heating element provides great flexibility compared to other heating materials. The power cord (USB cable) has a particularly high flexibility to be still elastic at low temperatures. A very flexible Velcro tape allows for quick and easy attachment to and removal from the lens. The tape can be easily removed from the lens without pulling tightly. The heating tape has a very low power consumption and can be operated with a 10,000 mA battery for up to 14 hours.The Vixen Lens Heater 360 IV in detailWhen moisture in the air comes into contact with an object whose temperature is lower than the ambient temperature, small drops of water form - so-called dew condensation. Astrophotography often suffers from such lens fogging and the photo turns milky. Because the temperature and humidity change during the night and the camera becomes cooler than the ambient temperature, it is important to warm the objective's or telescope's lens by using heaters to prevent it from fogging. We recommend using the Lens Heater 360 IV when you want to do astrophotography or night photography on the coast, in the mountains or in cold regions. The heating elements are made of carbon fibers with improved heating performance, introduced for the fourth generation Vixen Lens Heater 360 IV. They efficiently keep the lens warm and fog-free with minimal power consumption. The heater temperature reaches 10 degrees Celsius above the ambient temperature (at 20 °C outside temperature and no wind). However, it varies according to influences in the environment. For power supply the lens heater is equipped with a detachable coiled cable (USB Type-C), up to 50 cm long. The 360 IV lens heater consumes only 2.5 W of power (5 V - 0.5 A). With a portable USB battery of e.g. 10,000 mA, it can operate continuously for about 14 hours (at 20 °C outdoor temperature). However, the operating time varies greatly depending on the environment and temperature. The soft and non-slip surface of the heating tape allows for easy attachment to the objective, eyepiece or telescope. The heater consists of a 30 mm wide and 600 mm long heating tape and is suitable for diameters up to 100 mm.FEATURESHeating type: carbon fiber textile heatingTemperature: 10 degrees Celsius above ambient outdoor temperature (at 20° C, no wind)Power source, power consumption: USB, 5 V, 0.5 A, 2.5 WPower cable: USB A (male)Connector: USB type C connector detachable coiled cable 20 to 50 cmOperating time: approximately 14 hours with fully charged 10,000 mAh battery (at 20 °C outdoor temperature)Recommended for lenses with a width of 30 mm and an outer diameter of 45 to 100 mmDimensions: 30 x 600 mmTotal weight: 67 gSCOPE OF DELIVERYLens Heater 360 IVUSB spiral cable
Universal mounting rail for mounting a photo camera on an EQ mount with Vixen GP mount for astrophotography. The EXPLORE SCIENTIFIC camera dovetail rail is made of die-cast aluminium. The dovetail-shaped mounting rail is 45 mm wide (similar to the Vixen dovetail style) and 280 mm long. The matt black anodized surface has a laser engraved scale on one side with a fine graduation with 2 mm increments. This makes it easier to determine the center of gravity when placing the camera on the mounting head. To protect the clamping surface there is a stainless steel clamping plate on the opposite side. The dovetail plate is equipped with rubber inserts at 3 positions. This allows a secure mounting of the camera equipment and prevents unintentional slipping and twisting. The mounting rail has a screw fastening with 1/4 inch photo thread, which is suitable for almost all commercially available camera systems. The screw attachment can be used in 3 different elongated hole positions to adjust a perfect balance. In addition, an adapter from 1/4 inch to 3/8 inch photo thread is also included, so that ball heads with the larger thread version can also be used directly. The camera mounting rail weighs only 250 grams. Suitable for all EXPLORE SCIENTIFIC and BRESSER mounts and also mounts of other brands that accept the popular Vixen-GP dovetail rail. FEATURES Universal camera mounting rail Dovetail with 45 mm
width Length 280mm; weight 250 grams Suitable for EQ mounts with Vixen GP dovetail Camera mounting screw with 1/4 inch photo thread Thread adapter 1/4 inch to 3/8 inch Laser engraved scale with 2 mm fine graduation Stainless steel clamping plate Rubber inserts against slipping and twisting 3 elongated holes for mounting the camera SCOPE OF DELIVERY Camera mounting rail Mounting screw 1/4 inch Thread adapter 3/8 inch
The laser-collimator makes aligning the mirrors of a Newtonian telescope simple, fast and precise. With the laser you collimate your optics even in the dark without additional accessories. Precisely machined it fits a 1,25" focuser without tilting. The built-in projection area enables collimating even long focal length scopes in a breeze. Suitable for Newtonian, Schmidt-Newtonian and Maksutov-Newtonian teleskopes.
FEATURES31.7mm(1.25") Eyepiece Barrel Diameter Machined anodized aluminum housing with all internal surfaces coated non-reflective flat blackBuilt in laser collimatableIMPORTANT: Laser products have to be kept out of reach of children!
The Vixen dew cap heater prevents your optics from fogging up due to dew.A must-have accessory for cold and damp nights.FEATURES
Consumption: 16.2 Ohm (12 V, 8.9 W)
Dimensions: 655 mm long heater with 2.2 m cable
Connection: 2.1 socket with medium-negative polarity
Weight: 120 g
DELIVERY CONTENT
Battery box
Vixen dew cap heater
Vixen Tube Clamp 115s for VSD90ss This high-quality tube clamp made in Japan is used to mount the VSD90ss f 5.5 astrograph. The base plate has M6 and M8 holes and can therefore be used on almost all mounts.FEATURES Supplied with various holes as standard High-quality CNC-milled aluminium tube clamp with non-slip locking screw Felt on the inside, prevents scratches on the VSD tube Threaded screw holes bottom: M8 holes x 2 (spacing 35 mm), M6 holes x 2 (spacing 35 mm) x 2 rows, 1/4-inch holes x 3 (inside 30 mm), 1/4-inch holes x 3 (interval 30 mm)
Threaded screw holes top: M8 holes x 2 (spacing 35 mm) x 2 sets, M6 holes x 2 (spacing 35 mm) x 2 rows, 1/4-inch hole x 1 in the centre, M4 holes x 2 (spacing 20 mm)
Dimensions: 162 × 71 × 155 mmSCOPE OF DELIVERY VSD tube clamp
7 kg counterweight for balancing the mount with heavy telescopesSuitable for AXD, AXD2 and AXJ mountsFEATURES
Counterweight for AXD/AXJ mounts
Weight: 7 kgDELIVERY CONTENT7 kg counterweightClamp screw
Dovetail adapter base for SXP2, AXJ and AXD mounts.Enables attachment of Vixen standard dovetail bars to the mount.Also suitable for Guide Mount XYFEATURESFor SXP2, AXJ and AXD mountsFor Vixen standard dovetail bars Weight: 220 gDELIVERY CONTENTDovetail adapter baseFixing and locking screwMounting screwsMounting tool
High-performance flattener and reducer set connection rings for Vixen telescopes SD81S, SD103S and SD115S, as well as the ED predecessor series.
High-performance flattener and reducer set
The kit consists of a high-performance flattener, a reducer for reducing the focal length, and connection rings (distance ring SD81, EX Tube 66), which were developed for prime-focus astrophotography with the SD81S, SD103S and SD115S telescopes.
The flattener and the 0.79x reducer deliver a significant increase in telescope performance and image quality.
You obtain a flat and sharp image until the edges, including with a full-frame DSLR camera.
Ultra-sharp image over the entire field of view of the DSLR full-frame sensor
The SD flattener improves the image quality to the edge of the field of view without changing the original focal length of the telescope.
The field of view of the DSLR camera with a full-frame sensor is fully illuminated (44 mm), ensuring that stars appear sharp until the edges of the image.
When used in conjunction with the Reducer HD, the focal length is reduced by a factor of 0.79 (f/7.7→6.1) whilst maintaining the 44 mm illumination.
High-contrast AS coating
The anti-reflex AS coating, which is also used on our high-end VSD 100 f/3.8 astrograph, delivers a high light transmission of 99.9% per lens surface. Loss of light, ghosting and scattered light images are virtually eliminated thanks to the completely matte interior coating.
FEATURES
Reduces the focal length by a factor of 0.79
Designed for full-frame cameras
High-contrast AS coating
Ultra-sharp image over the entire field of view
Designed for full-frame DSLR cameras
Illumination: 44 mm
Correct distance to chip: 63.5 mm
Designed for the SD81S, SD103S and SD115S
Also suitable for the ED81S, ED103S and ED 115S
DELIVERY CONTENT
SD Flattener HD
Reducer HD
Adapter ring for SD81
66 mm EX extension tube
Dust caps
£467.00*
Functional cookies are absolutely necessary for the functionality of the web shop. These cookies assign a unique random ID to your browser so that your unhindered shopping experience can be guaranteed over several page views.
Google Pay payments
Amazon Pay
Machine identifier:
Security token to identify the machine.
Machine identifier:
Security token to identify the machine.
Stripe orig props:
Stripe referrer information.
Stripe orig props:
Stripe referrer information.
Stripe orig props:
Stripe referrer information.
Stripe orig props:
Stripe referrer information.
Private machine identifier cookie:
Security token to identify the private machine.
Private machine identifier cookie:
Security token to identify the private machine.
Private machine identifier cookie:
Security token to identify the private machine.
Private machine identifier cookie:
Security token to identify the private machine.
Private machine identifier cookie:
Security token to identify the private machine.
Private machine identifier cookie:
Security token to identify the private machine.
Site auth:
Stripe authentication cookie.
Site auth:
Stripe authentication cookie.
Site auth:
Stripe authentication cookie.
Site auth:
Stripe authentication cookie.
Site auth:
Stripe authentication cookie.
Site auth:
Stripe authentication cookie.
Site auth:
Stripe authentication cookie.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
PayPal payments
Cookie settings:
The cookie is used to store the cookie settings of the site user over several browser sessions.
Information on origin:
The cookie stores the referrer and the first page visited by the user for further use.
Payment provider (Stripe) session
Timezone:
The cookie is used to provide the system with the user's current time zone.
CAPTCHA integration
Payment provider (Stripe) session
Stripe:
The cookie is used by the payment provider to increase security when processing payments on the website.
Cache handling:
The cookie is used to differentiate the cache for different scenarios and page users.
Session:
The session cookie stores your shopping data over several page views and is therefore essential for your personal shopping experience.
Payment provider (Stripe) fraud prevention
Payment provider (Stripe) fraud prevention
CSRF token:
The CSRF token cookie contributes to your security. It strengthens the security of forms against unwanted hacker attacks.
Google Tag Manager debug mode:
Allows to run the Google Tag Manager in debug mode.
Mollie Payment:
This cookie is used to group all events generated from a unique user session across multiple checkout pages.
Activated cookies:
Saves which cookies have already been accepted by the user for the first time.
YouTube video
Location maps:
We use OpenStreetMap as tile provider to show you visually the location of our stores and merchants.
Recently viewed products:
The cookie stores the most recently viewed products in order to suggest them on further product pages.
Wishlist
Customers also viewed:
The cookie stores the most recently viewed products in order to suggest them to other customers on product pages.
Cookies used for statistics and shop performance metrics.
Conversion and usertracking via Google Tag Manager
Google Tag Manager:
Cookie from Google to control the advanced script and event handling.
Google Analytics:
Cookie from Google for website analysis. Generates statistical data about how the visitor uses the website.
Tracking cookies help the shop operator to collect and evaluate information about the behaviour of users on their website.
Matomo Tracking:
Tracking statistics for the optimization of user workflows. No personal data is stored.
Matomo:
The cookie is used to track website activity. The information collected is used for site analysis and to generate statistics.
Google Analytics:
Google Analytics is used for traffic analysis of the website. Thereby statistics about website activities can be created and read out.
Marketing cookies are used to display advertisements on the website in a targeted and individualized manner across multiple page views and browser sessions.
Google Advertising
Google Ads:
Advertising Targeting
Google AdSense:
The cookie is used by Google AdSense to promote advertising efficiency on the website.
Facebook Pixel:
The cookie is used by Facebook to display personalized advertising offers based on user behavior to users of websites that integrate Facebook services.
Google conversion tracking:
The Google Conversion Tracking Cookie is used to track conversions on the website effectively. This information is used by the site operator to target Google AdWords campaigns.
We respect your privacy
This website uses cookies to ensure you get the best experience on our website... More information.