Skip to main content Skip to search Skip to main navigation

Vixen VSD90ss Astrograph

With BRESSER, you can enjoy a smooth introduction to the vast world of astronomy. Our detailed information ("Telescope Guide") provides valuable tips for beginners—but even experienced astronomers can use the information we provide (e.g., tables for the geographical latitude of all major world cities) as a reference.

Here is the table of contents of the comprehensive BRESSER Telescope Guide:

Sky Guides by Bresser

The Sky Guide provides comprehensive information on constellations, planetary positions, and astronomical events – perfect for planning your observations and delving deeper into astronomy.
Visit the guide directly here to make the most of your observations!

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Product and safety instructions


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • General safety instructions DANGER Risk of suffocation! Improper use of this product can result in suffocation, especially for children. Therefore, carefully observe the following safety instructions. Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a risk of suffocation! Keep cords, ribbons, and similar materials away from children! They could accidentally strangle themselves and suffocate! NOTE Risk of material damage! Improper handling can damage the device and/or accessories. Therefore, only use the device according to the following safety instructions. Do not dismantle the device! In the case of a defect, contact your dealer. They will contact the service center and may send the device in for repair.
  • Never look at the sun through an eyepiece/telescope without a certified protection filter. A moon filter can never be used for solar observation. The moon filter is only suitable for moon observation. The solar filter must be mounted in front of the telescope opening, not at the eyepiece. Otherwise, the concentrated light beam through the optics will immediately destroy the filter foil, leading to severe eye damage, including permanent blindness.
  • Never leave the optics unattended. Children and inexperienced adults could point the telescope at the sun without proper precautions and lose their eyesight.
  • Do not expose the device to high temperatures.
Skip product gallery

Accessories

%
Vixen Wide Photo Adapter 60DX for Nikon
The Wide Photo Adapter 60DX connects your Nikon DSLR camera to your telescope via a 60 mm thread. Thanks to the use of new materials and an improved design, Vixen was able to significantly improve the precision and load capacity compared with conventional adapters. The adapter's large interior diameter prevents shadows at the edges of the image when using a full-frame DSLR camera.FEATURESIncreased material strength for additional stability6 screws hold the camera in position (compared with 4 on most conventional adapters)Screw tips with Delrin inserts prevents the camera from tilting and minimizes distortion.Large interior diameter prevents shadowingBlack interior prevents scattered lightCompatible with 60 mm accessories when the camera adapter is removed2 screw sets (L and S) prevent scratches on the camera housing2 screw sets for adjusting the rotation resistanceDELIVERY CONTENTVixen Wide Photo Adapter 60DX for Nikon cameras2 screw sets (L and S)

Available

£127.00* £159.00* (20.13% saved)
Vixen universal T2 focal adapter, 60 mm
​This Vixen focal adapter connects your DSLR or other camera to your telescope with a 60 mm thread.The large interior diameter of the adapter prevents vignetting at the edges of full-frame camera sensors.The focal adapter can be rotated so that the image field can be perfectly framed.This rotational adjustment is facilitated via 3 locking screws, ensuring a firm lock.Note: Vixen T2 ring is also required for your brand of camera.In this case, the inner ring of the T2 adapter is removed and clamped in place with three small grub screws.PROPERTIESConnects your DSLR camera to your telescopePrevents shadowingDimensions: 72 mm x 20 mmWeight: 55 gWHAT'S INCLUDEDFocal adapter universal 60 mmAssembly tool

Available

£50.00*
Vixen 60DA Focal adaptor for Canon EOS Cameras
Vixen 60DX Focal adaptor for Canon EOS Cameras This Vixen 60DX is a photographic adaptor for Canon EOS cameras, for use with telescopes with a 60 mm focuser drawtube connection thread. A redesign by Vixen uses new tougher materials for a more solid connection and also offers an accurate, well-machined camera rotator ring, in order to help frame your images perfectly. Camera-Adaptor for Canon EOS with 60mm Focuser connection thread Large inner diameter for full-format cameras, helping to minimise vignetting 6 locking 60° spaced bolts to hold the camera’s rotation in position Dimensions: 81mm x 30 mm / weight: 190g The option of using 6 long or 6 short fixing screws for the rotator The Vixen 60DA Focal adaptor connects your Canon EOS DSLR Camera to a telescope with an appropriate 60 mm Focuser Drawtube Thread. Thanks to the use of new materials and an improved design Vixen was able to considerably uprate both precision and durability, when compared to conventional rotational camera adaptors. Two sets of rotational locking bolts (Long and Short) are supplied. The longer ones are knurled and easy to turn by hand. The shorter options help to prevent marring of the camera casing, when using certain designs of camera and are also much less easy to turn by hand, increasing security if you need the camera locked in a particular rotational position for longer periods. The large inner dimension of this adaptor prevents vignetting at the edges of the image when using full frame DSLR cameras. Canon EOS-Bayonet fastener made of hardwearing brass, for years of hassle-free use. Increased material quality over conventional adapters provides more stability in use. 6 fixing bolts hold the camera in rotational position for increased sturdiness (standard rotators often only use 4, or less). FEATURES Screw tips with Delrin-tips prevent tilting of the camera and subsequent image distortion. Large inner diameter prevents vignetting. Inner blackening suppresses scattered light. Compatible with 60 mm accessories, when the camera adaptor is taken off. Two rotational bolt sets (Long and Short) are supplied. SCOPE OF DELIVERY 60DA Focal adaptor 6 long and 6 short fixing screws

Available

£139.00*
%
Vixen focal adapter for Canon EOS
The Vixen focal adapter can be used to connect your DSLR camera to your telescope via a 60-mm thread. The large internal diameter of the adapter prevents shadows at the edges of the image when using a full-frame DSLR camera. The focal adapter can also be rotated to rotate the field of view selection. Three locking screws are provided for clamping.Note: Vixen T2 ring also required for your Canon. In this case, the inner ring is removed from the T2 adapter and clamped using three small grub screws.FEATURES60-mm connection thread for OAZWeight: 56 gT-ring for Canon EOS also requiredPACKAGE CONTENTSVixen focal adapter for Canon EOS

Available

£43.00* £54.00* (20.37% saved)
Vixen M56 filter adapter for M48mm and M52mm filter thread
This adapter ring enables you to take colour and nebula filters with M48 and M52 thread.The M56 thread of the filter adapter is screwed into the Wide Photo Adapter AD 60DX, for example, and then offers an adaptation to M52 and M48 filter threads for various nebula filters for photography. The adapter has each one 48 mm and 52 mm thread. The adapter ring can be used on the Wide Photo Adapter 60DX, Wide Photo Adapter 60 mm, 60 mm ring with T-thread adapter or the EA60mm up to 50.8mm.The adapter ring can be used on the telescopes A81M, A105M II, SD81S, SD115S, AX103S, FL55SS, VC200L, VMC200L, VMC260Lin combination with the optionally available adapters described above.IMPORTANT NOTE: The Corrector PH, the Extender PH and the Coma Corrector 3 cannot be used with this Adater when used with the R200SS OTA in combination with the EA 60mm to 50.8mm.FEATURESInternal thread M48 (diameter 48 mm, thread pitch = 0.75 mm)Internal thread M52 (diameter 52 mm, thread pitch = 0.75 mm)External thread M56 (diameter 56 mm, thread pitch = 0.75 mm)Applicable adapters: Wide Photo AD 60DX, Wide Photo AD 60 mm, 60 mm ring with T-thread AD, EA60 mm to 50.8 mmDimensions: 56 x 7 mmWeight: 7gMade in JapanSCOPE OF DELIVERYFilter adapter for M48mm and M52mm filter thread

Currently not available

£51.00*
Vixen T-ring for Canon EOS
T-rings are used as a connecting piece between the camera adapter and the camera. Please note that each camera type requires a different T-ring.FEATURESVixen T-ring for Canon EOS camerasConnects a camera adapter to the cameraFor microscopes, telescopes and T2 lensesWeight: 52 gPACKAGE CONTENTSVixen T-ring for Canon EOS

Available

£28.00*
%
Vixen T2 ring for Nikon
T2 rings are used as a connecting piece between the camera adapter and the camera. Please note that each camera type requires a different T-ring.FEATUREST2 adapter ring for Nikon camerasAdapts the camera to telescopes and microscopesWeight: 22 gPACKAGE CONTENTSVixen T2 ring for Nikon

Available

£22.00* £28.00* (21.43% saved)
%
Vixen T-Ring for Sony E Cameras
This T2 ring allows you to use your Sony camera on a telescope or microscope with a T2 thread.Depending on the mode, you may require an additional camera adapter.FEATUREST-2 ring for connecting an SLR cameraDesigned for Sony EWeight: 113 gDELIVERY CONTENTT-2 Ring Sony E

Available

£44.00* £55.00* (20% saved)
%
Vixen T-Ring - Sony (Konica-Minolta-Sony Alpha)
Connects a Four Thirds camera to your telescope or microscope.A camera adapter is required for this purposeWeight: 58 gDELIVERY CONTENTVixen T-ring - Four Thirds

Available

£22.00* £28.00* (21.43% saved)
Vixen Micro 4/3 T-ring
T-rings are used as a connecting piece between the camera adapter and the camera. Please note that each camera type requires a different T-ring.FEATURESMicro 4/3 T-ringFor telescopes and microscopesWeight: 110 gPACKAGE CONTENTSMicro 4/3 T-ring

Available

£51.00*
Vixen Tube Clamp 115s for VSD90ss
Vixen Tube Clamp 115s for VSD90ss This high-quality tube clamp made in Japan is used to mount the VSD90ss f 5.5 astrograph. The base plate has M6 and M8 holes and can therefore be used on almost all mounts.FEATURES Supplied with various holes as standard High-quality CNC-milled aluminium tube clamp with non-slip locking screw Felt on the inside, prevents scratches on the VSD tube Threaded screw holes bottom: M8 holes x 2 (spacing 35 mm), M6 holes x 2 (spacing 35 mm) x 2 rows, 1/4-inch holes x 3 (inside 30 mm), 1/4-inch holes x 3 (interval 30 mm) Threaded screw holes top: M8 holes x 2 (spacing 35 mm) x 2 sets, M6 holes x 2 (spacing 35 mm) x 2 rows, 1/4-inch hole x 1 in the centre, M4 holes x 2 (spacing 20 mm) Dimensions: 162 × 71 × 155 mmSCOPE OF DELIVERY VSD tube clamp

Available

£233.00*
Vixen VSD90SS transport case
Special transport case for the VSD90SS astrographThis is a hard-shell case that was developed exclusively for the VSD90SS. You can store the VSD90SS tube either without the tube clamp or with the tube clamp attached. When the VSD90SS is stored in the case, there is enough space around the focuser to store accessories for photography.The inside of the case is designed so that the VSD90SS can be used as soon as it is removed from the case. You can store not only the tube of the VSD90SS, but also the tube clamp. There is enough space for accessories on the side of the case facing the eyepiece to make it easier to keep them handy at the observation site. For example, the reducer V0.79x, wide-angle photo adapter 60DX or an electric focuser from ZWO can be stored.The housing of the case is made of lightweight and hard-wearing Plapearl material. The flexible properties of Plapearl allow for a special construction that reduces the weight by more than 30 % compared to an equivalent aluminium case. Thanks to the seamless construction, with the exception of the opening, the housing is also extremely airtight. Plapearl is lightweight, durable, has excellent flexural rigidity and is easy to recover from impact.FEATURESCase material: PlapearlDimensions: 556 x 245 x 256 mmWeight: 2.4 kgSCOPE OF DELIVERYVSD90SS transport caseCustom-fit padding insertsKey 2x

Currently not available

£373.00*
Vixen Dual-Speed-Focuser
​The 1: 7 reduction enables very fine focusing of targets.An indispensable accessory, especially in astrophotography.The reduction can be retrofitted on the following telescopes:A80M, A105M, NA140SSf, ED81S, ED103S, ED115S, AX103S, VC200L, VMC200L and R200SSCannot be used on old devices from the 90s with plastic focusing knobs - in these cases, it is also necessary to swap the focus spindle (please contact us for details).PROPERTIESAllows very fine focusingIndispensable in astrophotographyCan be retrofitted to many Vixen telescopesReduced to 7:1Weight: 170 gWHAT'S INCLUDEDDual Speed KnobAssembly tool

Available

£192.00*
Vixen Dual Slide Dovetail Bar
Universal dovetail bar for Vixen and ARCA-SWISS standard clampsThe Vixen Dual Slide Dovetail Bar can be attached to mounts with the Vixen dovetail standard as well as to narrow profiles such as the popular ARCA-SWISS standard. This rail is therefore not only suitable for mounts but can also be used on many items from the photo accessories range. With the optional quick-release fastener (item No.: X035438 - Vixen Dovetail adapter with quick-release fastener) the rail can also be attached to a camera tripod. With the optional quick-release panorama clamp (item No.: X000096 - Vixen Quick Release Panorama Plate) and an additional counterweight rod, you can, for example, attach a telephoto lens to the POLARIE U. A spotting scope can also be attached quickly and securely to an astronomical mount.FEATURES    Screw connection holes: 1/4 inch thread 3x, 3/8 inch thread 1x, M6 thread 4x lateral    Compatibility: Vixen and ARCA-SWISS standard    Material: Aluminum    Dimensions: 182 x 42 x 15 mm    Weight: 178 gSCOPE OF DELIVERY    Vixen Dual Slide Dovetail Bar

Available

£46.00*
Vixen M54 Adapter Ring
M54 Adapter Ring for adapting to 54 mm accessories (for use with the 60 mm to M48 camera adapter)Replace the inner ring of the 60 mm to M48 camera adapter (optional) to attach cameras or accessories with a 54 mm internal thread (M54 × 0.75). Ideal for full-frame CMOS cameras: When shooting with a full-frame sensor or a CMOS camera, the larger diameter helps minimise vignetting.With the optional M56 Filter Conversion Adapter 48/52, you can use standard 48 mm / 52 mm photographic filters. Note:When using the M56 Filter Conversion Adapter 48/52, the PH corrector, PH extender, Coma Corrector 3 and SDP Reducer cannot be used.  FEATURES Telescope-side connection (female): M56 × 0.75 (for filter mount/adapter ring) Camera-side connection (male): M54 × 0.75 Compatible with: 60 mm to M48 camera adapter Not usable with: Wide Photo Adapter 60DX and Wide Photo Adapter 60 mm Dimensions: Ø 68 × 12 mm Weight: 23 g SCOPE OF DELIVERY Vixen M54 Adapter Ring

Currently not available

£39.00*
Vixen Camera Adapter 60 mm to M48
The Vixen 60 mm to M48 camera adapter is used to mount an astronomical CMOS camera to Vixen telescopes with a 60 mm focuser. The adapter is suitable for cameras or accessories with an M48 × 0.75 internal thread. You can directly connect third-party CMOS cameras and other products with an M48 thread. (Depending on the CMOS camera, an extension tube (optional) may be required.) The adapter can be freely rotated by loosening the clamping screws to orient the image as desired. Using the optional M56 Filter Conversion Adapter 48/52, you can attach 48 mm / 52 mm third-party photographic filters. Note:When using the M56 Filter Conversion Adapter 48/52, the PH corrector, PH extender, Coma Corrector 3 and SDP Reducer cannot be used.  FEATURES Camera adapter: 60 mm to M48 Telescope side connection: 60 mm, P = 0.75 mm Accessory side (internal): M56 × 0.75 (female) Camera side (internal): M48 × 0.75 (female) Adapter: rotatable SCOPE OF DELIVERY 60 mm to M48 camera adapter

Currently not available

£98.00*
Skip product gallery

Customers also bought

Vixen VSD90SS transport case
Special transport case for the VSD90SS astrographThis is a hard-shell case that was developed exclusively for the VSD90SS. You can store the VSD90SS tube either without the tube clamp or with the tube clamp attached. When the VSD90SS is stored in the case, there is enough space around the focuser to store accessories for photography.The inside of the case is designed so that the VSD90SS can be used as soon as it is removed from the case. You can store not only the tube of the VSD90SS, but also the tube clamp. There is enough space for accessories on the side of the case facing the eyepiece to make it easier to keep them handy at the observation site. For example, the reducer V0.79x, wide-angle photo adapter 60DX or an electric focuser from ZWO can be stored.The housing of the case is made of lightweight and hard-wearing Plapearl material. The flexible properties of Plapearl allow for a special construction that reduces the weight by more than 30 % compared to an equivalent aluminium case. Thanks to the seamless construction, with the exception of the opening, the housing is also extremely airtight. Plapearl is lightweight, durable, has excellent flexural rigidity and is easy to recover from impact.FEATURESCase material: PlapearlDimensions: 556 x 245 x 256 mmWeight: 2.4 kgSCOPE OF DELIVERYVSD90SS transport caseCustom-fit padding insertsKey 2x

Currently not available

£373.00*
%
Vixen Wide Photo Adapter 60DX for Nikon
The Wide Photo Adapter 60DX connects your Nikon DSLR camera to your telescope via a 60 mm thread. Thanks to the use of new materials and an improved design, Vixen was able to significantly improve the precision and load capacity compared with conventional adapters. The adapter's large interior diameter prevents shadows at the edges of the image when using a full-frame DSLR camera.FEATURESIncreased material strength for additional stability6 screws hold the camera in position (compared with 4 on most conventional adapters)Screw tips with Delrin inserts prevents the camera from tilting and minimizes distortion.Large interior diameter prevents shadowingBlack interior prevents scattered lightCompatible with 60 mm accessories when the camera adapter is removed2 screw sets (L and S) prevent scratches on the camera housing2 screw sets for adjusting the rotation resistanceDELIVERY CONTENTVixen Wide Photo Adapter 60DX for Nikon cameras2 screw sets (L and S)

Available

£127.00* £159.00* (20.13% saved)
Vixen Dual-Speed-Focuser
​The 1: 7 reduction enables very fine focusing of targets.An indispensable accessory, especially in astrophotography.The reduction can be retrofitted on the following telescopes:A80M, A105M, NA140SSf, ED81S, ED103S, ED115S, AX103S, VC200L, VMC200L and R200SSCannot be used on old devices from the 90s with plastic focusing knobs - in these cases, it is also necessary to swap the focus spindle (please contact us for details).PROPERTIESAllows very fine focusingIndispensable in astrophotographyCan be retrofitted to many Vixen telescopesReduced to 7:1Weight: 170 gWHAT'S INCLUDEDDual Speed KnobAssembly tool

Available

£192.00*
Vixen Tube Clamp 115s for VSD90ss
Vixen Tube Clamp 115s for VSD90ss This high-quality tube clamp made in Japan is used to mount the VSD90ss f 5.5 astrograph. The base plate has M6 and M8 holes and can therefore be used on almost all mounts.FEATURES Supplied with various holes as standard High-quality CNC-milled aluminium tube clamp with non-slip locking screw Felt on the inside, prevents scratches on the VSD tube Threaded screw holes bottom: M8 holes x 2 (spacing 35 mm), M6 holes x 2 (spacing 35 mm) x 2 rows, 1/4-inch holes x 3 (inside 30 mm), 1/4-inch holes x 3 (interval 30 mm) Threaded screw holes top: M8 holes x 2 (spacing 35 mm) x 2 sets, M6 holes x 2 (spacing 35 mm) x 2 rows, 1/4-inch hole x 1 in the centre, M4 holes x 2 (spacing 20 mm) Dimensions: 162 × 71 × 155 mmSCOPE OF DELIVERY VSD tube clamp

Available

£233.00*
Skip product gallery

Customers also viewed

VMC 260L Maksutov Cassegrain AXD Version
The optics of the VMC260L surpass the traditional Schmidt-Cassegrain and this tube is only 650 mm in length, despite its long focal length of 3000 mm . With its large aperture of 260 mm , the telescope collects light for serious professional observations and photography of the planets, as well as countless deep-sky objects. The dielectrically coated mirrors of the VMV260L guarantee high sharpness and maximum brightness. Thanks to the open tube, this instrument cools down faster than conventional closed Cassegrain systems, and (having no front corrector plate) is not as prone to dewing issues either.An optional 0.62x focal reducer is available for expansion to reduce the focal ratio to 1: 7.1. This results in a shortening of the exposure times and the increasing the field of view, thus increasing the ability to photograph larger objects in the sky. Included accessories feature a finder, dovetail rail and a handle that assists considerably when mounting and de-mounting the scope and can also be used as a camera holder for star field recordings.CHARACTERISTICSAperture: 260 mm precision spherical mirror, multi-coatedLight gathering power: 1380xAdapter and connections: 60 mm on the focuser; 42 mm for T-mount and 31.7 mm with folding mirror; 50.8mm optionPhotography: primary focus and eyepiece projectionWHAT'S INCLUDEDVMC260L reflectorDovetail rail (3 inch for AXD)AXD SaddleplateCarrying handleFinderscope 7x50Flip mirror

Available

£4,749.00*