Vixen universal T2 focal adapter, 60 mm

The Wide Photo Adapter 60DX connects your Nikon DSLR camera to your telescope via a 60 mm thread. Thanks to the use of new materials and an improved design, Vixen was able to significantly improve the precision and load capacity compared with conventional adapters. The adapter's large interior diameter prevents shadows at the edges of the image when using a full-frame DSLR camera.FEATURESIncreased material strength for additional stability6 screws hold the camera in position (compared with 4 on most conventional adapters)Screw tips with Delrin inserts prevents the camera from tilting and minimizes distortion.Large interior diameter prevents shadowingBlack interior prevents scattered lightCompatible with 60 mm accessories when the camera adapter is removed2 screw sets (L and S) prevent scratches on the camera housing2 screw sets for adjusting the rotation resistanceDELIVERY CONTENTVixen Wide Photo Adapter 60DX for Nikon cameras2 screw sets (L and S)

Complete Telescope Set SXD2WL AX103S with Wifi-GoTo Mount, Tripod, and Eyepieces This high-quality apochromatic refractor telescope set impresses with its intricate 103mm Triplet ED lens construction. The telescope is made in Japan and stands out for its excellent workmanship, sharpness, and contrast performance. The advantage of this APO refractor lies in its short build length and the completely corrected, edge-sharp optics. The AX103S is a top-class ED apochromat in the refractor range. It offers a Triplet ED lens and, in the rear area, a field flattener lens. The f8.0 refractor is equipped with a central ED lens in the objective and reduces chromatic aberration to an absolute minimum. An optional focal reducer can decrease the aperture ratio to 1:5.6 to achieve quicker results in astrophotography. The Vixen telescope belongs to the new Generation II with improved temperature-resistant lens cell. The integrated field flattener lens ensures a sharp image right to the edge of the field of view, which is very important in astrophotography. The AX103S is specifically developed for photographic purposes, but also visually a real highlight, especially for observing the moon and planets. You will be thrilled when you observe the moon's surface with its craters or Saturn with its ring system. On Jupiter, on a good night, the two bright cloud bands and many smaller details will be visible, as well as the great red spot on the planet. On moonless nights, you can observe the Andromeda Nebula, Orion Nebula, Eagle Nebula, Lagoon Nebula, and many other interesting objects. But even weaker celestial objects become visible with this large aperture under a good sky. This telescope set “Made in Japan” simply leaves no wishes unfulfilled. The AX103S is corrected up to full-frame photography and delivers razor-sharp images right into the corners of the image field. The large 60mm eyepiece drawtube also allows for attaching heavy cameras without tilting. Furthermore, the supplied flip mirror enables comfortable observing even in challenging viewing situations and additionally offers a T2 thread for connecting a DSLR camera. Thus, you can observe in straight view or at a 90° angle. The carrying handle attached to the tube clamps ensures a safe transport of the telescope. The dew cap can be retracted for transport or storage. The sturdy metal tripod allows for vibration-free mounting of the telescope and mount even in windy weather. The SXD2WL mount is simply operated via a Wifi module with a smartphone or tablet. For user-friendly control of the mount, the free STAR BOOK Wireless app is available. This allows you to use practical features of celestial navigation such as automatic GoTo slewing to specific celestial objects very easily via your smartphone or tablet. As the power consumption of the conventional LCD screen (STAR BOOK TEN) is eliminated, the power consumption of the mount is reduced by up to 20%. Thus, astronomical observations and astrophotography are possible over longer periods. By tapping the desired celestial object from a list, it is automatically slewed into the telescope's field of view and tracking begins. An existing STAR BOOK TEN control can also be used on this mount without any problems. Equipped with the same precision stepper motors as the flagship model, the AXD mount, the SXD2WL brings a new standard of performance and precision into the Vixen mount family. The axis cross of the mount has a photographic carrying capacity of 15 kg for only 9.2 kg and is thus excellently suited for mobile observations. In addition, the motors located in the lower part of the mount also serve as a counterweight. This means the mount needs fewer weights for balancing. The SXD2 Mount in Detail Precision stepper motors and Micro-Step Motion Control System The heart of the SXD2 are the precision stepper motors, which offer better performance and response than previous models. The Micro-Step Motion Control System is characterised by powerful yet very quiet drive properties, both in fine movements and in fast slews. Built-in bearings The bearings of the RA and DEC axes and the worm shafts have been significantly improved to reduce the load on the motors. This allows the motors to move much more quietly than in previous models. High-precision worm gears High-precision manufacturing technologies eliminate errors in the worm gears. The edges of both worms and worm gears are particularly smooth, allowing for very precise tracking. Declination axis as counterweight The massive motor units are built into the lower part of the declination axis, so that the centre of gravity of the SXD2 is below the intersection point of the RA and DEC axes. This means you need fewer additional counterweights. Latitude adjustment The latitude is adjustable between 0 and 70 degrees (divided into 3 zones and adjustable +/- 15 degrees per zone, for high, medium, and low latitudes); latitude scale in 2-degree steps; fine adjustment with a tangent screw head, approx. 0.8 degrees per rotation. Built-in PFL-II polar finder with illumination The built-in 5x20mm polar finder with 10° field of view features a 3-star alignment system. This eliminates the need to set date and time. The illuminated reticle with variable brightness and automatic shutdown is adjustable in 8 stages and illuminated in red. The adjustment accuracy is 3 arc minutes. The Wireless Module in Detail The Vixen Wifi adapter for EQ mounts allows you to control your Vixen mount via a smartphone or tablet. With the smartphone app STAR BOOK Wireless (free), you can perform celestial navigation without any wiring. Thus, the app instantly transforms your mobile device into a control for the equatorial mount. The response delay of the mount, considered the biggest disadvantage of wireless connections, has been reduced to a level comparable to wired solutions. Reduced power consumption compared to conventional controls with LCD monitor The power consumption of the mount is reduced by up to 20% and thus allows longer observations than with conventional wired controls like the STAR BOOK TEN. Operation similar to STAR BOOK TEN control The STAR BOOK Wireless app is designed similarly to what you already know from the STAR BOOK TEN control. It contains up to 259,000 celestial objects depending on the star chart settings. Tap a celestial object in the object list and start the GoTo. The mount now automatically moves to this target and brings it into the field of view of the telescope. All popular features of the STAR BOOK TEN remain available. Convenient operation While looking through the telescope, you control the mount by swiping on the star chart of the app. Since there are no buttons, you simply slide your finger over the star chart, allowing you to conveniently operate the mount. Extensive astronomical data included This includes data on easily observable celestial bodies such as Messier objects, NGC objects, IC objects, as well as the sun, moon, planets, comets, and dwarf planets. High-precision alignment Alignment on one or two stars already gives you quite an accurate positioning of the mount. By aligning with three or more stars, a very precise alignment of the mount for high magnifications can be carried out. The objects are then positioned exactly and centrally in the field of view of your telescope. The alignment information is saved and can also be retained when the device is turned off. By leaving the telescope in its current state after an observation, without moving it, you can start the automatic installation with the same settings during the next observation. Individual Adjustment Options The app offers various individual settings such as gear backlash compensation, red night mode, autoguider, variable GoTo speed, and LED brightness, just like the STAR BOOK TEN control. You can also set the timing of the objective tube reversal (Meridian Flip) according to your wishes. Even if the object moves south during tracking, you can prevent the telescope tube from reversing. Important Information Not usable on old SX mounts with the old blue Star Book Technical Information on the Wifi Module CPU with 32-bit CISC processor 120 MHz The unit is connected to the mount with a D-SUB 9PIN connector as with the STAR BOOK TEN. It has a 6-pin 6-wire modular connector for external autoguider operation. Supported operating systems are Android 6 or higher, iOS 9.0 or higher, WLAN standard: IEEE 802.11b/g/n FEATURES AX102S Apochromatic Refractor Optimised for full-frame photography 103 mm aperture, 825 mm focal length, f8.0 Resolving power: 1.13 Visual limiting magnitude: 11.8 Fully coated Triplet ED lens with flattener Very high sharpness and contrast Optional reducer available Backfocus without reducer: 150.0 mm Backfocus with reducer: 63.5 mm SXD2WL Mount RA gear ring: 180 teeth DEC gear ring: 180 teeth Axis material and diameter: Carbon steel / Dec. 35 mm, RA 40 mm Polar finder telescope: 6x20 mm, PFL-II polar finder Height fine adjustment: 0° to 70°, (fine adjustment +/- 15°, height) Counterweight bar: 20 mm diameter Azimuth adjustment: Worm gear fine adjustment Power supply: DC12 V; 0.4~1.7 A Maximum payload: 15 kg, photographic, without counterweight Counterweights: 1x 1.9 kg and 1x 3.7 kg Tripod connection: 45 mm pin Dimensions: 36 cm (H) x 12 cm (W) x 36 cm (L) Weight: 8.8 kg (19.4 lb), without counterweight 32-bit CISC processor 120 MHz Operating system: Android 6 or higher, iOS 9.0 or higher Connection: D-SUB 9PIN connector Autoguider input ST4 Power consumption SXD2WL+Wireless unit: DC12V / 0.3–2.0 A (load 10 kg), 0.4–2.2 A (load 15 kg)SCOPE OF DELIVERY SXD2WL Mount Wireless Unit Counterweight: 1.9 kg and 3.7 kg Illuminated polar finder telescope Mounting tools Car lighter cable AX103S Apochromatic Refractor Flip mirror 2 eyepieces (SLV 20, SLV 5) Tube clamps Dovetail plate 7x50 finder, illuminated SXG Aluminium tripod

High-performance, top-of-the-range fluorite apochromat for mobile astrophotography and observers. Thanks to its small size and lightweight design, this high-quality fluorite refractor is ideal for excursions and air travel. It displays razor sharp and bright stars across the entire field of view of the full-frame image sensor (95% illumination with 44 mm image circle). The FL55SSS turns into a fast F/4.3 astrograph with the optional flattener and focal reducer. It allows you to use extremely short exposure times and a provides a large field of view for large nebulae or comets.Note: To achieve the optimum image quality of the FL55ss, we strongly recommend the purchase of this reducer and flattener set.Despite the small aperture, the FL55SS features a high-resolution HR eyepiece that produces stunningly clear images of the moon and the bright planets. When used for astrophotography, it delivers razor-sharp images of stars that are guaranteed to impress. FEATURES Objective lenses: 55 mm fluorite Focal length: 300 mm F5.5 Resolution and limiting magnitude: 2.11, 10.5 Light-gathering power: 62x Dimensions and weight: 80 x 282 mm; 1.5 kg Adapter and connections: 31.7 mm receptacle, 60 mm thread WHAT’S INCLUDED 55 mm optical tube with fluorite APO Dovetail adapter Extension Tube 60 mmDew cap Dust covers

The SLV eyepieces with high-quality lanthanum glass provide remarkably clear and high-contrast images of the night sky right to the edge of the field of view. The lanthanum elements almost completely eliminate chromatic aberration, producing a colour-neutral image right up to the edges. The lenses are also fully multi-coated for high light transmission. The eyecup can be twisted up and down, making the eyepiece suitable for glasses wearers. The large exit pupil distance of 20 mm means that the eye does not become fatigued during longer periods of use, and the entire field of view can be seen clearly even when wearing glasses. The eyepiece also features a standard 1.25" filter thread for colour and nebula filters. In addition, the insides of the eyepiece sleeves are fully blackened to reduce distracting reflections. FEATURES Very high contrast and sharpness over the entire field of view Comfortable interpupillary distance of 20 mm Lanthanum glass almost completely eliminates chromatic aberration 31.7 mm eyepiece barrel 1.25" filter thread Full multi-layered coating Eyecup can be twisted down for glasses wearers Weight: 173 g PACKAGE CONTENTS Vixen SLV 50° eyepiece Dust caps

Connects a Four Thirds camera to your telescope or microscope.A camera adapter is required for this purposeWeight: 58 gDELIVERY CONTENTVixen T-ring - Four Thirds

The perfect LED head torch for nighttime observations! Adjusting your eyes to the dark surroundings is very important when making astronomical observations. In dark areas, it is very difficult to use astronomical equipment without a suitable light. With normal lights, however, the light intensity is more important than protecting your eyes against bright light. Using these lights at night makes your pupils contract, which can make it difficult for your eyes to readjust to the darkness. The SG-L01, our first astronomy LED lamp, featured a built-in red LED that provided a solution to this problem. However, the red light did not offer optimal visibility. On our new astronomy LED light, the SG-L02, the LED lights produce warm light to improve visibility. They also ensure that your eyes stay adapted to the dark. The LEDs do not emit light in the sensitive range of 555 nm. The brightness of the white light can be adjusted between 3 and 42 lumen, while the red light can be adjusted between 0.28 and 7.62 lumen. FEATURES Dimmable red light ensures that your eyes stay adapted to the dark Built-in rechargeable battery, charges via USB Waterproof design LED colour can be switched from red to white 0.28 to 7.62 lumen for red light 3 to 42 lumen for white light Dimensions: 41 mm x 33 mm x 30 mm Weight: 29 g DELIVERY CONTENT SG-L02 head torch Strap (size S) Strap (size L) Pocket clip Cable for charging the battery (USB-A plug to USB Micro-B plug)