Vixen SXG-HAL130 Aluminum Tripod for GP, SX & AP Mounts

The Vixen rigid Accessory Tray for HAL130 and Porta II Tripods offers practical storage space for eyepieces and various accessories.It also improves the overall stability of the tripod.The tray can be used on the HAL130 and SXG HAL 130 for GP and SX, as well as on the Porta II tripod.PROPERTIESFor eyepieces and various accessoriesIncreases the stability of the tripodsCan be used on HAL130, SXG HAL 130 and Porta tripodsWHAT'S INCLUDEDTray for tripodsScrew set 

This plate is designed for large binoculars with 1/4’’ photo thread screws. It is inserted into the HF2 fork mount. The maximum width of the binoculars must be 251mm in order for them to be mounted. FEATURES Mounting plate for large binoculars and BT series Weight: 1 kg WHAT’S INCLUDED Mounting plate for large binoculars 1/4’’ photo thread screw

For balancing the Polarie Star Tracker in connection with the counterweight bar. The counterweight of 1.0 kg is also compatible with GP, SX mounts and mounts with 20 mm counterweight bar PROPERTIES Suitable for Polarie Star Tracker, GP, SX and AP mount For counterweight rods with a diameter of 20 mm Weight: 1.0 kg WHAT'S INCLUDED Weight: 1.0 kg Locking Bolt

SPEZIAL ASTRO binoculars from BRESSER are ideal for astronomy and landscape observation. This is a professional large binocular with ED glass objective lenses for the very highest demands on color fidelity and brilliance. With the best viewing characteristics, a robust marine version and a sturdy tripod adapter. Thanks to fully multi coated Bak-4 glass material, the extra large objective lens diameter and highly corrected eyepieces with 5 lenses in 3 groups these binoculars provide bright, crisp images from edge to edge. The high 20x magnification it is convenient not only for observing astronomical objects but is also practical for viewing distant terrestrial objects. Due to a very high reduction of stray light, the binoculars deliver the best possible picture and a perfect sight. With the individual eyepiece focus once set you can get a sharp image for all astronomical distances. Foldable rubber eyecups give eye glass wearers the possibility of making the best use of these optics’ field of view. The binoculars are waterproof and ARGON gas filled to avoid internal fogging. The ergonomic rubber armouring provides a good grip and is also protected against shocks. With the included heavy duty foto tripod adapter the SPEZIAL ASTRO ED can be mounted onto any foto tripod which offers a standard 1/4inch or 3/8inch thread. The use of a tripod is also highly recommended at a high magnification of 20x to obtain a steady image. FEATURES Binoculars for astronomical and landscape observations Extremly high light gathering capacity  High magnification for for distant objects Fully multi coated optics Waterproof and ARGON gas filled against fogging Magnification: 15x / objective lens diameter: 70mm Individual eyepiece focus and foldable rubber eyecups Highly corrected eyepieces for crisp images from edge to edge Ergonomic rubber armouring - protected against shocks Dimensions: 310x250x100mm / weight: 2700g Heavy duty foto tripod adapter included SCOPE OF DELIVERY Binocular Photo tripod adapter Neckstrap Dust covers CaseInstruction manual

Vixen has developed a new generation of SX mounts for demanding observers and astrophotographers. The SX2WL mount is simply operated via a Wifi module with a smartphone or tablet. By controlling the mount with your smartphone using the free STAR BOOK Wireless app, you can easily use sky navigation functions such as automatic GoTo panning of celestial objects via your smartphone or tablet. By eliminating the power consumption of the conventional LCD (STAR BOOK TEN), the power consumption on the mount is reduced by up to 20%, thus enabling longer astronomical observation and astrophotography. When the desired celestial object is selected from a list, it is automatically panned into the telescope's field of view and tracking begins.An existing STAR BOOK TEN controller can also be used on this mount without any problems. Equipped with the same precision stepper motors as the top model, the AXD mount, the SXD2WL brings a new standard of performance and precision to the Vixen mount family. With a photographic load capacity of 12 kg, the axis cross of the mount weighs just 7.0 kg (15.4 lbs) making it ideal for mobile observations.In addition, the motors mounted in the lower part of the mount also serve as a counterweight, so the mount requires fewer weights for balancing. The SX2 mount in detail Precision stepper motors and micro-step motion control systemAt the heart of the SXD2 are the precision stepper motors, which offer better performance and response than previous models. The micro-step motion control system offers powerful and yet very smooth drive characteristics, which are given both in fine movements and in fast pans. Built-in bearings The bearings of the RA and DEC axes and the worm shafts have been significantly improved to reduce the load on the motors. As a result, the motors move much more smoothly than in previous models. High-precision worm gearsHigh-precision processing technologies eliminate worm gear errors. The edges of the two worms and worm wheels are particularly smooth, enabling very precise tracking. Declination axis as counterweightThe solid motor units are installed in the lower part of the declination axis so that the center of gravity of the SXD2 is below the intersection point of the RA and DEC axes. This means you need fewer additional counterweights. Latitude setting The latitude is adjustable between 0 and 70 degrees (divided into 3 zones and adjustable +/- 15 degrees per zone, for high, medium and low latitudes); latitude scale in 2-degree increments; fine adjustment with a tangent screw head, approx. 0.8 degrees per turn. The wireless module in detail The Vixen Wifi adapter for EQ mounts allows you to control your Vixen mount via a smartphone or tablet. With the smartphone app STAR BOOK Wireless (free of charge) you can navigate the sky without any cables. The app turns your smartphone or tablet into a control unit for the equatorial mount in no time at all. The response delay of the mount, which is considered the biggest disadvantage of wireless connections, has been reduced to a level comparable to wired connections. Reduced power consumption compared to conventional controllers with LCD monitor The power consumption of the mount is reduced by up to 20%, allowing longer observations than with conventional wired controllers such as the STAR BOOK TEN. Operation similar to the STAR BOOK TEN controllerThe STAR BOOK Wireless app has a similar structure to the STAR BOOK TEN controller. Depending on the star map setting, it contains up to 259,000 celestial objects. Tap on a celestial object in the object list and start the GoTo. The mount will now automatically move to this target and bring it into the telescope's field of view. All the popular features of the STAR BOOK TEN are retained. Convenient operation When looking through the telescope operate the mount by swiping on the app's star chart. As there are no buttons, simply slide your finger over the star chart to operate the mount conveniently. Extensive astronomical data included In addition to data on easily observable celestial bodies such as Messier objects, NGC objects and IC objects, this also includes the sun, moon, planets, comets and dwarf planets. High-precision alignment By aligning the mount to one or two stars, you can already achieve fairly precise positioning. By aligning the mount to three or more stars, you can achieve high-precision alignment of the mount for high magnifications. The objects are then approached precisely and centrally in your telescope's field of view. The alignment information is saved and can be retained even when the device is switched off. By leaving the telescope in its current state after completing an observation without moving it, you can start the automatic installation with the same settings for the next observation.  Individual setting options As with the STAR BOOK TEN control unit, the app offers various individual settings, such as gear backlash compensation, night mode in red, autoguider and variable GoTo speed and LED brightness. You can also set the timing of the reversal of the objective tube (meridian flip) as desired. Even if the object moves to the south during tracking, you can prevent the telescope tube from reversing. Important note: Cannot be used on old SX mounts with the old blue Star Book! Technical information about the Wifi module: CPU with 32-bit CISC processor 120 MHz The unit is connected to the mount via a D-SUB 9PIN connector as with the STAR BOOK TEN. It has a 6-pin 6-wire modular plug for external autoguider operation. Supported operating systems are Android 6 or higher, iOS 9.0 or higher, WLAN standard: IEEE 802.11b/g/n. FEATURESRA sprocket: 180 teeth DEC sprocket: 180 teeth Shaft material and diameter: Carbon steel / Decl. 35 mm, RA 40 mm thickness  Fine height adjustment: 0° to 70°, (fine adjustment +/- 15°, height) Backsight rod: 20 mm diameter Azimuth adjustment: worm fine adjustment Power supply: DC12 V; 0.4~1.7 A Maximum load: 12 kg, photographic, without counterweight Counterweight: 1x 1.9 kg  Tripod connection: 45 mm spigot Dimensions: 36 cm (H) x 12 cm (W) x 36 cm (L), weight: 7.0 kg (15.4 lbs), without counterweight 32-bit CISC processor 120 MHz Operating system: Android 6 or higher, iOS 9.0 or higher Connection: D-SUB 9PIN connector Autoguider input: ST4 Power consumption SX2WL+Wireless unit: DC12V / 0.3-2.0 A (load 8 kg), 0.4-2.2 A (load 12 kg) SCOPE OF DELIVERYSX2WL EQ mount Wireless unit Counterweight: 1.9 kg (1pc) Mounting tools Cigarette lighter cable

The BRESSER Field Tripod ST-3 is a solid and height-adjustable tripod with double tripod leg clamp and made of corrosion-resistant stainless steel. It is suitable for direct usage with the BRESSER Slider Binocular Mount. Adjust the extendable stainless steel tripod to the desired base height and thereby pre-select your favourite observation position. For example, for landscape observation while standing or sitting, the full tripod height should be used. For night sky observation, a lower setting is recommended to ensure a comfortable viewing position while sitting or lying down. The tripod is equipped with a standard GP mounting head and a central screw with metric M10 threaded shaft. It is also suitable for EXOS-1 and EXOS-2 EQ mounts. The upper tripod leg tubes have a diameter of 50.8 mm (2 inches).FEATURESFor usage with BRESSER Slider Binocular Mount Standard GP mount head Also suitable for EXOS-1 and EXOS-2 EQ mounts Solid stainless steel and aluminium structure Double tripod leg clamp Height adjustable approximately from 68 to 110 cm Tripod weight: 5.5 kg Transport length approximately 87 cmUpper tripod leg tubes have a diameter of 50.8 mm (2 inches)SCOPE OF DELIVERYTripod Accessory tray Central spindle

The AP-SM mount is an enhancement of the AP mount. Unlike the AP mount, it has an RA motor and is equipped with the STARBOOK ONE controller. The AP mount provides a secure, stable support for your telescope. Thanks to the slip clutch mechanism, the mount can be adjusted quicky to the target object. There is a wide range of optional accessories. The ADVANCED POLARIS mount is ideal for both beginners and advanced observers who require a lightweight travel mount. STYLISH DESIGN The AP mount features an ultra-smooth finish without any projecting parts. Simply place your telescope on the mount and move it to the desired celestial object without having to loosen any clamps! QUICK POLAR ALIGNMENT The slip clutches allow you to adjust the telescope to your target object easily – no more searching for adjustment clamps in the dark! An optional polar meter is available, which enables you to locate the celestial pole when it is hidden by trees or buildings. OPTIONAL POLAR FINDER SCOPE The innovative polar finder scope provides a new way to polar align your telescope. Simply align the stars in the crosshair reticle with the same stars in the night sky. Polar alignment is achieved using 3 reference stars. The polar finder is illuminated to facilitate orientation and switches off automatically after 3 minutes to save battery power. POWER SUPPLY The RA and DEC motor modules are powered by four AA alkaline, Ni-MH or Ni-CD batteries. The RA motor module has a USB Micro-B port for an external power supply. A USB power pack or car charging cable can be used for longer observation sessions. STAR BOOK ONE CONTROLLER The STAR BOOK ONE is a multifunctional and intuitive controller that tracks in the RA and DC axis with a range of different speeds. The tracking options are designed for time-lapse cameras at a wide range of speeds, including sidereal, lunar and solar rates. The controller also offers many useful functions such as backlash compensation, autoguider port, PEC and a built-in red LED light. FEATURES R.A. Worm wheels: 58.4 mm Ø gear wheel with 140 teeth DEC. Worm wheels: 58.4 mm Ø gear wheel with 140 teeth Azimuthal adjustment: Twin adjusting screws Altitude adjustment: Twin adjusting screws Number of ball bearings: 7 Polar finder: Optional Motor: RA stepper motor Tracking: STAR BOOK ONE (max. 60x Slewing) Power supply: USB Micro-B Counterweight bar: 20 mm WHAT’S INCLUDED AP-SM mount 1.0 kg counterweight STARBOOK ONE controller

Whether you want to explore the night sky or make terrestrial observations during the day, the BRESSER NightExplorer 15x70 astronomy binoculars will ensure that you are perfectly equipped for all your outdoor adventures. The extra large lens diameter of 70 mm lets a large amount of light into the binoculars, while the 15x magnification ensures that you obtain highly detailed images of your observed targets. Fully multicoated optics ensure scattered light is kept to a minimum, so that you can enjoy a perfect view with the best possible optical performance. At a distance of 1000 metres, the field of view is 77 metres wide. The highly corrected eyepieces with 5 lenses in 3 groups produce vivid images with sharp edges. Coating The premium BaK-4 optics (barium crown glass) features a full multi-coating to increase light transmission and reduce reflections. Focusing Thanks to the individual eyepiece adjustment, you only need to focus the binoculars once. You can then enjoy a sharp image at infinity for the night sky. The binoculars also have a close focus, which you can set from a distance of 10 metres or more for close-up observations of your immediate surroundings. Also suitable for glasses wearers Thanks to the foldable eyecups, you can set the optimal distance between your eyes and the ocular lenses. If you wear glasses, this allows you to see the entire field of view of the Porro-prism binoculars. There is also a dioptre compensation of +/-8, which you can use to compensate for small differences in vision between your eyes. Weatherproof and robust Thanks to their waterproof design, the binoculars can be used in wet or foggy weather conditions, as water and moisture cannot enter the housing. The binoculars are filled with argon to stop the optics from fogging up. In addition, the ergonomic armouring provides a secure grip and protects the binoculars against impacts and knocks, making them ideal to travel with. Portable design The 15x70 Porro-prism binoculars come with an excellent lightweight aluminium tripod, with study ballhead mounting, to ensure wobble-free astronomical or terrestrial observations. Both the binoculars and the tripod can be stored in the sturdy padded backpack, which is also included in the set. This ensures that you can easily transport your gear to your desired vantage point, even if you have to go a long way to get there. Discover the night sky and the wonders of nature with the powerful BRESSER NightExplorer 15x70 astronomy binoculars! FEATURES Astronomy binoculars for astronomical and terrestrial observations High magnification and light-gathering power Magnification: 15x Lens diameter: 70 mm Optical design: Porro Full multi-layer coating BaK-4 glass material Rubber eyecups for spectacle wearers Individual eyepiece adjustment Highly corrected eyepieces for sharp-edged images Field of view: 77 m (at a distance of 1000 m) Close focus: from 10 m Dioptre adjustment: +/- 8 Tripod connection thread Includes Aluminium tripod Includes Backpack WHAT'S INCLUDED Astronomy binoculars Tripod Backpack Instructions with warranty information

Ultra sturdy tripod for AXD and AXD2 mounts.The tripod is vibration resistant and features 2 extendable sections.FEATURESVixen TR102 tripod for AXD/AXD2 mount Dimensions: Ø 55mmLength of legs: 760 mm to 1018 mmTripod height: 690 mm to 915 mmHolder: Base with 440 mm to 570 mm radiusWeight: 13.3 kgDELIVERY CONTENTTR102 tripod