Go to homepage
£0.00

Vixen SX 60 mm to 50.8 mm adapter sleeve

Skip image gallery
  • Adapts 60-mm focusers for 50.8-mm eyepieces
  • Extra-short at only 10 mm
  • Compatibility: All Vixen OTAs with 60-mm connection
  • Weight: 65 g

£31.00*

Prices include VAT. Shipping costs not included

Available, delivery time: 3-5 working days

Product number: X002470
EAN: 4955295372935
WEEE-Reg.-Nr.: DE 34323861

With BRESSER, you can enjoy a smooth introduction to the vast world of astronomy. Our detailed information ("Telescope Guide") provides valuable tips for beginners—but even experienced astronomers can use the information we provide (e.g., tables for the geographical latitude of all major world cities) as a reference.

Here is the table of contents of the comprehensive BRESSER Telescope Guide:

Sky Guides by Bresser

The Sky Guide provides comprehensive information on constellations, planetary positions, and astronomical events – perfect for planning your observations and delving deeper into astronomy.
Visit the guide directly here to make the most of your observations!

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Product and safety instructions


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • General safety instructions DANGER Risk of suffocation! Improper use of this product can result in suffocation, especially for children. Therefore, carefully observe the following safety instructions. Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a risk of suffocation! Keep cords, ribbons, and similar materials away from children! They could accidentally strangle themselves and suffocate! NOTE Risk of material damage! Improper handling can damage the device and/or accessories. Therefore, only use the device according to the following safety instructions. Do not dismantle the device! In the case of a defect, contact your dealer. They will contact the service center and may send the device in for repair.
  • Never look at the sun through an eyepiece/telescope without a certified protection filter. A moon filter can never be used for solar observation. The moon filter is only suitable for moon observation. The solar filter must be mounted in front of the telescope opening, not at the eyepiece. Otherwise, the concentrated light beam through the optics will immediately destroy the filter foil, leading to severe eye damage, including permanent blindness.
  • Never leave the optics unattended. Children and inexperienced adults could point the telescope at the sun without proper precautions and lose their eyesight.
  • Do not expose the device to high temperatures.
Skip product gallery

Customers also bought

Vixen 60–50.8-mm adapter sleeve for R200SS
Vixen 60–50.8-mm adapter sleeve for R200SS
The Vixen 60–50.8-mm adapter sleeve can be used to adapt the 60-mm connection of a Vixen focuser for a 50.8-mm eyepiece connection. This also allows a mark I–III coma corrector to be connected to a R200SS Newton telescope.FEATURES Adapter ring 60 mm to 50.8 mm Adapts 60-mm focusers for 50.8-mm eyepieces Compatibility: All Vixen OTAs with 60-mm connectionAllows a mark I–III coma corrector to be connected to a R200SS NewtonLength: 13 mm or 34 mmWeight: 66 gPACKAGE CONTENTSVixen 60–50.8-mm adapter sleeve

Available

£38.00*
Vixen SX dovetail adapter
Vixen SX dovetail adapter
The Vixen SX dovetail adapter is used to attach a telescope to a mount. Tube clamps are also required for this and are connected to the dovetail adapter. Suitable for use on GP and SX mounts, as well as various other mounts with a Vixen standard dovetail mount.FEATURESFor attaching telescopes to mounts with Vixen connectionSuitable for all SX, Porta and GP mountsWeight: 160 gPACKAGE CONTENTSVixen SX dovetail adapterScrew setAllen key

Available

£19.00*
%
BRESSER Adapter 2" on T2
BRESSER Adapter 2" on T2
Enables you to connect a camera to telescopes that accept 2" barrel eyepieces. You will need a T2-ring for your special camera type also. The very special feature of this adaptor is the very short mechanical design (2.0mm) which enables the camera use also on telescopes with a short focal range. This adapter is also prepared to use with 2" filters.   

Available

£17.90* £24.90* (28.11% saved)
Vixen T-ring for Canon EOS
Vixen T-ring for Canon EOS
T-rings are used as a connecting piece between the camera adapter and the camera. Please note that each camera type requires a different T-ring.FEATURESVixen T-ring for Canon EOS camerasConnects a camera adapter to the cameraFor microscopes, telescopes and T2 lensesWeight: 52 gPACKAGE CONTENTSVixen T-ring for Canon EOS

Available

£28.00*
Vixen Dual-Speed-Focuser
Vixen Dual-Speed-Focuser
​The 1: 7 reduction enables very fine focusing of targets.An indispensable accessory, especially in astrophotography.The reduction can be retrofitted on the following telescopes:A80M, A105M, NA140SSf, ED81S, ED103S, ED115S, AX103S, VC200L, VMC200L and R200SSCannot be used on old devices from the 90s with plastic focusing knobs - in these cases, it is also necessary to swap the focus spindle (please contact us for details).PROPERTIESAllows very fine focusingIndispensable in astrophotographyCan be retrofitted to many Vixen telescopesReduced to 7:1Weight: 170 gWHAT'S INCLUDEDDual Speed KnobAssembly tool

Available

£192.00*
Vixen DC ring 60 mm to T2 camera thread
Vixen DC ring 60 mm to T2 camera thread
This DC ring can be used to fit a 60-mm thread to a 42-mm T2 thread. It is suitable for use with T-mount adapter rings for cameras or with the Vixen T2 42–31.7 mm reducing sleeve (item no.: X002294). This means it can be used to mount DSLR cameras on the Vixen R200SS and other telescopes with 60-mm focuser.FEATURESFor fitting T-mount adapter rings for the camera Adapts to 31.7 mm when connected to the Vixen eyepiece adapter (item no.: X002294)Weight: 26 g PACKAGE CONTENTSDC ring 60 mm

Available

£46.00*