Vixen SX 115mm tube clamp pair white

Product Highlights

Suitable for the telescopes A105M, A105MII, ED103S, SD103S, AX103S

  • For safe and stable mounting of your telescope
  • Suitable for A105M, A105MII, ED103S, SD103S, AX103S scopes
  • Weight: 400g

£87.00*

Available

Product number: X000298
GTIN/EAN: 4955295266500

With BRESSER, you can enjoy a smooth introduction to the vast world of astronomy. Our detailed information ("Telescope Guide") provides valuable tips for beginners— but even experienced astronomers can use the information we provide (e.g., tables for the geographical latitude of all major world cities) as a reference.

Here is the table of contents of the comprehensive BRESSER Telescope Guide:

With BRESSER, you can enjoy a smooth introduction to the vast world of astronomy. Our detailed information ("Telescope Guide") provides valuable tips for beginners—but even experienced astronomers can use the information we provide (e.g., tables for the geographical latitude of all major world cities) as a reference.

Here is the table of contents of the comprehensive BRESSER Telescope Guide:

Product information "Vixen SX 115mm tube clamp pair white"
Vixen tube ring pair 115 mm in white. For safe and stable mounting of your telescope on the mount. In addition, a dovetail adapter is required for your mount. Can be used on the telescopes A105M, A105MII, ED103S, SD103S, AX103S. Not suitable for the VSD 100 f3.8.


FEATURES
  • For A105M, A105MII, ED103S, SD103S, AX103S
  • Mounting: M6 threaded hole
  • Weight: 400 g

SCOPE OF DELIVERY
  • 2x tube rings 115 mm
  • Mounting screws
  • Mounting tool
Colour: white
Material: Aluminium, Plastic

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Accessories

Vixen SX dovetail adapter
The Vixen SX dovetail adapter is used to attach a telescope to a mount. Tube clamps are also required for this and are connected to the dovetail adapter. Suitable for use on GP and SX mounts, as well as various other mounts with a Vixen standard dovetail mount.FEATURESFor attaching telescopes to mounts with Vixen connectionSuitable for all SX, Porta and GP mountsWeight: 160 gPACKAGE CONTENTSVixen SX dovetail adapterScrew setAllen key

£19.00*
Vixen Dovetail Slide Bar M
The Vixen dovetail bar M is designed to balance an optical telescope tube. This is achieved by securing the bar to the tube clamps.FEATURES Dimensions: 211 mm x 50 mm x 21 mm Weight: 270 g / 9.52 ozDELIVERY CONTENTVixen dovetail bar MToolMounting screws

£46.00*
Vixen SD103S apochromatic Refractor
A new apochromatic refractor with high performance Super-ED glass (= SD). The FPL53 glass reproduces an extremely clear and sharp image by an exceptionally high degree of elimination of residual chromatic aberrations. The advantage of these SD refractors is their short length and low weight. The SD glass is designed to bring all beams of violet, red, blue, yellow and green very precisely together on the same plane. The special lens material, reduces chromatic aberration across all colors. In combination with the new optional SD Reducer HD Kit or SD Flattener HD, these refractors allow illumination with a 44mm image circle for full format SLR cameras. FEATURES Lens diameter: 103mm Type of coating: Multi-coated Focal length: 795 mm (f7.7) Resolution: 1.13 arc seconds Visual limit value: 11.8 mag Max. magnification: 206x Tube length: 810mm Tube diameter: 115mm Tube weight: 5,4kg Viewfinder telescope: 7x50 with illumination unit Adapter 7.0 degrees FOV included Connections/adapters: thread 60mm and 31.7mm for T-ring Eyepiece adapter: 50.8mm (2 inches) and 31.7mm (1.25 inches)Backfocus without Reducer: 150,4 mmBackfocus with Reducer: 63,5 mmFlip mirror included SCOPE OF DELIVERY Optical Tube Tube rings with carrying handle GP dovetail adapter Flip mirror Dust covers

£1,963.00*
Vixen A105MII achromatic refractor - optical tube assembly
This high-quality refractor features a 105 mm achromatic lens. It produces impressive images of the moon’s craters and Saturn’s ring system. The long F9.5 aperture ratio delivers an optimal contrast and ensures that colour deviations are kept to a minimum. The telescope is made in Japan using cutting-edge manufacturing processes. Highly recommended for beginners and advanced observers who value quality and excellent workmanship. FEATURES Lens: 105 mm achromatic Focal length: 1000 mm Aperture ratio F9.5 Resolution 1.1 Limiting magnitude: 11.9 Light-gathering power: 225× Photography: YesDimensions: 1010 mm x 115 mm Weight: 4.8 kg WHAT’S INCLUDED Tube clamps Carry handle Red dot finder Flip mirror

£971.00*

Similar products

%
Explore Scientific ASTRO R-LITE red light Flashlight
The ASTRO R-LITE red light flashlight is the ideal companion at night to read star charts or make adjustments to the equipment without losing the dark adaptation of the eyes. The ASTRO R-LITE offers 3 functions: Continuous light bright / Continuous light dark / Flashing. The large diffusing lens results in a very large and evenly illuminated light cone, which can also be adjusted by a sliding mechanism. By using a power-saving LED lamp, the battery life (1 x AA-LR6) is up to 100 hours. Of course, the robust lamp housing made of aluminium is splash-proof according to IPX4 and therefore particularly well suited for outdoor applications. The side cutouts on the front of the ASTRO R-LITE provide a 360° signal function. The 50 cm long carrying strap with quick coupling and an extra belt clip included in the scope of delivery ensure that the flashlight is always quickly at hand. The ASTRO R-LITE should not be missing in any equipment. FEATURES ASTRO R-LITE Red Light Flashlight Reading star maps at night Dark adaptation of the eyes is retained Continuous light bright / Continuous light dark / Flashing 360° signal function Large diffusing lens produces a uniformly illuminated light cone Carrying strap and belt clip included Battery life up to 100 hours - Battery (1 x AA-LR6) Splash-proof according to IPX4Robust lamp housing made of aluminiumSCOPE OF DELIVERYASTRO R-LITE Red Light Flashlight Carrying strap Belt clip Battery (1 x AA-LR6)

£13.00* £16.90* (23.08% saved)
BRESSER BR-LP15 Cleaning kit - 3 parts
With the 3-piece lens cleaning set you not only clean camera or binocular lenses, but also spectacles glasses and displays and screens of smartphones, laptops, tablets, etc. thoroughly and safely. When cleaning high quality optical lenses, you have to be very careful. After all, it would be very annoying to successfully remove the dust but leave a scratch behind. With the lens cleaning pen you can safely clean optical and coated glass. With the brush on one side you can remove coarser dirt before polishing the lenses with the other side. Just blow away fluff with the bellows. FEATURES complete set for safe cleaning of camera lenses bellows for removing coarse dirt particles and fluff without scratching the lens lint-free microfibre cloth approx. 14,5x14,5cm lens cleaning pencil for safe cleaning of optical and coated glass SCOPE OF DELIVERY 1x bellows 1x lens cleaning pen 1x microfiber cloth

£4.90*
Vixen adjustment shaft, 300 mm, flexible
300 mm adjustment shaft with flexible design for comfortable observations with the Porta II and the Mini Porta.The large adjustment knobs allow you to make smooth, fine adjustments to the axles.Also compatible with a wide range of other mounts from other manufacturers.FEATURESComfortable tracking by handLarge adjustment knobs for fine tuningDesigned for wide range of mountsLength: 300 mmDELIVERY CONTENT300 mm adjustment shaft

£23.00*
BRESSER Dew-Shield for MCX127/MC127 telescopes
Each dew shield threads into the front lens cell and effectively inhibits the formation of dew on the lens surface in humid/cool observation conditions. Reduces reflections caused by scattered light incident from the side. Protects the front lens from accidental contact and scratches. FEATURES Prevents fogging of the front lens Reduces reflections caused by stray light Protects the front lens of the telescope Use in humid/cool conditions Suitable for BRESSER MCX127/MC127 telescopes Easy to screw into the telescopic tube Length: 120mm , weight: 160g SCOPE OF DELIVERY Dew cap, 1 piece

£34.00*
Vixen Lens Heater 360 IV
The 360 IV Lens Heater is designed to prevent camera lenses and telescopes from fogging up due to dew. It is also well suited for eyepieces.The heating element is a carbon fiber heater with a high thermal efficiency. The textile heating element provides great flexibility compared to other heating materials. The power cord (USB cable) has a particularly high flexibility to be still elastic at low temperatures. A very flexible Velcro tape allows for quick and easy attachment to and removal from the lens. The tape can be easily removed from the lens without pulling tightly. The heating tape has a very low power consumption and can be operated with a 10,000 mA battery for up to 14 hours.The Vixen Lens Heater 360 IV in detailWhen moisture in the air comes into contact with an object whose temperature is lower than the ambient temperature, small drops of water form - so-called dew condensation. Astrophotography often suffers from such lens fogging and the photo turns milky. Because the temperature and humidity change during the night and the camera becomes cooler than the ambient temperature, it is important to warm the objective's or telescope's lens by using heaters to prevent it from fogging. We recommend using the Lens Heater 360 IV when you want to do astrophotography or night photography on the coast, in the mountains or in cold regions. The heating elements are made of carbon fibers with improved heating performance, introduced for the fourth generation Vixen Lens Heater 360 IV. They efficiently keep the lens warm and fog-free with minimal power consumption. The heater temperature reaches 10 degrees Celsius above the ambient temperature (at 20 °C outside temperature and no wind). However, it varies according to influences in the environment. For power supply the lens heater is equipped with a detachable coiled cable (USB Type-C), up to 50 cm long. The 360 IV lens heater consumes only 2.5 W of power (5 V - 0.5 A). With a portable USB battery of e.g. 10,000 mA, it can operate continuously for about 14 hours (at 20 °C outdoor temperature). However, the operating time varies greatly depending on the environment and temperature. The soft and non-slip surface of the heating tape allows for easy attachment to the objective, eyepiece or telescope. The heater consists of a 30 mm wide and 600 mm long heating tape and is suitable for diameters up to 100 mm.FEATURESHeating type: carbon fiber textile heatingTemperature: 10 degrees Celsius above ambient outdoor temperature (at 20° C, no wind)Power source, power consumption: USB, 5 V, 0.5 A, 2.5 WPower cable: USB A (male)Connector: USB type C connector detachable coiled cable 20 to 50 cmOperating time: approximately 14 hours with fully charged 10,000 mAh battery (at 20 °C outdoor temperature)Recommended for lenses with a width of 30 mm and an outer diameter of 45 to 100 mmDimensions: 30 x 600 mmTotal weight: 67 gSCOPE OF DELIVERYLens Heater 360 IVUSB spiral cable

£83.00*
BRESSER Counterbalance 4,5kg for EXOS-2/EQ5
Additional counterweight to balance heavy accessories etc.

£39.90*
Vixen counterweight, 7 kg, for AXD and AXJ mounts
7 kg counterweight for balancing the mount with heavy telescopesSuitable for AXD, AXD2 and AXJ mountsFEATURES Counterweight for AXD/AXJ mounts Weight: 7 kgDELIVERY CONTENT7 kg counterweightClamp screw

£145.00*
Vixen Counterweight 1.9kg
With the 1.9 kg counterweight, heavier optical tubes can be balanced on many Vixen mounts. COMPATIBLE WITH THE FOLLOWING VIXEN MOUNTS SX SX2 SXD SXD2 SXP GP2 GPD2 SCOPE OF DELIVERY 1x 1.9 kg counterweight

£49.00*
Vixen SG-L02 Headlamp red-light white-light
The perfect LED head torch for nighttime observations! Adjusting your eyes to the dark surroundings is very important when making astronomical observations. In dark areas, it is very difficult to use astronomical equipment without a suitable light. With normal lights, however, the light intensity is more important than protecting your eyes against bright light. Using these lights at night makes your pupils contract, which can make it difficult for your eyes to readjust to the darkness. The SG-L01, our first astronomy LED lamp, featured a built-in red LED that provided a solution to this problem. However, the red light did not offer optimal visibility. On our new astronomy LED light, the SG-L02, the LED lights produce warm light to improve visibility. They also ensure that your eyes stay adapted to the dark. The LEDs do not emit light in the sensitive range of 555 nm. The brightness of the white light can be adjusted between 3 and 42 lumen, while the red light can be adjusted between 0.28 and 7.62 lumen. FEATURES Dimmable red light ensures that your eyes stay adapted to the dark Built-in rechargeable battery, charges via USB Waterproof design LED colour can be switched from red to white 0.28 to 7.62 lumen for red light 3 to 42 lumen for white light Dimensions: 41 mm x 33 mm x 30 mm Weight: 29 g DELIVERY CONTENT SG-L02 head torch Strap (size S) Strap (size L) Pocket clip Cable for charging the battery (USB-A plug to USB Micro-B plug)

£65.00*
BRESSER Counterbalance 2.0 kg for EXOS-1 + 2
Additional counterweight to balance heavy accessories etc.FEATUREScolor matched with the Bresser EXOS-1/2 seriessuitable for counterbalance bar with 20mm diameterSCOPE OF DELIVERY1x counterbalance 2.0kg

£29.90*
Vixen Tube Clamp 115s for VSD90ss
Vixen Tube Clamp 115s for VSD90ss This high-quality tube clamp made in Japan is used to mount the VSD90ss f 5.5 astrograph. The base plate has M6 and M8 holes and can therefore be used on almost all mounts.FEATURES Supplied with various holes as standard High-quality CNC-milled aluminium tube clamp with non-slip locking screw Felt on the inside, prevents scratches on the VSD tube Threaded screw holes bottom: M8 holes x 2 (spacing 35 mm), M6 holes x 2 (spacing 35 mm) x 2 rows, 1/4-inch holes x 3 (inside 30 mm), 1/4-inch holes x 3 (interval 30 mm) Threaded screw holes top: M8 holes x 2 (spacing 35 mm) x 2 sets, M6 holes x 2 (spacing 35 mm) x 2 rows, 1/4-inch hole x 1 in the centre, M4 holes x 2 (spacing 20 mm) Dimensions: 162 × 71 × 155 mmSCOPE OF DELIVERY VSD tube clamp

£233.00*
BRESSER Handle for Messier optical tube
This carrying handle is suitable for installation on BRESSER MESSIER 6, 8 and 10 inch Dobson telescopes. In combination with the optionally available prism rail (GP standard) Art. No. 4940140, these Dobson telescope tubes can be used on any telescope mount with the appropriate carrying capacity. A comfortable transport of the tube is guaranteed by the mounting in the center of gravity. The carrying handle is also suitable as a spare part for all other MESSIER telescopes. FEATUREScarrying handle for 6 , 8 and 10 inch MESSIER Dobson telescopeswhen using telescopic tubes on EQ mountsconvenient transport due to central assemblythe assembly is carried out on the original tube ringsalso suitable as spare part for all MESSIER telescopesassembly material and tools includedlength: 190mm; Width: 30 mm; Height: 38 mmbore spacing: 160 mm; Bore diameter: 6.5 mm SCOPE OF DELIVERYcarrying handlemounting screws (2 pieces; 1/4 inch)hex wrench tool (3/16 inch)

£27.00*

Customers also viewed

BRESSER Messier 8x50 Viewfinder
BRESSER Messier 8x50 Viewing finder scope with mount and integrated illumination. Finder slot included.FEATUREShigh-quality workmanshipintegrated illuminationeyepiece with reticleSCOPE OF DELIVERYviewfindermountviewfinder shoeprotective caps

£89.00*
BRESSER Weather Station 5-in-1, black
The new BRESSER Weather Station 5-in-1 combines in a unique way a compact design with an extensive information service. The very compact and multifunctional outdoor sensor requires only little space and thus can be placed almost anywhere. A pipe clamp and screws for the attachment at poles (pipe diameter of about 25-33 mm) as well as a stand are already included! The 5-in-1 outdoor sensor transfers reliably all measured values for wind speed, wind direction, humidity, temperature and precipitation rate to the base station. On the clearly structured display of the base station not only these values can be read but also a multitude of history data. The latter allows the internal storage and evaluation of measured data over a period of 24 hours. From the collected measured data, the weather station calculates a very reliable local weather trend forecast for the next 12 hours, depicted by six graphic symbols on the display. For minimum and maximum values an individual alarm can be programmed, which gives an acoustic and a light signal when the defined value is reached. For outside temperatures of -3 °C and below a special alarm for frost/ice warning can additionally be activated. A poor indoor climate often involves health risks especially for children and the elderly. The BRESSER Weather Station 5-in-1 offers you a smart feature to deal with this. The indoor climate indicator informs steadily about the indoor climate with a symbol. Furthermore, the BRESSER Weather Station 5-in-1 features a radio controlled time and date setting (DCF time signal). Already a few minutes after switching the device on the current Central European Time (CET) and the date with weekday are displayed automatically. For the ''moonstruckers'' also the different phases of the moon are shown. An alarm function with snooze mode is also integrated. FEATURES 5-in-1 outdoor multi sensor Inside temperature (°C/°F) and humidity Outside temperature (°C/°F) and humidity Wind direction and speed Graphical weather trend display (12 hours) Beaufort index (scale for the classification for wind speeds) Precipitation rate with history (day/week/month) Air pressure with history (24 hours) Heat index Dew point Radio controlled time and date setting Phases of the moon Alarm function Ice/frost warning Min/Max memory (up tp 24 hours) LED background light, amber SCOPE OF DELIVERY Base station with stand 5-in-1 Multisensor with mounting material Manual Additionally, 6 AA batteries are required (not included) PLEASE NOTE: If you should ever need a new outdoor sensor for this product, please check the LOT number on your device or on the packaging: Weather Stations with LOT number 1156742 and lower are compatible with the outdoor sensor with item number 7802520. Weather Stations with LOT number 1156743 and higher are compatible with the outdoor sensor with item number 7802580.

£122.99*