Go to homepage
£0.00

Vixen Dual-Speed-Focuser

Skip image gallery

The 1:7 reduction ratio enables very fine focusing of targets

  • Dual speed fine focus knob
  • 7:1 gear ratio
  • Easily fitted to numerous telescopes in the Vixen line
  • Weight: 170 g

£192.00*

Prices include VAT. Shipping costs not included

Available, delivery time: 3-5 working days

Product number: X000143
EAN: 4955295372270
WEEE-Reg.-Nr.: DE 34323861

With BRESSER, you can enjoy a smooth introduction to the vast world of astronomy. Our detailed information ("Telescope Guide") provides valuable tips for beginners—but even experienced astronomers can use the information we provide (e.g., tables for the geographical latitude of all major world cities) as a reference.

Here is the table of contents of the comprehensive BRESSER Telescope Guide:

Sky Guides by Bresser

The Sky Guide provides comprehensive information on constellations, planetary positions, and astronomical events – perfect for planning your observations and delving deeper into astronomy.
Visit the guide directly here to make the most of your observations!

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Product and safety instructions


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • General safety instructions DANGER Risk of suffocation! Improper use of this product can result in suffocation, especially for children. Therefore, carefully observe the following safety instructions. Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a risk of suffocation! Keep cords, ribbons, and similar materials away from children! They could accidentally strangle themselves and suffocate! NOTE Risk of material damage! Improper handling can damage the device and/or accessories. Therefore, only use the device according to the following safety instructions. Do not dismantle the device! In the case of a defect, contact your dealer. They will contact the service center and may send the device in for repair.
  • Never look at the sun through an eyepiece/telescope without a certified protection filter. A moon filter can never be used for solar observation. The moon filter is only suitable for moon observation. The solar filter must be mounted in front of the telescope opening, not at the eyepiece. Otherwise, the concentrated light beam through the optics will immediately destroy the filter foil, leading to severe eye damage, including permanent blindness.
  • Never leave the optics unattended. Children and inexperienced adults could point the telescope at the sun without proper precautions and lose their eyesight.
  • Do not expose the device to high temperatures.
Skip product gallery

Accessories

%
Vixen SD103S apochromatic Refractor
Vixen SD103S apochromatic Refractor
A new apochromatic refractor with high performance Super-ED glass (= SD). The FPL53 glass reproduces an extremely clear and sharp image by an exceptionally high degree of elimination of residual chromatic aberrations. The advantage of these SD refractors is their short length and low weight. The SD glass is designed to bring all beams of violet, red, blue, yellow and green very precisely together on the same plane. The special lens material, reduces chromatic aberration across all colors. In combination with the new optional SD Reducer HD Kit or SD Flattener HD, these refractors allow illumination with a 44mm image circle for full format SLR cameras. FEATURES Lens diameter: 103mm Type of coating: Multi-coated Focal length: 795 mm (f7.7) Resolution: 1.13 arc seconds Visual limit value: 11.8 mag Max. magnification: 206x Tube length: 810mm Tube diameter: 115mm Tube weight: 5,4kg Viewfinder telescope: 7x50 with illumination unit Adapter 7.0 degrees FOV included Connections/adapters: thread 60mm and 31.7mm for T-ring Eyepiece adapter: 50.8mm (2 inches) and 31.7mm (1.25 inches)Backfocus without Reducer: 150,4 mmBackfocus with Reducer: 63,5 mmFlip mirror included SCOPE OF DELIVERY Optical Tube Tube rings with carrying handle GP dovetail adapter Flip mirror Dust covers

Available

£1,679.00* £2,099.00* (20.01% saved)
%
Vixen AX103S apochromatic Refractor - optical Tube
Vixen AX103S apochromatic Refractor - optical Tube
The AX103S is a top-of-the-range ED apochromat in the refractor series. It features a triplet ED object lens and a rear-mounted field-flattener lens. The f8.0 refractor contains a central ED lens in the objective and reduces chromatic aberration to an absolute minimum. An optional focal reducer can reduce the aperture ratio to 1:5.6 in order to provide quicker results for astrophotographers. The built-in field flattener lens provides a sharp image across the entire field of view – an essential requirement in astrophotography. The 60 mm ring on the focuser allows you to attach a 2’’ eyepiece or accessories and a camera adapter. The AX103S is specially designed for photography, but also offers stunning visual performance, especially for observing the moon and the planets. The AX 103S is corrected for full frame photography and provides razor-sharp pictures right into the corners of the image field. This telescope is guaranteed to provide a lifetime of outstanding performance! FEATURES Optimized for full frame photography Fully coated triplet ED objective with flattener Very high sharpness and contrast Optional reducer availableBackfocus without Reducer: 150.0 mmBackfocus with Reducer: 63,5 mm103 mm aperture and 825 mm focal length WHAT’S INCLUDED Telescope Tube clamps and carry handle Illuminated 7x50 viewfinder telescope Vixen's very useful Flip mirror diagonal system for finding and framing targets

Available

£1,998.00* £2,999.00* (33.38% saved)
Vixen VC200L Optical tube
Vixen VC200L Optical tube
Astrophotographers generally use two different focal lengths: Short focal lengths for overview photos and extensive deep-sky objects, and long focal lengths for objects which are further away. Our aspherical mirror optics offer the perfect solution for these scenarios. The VISAC primary mirror (Vixen Sixth-Order Aspheric Cassegrain) is specially designed for astrophotography and provides a fully flat and true-colour image over the entire image frame. Thanks to the three-element field corrector in front of the convex secondary mirror, there is no spherical aberration, coma or field curvature. Although the device is designed for astrophotography, it is also suitable for visual observations. FEATURES Photographically optimized thanks to field flattener lens Revolutionary coating technology High light-gathering power Photographically optimised optical system Built-in field flattener lens 200 mm aperture and 1800 mm focal length Optional reducer availableBackfocus without Reducer: 142,9 mmBackfocus with Reducer: 63,5 mmWeight: 6.9 kg DELIVERY CONTENT VC200 reflector telescope Carry handle 7x50 finder scope (illuminated) Flip mirror Dovetail adapter

Available

£2,168.00*
Vixen VSD90ss Astrograph
Vixen VSD90ss Astrograph
Fast 90 mm high-performance astrograph for demanding astrophotographers and observers with 5 lens elements in 5 groups. Due to the complex optical structure with five lens groups and five elements (quintuplet), including two SD (Super ED) lenses and an ED lens (Extra-low Dispersion) , a virtually aberration-free optical system was created. This revolutionary astrograph is compatible with a full-frame digital DSLR or an even larger 44x33 mm camera. The 90 mm astrograph with fast aperture ratio delivers exceptionally sharp, high-contrast and small point stars from the centre to the corners of the field of view. In addition, it is also ideal for visual observation with a very large field of view but also for planetary observation with high magnification. The VSD90ss is designed so that there is a "long peak range" in the adjustment accuracy of the sharpness, so that photographers can always achieve satisfactory results in astrophotography. Even if the focus is not quite precise, round and sharp stars are still shown throughout the entire image field. Illumination without vignetting In most cases, an astrograph also produces optical vignetting (a gradual decrease in light rays towards the edge of the image) This is mainly caused by rear lenses being shaded by the front lenses. Because of this darkening, it is relatively normal for the photographer to have to further edit the image after taking the picture and also have to do some additional so-called flats before taking the picture. To solve this problem, the VSD90ss uses wide aperture lenses in the rear elements, securing over 90 % of the light volume at the edge of the 60 mm image circle. Since the light intensity is uniform throughout the entire image field of the VSD90ss, there is no need for complex technology to prevent edge darkening. The VSD90ss is coated with the most modern coatings of extremely high reflectivity. These coatings have been specifically developed to optimize the properties of each individual lens element without degrading contrast and light intensity across multiple lenses. Numerous gradations of light bring beautiful point-like stars into the image field The low optical vignetting ensures sufficient illumination and thus eliminates the asymmetric flare caused by bright, diffraction-limited stars. It prevents stars at the edge of the 60 mm image circle from exhibiting deformations such as comets, astigmatism or coma. Since the illumination of the image field is relatively similar from the center to the edge of the image, you can expect excellent star imaging. Please note: *Depending on the recording system used, mechanical vignetting can still occur due to the camera body or incorrect adapters. 96.7ï¼… Strehl for impressive visual observations The VSD90ss offers a flattened large field of view with a low magnification wide angle eyepiece. Even with a high-quality wide-field eyepiece with a large field of view, you can get sharp images of stars in the entire field of view when visually observing! In the centre of the field of view, a Strehl intensity of an impressive 96.7% is achieved at visible wavelengths. This Strehl ratio exceeds that of the SD81SII apochromat at 95.7%, which is known for its excellent optical properties, and this also works excellently when observing the moon and planets at high magnification. The versatile large and stable focuser The VSD90ss has a large focuser with a diameter of 87.5 mm to make optimal use of the large illumination field of 60 mm. With the large extension that is compatible with many accessories, it is perfect for astrophotography up to large format or 35 mm full frame DSLR cameras. Thanks to its precise manufacturing, it is also suitable for very heavy cameras without tipping. The precision locking lever of the eyepiece extension The focuser's extension tube has a locking lever that holds the extension tube firmly in position even when using heavy cameras such as large format cameras or CCD cameras with a large sensor. The locking lever clamps the rack gear to the extension barrel so that the viewing angle or focus on your camera does not shift. Compatible with motor driven focusers An optional two-speed motor focuser (not included) is available for the VSD90ss to provide sensitive focusing. An EAF (Electronic Automatic Focuser) from ZWO or equivalent can also be retrofitted. Optional VSD Reducer for even faster results The tried and tested optional VSD reducer, which was also used on the predecessor, the VSD 100, is also compatible with the VSD90ss. The photographer gets even faster results in astrophotography with an aperture ratio of 1:3.9. CHARACTERISTICS 90 mm aperture, 495 mm focal length (F5.5) Needle-fine stars up to the image field edge in 44x33 mm format 5 lens elements in 5 groups Image illumination up to 60 mm Resolution power: 1.29 Limit size: 11.5 Light gathering capacity: 165x Illumination: 60 mm Dimensions: 115 mm diameter x 600 mm length (476 mm length for storage) Weight: 4.3 kg Connections/Thread: Size thread/84 mm (pitch 1 mm), 60 mm (pitch 1.0 mm), 42 mm for T-ring push fit / 60.2 mm, 50.8 mm and 31.7 mm Solar observation: separately available solar projection approach B Optional VSD100 reducer compatible (opening ratio F: 3.9) SCOPE OF DELIVERY VSD90ss high performance astrograph

Available

£5,983.00*
Vixen SD115SII Telescope OTA
Vixen SD115SII Telescope OTA
The Vixen SD115IIS is a new 115 mm apochromatic refractor with high-performance Super-ED glass (= SD). The advantage of this SD refractor is its short length and low weight. The FPL53 glass reproduces an extremely clear and sharp image by an exceptionally high degree of elimination of residual chromatic aberrations. The SD glass is designed to bring all beams of violet, red, blue, yellow and green very precisely together on the same plane. The special lens material, reduces chromatic aberration across all colours.The new Vixen SD115SII no longer uses spacer plates, which leads to a significantly better image quality, especially with bright stars. In photographic images, no spikes can be seen on the stars, which were otherwise produced by the spacer plates. In addition, you will be thrilled when you look at the moon or the brighter planets and observe the moon craters pin sharp as well as with extremely high contrast. Also look at the ring planet Saturn or the cloud bands on Jupiter. But of course, brighter deep sky objects such as the Orion Nebula or the Andromeda Galaxy can also be observed in impressive detail.In combination with the new optional SD Reducer HD Kit or SD Flattener HD, this refractor allows illumination with a 44 mm image circle for full format SLR cameras. The older ED81SII, ED103S, ED115S refractors were originally developed for visual observers and photographers using APS-C cameras. However, the new SD series is also optimised for use with full-frame cameras through the use of new inner baffle rings. The large 60 mm eyepiece extension also allows heavy cameras to be attached without tilting. Furthermore, the included folding mirror allows comfortable observation even in unfavourable observation situations and additionally offers a T2 thread for connecting a DSLR camera. This allows you to observe in straight line or at a 90° angle. The carrying handle attached to the tube clamps ensures a secure grip when transporting the telescope. FEATURESObjective lens: D=115 mm, multi-coated 2-lens SD apochromat without spacer plates No more spikes on the stars Focal length: 890 mm (f7.7) Resolution and limiting magnitude: 1.01 arcseconds; 12.5 Light gathering power: approx. 270x more than the human eye Dimensions and weight: 125 mm dia x 920 mm; 6.3 kg Viewfinder telescope: 7x50 illuminated Adapters and connections: 60 mm thread, 50.8 mm and 31.7 mm socket, thread for T-ring Connection: 50.8 mm and 31.7 mm socket with flip mirror / folding mirror Photography: primary focus and eyepiece projection SCOPE OF DELIVERY Refractor SD115SII Telescope (OTA) Tube clamp with dovetail Dew cap Flip-Mirror / folding mirror Carrying handle Dovetail rail 7x50 viewfinder

Available

£2,898.00*
%
Vixen SD103SII Telescope OTA
Vixen SD103SII Telescope OTA
The Vixen SD103SII Telescope OTA is a new 103 mm apochromatic refractor with high-performance Super-ED glass (= SD). The advantage of this SD refractor is its short length and low weight. The FPL53 glass reproduces an extremely clear and sharp image by an exceptionally high degree of elimination of residual chromatic aberrations. The SD glass is designed to bring all beams of violet, red, blue, yellow and green very precisely together on the same plane. The special lens material reduces chromatic aberration across all colours.The new Vixen SD103SII no longer uses spacer plates, which leads to a significantly better image quality, especially with bright stars. In photographic images, no spikes can be seen on the stars, which were otherwise produced by the spacer plates. In addition, you will be thrilled when you look at the moon or the brighter planets and observe the moon craters pin sharp as well as with extremely high contrast. Also look at the ring planet Saturn or the cloud bands on Jupiter. But of course, brighter deep sky objects such as the Orion Nebula or the Andromeda Galaxy can also be observed in impressive detail.In combination with the new optional SD Reducer HD Kit or SD Flattener HD, these refractors allow illumination with a 44 mm image circle for full format SLR cameras. The older ED81SII, ED103S, ED115S refractors were originally developed for visual observers and photographers using APS-C cameras. However, the new SD series is also optimised for use with full-frame cameras through the use of new inner baffle rings. The large 60 mm eyepiece extension also allows heavy cameras to be attached without tilting. Furthermore, the included folding mirror allows comfortable observation even in unfavourable observation situations and additionally offers a T2 thread for connecting a DSLR camera. This allows you to observe in straight line or at a 90° angle. The carrying handle attached to the tube clamps ensures a secure grip when transporting the telescope. FEATURESObjective lens: D=103 mm, multi-coated 2-lens SD apochromat without spacer plates No more spikes on the stars Focal length: 795 mm (f7.7) Resolution and limiting magnitude: 1.13 arcseconds; 11.8 Light gathering power: approx. 217x more than the human eye Dimensions and weight: 115 mm dia x 810 mm; 5.5 kg Viewfinder telescope: 7x50 illuminated Adapters and connections: 60 mm thread, 50.8 mm and 31.7 mm socket, thread for T-ring Connection: 50.8 mm and 31.7 mm socket with flip mirror / folding mirror Photography: primary focus and eyepiece projection SCOPE OF DELIVERY Refractor SD103SII Telescope (OTA) Tube clamp with dovetail Dew cap Flip mirror / folding mirror Carrying handle Dovetail rail 7x50 viewfinder

Available

£1,759.00* £2,199.00* (20.01% saved)
%
Vixen SD81SII Telescope OTA
Vixen SD81SII Telescope OTA
A new 81 mm apochromatic refractor with high-performance Super ED glass (= SD). The advantage of these SD refractors is their short length and low weight.The FPL53 glass reproduces an extremely clear and sharp image due to an exceptionally high elimination of residual colour errors. The SD glass is designed to bring all rays of violet, red, blue, yellow and green together very precisely on the same plane. Thus, the special lens material reduces chromatic aberration across all colours.The new Vixen SD81SII no longer uses spacer plates, which leads to significantly better image quality, especially with bright stars. This means that there are no more spikes on the stars in photographic images, which were otherwise produced by the spacer plates. You will be thrilled when you look at the moon or the brighter planets and observe the moon craters pin sharp and with an extremely high contrast. Observe the ring planet Saturn or the cloud bands on Jupiter.But of course, brighter deep sky objects such as the Orion Nebula or the Andromeda Galaxy can also be observed impressively.In combination with the new optional SD Reducer HD Kit or SD Flattener HD, this refractor allows illumination with a 44 mm image circle for full-frame SLR cameras.The older ED81SII, ED103S, ED115S refractors were originally designed for the visual observer or the photographer using APS-C cameras. However, the new SD series has been optimised for use with full-frame cameras by inserting new inner baffle rings.The large 60 mm focuser allows heavy cameras to be attached without tilting. The supplied flip mirror allows comfortable observation, even in unfavourable observation situations, and also offers a T2 thread for connecting a DSLR camera.Thus, observing in degree view or at a 90° angle is possible. The carrying handle attached to the tube clamps ensures a secure hold when transporting the telescope.FEATURESObjective Lens: D=81 mm, multi-coated 2-Lens SD Apochromat without spacer plates No more spikes on the stars Focal Length: 625 mm (f7.7) Resolution and visual limit: 1.43 arcseconds; 11.3 Mag Light gathering capacity: 134x unaided eyesDimensions and weight: 90 mm dia x 585 mm, 3.6 kg Finderscope: XY Red Dot Finder II Adapter and connections: Adapter thread 60 mm and 31.7 mm for T2-ringConnection 50.8 mm and 31.7 mm socket with flip-mirror diagonal mirrorPhotography: primary focus and eyepiece projection SCOPE OF DELIVERY Refractor telescope SD81SII Tube rings Flip mirror system Carrying handle Dovetail rail Red dot viewfinder

Available

£1,049.00* £1,349.00* (22.24% saved)
Skip product gallery

Customers also bought

%
Vixen extension sleeve 42–50.8 mm
Vixen extension sleeve 42–50.8 mm
Eyepiece adapter 42 mm to 50.8 mmFEATURES Adapts 42-mm T-threads for 50.8-mm eyepiece mounts Compatibility: Can be used on flip mirrors to mount 50.8-mm eyepieces Weight: 60 g

Available

£34.00* £42.00* (19.05% saved)
Vixen 60 mm extension tube
Vixen 60 mm extension tube
This extension tube extends back focus depth to an additional 66 mm, for Vixen 60mm diameter focusers. It is suitable for extending compatible focuser drawtubes for use visually without a Star Diagonal but most commonly extends focus travel for astrophotography in a prime focus position, or for straight-through use with Barlow lenses and other accessories. FEATURES Compatibility: all Vixen OTAs with 60mm diameter drawtubes Weight: 115g SCOPE OF DELIVERY Extension tube 60 mm

Available

£31.00*
Vixen finder scope 7x50 with crosshairs and illumination
Vixen finder scope 7x50 with crosshairs and illumination
Thanks to the large aperture of 50 mm, the Vixen 7x50 finder scope immediately reveals many objects that are not visible in smaller viewfinders. This makes it easy to adjust the telescope to the target object. The red illumination of the finder scope can be dimmed to different levels.The eyepiece is detachable (31.7 mm diameter) so that a CMOS camera with 31.7 mm diameter (available separately) can be attached and used as an autoguider. The eyepiece unit with crosshairs is also removable in order to use 31.7 mm diameter eyepieces (sold separately) with different focal lengths. This allows the finder scope to be operated with various magnifications.The lens is designed to be compatible with CMOS cameras. The distance between the bottom of the 31.7 mm sleeve on the camera side and the sensor surface should be approximately 17 mm. However, the focus position may vary depending on the camera, so you should adjust the guiding camera for focus before use. The focus of the optics is adjusted by rotating the lens. First, the black lock ring on the main optics must be loosened. Then, the focus can be adjusted by turning the lens mount. Please also read the operating instructions for the viewfinder and the CMOS camera used.If the focus of the viewfinder has been adjusted, the focus position must be readjusted when using the eyepiece unit.FEATURESMagnification: 7xAperture: 50 mmLenses: coatedCrosshairs: illuminated in red, dimmableDimensions: 220 mm × Ø 58 mmWeight: 467 gSCOPE OF DELIVERY7x50 viewfinderEyepiece unit with illuminationCR2032 batteryInstruction manual

Available

£149.00*
Vixen SX 60 mm to 50.8 mm adapter sleeve
Vixen SX 60 mm to 50.8 mm adapter sleeve
The Vixen SX 60 mm to 50.8 mm adapter sleeve can be screwed on to the thread of a 60-mm focuser for connectionto a 50.8-mm (2") sleeveFEATURES Adapts 60-mm focusers for 50.8-mm eyepieces or flip mirrors. Compatibility: All Vixen OTAs with 60-mm connection Length: 10 mmWeight: 65 gPACKAGE CONTENTS60 mm to 50.8 mm adapter sleeve

Available

£31.00*
EXPLORE SCIENTIFIC Deep Sky Astro Camera 26MP
EXPLORE SCIENTIFIC Deep Sky Astro Camera 26MP
High resolution deep sky camera with large SONY EXMOR IMX-571 APS-C CMOS sensor and active cooling. This camera's extreme sensitivity is achieved through SONYs backside illumination technology. This camera should appeal to both advanced users and those looking to move up from DSLRs for more serious deep sky imaging.Enter the world of astrophotography now. With the new EXPLORE SCIENTIFIC Deep Sky Astro camera you get a modern complete package for straightforward shooting of astro photos and videos. Finally, an easy-to-use camera for capturing galaxies, star clusters, the moon and even planets with high resolution and low sensor noise. Thanks to the fast USB 3.0 computer interface, all image data is transferred within a few seconds. Long waiting times for images are now history. Simply connect the camera to your telescope using the T2 female thread (M42, 0.75 mm) or the supplied 2" (50.8 mm) plug-in adapter and after installing the drivers and the included EXPLORE Capture recording and editing software, you are ready to take the first real astro photos with a highly specialized camera for your application.  The EXPLORE Capture Pro software included in this package not only offers the basic functions required for image and video capture, but also many helpful special functions for image post-processing and camera setup. Functions such as live image display, exposure settings, white balance, dark image subtraction, stacking, timelapse recording and much more can be configured individually. This very sophisticated software makes your entry into astrophotography really easy. With the automatic settings you can produce absolutely presentable results without any previous knowledge. As soon as you feel confident, simply switch off the automatic settings and gradually explore the software's more individual professional settings. The new EXPLORE SCIENTIFIC Deep Sky camera has a highly sensitive and very low-noise SONY EXMOR IMX-571 APS-C CMOS Sensor, which can be cooled down to 40 °C below ambient temperature by the two-stage thermoelectric cooling. In contrast to normal DSLR cameras, this guarantees much lower noise and fewer hot pixels in your shots. The images are not only much sharper and more brilliant, but also contain more usable image information. Through the carefully automatically-controlled setting of the desired camera temperature, the it's easy to create of dark frames which can be re-used under similar shooting conditions - speeding up your processing considerably. The large-format CMOS sensor with 28.3 mm diagonal also allows large image fields and simplifies the adjustment and centering of objects considerably. The secret to the high light sensitivity of this camera is SONY's new back illuminated EXMOR CMOS sensor. It increases the quantum efficiency to up to 80 % at 533 nm, which leads to an extremely high sensitivity and subsequently particularly bright and high-contrast photos.The camera has a built-in USB hub with 2 x USB 2.0 ports at the rear. Connect your additional autoguider camera or motor focus etc. via a short USB cable and reduce the risk of cable tangles and cable breaks. Separate cable connections between your accessories and your computer are no longer necessary. A sturdy hard case for the camera plus accessories is also included. IMPORTANT NOTES: Don't get confused by the megapixel data and the contrary price structure. In the field of astronomy, the key criterion is not the sensor resolution but the maximum light sensitivity. The main goal is to capture as much light as possible in a short time.DOWNLOAD latest camera software and drivers see download folder "Manuals" or here: https://www.touptek-astro.com/downloads Sample photos made by Lóránd Fényes in Hungary: https://fenyeslorand.hu/m31/https://fenyeslorand.hu/ic349_merope_nebula/https://fenyeslorand.hu/asztrofotok/Field of view for different focal lengths in arc minutes and degrees: 400 mm - 201´ x 135´  (3.4 x 2.3 degrees)500 mm - 161´ x 108´  (2.7 x 1.8 degrees)600 mm - 134´ x 90´  (2.2 x 1.5 degrees)700 mm - 115´ x 77´  (1.9 x 1.3 degrees)800 mm - 100´ x 67´  (1.7 x 1.1 degrees)900 mm -  89´ x 60´  (1.5 x 1.0 degrees)1000 mm - 80´ x 54´  (1.3 x 0.9 degrees)1250 mm - 64´ x 43´  (1.1 x 0.7 degrees)1500 mm - 53´ x 36´  (0.9 x 0.6 degrees)1750 mm - 46´ x 31´  (0.8 x 0.5 degrees)2000 mm - 40´ x 27´  (0.7 x 0.45 degrees)FEATURESCamera type: ASTRO Colour Camera 26.0MP ATR3CMOS16000KPA Data output: single pictures and video Image Sensor: SONY EXMOR IMX-571 CMOS Colour Sensor Adjustable resolution: 6224x4168 / 3104x2084 / 2064x1386 Adjustable binning: 1x1 / 2x2 / 3x3 Frame rate per second (FBS): 6.8 / 28 / 63 Physical sensor size in pixels: 6224 x 4168diaginal: 28.3 mmMegapixel: 26 MP Sensor size: 23.48 x 15.67 mm (APS-C format)Pixel size: 3.76 µm x 3.76 µm Bit depth: 8 Bit / 16 BitBackfocus: 17.5 mm  Shutter Type: rolling shutterInternal camera memory: 512MB DDR 3 RAMThermoelectric cooling with fan: yes, up to 40°C below ambient temperature Adjustable exposure times: 150µs to 60min Operating temperature: -10 to +50°C (30-80% RLH) Cable length USB 3.0: 150cm DC cable length power supply: 200cm CNC machined aluminium housing Camera diameter: 80mm; length: 102mm Camera weight: 0.53 kg Camera connection diameter: 2.0 inch ( 50.8mm) Camera connection thread: T2 (M42x0,75mm) Filter thread: Yes, 2.0 inch in receptacle Camera connection to PC: USB 3.0 Built-in USB hub with 2 x USB 2.0 ports Power supply: Power supply 12 Volt 3,0 Ampere included Software: EXPLORE Capture included Camera driver and ASCOM driver includedOperating system: WINDOWS 10 + 11 PC requirements: CPU Intel Core2 2.8Ghz or higher / 2 GB Ram / USB 3.0 WHAT'S INCLUDEDDeep Sky Astro Camera 26.0MP Telescope adapter T2 thread to 2.0" (50,8mm) USB 3.0 connection cable 150cm Power supply 230V/12V 3.0A Dust cap Software CD Hard case Instruction manual

Available

£1,495.00*
Vixen SX dovetail adapter
Vixen SX dovetail adapter
The Vixen SX dovetail adapter is used to attach a telescope to a mount. Tube clamps are also required for this and are connected to the dovetail adapter. Suitable for use on GP and SX mounts, as well as various other mounts with a Vixen standard dovetail mount.FEATURESFor attaching telescopes to mounts with Vixen connectionSuitable for all SX, Porta and GP mountsWeight: 160 gPACKAGE CONTENTSVixen SX dovetail adapterScrew setAllen key

Available

£19.00*
Skip product gallery

Customers also viewed

%
EXPLORE SCIENTIFIC 10x60 Finder and Guider Scope with Helical Focuser, 1.25inch and T2 connection
EXPLORE SCIENTIFIC 10x60 Finder and Guider Scope with Helical Focuser, 1.25inch and T2 connection
Universal 60mm viewfinder and guide telescope with a focal length of 250mmExcellent 10x60 viewfinder telescope with removable eyepiece unit and crosshairs with adjustable red illumination. The larger aperture and focal length, provide an even brighter field of view and more accurate tracking due to the higher resolution. The precise helical focuser and the 1.25 inch /31.7mm plug-in connection, as well as the T2 camera connection thread (M42x0.75mm), allow the autoguiding required for long time exposure to obtain a point-shaped star image. It can also be used as a mini travel telescope.High quality 10x60 viewfinder telescope with adjustable crosshair illuminationImage sharpness and viewing characteristics lift this viewfinder well above the level of the usual 10x60 viewfinder scopes. The visible image is bright and crisply sharp. Furthermore, this viewfinder has a very large field of view (FOV) of 6.0 degrees. This makes finding and adjusting objects much easier. The existing scale markings (pitch=0.85 degree) on the crosshair are a good reference for estimating distances, and the open centre markings also make it easier to centre objects precisely. All lens surfaces are protected against weathering by multi-coating and guarantee a bright viewfinder image due to the high light transmission values. The adjustable red LED illumination unit is powered by two LR41 coin batteries. The main lens and the crosshairs can be focused independently of each other, giving you perfect focus for your eyes.Compact tracking unit for autoguidingOne of the main applications for this telescope is the so-called autoguiding. Here the usually larger photo-taking optics are actively corrected by a smaller guiding telescope with a second tracking camera. This means that the mechanical fluctuations in the tracking accuracy, which are present in all astronomical telescope mounts, are measured by the tracking camera and compensated accordingly. This is necessary in order to obtain a point-shaped star image on the astrophotos during long time exposures and to avoid unwanted star trails. For this purpose, the guiding telescope is inserted into the existing viewfinder shoe of the photo-taking optics and aligned parallel. If the existing viewfinder shoe is not compatible, a suitable viewfinder shoe is also included. With the 1.25 inch / 31,7mm plug connection at the rear end or via T2 thread connection (M42x0,75mm), a tracking camera can be mounted afterwards. This is held securely by a brass ring clamp and 3 clamping screws. Please note the required back focus for your tracking camera. The focal plane (backfocus) is approx. 22mm behind the T2 thread. The sensitive focusing on the guiding star is done by a large knurled wheel of the mechanically precise manufactured helical focuser. For easy reproduction of the point of focus, this has a white millimetre scale from 0 to 28mm, which is attached by laser engraving. After the tracking camera has been connected directly or via computer to the telescope mount and the necessary basic settings have been made, the first astrophotos with long time exposure can be taken.Use as mini travel telescopeThis viewfinder and guide telescope can also be used quite simply as a mini travel telescope. With the optional eyepieces, a magnification of 9x to 50x can be achieved. Nearly all eyepieces with a focal length of 5 to 26mm and 1.25 inch/31.7mm plug connection are suitable. Especially recommended are the EXPLORE SCIENTIFIC eyepieces of the 52 degree (Art. 02195xx) and 62 degree (02196xx) LER series. Note: Only straight view use is possible.Metal viewfinder holder and viewfinder shoeThe mount of this viewfinder and guide telescope is completely made of aluminium and is a stable base. The viewfinder mount is suitable for many common types of telescopes, such as EXPLORE SCIENTIFIC, BRESSER MESSIER etc. If the existing viewfinder shoe is not compatible, a matching viewfinder shoe is also included. This can be attached to the telescopic tube by means of four M5 screws. The bore distances of the viewfinder shoe are 31.7mm on the longitudinal and transverse axis. The six large adjustment screws with non-slip knurling make it easy to align the viewfinder, even with clammy fingers. All adjusting and clamping screws have plastic tips that effectively prevent the viewfinder housing and viewfinder mount from being scratched.FEATURESExcellent 10x60 viewfinder and guiding telescopeCan also be used as mini travel telescopePerfect image sharpness and good viewing comfortFMC Multi-coated lens surfacesLens focal length: 250mmMax. possible camera weight: 550gRemovable eyepiece/cross hair unitCamera connection via 1.25 inch / 31.7mm plug connection or T2 threadT2 thread: M42 x 0,75mmPrecise helical focuser for focusing the visible imageFocuser travel range: 28mmClose focus distance: 3 mLaser engraved millimetre scale from 0 to 28mm on the focuserFocal plane (backfocus) is approx. 22mm behind the T2 threadSeparate focusing of the crosshair at the eyepieceVery large field of view FOV of 6.0 degreesWith adjustable red cross-hair iillumination Scale markings crosshair with 0,85 degree graduationPower supply of illumination unit: coin battery type LR41 (2pcs)Brass ring clamp and 3 clamping screws on the 1.25 inch plug connectionWith optional eyepieces magnifications from 9x to 50x can be achievedSuitable are almost all eyepieces with 1.25 inch/31,7mm shaftMounting of the viewfinder telescope is completely made of aluminiumViewfinder mount with 6 large adjustment screws with knurled head for easy gripFinder shoe suitable for EXPLORE SCIENTIFIC, BRESSER MESSIER etc.Additionally a suitable viewfinder shoe is includedBore distances of the viewfinder shoe are 31.7mm on the longitudinal and transverse axisAdjusting and clamping screws have plastic tipsWHAT'S INCLUDED10x60 viewfinder/guiding telescopeEyepiece unit with crosshairCrosshair illumination unit incl. batteriesViewfinder holder with viewfinder shoeInstruction manual

Available

£149.00* £239.00* (37.66% saved)