Vixen counterweight 3.7 kg

AP clamping lever for the AP mount axesThe friction control mechanism (slip clutch) can be secured in place with the AP clamping lever. FEATURES Clamping lever for use in combination with Vixen AP modules Dimensions: 23 mm x 33 mm x 31 mm Weight: 10 g DELIVERY CONTENT 1x clamping lever

Each dew shield threads into the front lens cell and effectively inhibits the formation of dew on the lens surface in humid/cool observation conditions. Reduces reflections caused by scattered light incident from the side. Protects the front lens from accidental contact and scratches.FEATURESPrevents fogging of the front lensReduces reflections caused by stray lightProtects the front lens of the telescopeUse in humid/cool conditionsSuitable for BRESSER MCX127/MC127 telescopesEasy to screw into the telescopic tubeLength: 120mm , weight: 160gSCOPE OF DELIVERYDew cap, 1 piece

Counterweight bar, which is delivered with the AP-mount and AP-SM mount. It is designed for balancing an optical tube after being secured with a counterweight and installed on the declination body. It can used with the APZ Alt-Az mount.FEATURES Diameter of bar: Diameter: Dia. 20 mm Dimensions: 78×328 mm Effective bar length: 269 mm Weight: 820 g Compatible counterweights: 1 kg, 1.9 kg, 2.8 kg, 3.7 kg

With the 1.9 kg counterweight, heavier optical tubes can be balanced on many Vixen mounts. COMPATIBLE WITH THE FOLLOWING VIXEN MOUNTS SX SX2 SXD SXD2 SXP GP2 GPD2 SCOPE OF DELIVERY 1x 1.9 kg counterweight

The AP mount provides a secure, stable support for your telescope. Thanks to the slip clutch mechanism, the mount can be adjusted quickly to the target object. There is a wide range of optional accessories. The ADVANCED POLARIS mount is perfect for both beginners and advanced observers who require a lightweight travel mount. STYLISH DESIGN The AP mount features an ultra-smooth finish without any projecting parts. Simply place your telescope on the mount and move it to the desired celestial object without having to loosen any clamps! QUICK POLAR ALIGNMENT The slip clutches allow you to adjust the telescope to your target object easily – no more searching for adjustment clamps in the dark! An optional polar meter is available, which enables you to locate the celestial pole when it is hidden by trees or buildings. OPTIONAL POLAR FINDER SCOPE The innovative polar finder scope provides a new way to polar align your telescope. Simply align the stars in the crosshair reticle with the same stars in the night sky. Polar alignment is achieved using 3 reference stars. The polar finder is illuminated to facilitate orientation and switches off automatically after 3 minutes to save battery power. OPTIONAL POWER SUPPLY The RA and DEC motor modules are powered by four AA alkaline, Ni-MH or Ni-CD batteries. The RA motor module has a USB Micro-B port for an external power supply. A USB power pack or car charging cable can be used for longer observation sessions. OPTIONAL STAR BOOK ONE CONTROLLER The STAR BOOK ONE is a multifunctional and intuitive controller that tracks in the RA and DC axis with a range of different speeds. The tracking options are designed for time lapse cameras at a wide range of speeds, including sidereal, lunar and solar rates. The controller also offers many useful functions such as backlash compensation, autoguider port, PEC and a built-in red LED light. The STAR BOOK ONE controller is designed for the AP-SM mount and is an integral part of the RA motor module. NOTE The STAR BOOK ONE controller is not sold separately but is only available with the Motor Module Set! FEATURES R.A. Worm wheels: 58.4 mm Ø gear wheel with 140 teeth DEC. Worm wheels: 58.4 mm Ø gear wheel with 140 teeth Azimuthal adjustment: Twin adjusting screws Altitude adjustment: Twin adjusting screws Number of ball bearings: 7 Polar finder: Optional Motors: Optional Tracking: Manual fine adjustment Counterweight bar: 20 mm WHAT’S INCLUDED AP mount 1.0 kg counterweight

This Vixen 90° mirrored Star Diagonal, with 1.25” / 31.7 mm nosepiece connection, makes observing objects higher up in the sky much more pleasant and also allows the user to revolve an eyepiece to a more comfortable observing position. This star diagonal is a good quality option and compatible with a large array of refractors and Cassegrain design instruments. It will accept 1.25” / 31.7mm eyepieces and accessories and also has a threaded nosepiece, into which can be fitted 1.25” filters, or Barlow elements, saving you the bother of having to keep swapping these when using different eyepieces. The inside of the diagonal is blackened to minimise internal reflections and light scatter and the body has a pleasingly well-engineered feel to it, without being too weighty. Eyepieces and other accessories are held in place by a simple-to-operate knurled set screw. As this is a mirrored diagonal, it also corrects the up/down orientation of image in astronomical refractors and Cassegrain telescopes, but please note that left and right will still be inverted within the field of view. Not suitable for use with Newtonian telescopes. FEATURES Nosepiece diameter: 1.25” / 31.7 mm Weight: 124g Accessories: Protective dust capsWHAT'S INCLUDED1.25"/31.7mm Star Diagonal Protective dust caps