Vixen counterweight 2.8 kg

The ASTRO R-LITE red light flashlight is the ideal companion at night to read star charts or make adjustments to the equipment without losing the dark adaptation of the eyes. The ASTRO R-LITE offers 3 functions: Continuous light bright / Continuous light dark / Flashing. The large diffusing lens results in a very large and evenly illuminated light cone, which can also be adjusted by a sliding mechanism. By using a power-saving LED lamp, the battery life (1 x AA-LR6) is up to 100 hours. Of course, the robust lamp housing made of aluminium is splash-proof according to IPX4 and therefore particularly well suited for outdoor applications. The side cutouts on the front of the ASTRO R-LITE provide a 360° signal function. The 50 cm long carrying strap with quick coupling and an extra belt clip included in the scope of delivery ensure that the flashlight is always quickly at hand. The ASTRO R-LITE should not be missing in any equipment. FEATURES ASTRO R-LITE Red Light Flashlight Reading star maps at night Dark adaptation of the eyes is retained Continuous light bright / Continuous light dark / Flashing 360° signal function Large diffusing lens produces a uniformly illuminated light cone Carrying strap and belt clip included Battery life up to 100 hours - Battery (1 x AA-LR6) Splash-proof according to IPX4Robust lamp housing made of aluminiumSCOPE OF DELIVERYASTRO R-LITE Red Light Flashlight Carrying strap Belt clip Battery (1 x AA-LR6)

The laser-collimator makes aligning the mirrors of a Newtonian telescope simple, fast and precise. With the laser you collimate your optics even in the dark without additional accessories. Precisely machined it fits a 1,25" focuser without tilting. The built-in projection area enables collimating even long focal length scopes in a breeze. Suitable for Newtonian, Schmidt-Newtonian and Maksutov-Newtonian teleskopes. FEATURES31.7mm(1.25") Eyepiece Barrel Diameter Machined anodized aluminum housing with all internal surfaces coated non-reflective flat blackBuilt in laser collimatableIMPORTANT: Laser products have to be kept out of reach of children!

With the 3-piece lens cleaning set you not only clean camera or binocular lenses, but also spectacles glasses and displays and screens of smartphones, laptops, tablets, etc. thoroughly and safely. When cleaning high quality optical lenses, you have to be very careful. After all, it would be very annoying to successfully remove the dust but leave a scratch behind. With the lens cleaning pen you can safely clean optical and coated glass. With the brush on one side you can remove coarser dirt before polishing the lenses with the other side. Just blow away fluff with the bellows. FEATURES complete set for safe cleaning of camera lenses bellows for removing coarse dirt particles and fluff without scratching the lens lint-free microfibre cloth approx. 14,5x14,5cm lens cleaning pencil for safe cleaning of optical and coated glass SCOPE OF DELIVERY 1x bellows 1x lens cleaning pen 1x microfiber cloth

Each dew shield threads into the front lens cell and effectively inhibits the formation of dew on the lens surface in humid/cool observation conditions. Reduces reflections caused by scattered light incident from the side. Protects the front lens from accidental contact and scratches. FEATURES Prevents fogging of the front lens Reduces reflections caused by stray light Protects the front lens of the telescope Use in humid/cool conditions Suitable for BRESSER MCX127/MC127 telescopes Easy to screw into the telescopic tube Length: 120mm , weight: 160g SCOPE OF DELIVERY Dew cap, 1 piece

300 mm adjustment shaft with flexible design for comfortable observations with the Porta II and the Mini Porta.The large adjustment knobs allow you to make smooth, fine adjustments to the axles.Also compatible with a wide range of other mounts from other manufacturers.FEATURESComfortable tracking by handLarge adjustment knobs for fine tuningDesigned for wide range of mountsLength: 300 mmDELIVERY CONTENT300 mm adjustment shaft

The Vixen dew cap heater prevents your optics from fogging up due to dew.A must-have accessory for cold and damp nights.FEATURES Consumption: 16.2 Ohm (12 V, 8.9 W) Dimensions: 655 mm long heater with 2.2 m cable Connection: 2.1 socket with medium-negative polarity Weight: 120 g DELIVERY CONTENT Battery box Vixen dew cap heater

Additional counterweight to balance heavy accessories etc.

The 360 IV Lens Heater is designed to prevent camera lenses and telescopes from fogging up due to dew. It is also well suited for eyepieces.The heating element is a carbon fiber heater with a high thermal efficiency. The textile heating element provides great flexibility compared to other heating materials. The power cord (USB cable) has a particularly high flexibility to be still elastic at low temperatures. A very flexible Velcro tape allows for quick and easy attachment to and removal from the lens. The tape can be easily removed from the lens without pulling tightly. The heating tape has a very low power consumption and can be operated with a 10,000 mA battery for up to 14 hours.The Vixen Lens Heater 360 IV in detailWhen moisture in the air comes into contact with an object whose temperature is lower than the ambient temperature, small drops of water form - so-called dew condensation. Astrophotography often suffers from such lens fogging and the photo turns milky. Because the temperature and humidity change during the night and the camera becomes cooler than the ambient temperature, it is important to warm the objective's or telescope's lens by using heaters to prevent it from fogging. We recommend using the Lens Heater 360 IV when you want to do astrophotography or night photography on the coast, in the mountains or in cold regions. The heating elements are made of carbon fibers with improved heating performance, introduced for the fourth generation Vixen Lens Heater 360 IV. They efficiently keep the lens warm and fog-free with minimal power consumption. The heater temperature reaches 10 degrees Celsius above the ambient temperature (at 20 °C outside temperature and no wind). However, it varies according to influences in the environment. For power supply the lens heater is equipped with a detachable coiled cable (USB Type-C), up to 50 cm long. The 360 IV lens heater consumes only 2.5 W of power (5 V - 0.5 A). With a portable USB battery of e.g. 10,000 mA, it can operate continuously for about 14 hours (at 20 °C outdoor temperature). However, the operating time varies greatly depending on the environment and temperature. The soft and non-slip surface of the heating tape allows for easy attachment to the objective, eyepiece or telescope. The heater consists of a 30 mm wide and 600 mm long heating tape and is suitable for diameters up to 100 mm.FEATURESHeating type: carbon fiber textile heatingTemperature: 10 degrees Celsius above ambient outdoor temperature (at 20° C, no wind)Power source, power consumption: USB, 5 V, 0.5 A, 2.5 WPower cable: USB A (male)Connector: USB type C connector detachable coiled cable 20 to 50 cmOperating time: approximately 14 hours with fully charged 10,000 mAh battery (at 20 °C outdoor temperature)Recommended for lenses with a width of 30 mm and an outer diameter of 45 to 100 mmDimensions: 30 x 600 mmTotal weight: 67 gSCOPE OF DELIVERYLens Heater 360 IVUSB spiral cable

Additional counterweight to balance heavy accessories etc.FEATUREScolor matched with the Bresser EXOS-1/2 seriessuitable for counterbalance bar with 20mm diameterSCOPE OF DELIVERY1x counterbalance 2.0kg

This carrying handle is suitable for installation on BRESSER MESSIER 6, 8 and 10 inch Dobson telescopes. In combination with the optionally available prism rail (GP standard) Art. No. 4940140, these Dobson telescope tubes can be used on any telescope mount with the appropriate carrying capacity. A comfortable transport of the tube is guaranteed by the mounting in the center of gravity. The carrying handle is also suitable as a spare part for all other MESSIER telescopes. FEATUREScarrying handle for 6 , 8 and 10 inch MESSIER Dobson telescopeswhen using telescopic tubes on EQ mountsconvenient transport due to central assemblythe assembly is carried out on the original tube ringsalso suitable as spare part for all MESSIER telescopesassembly material and tools includedlength: 190mm; Width: 30 mm; Height: 38 mmbore spacing: 160 mm; Bore diameter: 6.5 mm SCOPE OF DELIVERYcarrying handlemounting screws (2 pieces; 1/4 inch)hex wrench tool (3/16 inch)

Universal dovetail clamp suitable for all optical tubes which are equipped with a standard 44mm dovetail rail (Messier/ES/GP/Vixen).  Also a screw kit is included for mounting the dovetail clamp direct on the top of the handle of all BRESSER Messier und EXPLORE-SCIENTIFIC telescopes. Thus a parallel mounted guiding telescope can be set up very easy and enables long exposure astrophotagraphy with autoguiding.  The prism clamp has 2 x 6mm countersunk holes (35mm hole spacing) and 3 additional 1/4" photo tapped holes at 120 degrees angular distance on a pitch circle diameter of 55 mm to allow a versatile adaptation to a variety of other telescopes and adapter plates.FEATURESUniversal dovetail clamp  Suitable for 44mm dovetail rail of Messier/ES/GP/Vixen  Screw set for Messier/ES handle included For piggy-back mounting of a guiding telescope Enables astrophotography with autoguiding CNC machined Aluminum Additional 1/4" photo thread holes available SCOPE OF DELIVERY Dovetail clamp Screw set (2pcs M6x25mm)

The counterweight rod is attached to the dovetail rail using a 1/4 inch photo screw. It is compatible with the Vixen counterweights 1.0 kg, 1.9 kg, 2.8 kg and 3.7 kg and is used to balance the AP Photoguiders, the Polarie or the Polarie U Star Tracker. PROPERTIES Shank diameter: 20mm Size: diameter 23x135mm Effective length of the counterweight rod: 130mm Weight: 330g WHAT'S INCLUDED Counterweight rod Locking screw