Vixen APP-TL130 Tripod for AP, GPD & SX Mounts

The AX103S is a top-of-the-range ED apochromat in the refractor series. It features a triplet ED object lens and a rear-mounted field-flattener lens. The f8.0 refractor contains a central ED lens in the objective and reduces chromatic aberration to an absolute minimum. An optional focal reducer can reduce the aperture ratio to 1:5.6 in order to provide quicker results for astrophotographers. The built-in field flattener lens provides a sharp image across the entire field of view – an essential requirement in astrophotography. The 60 mm ring on the focuser allows you to attach a 2’’ eyepiece or accessories and a camera adapter. The AX103S is specially designed for photography, but also offers stunning visual performance, especially for observing the moon and the planets. The AX 103S is corrected for full frame photography and provides razor-sharp pictures right into the corners of the image field. This telescope is guaranteed to provide a lifetime of outstanding performance! FEATURES Optimized for full frame photography Fully coated triplet ED objective with flattener Very high sharpness and contrast Optional reducer availableBackfocus without Reducer: 150.0 mmBackfocus with Reducer: 63,5 mm103 mm aperture and 825 mm focal length WHAT’S INCLUDED Telescope Tube clamps and carry handle Illuminated 7x50 viewfinder telescope Vixen's very useful Flip mirror diagonal system for finding and framing targets

Safe and convenient bag to transport your OTA or tripod to your observing site. Holds many size tubes. Wrap the optical tube in the protective cloth with Velcro tape and secure it to the wall inside the carrying bag. Includes 2 accessory pouches to store a finder scope and flip mirror. Reflective tape on the carry strap increases visibility at a dark site.Suggested tubes and tripods: A80M ; A80Mf ; A70Lf ; ED103S; AX103S ; SXGHAL130 and SXG-AL130 TripodFEATUREScarry bag for tubes & tripod maximum optical tube size: 850x125mm (L&W)reflective tape on handles prevent lossSCOPE OF DELIVERY1x Vixen Carry Bag2x accessory pouches

The soft padded Vixen accessory bag can be attached to a tripod, keeping your accessories close at hand. The bag is exactly the right size for the Polarie U Star tracker. But also other accessories, such as a camera lens, batteries or the remote control of your camera can be stored safely and within reach in this soft bag. The neoprene material, which absorbs shocks excellently and offers good thermal insulation, protects your accessories extremely well. and protects your batteries and USB battery packs from extreme cold. FEATURESAccessory bag for attaching to a tripod Perfect fit for the Polarie U Star Tracker Suitable to keep all kinds of accessories clos at hand Material: neoprene, polyester Dimensions: 11 x 13 cm Weight: 95 g SCOPE OF DELIVERYTripod accessory bag Fastening strap

​Vixen finder shoe for attaching a Vixen-profile finder bracket to your telescope (also works with many other finder brackets).PROPERTIESVixen standard connectionFixing with two screwsWHAT'S INCLUDEDVixen finder shoeFastening screws

Vixen’s latest design of polar finder, allows a simple, hassle-free method of polar alignment. The Vixen Polarscope PF-L II for AP & SX mounts has a reticule showing the Pole star (Polaris) and two other stars (Delta UMi and 51 Cep) in their precise positions. By turning the Polarscope you can easily match the reticle with the asterism of these stars in the sky and mechanically adjust your mount’s azimuth and altitude axes to align to the true North Pole. You can then adjust the Polar star to a more precise alignment using the reticule’s year marking (which runs from 2015 to 2040, but in practise can be used much longer after this) . Using this alignment process, with visual reference to the actual stars in the sky, a complicated alignment, using date and time to calculate Polaris offset from the pole is unnecessary. For alignment in the Southern Hemisphere you simply use the Trapezium asterism (Sigma, Chi, Tau and Upsilon Octantis) of the constellation Octans and position the reticule with the trapezium stars aligned to their marked positions. The Polarscope has built-in LED illumination, which is dimmable in many stages, and ensures an automatic shut-off after 2 minutes, saving your battery life. The PFL-II also has an improved edge sharpness, when compared with its predecessor. FEATURES Lighting: LED illumination, with automatic shut-off Power supply: 3v button cell Accuracy: ≤ 3 arc minutes Dimensions: 47 x 55 x 127 mm Weight: 155g Compatibility: Vixen AP, SX, AXJ, AXD Mounts SCOPE OF DELIVERY PF-L II Allen key Battery CR2032 3v

Designed as a complement to the AXD2 equatorial mount, the AXJ mount offers outstanding durability and precision. The AXJ mount can also be used on AXD-TR102 tripods with an adapter. Periodic errors on mounts are usually measured and corrected by the user. Unlike the old StarBook controller, the STAR BOOK TEN controller saves these errors permanently. The periodic error of the mount is measured in the factory (total of 12 points per 30 degrees worm gear) and corrected before delivery. This is known as V-PEC and functions automatically as soon as you use the mount. It delivers an accuracy of +/- 4.0 arc seconds. You can increase the tracking accuracy further by saving your own recorded periodic errors. Vixen uses a new Belt-drive system in the AXJ mount. The gear drive was replaced with a toothed belt drive. This gives the mount a quicker reaction time and lower backlash. It also helps to minimize noise. The 6x20 polar finder scope is pre-installed. This allows the user to configure the polar alignment (for both the northern and southern hemispheres). The polar finder scope has a variable illuminated reticle with an automatic power-off function. The brightness can be adjusted in 8 levels so that the user can configure the desired brightness. SETTING ACCURACY OF LESS THAN 3 ARC MINUTES The dark field illumination (red LED) turns on when the push button is pressed. The reticle also lights up in red so that the observer can recognize and align stars in the background of the reticle. The light turns off automatically after a few minutes to save battery power. 2 bearing sets (4 pieces) are used for the shaft of the RA axis. Thanks to the newly developed EQ design, the ZXJ mount has a higher load capacity of 22 kg. As the motors, worm shaft and worm gear are located in the lower part of the mount, fewer counterweights are required than with conventional mounts. The STAR BOOK TEN controller is a modern control system with a high-resolution colour monitor. The STAR BOOK TEN system contains more than 272,000 celestial objects, including 260,000 stars from the SAO catalogue, 109 Messier objects, 7840 NGC objects and 5380 IC objects, as well the soon, moon and planets. Objects can be accessed by name, and information such as images and data can be defined separately. FEATURES +/-4.0 arc seconds with V-PEC V-PEC (Vixen-Permanent Periodic Error Correction) Belt drive system (prevents backlash and minimizes noise) 14 ball bearings Polar alignment (variable fork fix type) Polar finder with reference star alignment STAR BOOK TEN controller with autoguider input Retractable counterweight bar WHAT’S INCLUDED AXJ mount Starbook Ten controller 2 counterweights (3.7 kg and 1.5 kg) GoTo mount with Star Book Ten controller 22 kg load (photographic)

Made in Japan and designed for astrophotography, this premium extender lens system converts the R200SS parabolic mirror Newton reflector into an F5.6 astrograph. The Extender PH kit was developed to increase the focal length by a factor of 1.4x It increases the focal length of the 800 mm (F4) R200SS Newton reflector to 1120 mm (F5.6). The optical system structure of 4 elements in 3 groups corrects the coma error to render sharp images up to the edge of the field of view. The extender illuminates the field of a full-frame camera (44 image circle). When used in combination with the eyepiece adapter, the 31.7 mm eyepiece can be used for visual observations. The same anti-reflective AS coatings used on our high-end VSD 100 f/3.8 astrograph are also used here to provide an outstanding light transmission of 99.9% per lens surface. The completely matte surface in the interior keeps loss of light, ghosting and scattered light to a minimum. When used with the 50.8 mm eyepiece adapter, the extender PH kit provides a high-performance Barlow lens for visual observations and eliminates coma and aberrations over the entire field of view. FEATURES Magnification: 1.4x 1120 mm (f5.6) focal length from 800 mm (f4) AS coating (max. transmission rate of 99.9% per surface) Hood elements (3 groups, 4 elements) 44 mm image circle (36x24 mm format, covers the full-frame CCD image) Construction: 1x PH extender, 1x Extension tube 66 Filter size: 48 mm, filter is attachable Compatible optical lens barrel: R200SS Newton reflector Also suitable for visual observations (31.7 mm eyepiece, normally used with eyepiece adapter) Diameter: 56 mm x L: 128 mm Net weight: 245 g DELIVERY CONTENT Extender PH EX Extender 66 Dust caps