Vixen AP Clamp Lever

The 3.7-kg counterweight can be attached to the counterweight bar to balance your mount. Depending on the telescope, multiple weights may be required. The counterweight is suitable for Vixen SX, SXD, SXP2, GP2, GPD2 and AP mounts.FEATURESSuitable for SX, SXD, SXP2, GP2, GPD2 and AP mountsWeight: 3,700 gPACKAGE CONTENTS3.7-kg counterweight

This accessory includes a compass with a spirit level and a height scale. The compass helps you to quickly locate the polar star when it is hidden behind trees or a mountain. The compass attaches to the accessory shoe on the Polarie Star Tracker or a device with a camera accessory shoe. FEATURES Compass Oil-filled compass Azimuth dimensions: 1° steps Height adjustment: 5° steps (max. +/- 70°) Markings: marked with luminous paint Spirit level: Built-in spirit level DELIVERY CONTENTS QPL compass

The AP-SM mount is an enhancement of the AP mount. Unlike the AP mount, it has an RA motor and is equipped with the STARBOOK ONE controller. The AP mount provides a secure, stable support for your telescope. Thanks to the slip clutch mechanism, the mount can be adjusted quicky to the target object. There is a wide range of optional accessories. The ADVANCED POLARIS mount is ideal for both beginners and advanced observers who require a lightweight travel mount. STYLISH DESIGN The AP mount features an ultra-smooth finish without any projecting parts. Simply place your telescope on the mount and move it to the desired celestial object without having to loosen any clamps! QUICK POLAR ALIGNMENT The slip clutches allow you to adjust the telescope to your target object easily – no more searching for adjustment clamps in the dark! An optional polar meter is available, which enables you to locate the celestial pole when it is hidden by trees or buildings. OPTIONAL POLAR FINDER SCOPE The innovative polar finder scope provides a new way to polar align your telescope. Simply align the stars in the crosshair reticle with the same stars in the night sky. Polar alignment is achieved using 3 reference stars. The polar finder is illuminated to facilitate orientation and switches off automatically after 3 minutes to save battery power. POWER SUPPLY The RA and DEC motor modules are powered by four AA alkaline, Ni-MH or Ni-CD batteries. The RA motor module has a USB Micro-B port for an external power supply. A USB power pack or car charging cable can be used for longer observation sessions. STAR BOOK ONE CONTROLLER The STAR BOOK ONE is a multifunctional and intuitive controller that tracks in the RA and DC axis with a range of different speeds. The tracking options are designed for time-lapse cameras at a wide range of speeds, including sidereal, lunar and solar rates. The controller also offers many useful functions such as backlash compensation, autoguider port, PEC and a built-in red LED light. FEATURES R.A. Worm wheels: 58.4 mm Ø gear wheel with 140 teeth DEC. Worm wheels: 58.4 mm Ø gear wheel with 140 teeth Azimuthal adjustment: Twin adjusting screws Altitude adjustment: Twin adjusting screws Number of ball bearings: 7 Polar finder: Optional Motor: RA stepper motor Tracking: STAR BOOK ONE (max. 60x Slewing) Power supply: USB Micro-B Counterweight bar: 20 mm WHAT’S INCLUDED AP-SM mount 1.0 kg counterweight STARBOOK ONE controller

Safe and convenient bag to transport your OTA or tripod to your observing site. Holds many size tubes. Wrap the optical tube in the protective cloth with Velcro tape and secure it to the wall inside the carrying bag. Includes 2 accessory pouches to store a finder scope and flip mirror. Reflective tape on the carry strap increases visibility at a dark site.Suggested tubes and tripods: A80M ; A80Mf ; A70Lf ; ED103S; AX103S ; SXGHAL130 and SXG-AL130 TripodFEATUREScarry bag for tubes & tripod maximum optical tube size: 850x125mm (L&W)reflective tape on handles prevent lossSCOPE OF DELIVERY1x Vixen Carry Bag2x accessory pouches

The TELRAD viewfinder is a projection finder that can be installed on any telescope and makes it child's play to align the telescope with the starry sky.The TELRAD viewfinder is a practical alternative to classic optical viewfinders and illuminated red dot viewfinders. You can see the complete starry sky without magnification, and not just a small section as with a normal optical viewfinder. Against this background of the starry sky, three red luminous concentric rings are projected, with apparent diameters of 4 degrees, 2° and 0.5° in the sky. Move the telescope so that the object you are looking for is in the inner ring, and the telescope points in the right direction. Because the object you are looking for is inside the ring, it will not be irradiated like a normal illuminated red dot finder.The base of the TELRAD viewfinder is self-adhesive and can be mounted on all telescopic tubes from about 10cm diameter. The length of the base is about 18cm. This base remains on the telescopic tube, the TELRAD viewfinder itself can be removed or attached at any time by means of the attached quick coupling. The TELRAD is powered by two normal AA batteries (not included).There are star atlases, like the "Deep Sky Travel Atlas" from Oculum-Verlag, and planetarium programs for the PC, like the program "Stellarium", where the three rings of the TELRAD are already drawn or can be displayed around the interesting celestial objects. This makes finding these celestial objects a real walk.FEATURESTELRAD projection finderIlluminated rings of 4 degrees, 2° and 0.5° in the skySee the complete starry sky without magnificationEasy installation and useCan be installed on nearly every telescopesBase with quick release coupling included Powered by two AA batteries (not included) Very long battery life because of LED technologySCOPE OF DELIVERYTELRAD viewfinder with projector and battery compartment TELRAD base with quick-release coupling for the viewfinder Adhesive tape for attachment to telescope

300 mm adjustment shaft with flexible design for comfortable observations with the Porta II and the Mini Porta.The large adjustment knobs allow you to make smooth, fine adjustments to the axles.Also compatible with a wide range of other mounts from other manufacturers.FEATURESComfortable tracking by handLarge adjustment knobs for fine tuningDesigned for wide range of mountsLength: 300 mmDELIVERY CONTENT300 mm adjustment shaft