Vixen 60–50.8-mm adapter sleeve for R200SS

The Vixen 60–50.8-mm adapter sleeve adapts the 60-mm connection of a Vixen focuser to a 50.8-mm eyepiece connection and allows a mark I–III coma corrector to be connected to a R200SS Newton

  • Adapts a 60-mm connection to a 50.8-mm eyepiece connection
  • Compatibility: All Vixen OTAs with 60-mm connection
  • Adapter can be used on both sides with thread for coma corrector
  • Length: 13 mm or 34 mm
  • Weight: 66 g

£38.00*

Available, delivery time: 1-3 days

Product number: X002325
EAN: 4955295372508
WEEE-Reg.-Nr.: DE 34323861

With BRESSER, you can enjoy a smooth introduction to the vast world of astronomy. Our detailed information ("Telescope Guide") provides valuable tips for beginners—but even experienced astronomers can use the information we provide (e.g., tables for the geographical latitude of all major world cities) as a reference.

Here is the table of contents of the comprehensive BRESSER Telescope Guide:

Sky Guides by Bresser

The Sky Guide provides comprehensive information on constellations, planetary positions, and astronomical events – perfect for planning your observations and delving deeper into astronomy.
Visit the guide directly here to make the most of your observations!
Product information "Vixen 60–50.8-mm adapter sleeve for R200SS"
The Vixen 60–50.8-mm adapter sleeve can be used to adapt the 60-mm connection of a Vixen focuser for a 50.8-mm eyepiece connection. This also allows a mark I–III coma corrector to be connected to a R200SS Newton telescope.

FEATURES
  • Adapter ring 60 mm to 50.8 mm
  • Adapts 60-mm focusers for 50.8-mm eyepieces
  • Compatibility: All Vixen OTAs with 60-mm connection
  • Allows a mark I–III coma corrector to be connected to a R200SS Newton
  • Length: 13 mm or 34 mm
  • Weight: 66 g

PACKAGE CONTENTS
  • Vixen 60–50.8-mm adapter sleeve
Batteries required: No
Colour: black
Material: Aluminium
Net weight (without access.) (g): 66
Total length (mm): 13

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Produkt- und Sicherheitshinweise


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • General safety instructions DANGER Risk of suffocation! Improper use of this product can result in suffocation, especially for children. Therefore, carefully observe the following safety instructions. Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a risk of suffocation! Keep cords, ribbons, and similar materials away from children! They could accidentally strangle themselves and suffocate! NOTE Risk of material damage! Improper handling can damage the device and/or accessories. Therefore, only use the device according to the following safety instructions. Do not dismantle the device! In the case of a defect, contact your dealer. They will contact the service center and may send the device in for repair.
  • Never look at the sun through an eyepiece/telescope without a certified protection filter. A moon filter can never be used for solar observation. The moon filter is only suitable for moon observation. The solar filter must be mounted in front of the telescope opening, not at the eyepiece. Otherwise, the concentrated light beam through the optics will immediately destroy the filter foil, leading to severe eye damage, including permanent blindness.
  • Never leave the optics unattended. Children and inexperienced adults could point the telescope at the sun without proper precautions and lose their eyesight.
  • Do not expose the device to high temperatures.

Similar products

BRESSER Universal Smartphone Adapter Deluxe
Take pictures with your smartphone through the telescope or microskope? With the Smartphone camera adapter this is now child's play! Simply screw the adapter to the eyepiece and use your smartphone as a camera with a super-telephoto / super-macrophoto lens. It lets you take pictures of distant objects or very small objects as if you were very close.The Deluxe version offers an even more comfortable and secure attachment to the eyepiece. By a rotary movement of the clamping ring 3 clamping jaws are evenly applied to the eyepiece housing and the Smartphone adapter sits firmly and centrically on the eyepiece. The fine adjustment of the height of the smartphone support allows a quick and precise adjustment of the viewing height of the smartphone camera above the eyepiece lens. Good image results are thus guaranteed.  FEATURES Take photos through the telescope Smartphone camera with super telephoto lens Fine Height adjustment of phone support Wide adjustment range for eyepiece housing diameter Fits 31.7mm (1.25") eyepieces For eyepiece housing diameters from 22-38mm SCOPE OF DELIVERY Smartphone holder deluxeLocking ring for the smartphone

£14.90*
BRESSER Universal Smartphone Adapter
Take photos with your smartphone through your spotting scope, microscope or telescope. It’s a child's play with the BRESSER Universal Smartphone Adapter. Simply attach the adapter to the eyepiece holder of your optical device and then use all together as a telephoto lens for your smartphone camera. Now you can shoot distant objects as if they were up close or take photos through a microscope.FEATURESuniversal adapter to assemble the smartphone to a spotting scope or telescopefor eyepieces up to 68 mm diameterfor smartphones with a width of 50-88mmSCOPE OF DELIVERYSmartphone adapterManual

£39.00*
BRESSER Binocular Tripod Adapter Deluxe, sturdy metal version
Sturdy metal tripod adapter for binoculars up to 3kg net weight. High-quality connecting element between tripod head and binocular bridge with a very stiff design.FEATURESTripod adapter Deluxe made of metalSuitable for almost all binoculars up to 3kg weightConnection element between tripod head and binocular bridgeVery elegant and rigid designTripod connection thread standard 1/4 inch photo threadBinocular connection thread standard 1/4 inch photo threadRubber-coated tripod support for non-slip fitLarge rubber-coated fixing screw for binocular bridgeOverall length: 100mm, weight: 100g, colour: blackSCOPE OF DELIVERYTripod Adapter Deluxe (1pc)

£19.90*
BRESSER T2 ring for Sony - E-mount
Connect your BRESSER Microscope or Telescope with a Sony System camera and take images or videos* of your observed object!T-Mounts are the connecting piece between the T2 camera adapter and the system camera. Please read the instruction manual of your camera to find out which T-Mount you need, look into the instruction manual of your camera.The adapter will provide the necessary distance extension between the flange focal length of 18mm for E-Mount and 55mm for T2. The overall length is 37mm.For Sony NEX or ILCE cameras with E-Mount bajonet (e.g. Sony Alpha 6000, Sony A7S / A7R)SCOPE OF DELIVERYT2-Ring für Sony E-Mount camerasFor Sony NEX, ILCE Cameras (e.g. A7S, A7R)

£27.99*
BRESSER Adapter 2" on T2
Enables you to connect a camera to telescopes that accept 2" barrel eyepieces. You will need a T2-ring for your special camera type also. The very special feature of this adaptor is the very short mechanical design (2.0mm) which enables the camera use also on telescopes with a short focal range. This adapter is also prepared to use with 2" filters.   

£23.00*
%
BRESSER Smartphone Holder for Telescopes (1.25")
Take pictures with your smartphone through the telescope! With the Smartphone camera adapter this is now child's play! Simply screw the adapter to the eyepiece and use your smartphone as a camera with a super-telephoto lens. It lets you take pictures of distant objects as if you were very close. FEATURES Take photos through the telescope Smartphone camera with super telephoto lens Fits 31.7mm (1.25") eyepieces For eyepiece housing diameters from 32-34mm SCOPE OF DELIVERY Smartphone holder Locking ring for the smartphone

£8.00* £9.90* (19.19% saved)
BRESSER Telescope Camera Adapter (1.25")
The BRESSER Telescope Camera Adapter is the connecting piece between your 35 mm DSLR camera and the telescope. The connection to your camera can be achieved with the fitting T2-mount (T2-mount optional). For the focal fotography, you need to unscrew the bottom part of the adapter and attach the camera with the fitting T2-mount directly to the push-on contact. The eyepiece projection is possible when you put an eyepiece into the adapter and tighten the knurled screw. After that, you have to attach the T2-mount and the camera and you are ready to go.FEATURESEyepiece connection diameter: 31.7 mm (1.25")Eyepiece total diameter max. 35mm  SCOPE OF DELIVERYTelescope Camera Adapter 1.25"

£39.00*
BRESSER T2 Extension Tube Set
Set of 5 extension tubes with T2 thread on both sides for exact distances and secure hold of cameras for astrophotography. Also comes with SC to T2 thread adapter.In astrophotography, most cameras are connected to a telescope via a T2 thread (M42x0.75), the most popular international standard. However, in many cases, T2 and T2-ring adapters for connecting telescope focusers to a camera are not sufficient, as specific distances must also be observed. This is especially important when using correctors, reducers or flatteners. This extension tube set, which consists of 5 mm, 7.5 mm, 10 mm, 15 mm and 30 mm tubes, will allow you to obtain almost any distance using the corresponding combination. Each tube has a T2 interior thread on one side and a T2 exterior thread on the other side.Most telescopes either include a T2 thread adapter, or the eyepiece can be used with a simple T2 thread adapter with a 2” plug-in diameter (item no. 0510365).However, Maksutov-Cassegrain, Schmidt-Cassegrain, ACF or Ritchey–Chrétien telescopes may use a so-called SC thread. To allow you to use this extension tube set with these telescopes, the set also includes an SD to T2 thread adapter.FEATURES5 T2 tubes with lengths from 5 mm to 30 mmCombination of tubes allows you to obtain distances of 5 mm to 67.5 mmFor exact camera distances in astrophotographyDELIVERY CONTENT5x T2 extension tubes (5/7.5/10/15/30 mm)1x SC to T2 thread adapter

£29.00*
BRESSER Extension Tube 25 mm for 2.5" HEXAFOC
Are you having trouble focusing your eyepiece or camera? Then use this BRESSER 25 mm extension sleeve to increase the distance between the 2.5 inch HEXAFOC eyepiece extension and the eyepiece or camera. The extension sleeve has an M68x0.75 mm internal and external thread and can therefore be screwed directly onto the HEXAFOC draw tube.SPECIFICATIONSIncreases the distance to the eyepiece/camera Suitable for 2.5 inch HEXAFOC Optical length: 25 mm Internal and external thread: M68x0,75 mmInside black matt coated Material: aluminium, black anodized SCOPE OF DELIVERYExtension sleeve 25 mm (1 piece)

£17.00*
BRESSER Extension Tube 37,5 mm for 2.5" HEXAFOC
Are you having trouble focusing your eyepiece or camera? Then use this 37.5 mm extension sleeve to increase the distance between the 2.5 inch HEXAFOC eyepiece extension and the eyepiece or camera. The extension sleeve has an M68x0.75 mm internal and external thread and can therefore be screwed directly onto the HEXAFOC draw tube. SPECIFICATIONSIncreases the distance to the eyepiece/cameraSuitable for 2.5 inch HEXAFOCOptical length: 37,5 mmInternal and external thread: M68x0,75 mmInside black matt coatedMaterial: aluminium, black anodizedSCOPE OF DELIVERYExtension sleeve 37,5 mm (1 piece)

£19.90*
%
BRESSER Variable Adapter
The BRESSER camera adapter is the ideal connecting piece between your 35 mm SLR camera or DSLR and your telescope. The adapter is suitable for 1.25" eyepieces with a larger housing diameter of up to 55 mm. Please note, this adapter will be suitable for most Refractors and Cassegrain designs, but may not be suitable for use with all Newtonian designs of telescopes, due to the comparatively short travel of focus in some Newtonians. Please check with us if you'd like further advice regarding your particular telescope.FEATURESvariable camera adapterfor eyepiece projection and prime focusincludes a short prime focus adapter from 1.25" to T2 threadsuitable for 1.25" eyepieces up to 55mm housing diameter barrel diameter: 31.7mm (1.25")WHAT'S INCLUDEDvariable camera adapter

£55.00* £69.00* (20.29% saved)
BRESSER Camera-Adapter M35/T2 for MC/MCX100/127
Camera-Adapter M35/T2 for Bresser MC/MCX-100 and MC/MCX-127 Maksutov telescopes The BRESSER Camera-Adapter M35/T2 for MC/MCX100/127 is principally designed to connect a DSLR camera (with appropriate manufacturer-specific T2 T-ring, available separately) to the Bresser MC-100 and MC-127 Maksutov telescopes which have a built-in M35 connecting thread. You can also use wider-bodied astronomical cameras (non-c-mount), which have T2 threads built into their bodies, as standard with this camera adapter. This adapter can be separated into two different lengths of 30mm and 80mm (which both truncate in a T2/M42 thread). The use of these different lengths of extension tube allows the user to vary the projection of image on to a camera chip and get the best framing for the size of object being imaged. Please note: an extra camera specific T2-adapter ring (Canon, Nikon, Sony, etc.) is necessary to connect a DSLR.  Many of these are available from us and you are welcome to contact us for advice if unsure which of these to pick.WHAT'S INCLUDED Camera-Adapter with M35x1,0mm to M42x0.75mm (T2) thread

£46.00*

Customers also bought

Vixen SX 60 mm to 50.8 mm adapter sleeve
The Vixen SX 60 mm to 50.8 mm adapter sleeve can be screwed on to the thread of a 60-mm focuser for connectionto a 50.8-mm (2") sleeveFEATURES Adapts 60-mm focusers for 50.8-mm eyepieces or flip mirrors. Compatibility: All Vixen OTAs with 60-mm connection Length: 10 mmWeight: 65 gPACKAGE CONTENTS60 mm to 50.8 mm adapter sleeve

£31.00*

Customers also viewed

Vixen 60 mm extension tube
This extension tube extends back focus depth to an additional 66 mm, for Vixen 60mm diameter focusers. It is suitable for extending compatible focuser drawtubes for use visually without a Star Diagonal but most commonly extends focus travel for astrophotography in a prime focus position, or for straight-through use with Barlow lenses and other accessories. FEATURES Compatibility: all Vixen OTAs with 60mm diameter drawtubes Weight: 115g SCOPE OF DELIVERY Extension tube 60 mm

£31.00*
BRESSER NightExplorer 7x50 Astronomy-Binoculars
The BRESSER NightExplorer 7x50 astronomy binoculars are ideal for terrestrial observations in poor light conditions and discovering the night sky. They feature a 50-millimetre objective that lets in plenty of light. Thanks to the 7x magnification, objects that are 700 metres away appear to be just 100 metres in front of you. Compared with binoculars with a higher magnification, these binoculars allow you to see much more. At a distance of 1000 metres, the field of view is 126 metres wide. On clear nights, you can view large objects such as the Milky Way. During the day, you can explore fascinating landscapes until twilight. Coating In order to further increase the light transmission and counteract reflections, the premium BaK-4 optics (barium crown glass) have a full multi-layer coating. Focusing The 7x50 Porro binoculars also feature an individual eyepiece focus to ensure that you obtain a sharp image. This is set at a large depth of field. You only need to adjust the focus if the next object is far away from the previous one. To view objects in the immediate vicinity, you can adjust the close focus from 8 metres. Crystal-clear image, even when wearing glasses The binoculars are also suitable for people with visual impairments: the rubber eyecups can be folded over so that you can look through the eyepieces while wearing glasses and see the entire field of view. The dioptre adjustment of +/- 6 allows you to compensate for small differences in vision between each eye. Weatherproof and robust The Porro binoculars also produce an excellent image in poor weather conditions such as fog and rain. It features a waterproof design to ensure that no liquid gets inside the housing. The binoculars are also filled with nitrogen to prevent the lenses from fogging up. In addition, they have an ergonomic rubber armouring that provides a comfortable and secure grip and protects the sensitive optics against impacts/ Portable design The binoculars come with a lightweight aluminium tripod so that you can make observations from a fixed location. If you need to travel a little further, both the tripod and the binoculars can be transported in a practical backpack, which is also included with the set. Observe in poor light conditions and discover the night sky with the BRESSER NightExplorer 7x50 astronomy binoculars! FEATURES Powerful binoculars Suitable for use at twilight and for terrestrial observations Also suitable for observing large celestial objects such as open and globular clusters Magnification: 7x Lens diameter: 50 mm Optical design: Porro Full multi-layer coating BaK-4 glass material Eyepieces with rubber eyecups Individual eyepiece adjustment Large field of view: 126 m (at a distance of 1000 m) Close focus: from 8 m Dioptre adjustment: +/- 6 Tripod connection thread Includes Aluminium tripod Includes Backpack DELIVERY CONTENT Astronomy binoculars Tripod with quick release plate Backpack Instructions with warranty information

£315.00*