Skip to main content Skip to search Skip to main navigation

VIXEN 35655 Carry Bag for OTA & tripod

With BRESSER, you can enjoy a smooth introduction to the vast world of astronomy. Our detailed information ("Telescope Guide") provides valuable tips for beginners—but even experienced astronomers can use the information we provide (e.g., tables for the geographical latitude of all major world cities) as a reference.

Here is the table of contents of the comprehensive BRESSER Telescope Guide:

Sky Guides by Bresser

The Sky Guide provides comprehensive information on constellations, planetary positions, and astronomical events – perfect for planning your observations and delving deeper into astronomy.
Visit the guide directly here to make the most of your observations!

Product and safety instructions


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • General safety instructions DANGER Risk of suffocation! Improper use of this product can result in suffocation, especially for children. Therefore, carefully observe the following safety instructions. Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a risk of suffocation! Keep cords, ribbons, and similar materials away from children! They could accidentally strangle themselves and suffocate! NOTE Risk of material damage! Improper handling can damage the device and/or accessories. Therefore, only use the device according to the following safety instructions. Do not dismantle the device! In the case of a defect, contact your dealer. They will contact the service center and may send the device in for repair.
  • Never look at the sun through an eyepiece/telescope without a certified protection filter. A moon filter can never be used for solar observation. The moon filter is only suitable for moon observation. The solar filter must be mounted in front of the telescope opening, not at the eyepiece. Otherwise, the concentrated light beam through the optics will immediately destroy the filter foil, leading to severe eye damage, including permanent blindness.
  • Never leave the optics unattended. Children and inexperienced adults could point the telescope at the sun without proper precautions and lose their eyesight.
  • Do not expose the device to high temperatures.
Skip product gallery

Accessories

Vixen SD103SII Telescope OTA
The Vixen SD103SII Telescope OTA is a new 103 mm apochromatic refractor with high-performance Super-ED glass (= SD). The advantage of this SD refractor is its short length and low weight. The FPL53 glass reproduces an extremely clear and sharp image by an exceptionally high degree of elimination of residual chromatic aberrations. The SD glass is designed to bring all beams of violet, red, blue, yellow and green very precisely together on the same plane. The special lens material reduces chromatic aberration across all colours.The new Vixen SD103SII no longer uses spacer plates, which leads to a significantly better image quality, especially with bright stars. In photographic images, no spikes can be seen on the stars, which were otherwise produced by the spacer plates. In addition, you will be thrilled when you look at the moon or the brighter planets and observe the moon craters pin sharp as well as with extremely high contrast. Also look at the ring planet Saturn or the cloud bands on Jupiter. But of course, brighter deep sky objects such as the Orion Nebula or the Andromeda Galaxy can also be observed in impressive detail.In combination with the new optional SD Reducer HD Kit or SD Flattener HD, these refractors allow illumination with a 44 mm image circle for full format SLR cameras. The older ED81SII, ED103S, ED115S refractors were originally developed for visual observers and photographers using APS-C cameras. However, the new SD series is also optimised for use with full-frame cameras through the use of new inner baffle rings. The large 60 mm eyepiece extension also allows heavy cameras to be attached without tilting. Furthermore, the included folding mirror allows comfortable observation even in unfavourable observation situations and additionally offers a T2 thread for connecting a DSLR camera. This allows you to observe in straight line or at a 90° angle. The carrying handle attached to the tube clamps ensures a secure grip when transporting the telescope. FEATURESObjective lens: D=103 mm, multi-coated 2-lens SD apochromat without spacer plates No more spikes on the stars Focal length: 795 mm (f7.7) Resolution and limiting magnitude: 1.13 arcseconds; 11.8 Light gathering power: approx. 217x more than the human eye Dimensions and weight: 115 mm dia x 810 mm; 5.5 kg Viewfinder telescope: 7x50 illuminated Adapters and connections: 60 mm thread, 50.8 mm and 31.7 mm socket, thread for T-ring Connection: 50.8 mm and 31.7 mm socket with flip mirror / folding mirror Photography: primary focus and eyepiece projection SCOPE OF DELIVERY Refractor SD103SII Telescope (OTA) Tube clamp with dovetail Dew cap Flip mirror / folding mirror Carrying handle Dovetail rail 7x50 viewfinder

Available

£2,199.00*
Vixen SD115SII Telescope OTA
The Vixen SD115IIS is a new 115 mm apochromatic refractor with high-performance Super-ED glass (= SD). The advantage of this SD refractor is its short length and low weight. The FPL53 glass reproduces an extremely clear and sharp image by an exceptionally high degree of elimination of residual chromatic aberrations. The SD glass is designed to bring all beams of violet, red, blue, yellow and green very precisely together on the same plane. The special lens material, reduces chromatic aberration across all colours.The new Vixen SD115SII no longer uses spacer plates, which leads to a significantly better image quality, especially with bright stars. In photographic images, no spikes can be seen on the stars, which were otherwise produced by the spacer plates. In addition, you will be thrilled when you look at the moon or the brighter planets and observe the moon craters pin sharp as well as with extremely high contrast. Also look at the ring planet Saturn or the cloud bands on Jupiter. But of course, brighter deep sky objects such as the Orion Nebula or the Andromeda Galaxy can also be observed in impressive detail.In combination with the new optional SD Reducer HD Kit or SD Flattener HD, this refractor allows illumination with a 44 mm image circle for full format SLR cameras. The older ED81SII, ED103S, ED115S refractors were originally developed for visual observers and photographers using APS-C cameras. However, the new SD series is also optimised for use with full-frame cameras through the use of new inner baffle rings. The large 60 mm eyepiece extension also allows heavy cameras to be attached without tilting. Furthermore, the included folding mirror allows comfortable observation even in unfavourable observation situations and additionally offers a T2 thread for connecting a DSLR camera. This allows you to observe in straight line or at a 90° angle. The carrying handle attached to the tube clamps ensures a secure grip when transporting the telescope. FEATURESObjective lens: D=115 mm, multi-coated 2-lens SD apochromat without spacer plates No more spikes on the stars Focal length: 890 mm (f7.7) Resolution and limiting magnitude: 1.01 arcseconds; 12.5 Light gathering power: approx. 270x more than the human eye Dimensions and weight: 125 mm dia x 920 mm; 6.3 kg Viewfinder telescope: 7x50 illuminated Adapters and connections: 60 mm thread, 50.8 mm and 31.7 mm socket, thread for T-ring Connection: 50.8 mm and 31.7 mm socket with flip mirror / folding mirror Photography: primary focus and eyepiece projection SCOPE OF DELIVERY Refractor SD115SII Telescope (OTA) Tube clamp with dovetail Dew cap Flip-Mirror / folding mirror Carrying handle Dovetail rail 7x50 viewfinder

Available

£2,898.00*
Vixen A105MII achromatic refractor - optical tube assembly
This high-quality refractor features a 105 mm achromatic lens. It produces impressive images of the moon’s craters and Saturn’s ring system. The long F9.5 aperture ratio delivers an optimal contrast and ensures that colour deviations are kept to a minimum. The telescope is made in Japan using cutting-edge manufacturing processes. Highly recommended for beginners and advanced observers who value quality and excellent workmanship. FEATURES Lens: 105 mm achromatic Focal length: 1000 mm Aperture ratio F9.5 Resolution 1.1 Limiting magnitude: 11.9 Light-gathering power: 225× Photography: YesDimensions: 1010 mm x 115 mm Weight: 4.8 kg WHAT’S INCLUDED Tube clamps Carry handle Red dot finder Flip mirror

Available

£1,039.00*
Vixen A70Lf achromatic Refractor - optical Tube
The A70Lf refractor is an ideal entry-level model for beginner astronomers. Thanks to Vixen’s quality controls, the 70 mm lenses are produced to an b>outstanding quality standard. The refractor comes with two Plössl eyepieces (6.3 mm and 20 mm) and a 90° star diagonal. The A70lf is ideal for exploring the b>moon and the brighter planets. On moonless nights you can observe the Andromeda Galaxy or Orion’s Belt. The 6x24 viewfinder makes locating celestial objects very quick and easy. We recommend using this product with the MINI PORTA mount. The mount is lightweight and easy to use. FEATURES Perfect entry-level model for beginner astronomers The 70 mm lenses are produced to an outstanding quality standard 900 mm focal length T2 camera connector available WHAT’S INCLUDED Telescope 31.7 mm star diagonal PL20mm & PL6.3mm eyepieces 6x24 viewfinder

Available

£229.00*
Vixen A80Mf optical Tube
The A80Mf refractor is an ideal entry-level model for beginner astronomers who value high-quality optics. Thanks to Vixen’s quality controls, the 80 mm lenses are produced to an outstanding quality. The refractor comes with two Plössl eyepieces (6.3 mm and 20 mm) and a 90° star diagonal. The A80Mf is ideal for exploring the moon and the brighter planets. On moonless nights you can observe the Andromeda Galaxy or Orion’s Nebula. The 6x24 viewfinder makes locating celestial objects quick and easy. We recommend using this product with the optional Porta II mount. The mount is lightweight, stable and easy to use. FEATURESObjective lenses: 80 mm achromat, coatedFocal length: 910 mm (f11.4)Resolution and limiting magnitude: 1.45 arc seconds; 11.3Light-gathering power: 131xDimensions and weight: (OD) 90 mm x (L) 860 mm; 3.3kgDew shield diameter: 100 mmViewfinder telescope: 6x24 mmAdapter and connections: 42 mm for T-thread; 31.7 mm connectionIncluded accessories: 31.7 mm star diagonal, PL20mm & PL6.3mm eyepiecesPhotography: Primary focus and eyepiece projection WHAT’S INCLUDED 31.7 mm star diagonal PL20mm & PL6.3mm eyepieces Tube clamps Dovetail adapter 6x24 mm viewfinder telescope

Available

£309.00*
Vixen SXG-HAL130 Aluminum Tripod for GP, SX & AP Mounts
High-quality, stable aluminium tripod for a variety of mounts with 45 mm connections. The aluminium profile ensures firm positioning with a minimum amount of vibration. Suitable for GP2, GPD2, AP, SX, SXP, SXP2 and AXJ mounts or similar with 45 mm connections. FEATURES Robust aluminium tripod without mount Suitable for: GP-, SX- & AP mounts Height-adjustable: 81 - 130 cm Weight: 5.5 kg WHAT’S INCLUDED Aluminium tripod Adjustment pins for GP2, GPD2, AP and SX mounts

Available

£258.00*
Vixen ASG-CB90 Carbon Tripod
Despite being developed for heavy mounts, the Vixen ASG CB90 carbon tripod is one of the lightest tripods on the market. The ASG CB90 tripod was originally designed for the new AXJ mount. However, it is also ideally suited to the tried-and-tested SX, HF2, AP, GPD2 and GP2 mounts. The hand nuts can be loosened to extend the tripod by one section. The legs of the ASG CB90 tripod can be secured by a reliable screw cap and are equipped with a 2.5 cm interval scale marking. FEATURES 2-section carbon tripodLightweight and portable Stable design with minimal vibrationsDimensions: 545 mm to 900 mm length Connections: 45 mm pin hole Weight: 3.4 kg WHAT’S INCLUDED Carbon tripod

Available

£500.00*
Vixen APP-TL130 Tripod for AP, GPD & SX Mounts
The APP-TL130 tripod is a lightweight, portable tripod for all standard Vixen mounts with a 45 mm support. Compatible tripods include the Vixen HF2, SX, AP and AXJ mounts. The tripod is adjustable in 3 sections and can be retracted to a very small size. Weighing just 3 kg, it is ideal for astronomy trips. FEATURES Leg section: 3x extendable Maximum extended height: 1296 mm Minimum retracted height: 598.4 mm Material: Aluminium Weight: 3.0 kg Maximum height: 1159 mm (height above the ground) Minimum height: 526 mm (height above the ground) WHAT’S INCLUDED Aluminium tripod Adjustment pins for GP2, GPD2, AP and SX mounts

Available

£195.00*
Skip product gallery

Customers also bought

Vixen Dual-Speed-Focuser
​The 1: 7 reduction enables very fine focusing of targets.An indispensable accessory, especially in astrophotography.The reduction can be retrofitted on the following telescopes:A80M, A105M, NA140SSf, ED81S, ED103S, ED115S, AX103S, VC200L, VMC200L and R200SSCannot be used on old devices from the 90s with plastic focusing knobs - in these cases, it is also necessary to swap the focus spindle (please contact us for details).PROPERTIESAllows very fine focusingIndispensable in astrophotographyCan be retrofitted to many Vixen telescopesReduced to 7:1Weight: 170 gWHAT'S INCLUDEDDual Speed KnobAssembly tool

Available

£192.00*
Vixen AX103S apochromatic Refractor - optical Tube
The AX103S is a top-of-the-range ED apochromat in the refractor series. It features a triplet ED object lens and a rear-mounted field-flattener lens. The f8.0 refractor contains a central ED lens in the objective and reduces chromatic aberration to an absolute minimum. An optional focal reducer can reduce the aperture ratio to 1:5.6 in order to provide quicker results for astrophotographers. The built-in field flattener lens provides a sharp image across the entire field of view – an essential requirement in astrophotography. The 60 mm ring on the focuser allows you to attach a 2’’ eyepiece or accessories and a camera adapter. The AX103S is specially designed for photography, but also offers stunning visual performance, especially for observing the moon and the planets. The AX 103S is corrected for full frame photography and provides razor-sharp pictures right into the corners of the image field. This telescope is guaranteed to provide a lifetime of outstanding performance! FEATURES Optimized for full frame photography Fully coated triplet ED objective with flattener Very high sharpness and contrast Optional reducer availableBackfocus without Reducer: 150.0 mmBackfocus with Reducer: 63,5 mm103 mm aperture and 825 mm focal length WHAT’S INCLUDED Telescope Tube clamps and carry handle Illuminated 7x50 viewfinder telescope Vixen's very useful Flip mirror diagonal system for finding and framing targets

Available

£2,999.00*
Vixen AP Clamp Lever
AP clamping lever for the AP mount axesThe friction control mechanism (slip clutch) can be secured in place with the AP clamping lever. FEATURES Clamping lever for use in combination with Vixen AP modules Dimensions: 23 mm x 33 mm x 31 mm Weight: 10 g DELIVERY CONTENT 1x clamping lever

Available

£12.00*
Vixen NPL 50° Eyepiece 30mm (1.25'')
The 2-group 4-element Plossl optical design of the NPL series eyepieces delivers flat and clear images with good color correction. The NPL20, NPL25, NPL30 and NPL40 eyepieces employ twist-up eye-guards for viewing comfort. The lenses are fully multi-coated for high light transmission. FEATURES Push-fit Size: 31.7 mm Apparent field of view: 50° Eye relief: 24 mm Weight: 120 g WHAT'S INCLUDED 1x Eyepiece 30 mm (1.25'')

Available

£58.00*
Vixen AP-Z azimuthal Mount with Slip Clutch
Simple force of friction keeps the telescope in place. Easily direct the telescope to your desired celestial object without loosening a screw. The friction automatically holds the telescope in position. The AP mount provides a secure, stable support for your telescope. Thanks to the slip clutch mechanism, the mount can be quickly adjusted to the target object. There is a wide range of optional accessories. FEATURES Azimuthal telescope mount with manual fine adjustment Easy to use and quick to install Designed for telescopes up to 8 kg WHAT'S INCLUDED Mount Wheel for fine adjustment

Available

£679.00*
BRESSER Binocular Tripod Adapter Deluxe, sturdy metal version
Sturdy metal tripod adapter for binoculars up to 3kg net weight. High-quality connecting element between tripod head and binocular bridge with a very stiff design.FEATURESTripod adapter Deluxe made of metalSuitable for almost all binoculars up to 3kg weightConnection element between tripod head and binocular bridgeVery elegant and rigid designTripod connection thread standard 1/4 inch photo threadBinocular connection thread standard 1/4 inch photo threadRubber-coated tripod support for non-slip fitLarge rubber-coated fixing screw for binocular bridgeOverall length: 100mm, weight: 100g, colour: blackSCOPE OF DELIVERYTripod Adapter Deluxe (1pc)

Available

£19.90*
Skip product gallery

Customers also viewed

EXPLORE SCIENTIFIC Telescope Case ED-APO & AR 127s/152s
Your telescope is much more than an observation aid. It is your personal pathway to the stars, and protecting it while it is in storage or transit should be a priority. Designed specifically for the ED127, ED127CF, AR127s and AR152s, this soft-sided carrying case offers that ideal combination of protection and portability. Inside, the light gray colored nylon features multiple adjustable velcro compartments designed to carefully cradle and easily organize your scope, eyepieces and accessories. The padded polyester outer shell has reinforced back and sides, a shoulder strap with Explore Scientific embroidered logo pad and hand straps for grab-and-go convenience. The case's interior measurements are 110 x 29 x 20 cm. Weight is 1,8 kg.FEATURESSoft-sided carrying caseProtection and organization of your scope and accessoriesIdeal combination of protection and portabilityMultiple adjustable velcro compartmentsShoulder strap with Explore Scientific embroidered logo padNo shifting between compartmentsReinforced back and sidesKeeps the contents safe Interior measurements are 110 x 29 x 20 cm, Weight is 1,8 kgExterior measurements are 115 x 34 x 24 cm SCOPE OF DELIVERYaccessory soft case with protective dividers

Available

£149.00*
Vixen SXG-HAL130 Aluminum Tripod for GP, SX & AP Mounts
High-quality, stable aluminium tripod for a variety of mounts with 45 mm connections. The aluminium profile ensures firm positioning with a minimum amount of vibration. Suitable for GP2, GPD2, AP, SX, SXP, SXP2 and AXJ mounts or similar with 45 mm connections. FEATURES Robust aluminium tripod without mount Suitable for: GP-, SX- & AP mounts Height-adjustable: 81 - 130 cm Weight: 5.5 kg WHAT’S INCLUDED Aluminium tripod Adjustment pins for GP2, GPD2, AP and SX mounts

Available

£258.00*
Vixen Porta II azimuthal mount
The Vixen Porta II is a high-quality azimuthal mount from the award-winning manufacturer Vixen. Featuring an intuitive, versatile and reliable design, the Porta II was specially developed to enable quick and precise telescopic observations along the vertical and horizontal axes without the need for a complex setup. It comes with fine adjustment wheels for fine tuning the position of the telescope to track astronomical objects. It also has a highly portable design thanks to the detachable mount head, which can be quickly detached from the tripod via an M10 screw. In addition, the dovetail mounting system (Vixen standard) ensures maximum compatibility with a wide range of telescopes. The Vixen Porta II mount in detail Easy to use The Porta II does not require a clamp, as it sports a slip clutch that allows you to adjust the mount to your desired object. It also holds its position automatically, making it very easy to use. Highly portable design The mount is easy to transport thanks to the Porta II mount head, which can be detached by removing a single screw. Easy to operateThe Porta II adjustment system allows you to track objects and make fine adjustments using the supplied shafts, which can be repositioned as necessary for optimal viewing comfort.Practical accessory storage The accessory holder features slots for your eyepieces. It can also be used to store smaller photography accessories. The holder is easy to mount via a centrally positioned screw. Built-in tool The mount comes with a tool for adjusting the friction of the slip clutch. The tool is located underneath the rubber cover for easy access. FEATURES 360° fine adjustment with worm gears2x sprockets with 120 teeth eachNo axle clamp requiredSlip clutch friction systemDovetail system (compatible with the GP and Sphinx mount) Adjusts by up to 45° Mounts tubes with an aperture of up to 155 mmPACKAGE CONTENTSVixen Porta II mountAluminium tripod2 fine adjustment wheelsMounting toolStorage shelf for accessories

Available

£306.00*