SKYLUX Refractor Telescope 70/700mm with Smartphone Holder and Solar Filter

Set off in search of your own fascinating discoveries at the night sky. This starter set comes with everything you need for your first astronomical observations: reflector telescope with 130 mm aperture and 650 mm focal length, equatorial mount, tripod and comprehensive astronomical accessories. The system is very easy to use and extremely versatile. It is suitable for observing the Moon, the Sun and the planets as well as star clusters and gas nebulae. Ideal for your easy start in sky observation! Astro all-rounder for beginners - the telescope The astronomical telescope is a classic reflector telescope, a so-called Newtonian reflector. One characteristic of this particular type: They are designed to look in at the front and from the side instead of the rear. Thus, the observation position always remains comfortable, even when the tube is pointed vertically into the sky. Once familiar with it, the telescope is also very easy to use. These reflector telescopes also have one important advantage regarding their optics: they are free of chromatic aberrations and thus offer good imaging properties. With its 130 mm aperture, this entry-level telescope already collects a lot of light from celestial objects. In addition, 130 mm aperture and 650 mm focal length result in a short focal ratio (ratio of aperture to focal length) of 1 to 5 (F/5). This allows you to marvel at a bright image through this fast telescope. It also allows for high magnifications, making the beginner's telescope a flexible all-rounder for sky observing. Enjoy the full range of astronomical highlights: At low to medium magnification, take in open and globular clusters such as M13 in the constellation Hercules. Or you can admire gas nebulae such as the famous Orion Nebula M42. At high magnifications, on the other hand, observing the planets or details on the Moon becomes an absolute pleasure. The 130 mm aperture offers a resolution which allows you to admire your favourite celestial objects in sharp images at magnifications of up to about 260x. Technically, even more is possible - theoretically up to 487.5x with the included accessories. However, the image sharpness can then slowly decrease with increasing magnification. Nevertheless, how much you can really magnify, depends not only on your telescope. The air turbulence in the atmosphere (seeing conditions) is also always an important factor in your astronomical observations. Please note that reflecting telescopes of the "Newton" type always produce images both laterally reversed and upside down. This does not matter for astronomical observations, which is why these telescopes are very well suited for these purposes. For nature and landscape observations during the day, however, this characteristic is disruptive. Therefore, we recommend the BRESSER refracting telescopes for this application. User-friendly and stable - mount and tripod Have you found the perfect place for your observations? Then just attach the telescope to the equatorial mount and the height-adjustable aluminium tripod. The advantage of this type of mount: unlike azimuthal models, the movement of the celestial bodies has to be counterbalanced on just one axis. For this purpose, one axis is aligned parallel to the Earth's axis by pointing it approximately at the polar star. Adjustment and tracking of the telescope is particularly precise and comfortable via the two flexible shafts with fine adjustment. And your accessories stay always within reach on the storage plate attached to the tripod.Keep track of things automatically: For this telescope’s equatorial EQ-3 mount, the tracking motor with item number 4951400 is available as an optional accessory. This eliminates the need to manually track a celestial object set in the telescope. When this motor is installed at the mount, it automatically tracks the celestial object, keeping it in the field of view of the eyepiece. This makes observing the night sky even more comfortable! Complete astronomy starter package - the accessories Unpack and get started straight away - the beginner's telescope comes with lots of accessories. The LED viewfinder enables you to navigate the night sky with ease. This direction finder is installed on the telescope and projects a red dot onto a small ground-glass screen. When you look through it, the red dot appears to be floating at the exact location in the sky to which the telescope is pointed. Thus, the LED viewfinder allows you to easily find celestial objects and accurately align the telescope. Different perspectives of the night sky: With the two eyepieces included, you are able to view astronomical objects at different magnifications. With the standard 31.7 mm (1.25 inch) diameter sockets, they are simply inserted into the telescope's focuser. Do you want an even more detailed image? Then the 3x barlow lens can triple the magnification. However, during the day taking a look at the sky is also worthwhile: with the solar filter you can safely observe sunspots and granulation on our very own star. CAUTION: Never point the telescope at the Sun without the solar filter! Whether Sun, Moon, planets or deep sky objects - with the smartphone adapter you can capture your most fascinating moments on intriguing snapshots. Simply slip it over the eyepiece and take your first steps in astrophotography! FEATURES Reflector telescope with 130 mm aperture and 650 mm focal length Reflector type Newton Well suited for observing Sun, Moon and planets as well as star clusters and gas nebulae Height-adjustable tripod with equatorial EQ3 mount Precise adjustment through flexible shafts with fine adjustment in both axes Easy to use, very good for beginners Focal ratio F/5, thus well suited for many celestial objects 31.7 mm (1.25 inch) focuser Two eyepieces and one barlow lens with 31.7 mm (1.25 inch) sockets for different magnifications Safe solar observation with the included solar filter First steps in astrophotography with smartphone camera adapter SCOPE OF DELIVERY Telescope Aluminium tripod Equatorial EQ3 mount Eyepieces: 4 mm and 20 mm (1.25-inch socket) Barlow lens 3x (1.25-inch socket) LED illuminated dot viewfinder Solar filter Smartphone camera adapter Accessory tray Astronomy software download Instruction manual

BRESSER Barlow Lens 3x 1.25”Category: Spare Part for Carbon Look Telescope SeriesDescription: The BRESSER Barlow Lens with 3x magnification and a barrel diameter of 1.25 inches (31.7mm) enables triple magnification for more detail. Suitable as an accessory and spare part for the BRESSER Carbon Look Telescope series.

Tripod head with fine adjustment for fast and precise pole height adjustment of the BRESSER StarTracker Astrophoto Mount PM-100 art. no. 4964120. The BRESSER Micro Motion Head MH-100 allows a very precise adjustment by using large dimensioned knurled screws. In order to keep the adjustment distances by using the knurled screws as small as possible, the mounting plate has a quick-release clamping device with toothing in order to be able to select a rough presetting of the pole height (latitude at the location). The Micro Motion Head MH-100 can be mounted on any photo tripod with 1/4 inch photo thread closure. The BRESSER StarTracker astrophoto mount can then be mounted on the MH-100 tripod head without the use of tools using a 1/4" photo thread screw. The complete  motion head is made of black anodized aluminum and guarantees highest stability by the use of solid material. The knurled screws with fine pitch thread are even made of stainless steel and guarantee a long durability and corrosion resistance. Ideal for optimizing tracking accuracy in astrophotography. IMPORTANT NOTE: Can also be used as a stable adjustment element of a telescopic sight in astrophotography. Parallel alignment of the main telescope and the guide telescope is thus also possible quickly and precisely. Base plate connection: 3 x 1/4 inch photo thread with 35.0 mm hole spacing. Mounting plate connection: 2 x M8x1.25 thread with 35.0mm hole spacing. FEATURES Compact micro motion head with fine adjustment Functions as a so-called polar-wedge For precise adjustment of polar alignment (EQ mode)Mounting plate with quick-release clamping device and toothingCan be used with any photo tripod and 1/4inch thread adapterMade of black anodised aluminium and stainless steel Quick and easy to use deviceSuitable for BRESSER StarTracker Astrophoto Mount PM-100 Suitable for BRESSER tripod TP-100 DX  Also ideal as an adjustment element of an auto-guiding scopeFor parallel alignment of main telescope and guiding telescope Base plate connection: 3 x 1/4 inch photo thread; hole spacing 35.0mm Connection mounting plate: 2 x M8x1.25mm thread; drilling distance 35,0mm SCOPE OF DELIVERY Micro Motion Head MH-100 Instruction manual

BRESSER Star Diagonal 90 Degrees 1.25”Category: Spare Part for Carbon Look Telescope SeriesDescription: The BRESSER Star Diagonal with a 90-degree angle and a barrel diameter of 1.25 inches (31.7mm) provides comfortable and upright observations, especially at the zenith. Suitable ONLY for refractors (lens telescopes) and ideal as a spare part for the BRESSER Carbon Look Telescope series.Note: NOT suitable for reflectors (Newtonian telescopes, reflecting telescopes)!