Skip to main content Skip to search Skip to main navigation
Please note that our minimum order value is £50

Real Madrid Projection Home Weather Station

Help & Service for your product

Here you will find quick help, answers to frequently asked questions, and direct access to support.

Service Portal

Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.

Service Portal

Sensor Form

In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.

Sensor Form

Ratgeber & Tipps

FAQ - Frequently Asked Questions

The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
  1. Remove all batteries from the base station and the outdoor sensor.
  2. Wait at least 3–10 minutes.
  3. Insert the batteries into the base station.
  4. Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.

Tips:
  • If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
  • Do not place the base station near other electronic devices (this may interfere with reception).
  • If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
  • Briefly press the reset button on the back with a pen
  • If necessary, place the station closer to a window, as reception inside buildings may be limited

Product and safety instructions


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • WARNUNG!- Verschlucken Sie die Batterie nicht, Verätzungsgefahr.- Dieses Produkt enthält eine Knopfzelle/Knopfbatterie. Wenn die Knopfzelle verschluckt wird, kann sie in nur 2 Stunden schwere innere Verätzungen verursachen und zum Tod führen.- Wenn sich das Batteriefach nicht sicher schließen lässt, verwenden Sie das Produkt nicht mehr und halten Sie es von Kindern fern.
  • Wenn Sie glauben, dass Batterien verschluckt worden sein könnten oder sich in irgendeinem Körperteil befinden, suchen Sie sofort einen Arzt auf. Bei der Entsorgung dieses Produkts ist darauf zu achten, dass es ggf. getrennt gesammelt werden muss
  • Der AC/DC-Adapter wird als Trennvorrichtung verwendet.- Der Wechselstrom-/Gleichstromadapter des Geräts darf nicht verdeckt werden ODER muss bei bestimmungsgemäßem Gebrauch leicht zugänglich sein.- Um die Stromzufuhr vollständig zu unterbrechen, muss der AC/DC-Adapter des Geräts vom Netz getrennt werden
  • VORSICHT - Es besteht Explosionsgefahr, wenn der Austausch der Batterie nicht richtig erfolgt. Ersetzen Sie sie nur durch denselben oder einen gleichwertigen Typ.
  • Das Ersetzen einer Batterie durch einen falschen Typ kann zu einer Explosion oder zum Austritt von brennbarer Flüssigkeit oder Gas führen.- Batterie nicht ins Feuer oder in einen heißen Ofen werfen oder mechanisch zerkleinern oder zerschneiden. Dies kann zu einer Explosion führen
  • Der Verbleib einer Batterie in einer Umgebung mit extrem hohen Temperaturen kann zu einer Explosion oder zum Auslaufen von entflammbaren Flüssigkeiten oder Gasen führen.- Eine Batterie, die einem extrem niedrigen Luftdruck ausgesetzt ist, kann explodieren oder es kann zum Austritt brennbarer Flüssigkeiten oder Gasen führen.
Skip product gallery

Compatible Sensors

%
BRESSER Thermo-Hygro Sensor 433 MHz
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.148951499314998150041513115243152981540515406154071540815409154181544415479154961565216206162077000012CM30007000012GYE00070000137000020CM30007000020GYE0007000020QT50007000023700002770000297000030700006070042007004200GYE0007004200HZI0007004200MGU0007004200QT50007004210700433070043407004350700436070043707004380700650070065107006511700720170073507007402700740370074047007511700752070076107007620907060090707009070710960410196042009604210700001200000070000200000007004200000000 Living room, bedroom and children's room, kitchen and of course the bathroom - all benefit from a regular room climate check to ensure optimal comfort. So, enhance your weather station with this BRESSER Thermo-Hygro Sensor, allowing you to monitor conditions at an additional location. The sensor sends data over a significant distance of up to 80 meters, instantly displaying it on your base station's screen. Wondering if it's really that warm? The sensor includes an LCD display for immediate, on-site verification of current readings. This feature also enables this temperature and humidity meter to function as a standalone thermo-hygrometer. FEATURES Measures temperature and humidity Easy-to-read LCD display Functions as an independent solution, or as a replacement or supplementary sensor for select BRESSER weather stations Maximum range of up to 80 meters IP Protection Class: IP44Frequency: 433 MHz Dimensions: 71 x 65 x 23 mm / weight: 44 g Powered by 2x 1.5V AAA batteries (not included) SCOPE OF DELIVERY Thermo-Hygro Sensor Instruction manual

Available

£17.02* £23.99* (29.05% saved)
Skip product gallery

Customers also bought

BRESSER 100° WiFi Wildlife Observation Camera 4-24 MP 20m
Whether for fascinating wildlife photography or to protect your property, the BRESSER 100° WiFi Wildlife Camera keeps a close eye on your home, the forest, garden, etc., even when you’re not there. The impressive 100° motion sensor with 20 m range and the invisible infrared LED illumination guarantee that you’ll capture every movement, whether day or night. With a shutter release time of under 0.5 seconds, the wildlife camera captures detailed photographs with a resolution of up to 24 MP (interpolated). In addition, with the multi-shot function, you can take between 1 and 9 photographs in one go. Prefer moving images of elusive forest animals? Then watch all goings-on in full HD video with sound recording at up to 3 minutes’ length. Everything in view – with the modern WiFi wildlife camera including app In addition to its impressive performance, the wildlife camera also impresses with its user-friendliness. Configuring the device is as easy as 1, 2, 3, either via the integrated 2.4” TFT display or the WiFi function and the BRESSER EagleEye Trail Camera app. Found the ideal spot for your observations? Then grab the mounting material for easy installation. For nature lovers, it’s then just a matter of waiting to take fascinating photographs and videos of active wildlife, in colour in daylight and in black and white in darkness. When you’re ready, you can access and download the recordings from your camera using the app on your mobile device. As an alternative, you can also transfer the data to your computer directly from the SD card (not included) or via a USB cable.  Always ready for fascinating shots – benefit from automatically triggered photographs and full HD videos with sound with the BRESSER 100° WiFi wildlife camera. FEATURES Wildlife camera with 100° motion detection up to 20 m Photographs: 4 MP (sensor); 8 MP, 16 MP and 24 MP (interpolated) With multi-shot function: Set 1 - 9 photos 1080 full HD videos with sound recording (30 fps) Video length: 10 sec. to 3 min. Invisible 850 nm infrared light for night-time images Colour images during the day, monochrome images at night Trigger release speed:<0.5 seconds Data transfer to mobile devices via WiFi and app Straightforward setup via WiFi and app or on the 2.4” TFT screen Memory: SD card up to 256 GB (not included) Low power consumption for long battery life (up to 6 months in standby mode) Waterproof: IP54 Range of Wi-Fi: up to 15 m Battery-powered: 8x batteries type LR6 AA (not included) SCOPE OF DELIVERY Wildlife camera Mount Mounting strap USB cable Instruction manual

Available

£69.00*
%
BRESSER Researcher LCD Microscope
A digital microscope easily brings the microcosmos up on the screen. For a long time, these instruments were common only in the beginner's range. Now, the successful and proven Researcher series makes the step into the digital microscopy world and offers new options for microscopy in schools, for hobby or work. The optics and mechanics is the same as already well estabished in the Researcher Bino and Researcher Trino microscopes. Incuding 4 DIN objectives, Abbe condenser, coaxial fine focus and crosstable, the Researcher LCD is suitable for use in the microscopy hobby as well as in teaching or other work related applications. The highest magnification when using the 60x objective (compares to 600x on non digital microscopes) is high enough to view small microorganisms as microalgae, flagellates and bacteria. Other magnifications (20x, 100x oil) can be added later. The Researcher LCD is also compatible with our plan-achromatic objectives designed for 160mm optical tube length.The integrated, modern Sony camerasensor IMX206 with 16MP gives a brilliant image with good contrast on the monitor. The user can change settings and capture images and video conveniently with the touch screen. Images with 16MP and Full HD video can be stored directly on SD card (SD card not supplied). The microscope also has a HDMI connection, so the image is easily shown on a big monitor, TV, beamer or smartboard. The results can be shared with a bigger audience in lectures or teaching. FEATURESDigital microscope with integrated 7'' touchscreen 4 achromatic DIN objectives (RMS thread connection), parfocal length 45mm Objective magnifications of 4x, 10x, 40x, 60x (40x and 60x with specimen protection) Abbe condenser with iris diaphragm, fully adjustable and height adjustable High-contrast screen with natural colours, 1024x600px resolution Integrated Sony IMX206 camera sensor with 16MP HDMI port for connection to an external monitor SD card slot (supports up to 32GB, not included) USB port (for data transfer to SD card) SCOPE OF DELIVERYResearcher LCD Digital Microscope Set of 5 prepared slides and 5 blank slides Power adapter (EU) 5V 2A HDMI cable USB cable for transferring stored data to a PC Dust cover

Available

£472.05* £472.99* (0.2% saved)
BRESSER Arcturus 60/700 AZ - Refractor Telescope with Hard-top Case
Open the case and you're ready to go: The BRESSER Arcturus 60/700 AZ lens telescope shows you the fascinating world of star clusters and planets. This complete set contains everything you need for your first steps into sky observation: an astronomical lens telescope with 60 mm aperture and 700 mm focal length, an azimuthal mount, a tripod and lots of accessories. The system is very easy to handle and therefore ideal for introducing children to astronomy as a hobby. And since there are so many beautiful things to discover on Earth as well, the telescope is suitable for observing nature and landscapes. Simply an astro-classic – the telescope With this classic lens telescope – a so-called Fraunhofer achromatic refractor – even beginners and children can easily gain new insights into the night sky. Thanks to the modern, precisely coated optics, the starter telescope offers good imaging properties. A sharp image with good contrast – this is ensured by the large focal ratio of about 1 to 11.7 (F/11.7), which results from the ratio of the 60 mm aperture to the 700 mm focal length. Perfect for exploring our Moon, the planets, but also open star clusters and globular clusters. And what about the magnification? The 60 mm aperture provides a resolving power that easily allows magnifications up to about 120x with really sharp images. Technically, even more is possible with this beginner’s telescope – up to 175x with the included accessories. However, as the magnification increases, the image can become more and more blurred. How much magnification is actually possible depends not only on the telescope, but also on the air turbulence in the atmosphere (seeing conditions). The foundation for moving impressions – mount and tripod For your nighttime observations, attach your telescope to the height-adjustable aluminium tripod with azimuthal mount. Thanks to its extremely easy operation, you can enjoy effortless astronomical explorations with this azimuthal mount. Just like with a normal photo tripod, you simply turn the starter telescope by hand up and down, to the left and right. To ensure that your eyepieces, compass, star map etc. are always within reach, simply place your accessories on the practical storage plate located between the tripod legs. Everything for a good start in astronomy – the accessories In the sturdy hard-top case, in which you can store the beginner's telescope perfectly and take it safely with you on your travels, you will also find lots of accessories. The 5x24 finder is a small miniature telescope that you simply mount parallel to the actual telescope. With its weak 5x magnification and integrated crosshair, it helps you keep track of the starry sky. So it allows you to easily find celestial objects and precisely align the telescope – before you then enjoy the view with the higher magnification. And how high the magnification is depends on which of the three included eyepieces (4 mm; 12.5 mm; 20 mm) you are currently using. To change the magnification, simply insert another one into the telescope's focuser. If at some point you want to change your field of view with additional eyepieces: no problem! The 1.25 inch (31.7 mm) socket diameter complies with an international and cross-manufacturer standard, so you can combine a wide range of optional eyepieces with your telescope. For a comfortable view at any time, you will also find a 90-degree diagonal mirror in the scope of delivery. Otherwise, you would have to lie down under the starter telescope in order to achieve good observation results when the optics are pointed upwards into the sky. Instead, you simply look in comfortably from the side. In addition to the night sky, the Earth also offers many captivating sights. That's why the 1.5x erecting lens turns the image the right side around, so that you can devote your entry-level telescope to observing nature and landscapes during day. However, because orientation in the night sky is not as easy as on our daytime planet, a compass and star map are included in the set. This way you always know where to look and what you will see there. Enjoy a quick start to the exciting hobby of astronomy with the BRESSER Arcturus 60/700 AZ lens telescope including all accessories. FEATURES Beginner’s telescope for astronomy 60 mm aperture and 700 mm focal length Achromatic refractor type Fraunhofer Ideal for observing Moon, planets and star clusters Height-adjustable tripod with azimuthal mount Easy to use, therefore suitable for children Focal ratio F=11.7, thus sharp image and high contrast Three eyepieces with 31.7 mm (1.25 inch) sockets for different magnifications With hard-top case for storage and transport SCOPE OF DELIVERY Starter lens Telescope Aluminium tripod Azimuthal mount Eyepieces: 4 mm, 12.5 mm, 20 mm (1.25 inch sockets) Star diagonal mirror Erecting lens 1.5x Finder telescope: 5x24 Accessory tray Hard-top case Compass Star map Instruction manual

Available

£106.00*
Skip product gallery

Customers also viewed

BRESSER Professional Tuya Smart Weather Station with 7-in-1 Sensor
In your smart home, the BRESSER Professional Smart Tuya Weather Station with 7-in-1 Sensor integrates smoothly with your existing Tuya Smart Home system. Once connected, it can automatically trigger compatible devices (not included) based on your customised settings. Plus, you’ll stay updated with the comprehensive 6-day weather forecast, precise data from the outdoor sensor, and the air quality monitor. Smart home integration with Tuya for personalised automation Imagine your home adjusting itself for comfort: if the living room temperature drops below your set comfort level, the heating will turn on automatically. Fully integrable with your Tuya Smart Home app, the weather station follows the rules you set, with Tuya-compatible devices (not included) responding to the specified climate conditions according to your preferences. Accurate data with solar and thermo-hygro sensors Precise readings right outside your door: The 7-in-1 solar-powered outdoor sensor reliably measures outdoor temperature, humidity, wind speed, direction, rainfall, UV level, and light intensity. A large solar panel provides eco-friendly power, while a backup battery ensures continuous operation when sunlight is low. The base station’s built-in thermo-hygro sensor also gives you full control over your indoor climate—ideal for comfort indoors as well. Breathe easy with air quality monitoring This smart weather station keeps you informed on air quality. The display shows internet-based air quality index data along with pollutant levels like PM2.5 and CO2. A high-value alert notifies you directly if any limits are exceeded. Plus, the weather station can be expanded with optional sensors to monitor air quality locally—perfect for ensuring clean indoor air. Prepare your home for any weather—with the BRESSER Professional Smart Tuya Weather Station with 7-in-1 Sensor! FEATURES BASE STATION Smart WiFi weather station controllable via the Tuya Smart Life app Can trigger other Tuya smart devices Measures indoor temperature and humidity Current weather and 6-day forecast with high/low temperatures Displays precise readings from the 7-in-1 solar outdoor sensor (outdoor temperature and humidity, wind speed/direction, rainfall, UV level, light intensity) Shows internet-based air pressure and air quality data (air quality index (AQI), PM2.5, PM10, NO2, SO2, O3, CO) High-value alert for air pollutant levels Max./min. value memory Automatic display of time and date*** Integrated alarm clock with frost warning Displays moon phase, sunrise/sunset Expandable with optional sensors for display on the screen and in the Tuya app: Up to 3x thermo-hygro, soil, and/or pool sensors (not included) 1x PM2.5/10 sensor (not included) 1x CO2 sensor (not included) 1x HCHO and VOC sensor (not included) Power supply: plug (included), CR2032 backup battery (not included) ***PLEASE NOTE: This device receives the DCF time signal (Central European Time). However, you can easily adjust the time display to different time zones using the manual time setting.FEATURES 7-IN-1 OUTDOOR SENSOR Measures temperature, humidity, wind speed, wind direction, rainfall, UV level, light intensity Powered by a large, movable solar panel If sunlight is insufficient, operates on 3x AA batteries (not included) Range: up to 150 m Dimensions: 390 x 174 x 465 mm SCOPE OF DELIVERY Base station incl. plug 7-in-1 wireless sensor User manual

Available

£209.00*
BRESSER Additional / Replacement Base Station for the WSX3001 Professional Wi-Fi Weather Station
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.7002541700322070032307003240700350070035107003700700380070039009080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000 Would you like to view your weather data in an additional room? Are you looking for a gift to enable your neighbours to monitor your local weather? Or maybe the base station from your BRESSER Professional Wi-Fi Weather Station didn’t survive your recent move or your child’s latest tantrum? Whether you’re looking for an extension or a replacement, this base station will allow you to access all of your measurements on the large 20 cm screen. In addition to displaying the data from your 7-in-1 sensor (not included), it can also show the readings from up to 7 compatible additional sensors (not included). Share your weather data worldwide The base station can also be connected to online platforms such as Wundergound or Weathercloud so that you can share and access your weather data online. And with the German-language portal AWEKAS, you can integrate your measurements into your smart home system (configuration instructions: https://www.awekas.at/for2/index.php?thread/17080-software-api-stations-api-beschreibung-beta/). Additional base station – monitor the indoor climate in another room If your existing base station is in the living room, you can place a second base station in the kitchen or your child’s bedroom to view your local weather data in an additional room. The base station features a built-in thermo-hygro sensor, which measures the ambient temperature and humidity and displays a smiley symbol to indicate the quality of the indoor climate. You can then take effective measures to prevent the risk of mould or dry air. The additional base station is also ideal as a bedside clock. It features a built-in backlight that can be dimmed or switched off completely to ensure you get a good night’s sleep. And so that you wake up on time, it also has a practical alarm with a snooze function, as well as a frost warning function that triggers that alarm 30 minutes earlier when the outdoor temperature drops below -3°C – plenty of time to ensure that you get to work or school safely. Access all the practical functions of your BRESSER Professional Wi-Fi weather station with this additional/replacement base station. FEATURES WiFi connection with internet time synchronisation and support for firmware updates Publish your weather data on Wunderground or Weathercloud Indoor temperature (°C/ °F) and humidity (%) Displays the outdoor temperature (°C/ °F) and humidity (%) Light intensity (Klux / Kfc / W/m²) Displays the current UV index, exposure level and recommended protection Displays the sunburn time (mins) based on the current UV level Wind direction and speed (m/s; km/h; Knoten; mph) Beaufort index (scale for measuring wind speed) Air pressure with 24-hour history (hPa/inHg/mmHg) Rainfall with history (day/week/month) Graphical weather forecast for next 12-24 hours Weather index (‘feels like’ function, dew point, heat index, wind chill factor) Trend indicator shows the weather trends for the next few minutes Visual comfort level indicator for room temperature and humidity Phases of the moon Sunrise and sunset times Alarm with snooze function (5 minutes) and ice/frost warning Weekday alarm Min./max. memory (up to 24 hours) LED backlight, amber-coloured Wall bracket and table stand Supports a 7-in-1 sensor and up to 7 indoor sensors (sensors are not included) Dimensions: 215 x 172 x 29 mm and weight: 639 g Power supply: Power adapter and 3x AAA batteries as backup batteries (batteries are not included) Integrated Wi-Fi transmission to AWEKAS Security protocol: supports WPA3 encryption for firmware version 1.09 and above DELIVERY CONTENT Base station with stand Power adapter Instruction manual

Available

£86.13*