MikroCam PRO HDMI camera 5MP

The New BRESSER Science Infinity is the new top of the range of the biology microscope series by BRESSER. It is based on infinitely corrected planachromatic objective lenses with superb image quality. Because of the modern design and optics the installation of accessories is very simple and one has many options. The WF 10x eyepieces offer a large visual field of 22mm and are also suitable for spectacle wearers. For protection purposes the eyepieces are rubber coated. The interpupillary distance can be adjusted from ca. 55mm to 75mm. Dioptre adjustments are possible with both eyepieces.The bright and durable LED illumination is dimmable and also very practical for darkfield microscopy*.The Full Köhler illumination is adjustable with the built-in luminous-field diaphragm and the vertically and horizontally adjustable Abbe condenser (numerical aperture 1.25, with iris diaphragm). An imprint of the different possible magnifications on the condenser makes the adjustment of the iris diaphragm very fast and precise.Coaxial pinions drive the stage and focus which enables ergonomic operation of the microscope.The trinocular tube enables the direct attachment of a c-mount camera or MikroCam.SCOPE OF DELIVERYMicroscope with integrated LED illuminationplanachromatic objectives, infinity corrected (4x, 10x, 40x, 100x oil)2x eyepieces (WF 10x)Mains adapterManualImmersion oilDust cover*only with optional accessories

The BRESSER DST-0745 is a special microscope that is operated with a c-mount camera (camera not included). This allows direct viewing on a screen. Due to the vertically installed optics, there is no shifting of the image when focusing. This is especially useful for "focus stacking" shots. The zoom is continuously adjustable from 0.7x - 4.5x. A coarse and fine focus adjustment facilitates focusing, especially at high magnifications. The convenient and user-friendly operation makes the digital microscope particularly suitable for daily use in the workshop. Measurements, quality control of surfaces or inspection of components and raw materials are easy with the workshop microscope. Insects, plants and rocks are also impressively displayed. The DST-0745 workshop microscope is not suitable for visual observation. It can only be used in combination with a MikroCam c-mount microscope camera. It is designed for camera sensors of about 1/2". Smaller sensors can be used without problems. With larger sensors there is vignetting, which becomes somewhat less at higher magnifications. Due to the two flexible incident light lamps, the light can be optimally positioned. The transmitted light illumination helps when observing transparent objects. The brightness of both illuminators can be adjusted in five steps. The magnification of a USB camera differs from the magnification of the lens. It depends, among other things, on the sensor size and the display on a monitor. It can be compared to macro lenses with macro factor 0.7:1 up to 4.5:1. Compatible MikroCam cameras: 5914131 MikroCam SP 1.3 MP 5914320 MikroCam SP 3.1 MP 5914520 MikroCam SP 5.0 MP 5914004 MicroCamII 5914020 MicroCamII 5914310 MicroCamII 5914912 MicroCamII 5914180 MikroCam PRO HDMI 5914190 MikroCam PRO HDMI 5MP 5914195 MikroCam Pro HDMI Autofocus FEATURES Designed for C-mount microscope cameras Up to 1/2" sea sensor size Continuous zoom (0.7x - 4.5x) Two flexible incident light LED lamps LED transmitted light illumination Adjustable brightness SCOPE OF DELIVERY Zoom lens head 0.7x - 4.5x Stand with incident and transmitted light illumination Object plate glass (one side frosted) Object plate plastic (one side white, one side black) Power supply unit, operating instructions, dust cover

The Full HD display is the ideal addition to the BRESSER MikroCam Pro HDMI and MINI HDMI.The display can be mounted directly on the camera using an adjustable bracket. It provides brilliant images without artefacts, as the display has the same resolution as the output image of the camera. With the MikroCam and HDMI display set, almost any trinocular microscope with a camera connection can be upgraded to a digital microscope. This means that observations can be made independently of a PC. The size of the display has been optimised so that the microscope user can microscope as usual and view the image on the monitor at the same time. The display provides optimum image quality with a large viewing angle of 178°! This means that several people can view the image without any loss of quality. The image from the microscope camera is always displayed on the HDMI screen without delay and with a high refresh rate of 60 FPS. The quality of the image displayed using an HDMI microscope camera on an HDMI monitor is therefore usually better than when using a USB camera on a laptop or PC. This is particularly advantageous when delicate work is done under microscopic control. Many users also benefit from the improved ergonomics when the image can be viewed on the HDMI display. Higher magnifications with their high numerical aperture are particularly unpleasant for users with eye problems such as mouches volantes (vitreous opacities). Digital viewing can provide a remedy here. The display can be operated with the same power supply unit as the camera using the enclosed Y-cable. A suitable, short, angled HDMI cable is also included to avoid cable clutter in the workplace. Mounting on a MikroCam PRO or MINI is carried out using two screws. Screws and tools are included in the scope of delivery. FEATURES 16:9 Full HD monitor with a resolution of 1920 x 1080 pixels Active area: 16.5 x 29.4 cm Easy mounting directly on a MikroCam PRO or MINI Wide viewing angle (178°) No separate power supply unit required SCOPE OF DELIVERY 13.3" display HDMI cable Y-cable for power supply via camera power supply unit Mounting screws (2 pieces) Allen (hex) key Instruction manual

In the microscope's basis, there are a transmitted light LED illuminator (3 W) as well as the power supply and the continuous adjustable dimmer for transmitted light. The trinocular head allows to mount a SLR camera or a USB microscope camera with an optional adapter. The inclination of the eyepiece tubes is 30°. The fluorescence attachment includes a special LED wheel with four different lamps (green, blue, violett, ultraviolett), a filter wheel and a radiation shield. The LED lamps produces the exciting radiation in order to get fluorescence. Fluorescence microscopy is done e. g. in biology, medicine, microchemistry, geology, semiconductor production and environmental protection. The Science ADL 601F LED is an instrument with an excellent value for money. It has also the other features, which are typical for high-quality microscopes: fourfold objective nosepiece, lengthwise and cross moveable stage, coaxial focusing knobs (concerning fine drive: 200 µm / full turn), adjustment of eye relief, diopter adjustment and the phototube. Optional available, general accessories are the wide field eyepieces (WF10x, WF15x), the dividing eyepiece (WF10x), and dark field condensers (dry and oil). FEATURESType: biology MicroscopeView: TrinocularApplication range: Biology, Gemology, Botany, Education, Teaching, Entomology, Forensic, Research, Laboratory, Medical science, Pathology, Veterinary medicineIllumination:  LEDLevel: Intermediate, ExpertWarranty: 2 years1.25 Abbe-condenser with iris diaphragm and filter holderIncl. adjustable mechanical stage Integr. dimmerAdjustable eye reliefDiopter adjustment SCOPE OF DELIVERYMicroscope4 DIN-objectives (PL 4x, PL 10x, PL 100x oil, PL-FL 40x)2x 10x eyepieces 1.25 Abbe-condenser with iris diaphragm and filter holderFluorescence attachment with LED wheel (green, blue, violett, ultraviolett) and respective emission filtersImmersion oilFull Koehler illumination for transmitted light

High-quality dissecting tool set for amateur and professional purposes. Made in Germany! No matter if amateur microscoper or professional - working with inferior tools is unsatisfying. For that reason, we offer these dissecting tools to you. They are made from Solingen steel and meet the highest quality demands. Accessories • 1 Spatula • 1 Scalpel • 1 Tweezer • 1 Scissor • 1 Slice catcher • 2 Preparation Needles • Imitation leather case

Microscope slides with a micrometer scale are used for the calibration for measurements.They are used in combination with a micrometer eyepiece or a measurement software (for cameras) in order to measure preparations. The broad scale is suitable for lower magnifications, the fine scale for higher magnifications.

C-Mount MikroCam adapter for BRESSER Science microscopes connects the BRESSER MikroCam to many BRESSER Science microscopes. The camera can be connected directly. If you want to use a reducing lens 0.5x or 1.0x, the additional adapter with item code 5942030 is necessary.Suitable for the following BRESSER microscopes:BioScience Trino (5750600)Science TRM-301 (5760100)Science ADL-601P (5770200)Science ADL-601F (5770500)Science MPO-401 (5780000)Science IVM-401 (5790000)Science MTL-201 (5807000)Science ETD-301 (5806300)SCOPE OF DELIVERY1x adapter

High resolution deep sky camera with large SONY Exmor IMX428 CMOS sensor and active cooling for telescopes with short and moderate focal lengths. Enter the world of astrophotography now. With the new EXPLORE SCIENTIFIC DEEP SKY ASTRO camera you get a modern complete package for the comfortable shooting of astro photos and videos. Finally, an easy-to-use camera for capturing galaxies, star clusters, the moon and even planets with extreme high sensor sensivity and extreme low sensor noise. The high sensitivity enables very short exposure times and the freezing of the air turbulence (seeing) in planetary images. Thanks to the fast USB 3.0 computer interface, all image data is transferred within a few seconds. Long waiting times are now history. Simply connect the camera to your telescope using the T2 female thread (M42.0.75mm) or the supplied 2'' (50.8mm) plug-in adapter and after installing the drivers and the included EXPLORE Capture recording and editing software, you are ready to take the first real astro photos with a highly specialized camera for your application.  The EXPLORE Capture pro software included in delivery not only offers the basic functions required for image and video capture, but also many helpful special functions for image post-processing and camera setup. Functions such as live image display, exposure settings, white balance, dark image print, stacking, timelapse recording and much more can be configured individually. Especially the very sophisticated software makes your entry into astrophotography really easy. With the automatic settings you can produce absolutely presentable results without any previous knowledge. If you like, simply switch off the automatic settings and gradually dare to adjust the individual professional settings. The new EXPLORE SCIENTIFIC DEEP SKY camera has a highly sensitive and very low-noise SONY Exmor IMX428 CMOS sensor which is additionally cooled down to 40°C below ambient temperature by the two-stage thermoelectric cooling. In contrast to normal DSLR cameras, this guarantees much lower noise and fewer hot pixels in your shots. The images are not only much sharper and more brilliant, but also contain more usable image information. Through the controlled setting of the desired camera temperature, the creation of dark frames under reproducible shooting conditions is possible at any time. The large-format CMOS sensor with 17,6mm diagonal also allows large image fields and simplifies the adjustment and centering of objects considerably. The camera has a built-in USB hub with 2 x USB2.0 ports at the rear. Connect your additional autoguider camera or motor focus etc. via a short USB cable and reduce the risk of cable spaghetti and cable breaks. Separate cable connections between your accessories and your computer are no longer necessary. A sturdy hard case for the camera plus accessories is also included. IMPORTANT NOTES: Don't get confused by the megapixel data and the contrary price structure. In the field of astronomy, the key criterion is not the sensor resolution but the maximum light sensitivity. The main goal is to capture as much light as possible in a short time.DOWNLOAD latest camera software and drivers see download folder "Manuals" or here: http://www.touptek.com/download/showdownload.php?lang=en&id=2 Sample photos made by Lóránd Fényes in Hungary: https://fenyeslorand.hu/asztrofotok/Field of view for different focal lengths in arc minutes and degrees: 400 mm - 124´x 85´ (2.1 x 1.4 degrees) 500 mm - 99´x 68´ (1,7 x 1.1 degrees) 600 mm - 82´x 56´ (1.4 x 0.9 degrees) 700 mm - 70´x 49´ (1.2 x 0.8 degrees) 800 mm - 62´x 43´ (1.0 x 0.7 degrees) 900 mm - 55´x 38´ (0,9 x 0.6 degrees) 1000 mm - 49´x 34´ (0.8 x 0.6 degrees) 1250 mm - 40´x 27´ (0.7 x 0.5 degrees)1500 mm - 55´x 23´ (0.6 x 0.4 degrees) 1750 mm - 28´x 19´ (0.5 x 0.3 degrees) 2000 mm - 25´x 17´ (0.4 x 0.3 degrees) FEATUREScamera type: ASTRO Camera  7.1MP ATR3CMOS07100KPA data output: single pictures and video image Sensor: SONY Exmor IMX428 CMOS Color Sensor resolution: 3200x2200 binning: 1x1 / 2x2 frame rate per second (FBS): 51 / 133 physical sensor size in pixels: 3200 x 2200 / 1600 x 1100megapixel: 7.1 MP sensor size: 14.4 x 9.9 mm (1.1 inch) pixel size: 4.5 µm x 4.5 µm bit depth: 12 Bit backfocus: 17,5 mm  shutter Type: global shutterinternal camera memory: DDR 3 RAMthermoelectric cooling with fan: yes, up to 40°C below ambient temperature adjustable exposure times: 150µs to 60min operating temperature: -10 to +50°C (30-80% RLH) cable length USB 3.0: 150cm DC cable length power supply: 200cm CNC machined aluminium housing camera diameter: 80mm; length: 102mm camera weight: 0,53 kg camera connection diameter: 2.0 inch ( 50.8mm) camera connection thread: T2 (M42x0,75mm) filter thread: Yes, 2.0 inch in receptacle camera connection to PC: USB 3.0 built-in USB hub with 2 x USB 2.0 ports power supply: Power supply 12 Volt 3,0 Ampere included software: EXPLORE Capture included camera driver and ASCOM driver includedoperating system: WINDOWS 10 + 11PC requirements: CPU Intel Core2 2.8Ghz or higher / 2 GB Ram / USB 3.0 SCOPE OF DELIVERYDEEP SKY ASTRO Camera 7.1MP telescope adapter T2 thread to 2.0'' (50,8mm) USB 3.0 connection cable 150cm power supply 230V/12V3,0A dust cap software CD hard case instruction manual