LUNT O-ring 34mm for Pressure-Tuner at MT & THa solar telescopes

Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMSFor example, if the O-rings have been changed on a Pressure-Tuner of a Lunt Solar Systems H-alpha solar telescope, the Pressure-Tuner can be re-greased with this grease. The grease can be applied to the piston with the O-rings and to the threads of the brass cylinder on the Pressure-Tuner. It keeps the Pressure-Tuner running smoothly and seals it.Please note:Do not use too much grease inside the brass cylinder. The grease must not get into the air passage at the bottom of the brass cylinder, otherwise the Etalon could be damaged in the worst case.FEATURESLithium grease with Teflon contentVery good sealing propertiesHigh adhesion and good corrosion protectionTemperature stable from -20 to +120° CelsiusConstant viscosity during temperature fluctuationsSCOPE OF DELIVERYSpare part: Grease for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems

​Spare part for blocking-filters from LUNT SOLAR SYSTEMS, suitable for B400, B500, B600, B1200 and B1800 blocking-filters.The H-alpha telescopes and filter systems from Lunt Solar Systems each include a blocking-filter. The blocking-filters have a blue colored filter part on the side facing the telescope. This blue colored filter parts may become a milky white layer at older blocking-filters if the blocking-filter was storded at high air humidity for some time. Please always store H-alpha telescopes and filters as dry as possible. If this blue colored filter part has become a milky white layer, it can be replaced with this spare part. The replacement is easy and can be done by the user himself. Installation instructions can be found here under the "Manuals" tab as a PDF for download.Please note that this replacement part can only be used on Lunt Solar Systems blocking-filters B400 to B1800. If the problem happens with the large B3400 blocking-filter, the B3400 must be sent to our service department for repair.FEATURESDiameter: 20mmCannot be used separately, only as spare part at blocking-filters from Lunt Solar SystemsFor B400, B500, B600, B1200 and B1800 blocking-filtersIt does not matter if the blocking-filters are installed in 90° zenith-mirrors or straight extension-tubesSCOPE OF DELIVERYSpare part 20mm blue glass for B400 to B1800 blocking-filters

Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMSTwo rubber O-rings are installed into the Pressure-Tuner of Lunt Solar Systems solar telescopes to seal the air-pressure tuning system. Over time, the rubber of this O-rings can age and become porous, whereby the air-pressure can then no longer be maintained. When this happens, a old O-ring can be replaced by this spare part. The replacement is simple and can be done by the user. Installation instructions can be found here under the tab "Manuals" as a PDF file for download.Please be sure to note:Depending on the production series, the diameters of the Pressure-Tuner pistons can vary slightly. There are pistons for O-rings with 32mm inner diameter and 40mm outer diameter, and pistons for O-rings with 34mm inner diameter and 42mm outer diameter. Please check the diameter of your old O-rings, this spare part is an O-ring with 32mm inner diameter and 40mm outer diameter.If you need the larger O-ring with 34mm inner diameter and 42mm outer diameter, this is the spare part with item number 0558340.The LS50THa telescopes have Pressure-Tuners with smaller diameters, for these you will need replacement O-rings with item number 0558320.After replacing a O-ring, the piston and cylinder of the Pressure-Tuner can be re-greased with grease available under item number 0558350.FEATURESInner diameter: 32mmOuter diameter: 40mmCannot be used separately, only as a replacement part on the Pressure-Tuner of MT and THa telescopes from Lunt Solar Systems.It does not matter what blocking-filter is at the MT or THa telescope.SCOPE OF DELIVERYSpare part one O-ring with 32mm inner diameter and 40mm outer diameter for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems

​Spare part for Pressure-Tuner of LS50THa H-alpha solar telescopes from LUNT SOLAR SYSTEMSA rubber O-ring is installed into the Pressure-Tuner of Lunt Solar Systems LS50THa solar telescopes to seal the air-pressure tuning system. Over time, the rubber of this O-ring can age and become porous, whereby the air-pressure can then no longer be maintained. When this happens, the old O-ring can be replaced by this spare part. The replacement is simple and can be done by the user. Installation instructions can be found here under the tab "Manuals" as a PDF for download.After replacing the O-ring, the piston and cylinder of the Pressure-Tuner can be re-greased with grease available under part number 0558350.Please note that this spare part can only be used on the Lunt Solar Systems LS50THa H-alpha solar telescopes. If the problem occurs on the larger THa or MT series telescopes, the larger O-rings with part numbers 0558330 or 0558340 must be used there.FEATURESInner-diameter: 31mmOuter-diameter: 39mmCannot be used separately, only as a replacement part on the Pressure-Tuner of the LS50THa telescopes from Lunt Solar Systems.It does not matter what blocking filter is at the LS50THaSCOPE OF DELIVERYSpare part one O-ring for pressure tuner of LS50THa

One of the most important obstacles for the exploration of the night sky is the brightening of the night sky by artificial lights, such as streetlights. The night sky is not really dark in the vicinity of towns or cities, which reduces the visibility of objects beyond the solar system enormously. Depending on the type of the celestial object, it is possible to dramatically increase the contrast by blocking annoying artificial light. The EXPLORE SCIENTIFIC UHC filter "zeros in" on the wavelengths of so-called emission nebulae. Those objects glow in special colours - their emission lines. Those emission lines are linked to chemical elements - in this case hydrogen at 486nm and 656nm, plus oxygen at 496nm and 501nm. The EXPLORE SCIENTIFIC UHC nebula filter blocks all other colour wavelengths (and thereby nearly all of artificial light) and only the emission line of the hydrogen and oxygen can pass the filter. The result is astonishing: suddenly nebulae are visible at locations that were completely invisible from, without filters. In suburban skies, for example the Owl-nebula M97, the Veil-nebula NGC 6992 or even the bright Dumbell-nebula M27 are not clearly visible. Using this filter allows you to see nebulae and their structures in much finer detail. A must for every visual observer. The Explore Scientific nebula filters come with a individual test certificate - your guarantee to receive a premium filter.

With the BRESSER Solar Eclipse Glasses, you can experience one of nature's most captivating events safely and effortlessly. Whether it's an annular, total, or partial eclipse, the sight of the moon crossing in front of the sun is always breathtaking. Designed to protect your eyes, these specialist glasses are crafted in the USA to meet the highest safety standards. BRESSER Eclipse Glasses: Your safe window to the sun The glasses feature premium-quality white light filter film that effectively blocks harmful UV and IR rays. This ensures a bright and natural yellow image of the sun. Thanks to their sturdy construction, these glasses are built for repeated use. You can even use them to spot large sunspots or enjoy the rare sight of planes flying in front of the sun. Be prepared for the next eclipse and enjoy safe solar viewing with the BRESSER Solar Eclipse Glasses. FEATURES Specialist glasses for safe solar eclipse viewing Provides a natural, bright yellow image of the sun Ideal for safe visual solar observation Durable and resistant to damage Ready to use immediately Complies with EN ISO 12312-2:2015 standards, verified by independent testing at ICS INC. Laboratories SCOPE OF DELIVERY 3x Solar Eclipse Glasses

Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMSTwo rubber O-rings are installed into the Pressure-Tuner of Lunt Solar Systems solar telescopes to seal the air-pressure tuning system. Over time, the rubber of this O-rings can age and become porous, whereby the air-pressure can then no longer be maintained. When this happens, a old O-ring can be replaced by this spare part. The replacement is simple and can be done by the user. Installation instructions can be found here under the tab "Manuals" as a PDF file for download.Please be sure to note:Depending on the production series, the diameters of the Pressure-Tuner pistons can vary slightly. There are pistons for O-rings with 32mm inner diameter and 40mm outer diameter, and pistons for O-rings with 34mm inner diameter and 42mm outer diameter. Please check the diameter of your old O-rings, this spare part is an O-ring with 32mm inner diameter and 40mm outer diameter.If you need the larger O-ring with 34mm inner diameter and 42mm outer diameter, this is the spare part with item number 0558340.The LS50THa telescopes have Pressure-Tuners with smaller diameters, for these you will need replacement O-rings with item number 0558320.After replacing a O-ring, the piston and cylinder of the Pressure-Tuner can be re-greased with grease available under item number 0558350.FEATURESInner diameter: 32mmOuter diameter: 40mmCannot be used separately, only as a replacement part on the Pressure-Tuner of MT and THa telescopes from Lunt Solar Systems.It does not matter what blocking-filter is at the MT or THa telescope.SCOPE OF DELIVERYSpare part one O-ring with 32mm inner diameter and 40mm outer diameter for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems

NEW - now including a high-quality aperture Solar-filter for safe observation of sunspots, eclipses and planet transits. Great telescope for night and solar observation.The BRESSER Messier 8'' dobsonian is simply a breakthrough. Despite of its low price this telesccope offers a versatility and quality rivaling a lot more expensive telecopes. The optical diameter of 203mm (8'') does not restrict your observations on solar system objects like the moon or the planets - you can reach farther into the sky and explore globular and open clusters, nebulae and galaxies. With that telescope those objects are beginning to show structures: globular clusters are no longer only fuzzy blobs, but are resolved into masses of individual stars. Nebulae, that can only be barely detected in smaller scopes, reveal structures within. The telescope is setting a new standard in versatility: the excellent Hexafoc focuser boosts a free diameter of 65mm (2,5'') so that you do not have vignetting in big widefield eyepieces that is caused by smaller focuser barrels. The big altitude wheels handle those big, heavy eyepieces without problems - and when you intend to load even more (like a binocular viewer with two eyepieces) then you can move the tube in its tube rings and achieve balance within seconds. The excellent rigidity of the focuser makes focusing a snap - even for astrophotography. This is another virtue of this highly versatile telescope system: you can remove the altitude wheels from the tube rings, attach a dovetail and use the optical tube on a equatorial mount for astrophotography - in minutes. The focuser is handling even heavy cameras tilt and shifting-free. You are extremely demanding in your image sharpness? No problem - with the optional 10:1 gear reduction sharp images are easy. If you consider, that the focuser is that part of the telescope that is used most often, you will recognize the quantum leap this Hexafoc represents in a telescope of this price range. With the included standard accessories (6x30 finder and 25mm SPL-eyepiece) the telescope is ready for observing. If you need to transport or store the telescope as compact as possible you will like this: the rocker box of the 8'' BRESSER Messier assembles and disassembles extremely easy and fast due to the use of metal standard furniture fasteners. So you can transform the bulky rocker box into a handy flat package of boards. This telescope is setting a new standard in usability, versatility and performance in its price class.Please note: Reflector telescopes with optical design Newton are very good for astronomical observing at the starry night sky. But these telescopes are not well usable for observing landscape and nature during daylight. Therefore we suggest BRESSER refractor (lens) telescopes for landscape and nature observing. FEATURES Optical design: reflector telescopeMirror diameter: 203 mm / focal length: 1218 mm / F/6Maximum recommended magnification: 406x telescope for night and solar observation high quality BRESSER Newton optics parabolic primary mirror primary mirror diameter: 203 mm focal length: 1218 mm 2,5'' HEXAFOC focus primary mirror out of special-purpose glass with little thermal expansion shifting-free focusing, even with heavy accessories easy to move the tube dismountable rocker box optics can be attached to other mountings differently sized adjusting- and lock-screws SCOPE OF DELIVERY newtonian reflector aperture solar-filter 6x30 viewfinder 25mm SuperPloessl eyepiece (Ø 31,7 mm / 1,25'') 1 extension shell 37,5mm for 2.5'' Hexafoc 1 eyepiece adapter Ø 31,7 to 50,8 mm 2 tube clamps 2 altitude wheels 1 rockerbox with 2 ground boards and assembly material Dimension of shipping box No.1: 125x38x41cm - 15.0kg Dimension of shipping box No.2: 54x54x22cm - 13.5kg

Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMSFor example, if the O-rings have been changed on a Pressure-Tuner of a Lunt Solar Systems H-alpha solar telescope, the Pressure-Tuner can be re-greased with this grease. The grease can be applied to the piston with the O-rings and to the threads of the brass cylinder on the Pressure-Tuner. It keeps the Pressure-Tuner running smoothly and seals it.Please note:Do not use too much grease inside the brass cylinder. The grease must not get into the air passage at the bottom of the brass cylinder, otherwise the Etalon could be damaged in the worst case.FEATURESLithium grease with Teflon contentVery good sealing propertiesHigh adhesion and good corrosion protectionTemperature stable from -20 to +120° CelsiusConstant viscosity during temperature fluctuationsSCOPE OF DELIVERYSpare part: Grease for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems

The BRESSER First Light AR-102/1000 telescope is ideal for both ambitious beginners and experienced astronomers. Discover the stunning features of Orion Nebula, which is located at a distance of 1500 light years (14,200,000,000,000 km) from earth! The stable mount keeps the telescope stable, even at higher magnifications. Thanks to the high-quality mechanics, you can take your own photos of the moon and marvel at the dividing line between night and day (terminator). The refractor telescope features an equatorial mount (also called a parallactic mount). Thanks to this two-axis mechanism, it is possible to compensate for the rotation of the earth, enabling you to precisely track your desired celestial object. The telescope also comes with a wide range of accessories for exploring the night sky, including a prism for an upright and laterally correct image. FEATURES High-quality achromatic refracting telescope Diameter: 102 mm / Focal length: 1000 mm F/9.8 EQ-3 equatorial mount Height-adjustable tripod with accessory shelf Made primarily of metal Excellent focuser Prism for an upright and laterally correct image Includes wide range of accessoriesDELIVERY CONTENT First Light AR-102/1000 optical tube EQ3 mount Tripod with accessory shelf 2 eyepieces (PL10 & PL25) LED red dot finder 90° upright prism 3x Barlow lens Smartphone holder

Electronic Control unit with USB connection for one LUNT Pressure-Tuner system.The PC-USB is a microprocessor controlled pressure control system that can be retrofitted to any LUNT instrument (except LS50THa) with Pressure-Tuner (PT), without return to the Lunt facility. A simple air-pipe connects the PC-USB to the Pressure-Tuner. All existing PT systems (except LS50THa) can be retrofitted via an included adapter to the pressure tuner knob. The PC-USB can be used at any altitude.The PC-USB controller can be manually operated directly by the control panel at the housing, or via a computer by USB connection (Windows 7 or higher needed). A USB cable with USB-B plug is necessary for operating by a computer, this USB cable is not included. You will find the software for download on this webpage above at the tab "Manuals".Upon power up the PC-USB will go thru a systems vent and ambient pressure set mode. This will take around 60 seconds. The PC-USB is a simple 2 button system. One button for increasing and one button for decreasing the PT pressure. Digital feedback and indicator lights are provided. The PC-USB is accurate to 0.027 Bar (0.4 PSI), providing very precise control of the pressure setpoint. The PC-USB will auto-compensate for fluctuations in internal pressure changes due to significant changes in temperature. The PC-USB can be user programmed to center wavelength set point. Due to the sealed nature of the system, the center wavelength set point will remain constant at any altitude at a given set pressure point. Because the PC-USB can provide closed-loop feedback of internal etalon pressure users can correlate change in pressure to doppler shifted events.Normally the telescope shakes while you are tuning mechanically. Especially if you use high magnification, for example for observing the Doppler effect at a filament. With the PC-USB system there will be absolutely no shaking of the telescope while tuning at all magnifications, so observing Doppler shifted events will become more comfortable.The PC-USB can run continuously on internal battery power for more than 8 hours. It has external power input (15V DC) that can power the unit and charge the internal batteries simultaneously.SCOPE OF DELIVERYLUNT PC-USB Control SystemAdapter for PT knob3m air-pipeAC-adapter (with Euro-plug)Please note that this controller is not compatible with LS50THa series telescopes!