LUNT LS60FHa/B3400 H-alpha solar filter

Product Highlights

Transforms a normal telescope up to 3060mm focal length into an H-alpha solar telescope showing prominences & more

  • 60mm special filter for the observation of the sun
  • For telescopes up to 3060mm focal length & 2" focuser
  • Additional adapter plate required for mounting
  • Shows protuberances & more details on the sun
  • Bandwidth less than 0.75 Angstrom
  • Filter system with H-alpha Etalon & blocking-filter
  • For visual sun observation & photography
  • Absolutely safe, no danger to the eyes

£6,498.00*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Privacy
Product number: 0550257
GTIN/EAN: 4007922034621

With BRESSER, you can enjoy a smooth introduction to the vast world of astronomy. Our detailed information ("Telescope Guide") provides valuable tips for beginners— but even experienced astronomers can use the information we provide (e.g., tables for the geographical latitude of all major world cities) as a reference.

Here is the table of contents of the comprehensive BRESSER Telescope Guide:

With BRESSER, you can enjoy a smooth introduction to the vast world of astronomy. Our detailed information ("Telescope Guide") provides valuable tips for beginners—but even experienced astronomers can use the information we provide (e.g., tables for the geographical latitude of all major world cities) as a reference.

Here is the table of contents of the comprehensive BRESSER Telescope Guide:

Product information "LUNT LS60FHa/B3400 H-alpha solar filter"
60mm H-alpha solar filter system with B3400 blocking filter, for front mounting at telescopes with 2" focuser, and up to 3060mm focal length.

The LS60FHa H-alpha Etalon filter system with 60mm aperture (no central obstruction) for use on any refractor and many other telescopes. Because the LS60FHa has an estimated bandwidth of <0.75 Angstrom it is capable to providing high contrast views of both solar surface and edge detail (prominences).
The system includes the B3400 blocking filter, which is usable for telescopes up to 3060mm focal length. The blocking filter is installed in a straight extension tube for 2" focuser. This extension tube is equipped with a reception for 2" eyepieces and a adapter for 1.25" eyepieces.

Adding an additional available double-stack Etalon system will reduce the bandwidth to ~<0.55 Angstrom.

FEATURES
  • Aperture: 60 mm
  • No central obstruction
  • Bandwidth: <0.75 Angstrom
  • Tuning: tiltable Etalon
  • Housing diameter: 95 mm
  • Length: 85 mm
  • Weight: 0.85 kg
  • Front thread: M90x1 female thread
  • Rear thread: M90x1 male thread
  • Blocking filter: B3400 in extension tube for 2" focuser
  • Maximum focal length of telescope: 3060 mm
SCOPE OF DELIVERY
  • LS60FHa solar filter
  • B3400 Blocking Filter (for 2" focuser) in extension tube
  • Transport case
  • Instruction manual

Material: Aluminium, Glass

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Accessories

LUNT Adapter-Plate LS50/60FHa for up to 80mm Ø
Adapter plate for mounting a LUNT LS50FHa or LS60FHa front-filter at a telescope with up to 80mm front outer diameter.With this adapter you can mount a LS50FHa or LS60FHa at your existing astronomical telescope with up to 80mm outer diameter, in order to use this telescope for solar observing in H-alpha. The adapter is plugged onto the front of your telescope, and the filter can be screwed onto the adapter.PLEASE NOTE:This article no. 0557410 gives only the price for a complete range of different adapter-plates up to 80mm diameter. The real adapter-plate will be manufactured exactly for your telescope. Therefore we need the exact outside diameter of your telescope or the dew shield!When ordering, you will find a field for comments, please note there the appropriate diameter!Then we will manufacture a adapter-plate for the diameter that you have noted. Manufacturing time will be 2 to 3 weeks.If you have any questions, you can contact us by e-mail or telephone.SCOPE OF DELIVERY1x adapter plate manufactured by your specifications(Filter not included)Delivery time 2-3 weeks

£92.00*
LUNT Adapter-Plate LS50/60FHa to 81 - 100mm Ø
Adapter plate for mounting a LUNT LS50FHa or LS60FHa front-filter at a telescope with 81mm to 100mm front outer diameter.With this adapter you can mount a LS50FHa or LS60FHa at your existing astronomical telescope with 81mm to 100mm outer diameter, in order to use this telescope for solar observing in H-alpha. The adapter is plugged onto the front of your telescope, and the filter can be screwed onto the adapter.PLEASE NOTE:This article no. 0557411 gives only the price for a complete range of different adapter-plates of 81mm to 100mm diameter. The real adapter-plate will be manufactured exactly for your telescope. Therefore we need the exact outside diameter of your telescope or the dew shield!When ordering, you will find a field for comments, please note there the appropriate diameter!Then we will manufacture a adapter-plate for the diameter that you have noted. Manufacturing time will be 2 to 3 weeks.If you have any questions, you can contact us by e-mail or telephone.SCOPE OF DELIVERY1x adapter plate manufactured by your specifications(Filter not included)Delivery time 2-3 weeks

£111.00*
LUNT Adapter-Plate LS50/60FHa to 101 - 120mm Ø
Adapter plate for mounting a LUNT LS50FHa or LS60FHa front-filter at a telescope with 101mm to 120mm front outer diameter.With this adapter you can mount a LS50FHa or LS60FHa at your existing astronomical telescope with 101mm to 120mm outer diameter, in order to use this telescope for solar observing in H-alpha. The adapter is plugged onto the front of your telescope, and the filter can be screwed onto the adapter.PLEASE NOTE:This article no. 0557412 gives only the price for a complete range of different adapter-plates of 101mm to 120mm diameter. The real adapter-plate will be manufactured exactly for your telescope. Therefore we need the exact outside diameter of your telescope or the dew shield!When ordering, you will find a field for comments, please note there the appropriate diameter!Then we will manufacture a adapter-plate for the diameter that you have noted. Manufacturing time will be 2 to 3 weeks.If you have any questions, you can contact us by e-mail or telephone.SCOPE OF DELIVERY1x adapter plate manufactured by your specifications(Filter not included)Delivery time 2-3 weeks

£127.00*
LUNT Adapter-Plate LS50/60FHa to 121 - 140mm Ø
Adapter plate for mounting a LUNT LS50FHa or LS60FHa front-filter at a telescope with 121mm to 140mm front outer diameter.With this adapter you can mount a LS50FHa or LS60FHa at your existing astronomical telescope with 121mm to 140mm outer diameter, in order to use this telescope for solar observing in H-alpha. The adapter is plugged onto the front of your telescope, and the filter can be screwed onto the adapter.PLEASE NOTE:This article no. 0557413 gives only the price for a complete range of different adapter-plates of 121mm to 140mm diameter. The real adapter-plate will be manufactured exactly for your telescope. Therefore we need the exact outside diameter of your telescope or the dew shield!When ordering, you will find a field for comments, please note there the appropriate diameter!Then we will manufacture a adapter-plate for the diameter that you have noted. Manufacturing time will be 2 to 3 weeks.If you have any questions, you can contact us by e-mail or telephone.SCOPE OF DELIVERY1x adapter plate manufactured by your specifications(Filter not included)Delivery time 2-3 weeks

£149.00*
LUNT Adapter-Plate LS50/60FHa to 141 - 160mm Ø
Adapter plate for mounting a LUNT LS50FHa or LS60FHa front-filter at a telescope with 141mm to 160mm front outer diameter.With this adapter you can mount a LS50FHa or LS60FHa at your existing astronomical telescope with 141mm to 160mm outer diameter, in order to use this telescope for solar observing in H-alpha. The adapter is plugged onto the front of your telescope, and the filter can be screwed onto the adapter.PLEASE NOTE:This article no. 0557414 gives only the price for a complete range of different adapter-plates of 141mm to 160mm diameter. The real adapter-plate will be manufactured exactly for your telescope. Therefore we need the exact outside diameter of your telescope or the dew shield!When ordering, you will find a field for comments, please note there the appropriate diameter!Then we will manufacture a adapter-plate for the diameter that you have noted. Manufacturing time will be 2 to 3 weeks.If you have any questions, you can contact us by e-mail or telephone.SCOPE OF DELIVERY1x adapter plate manufactured by your specifications(Filter not included)Delivery time 2-3 weeks

£167.00*
LUNT Adapter-Plate LS50/60FHa to 161 - 180mm Ø
Adapter plate for mounting a LUNT LS50FHa or LS60FHa front-filter at a telescope with 161mm to 180mm front outer diameter.With this adapter you can mount a LS50FHa or LS60FHa at your existing astronomical telescope with 161mm to 180mm outer diameter, in order to use this telescope for solar observing in H-alpha. The adapter is plugged onto the front of your telescope, and the filter can be screwed onto the adapter.PLEASE NOTE:This article no. 0557415 gives only the price for a complete range of different adapter-plates of 161mm to 180mm diameter. The real adapter-plate will be manufactured exactly for your telescope. Therefore we need the exact outside diameter of your telescope or the dew shield!When ordering, you will find a field for comments, please note there the appropriate diameter!Then we will manufacture a adapter-plate for the diameter that you have noted. Manufacturing time will be 2 to 3 weeks.If you have any questions, you can contact us by e-mail or telephone.SCOPE OF DELIVERY1x adapter plate manufactured by your specifications(Filter not included)Delivery time 2-3 weeks

£186.00*
LUNT Adapter-Plate LS50/60FHa to 181 - 200mm Ø
Adapter plate for mounting a LUNT LS50FHa or LS60FHa front-filter at a telescope with 181mm to 200mm front outer diameter.With this adapter you can mount a LS50FHa or LS60FHa at your existing astronomical telescope with 181mm to 200mm outer diameter, in order to use this telescope for solar observing in H-alpha. The adapter is plugged onto the front of your telescope, and the filter can be screwed onto the adapter.PLEASE NOTE:This article no. 0557416 gives only the price for a complete range of different adapter-plates of 181mm to 200mm diameter. The real adapter-plate will be manufactured exactly for your telescope. Therefore we need the exact outside diameter of your telescope or the dew shield!When ordering, you will find a field for comments, please note there the appropriate diameter!Then we will manufacture a adapter-plate for the diameter that you have noted. Manufacturing time will be 2 to 3 weeks.If you have any questions, you can contact us by e-mail or telephone.SCOPE OF DELIVERY1x adapter plate manufactured by your specifications(Filter not included)Delivery time 2-3 weeks

£233.00*
LUNT Adapter-Plate LS50/60FHa to 201 - 225mm Ø
Adapter plate for mounting a LUNT LS50FHa or LS60FHa front-filter at a telescope with 201mm to 225mm front outer diameter.With this adapter you can mount a LS50FHa or LS60FHa at your existing astronomical telescope with 201mm to 225mm outer diameter, in order to use this telescope for solar observing in H-alpha. The adapter is plugged onto the front of your telescope, and the filter can be screwed onto the adapter.PLEASE NOTE:This article no. 0557417 gives only the price for a complete range of different adapter-plates of 201mm to 225mm diameter. The real adapter-plate will be manufactured exactly for your telescope. Therefore we need the exact outside diameter of your telescope or the dew shield!When ordering, you will find a field for comments, please note there the appropriate diameter!Then we will manufacture a adapter-plate for the diameter that you have noted. Manufacturing time will be 2 to 3 weeks.If you have any questions, you can contact us by e-mail or telephone.SCOPE OF DELIVERY1x adapter plate manufactured by your specifications(Filter not included)Delivery time 2-3 weeks

£298.00*
LUNT Adapter-Plate LS50/60FHa to 226 - 250mm Ø
Adapter plate for mounting a LUNT LS50FHa or LS60FHa front-filter at a telescope with 226mm to 250mm front outer diameter.With this adapter you can mount a LS50FHa or LS60FHa at your existing astronomical telescope with 226mm to 250mm outer diameter, in order to use this telescope for solar observing in H-alpha. The adapter is plugged onto the front of your telescope, and the filter can be screwed onto the adapter.PLEASE NOTE:This article no. 0557418 gives only the price for a complete range of different adapter-plates of 226mm to 250mm diameter. The real adapter-plate will be manufactured exactly for your telescope. Therefore we need the exact outside diameter of your telescope or the dew shield!When ordering, you will find a field for comments, please note there the appropriate diameter!Then we will manufacture a adapter-plate for the diameter that you have noted. Manufacturing time will be 2 to 3 weeks.If you have any questions, you can contact us by e-mail or telephone.SCOPE OF DELIVERY1x adapter plate manufactured by your specifications(Filter not included)Delivery time 2-3 weeks

£354.00*

Similar products

LUNT Blue-Glass 20mm for B400 to B1800 blocking-filters
​Spare part for blocking-filters from LUNT SOLAR SYSTEMS, suitable for B400, B500, B600, B1200 and B1800 blocking-filters.The H-alpha telescopes and filter systems from Lunt Solar Systems each include a blocking-filter. The blocking-filters have a blue colored filter part on the side facing the telescope. This blue colored filter parts may become a milky white layer at older blocking-filters if the blocking-filter was storded at high air humidity for some time. Please always store H-alpha telescopes and filters as dry as possible. If this blue colored filter part has become a milky white layer, it can be replaced with this spare part. The replacement is easy and can be done by the user himself. Installation instructions can be found here under the "Manuals" tab as a PDF for download.Please note that this replacement part can only be used on Lunt Solar Systems blocking-filters B400 to B1800. If the problem happens with the large B3400 blocking-filter, the B3400 must be sent to our service department for repair.FEATURESDiameter: 20mmCannot be used separately, only as spare part at blocking-filters from Lunt Solar SystemsFor B400, B500, B600, B1200 and B1800 blocking-filtersIt does not matter if the blocking-filters are installed in 90° zenith-mirrors or straight extension-tubesSCOPE OF DELIVERYSpare part 20mm blue glass for B400 to B1800 blocking-filters

£15.00*
LUNT O-ring 34mm for Pressure-Tuner at MT & THa solar telescopes
Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMSTwo rubber O-rings are installed into the Pressure-Tuner of Lunt Solar Systems solar telescopes to seal the air-pressure tuning system. Over time, the rubber of this O-rings can age and become porous, whereby the air-pressure can then no longer be maintained. When this happens, a old O-ring can be replaced by this spare part. The replacement is simple and can be done by the user. Installation instructions can be found here under the tab "Manuals" as a PDF file for download.Please be sure to note:Depending on the production series, the diameters of the Pressure-Tuner pistons can vary slightly. There are pistons for O-rings with 32mm inner diameter and 40mm outer diameter, and pistons for O-rings with 34mm inner diameter and 42mm outer diameter. Please check the diameter of your old O-rings, this spare part is an O-ring with 34mm inner diameter and 42mm outer diameter.If you need the smaller O-ring with 32mm inner diameter and 40mm outer diameter, this is the spare part with item number 0558330.The LS50THa telescopes have Pressure-Tuners with smaller diameters, for these you will need replacement O-rings with item number 0558320.After replacing a O-ring, the piston and cylinder of the Pressure-Tuner can be re-greased with grease available under item number 0558350.FEATURESInner diameter: 34mmOuter diameter: 42mmCannot be used separately, only as a replacement part on the Pressure-Tuner of MT and THa telescopes from Lunt Solar Systems.It does not matter what blocking-filter is at the MT or THa telescope.SCOPE OF DELIVERYSpare part one O-ring with 34mm inner diameter and 42mm outer diameter for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems

£5.00*
LUNT Solar Eclipse Glasses (5 pieces)
Observe solar eclipses, sunspots, and airplane flybys in front of the sun safely with these glasses designed for direct solar observation.Manufactured to the same standards of safety typical to the entire family of Lunt Solar Systems products - the premium manufacturer of Solar telescopes and filters.FEATURESproduces a very natural light-yellow sun imageideal for safe visual observation of the sunvery resistant to damage100% safeSCOPE OF DELIVERYSolar eclipse glasses (5 pieces)

£16.90*
LUNT O-ring for Pressure-Tuner at LS50THa solar telescopes
​Spare part for Pressure-Tuner of LS50THa H-alpha solar telescopes from LUNT SOLAR SYSTEMSA rubber O-ring is installed into the Pressure-Tuner of Lunt Solar Systems LS50THa solar telescopes to seal the air-pressure tuning system. Over time, the rubber of this O-ring can age and become porous, whereby the air-pressure can then no longer be maintained. When this happens, the old O-ring can be replaced by this spare part. The replacement is simple and can be done by the user. Installation instructions can be found here under the tab "Manuals" as a PDF for download.After replacing the O-ring, the piston and cylinder of the Pressure-Tuner can be re-greased with grease available under part number 0558350.Please note that this spare part can only be used on the Lunt Solar Systems LS50THa H-alpha solar telescopes. If the problem occurs on the larger THa or MT series telescopes, the larger O-rings with part numbers 0558330 or 0558340 must be used there.FEATURESInner-diameter: 31mmOuter-diameter: 39mmCannot be used separately, only as a replacement part on the Pressure-Tuner of the LS50THa telescopes from Lunt Solar Systems.It does not matter what blocking filter is at the LS50THaSCOPE OF DELIVERYSpare part one O-ring for pressure tuner of LS50THa

£5.00*
LUNT Solar Eclipse Glasses (1 piece)
Observe solar eclipses, sunspots, and airplane flybys in front of the sun safely with these glasses designed for direct solar observation.Manufactured to the same standards of safety typical to the entire family of Lunt Solar Systems products - the premium manufacturer of Solar telescopes and filters. FEATURESproduces a very natural light-yellow sun imageideal for safe visual observation of the sun very resistant to damage 100% safe SCOPE OF DELIVERYSolar eclipse glasses (1 piece)

£5.90*
%
EXPLORE SCIENTIFIC Sun Catcher Solar Filter for 9"- 10" SC Telescopes
Explore Scientific's Sun Catcher Variable Large Aperture Solar Filters are available in many sizes to work on most telescopes from 60mm up to 10-inch Schmidt-Cassegrain and of course all Bresser and Explore Scientific Telescopes. The Solar Filter material being used is the new advanced 'Solarlite' Film manufactured by world famous Thousand Oaks Optical through years of research and development. 'Solarlite' a new solar film that has the optical quality of glass with the advantages of impregnated polymer. Perfect also for the solar astrophotographer.NOTE: All Explore Scientific Solar Equipment is rated ISO12312-2 supplied by Thousand Oaks Optical and approved for direct observation of the Sun. These solar filters are available in different sizes, the picture above shows three different sizes as an example. This is the solar filter with 203mm filter diameter.SPEZIFICATIONSSpecial objective filter for safe solar observationsISO12312-2 ratedField-stop diameter 203mmFits to outer telescope tube diameter from 200 to 280mmQuick individual match with your telescope diameterFast Setup - Easy UseSCOPE OF DELIVERY1x Sun Catcher solar filter

£30.00* £59.90* (49.92% saved)
EXPLORE SCIENTIFIC Solarix Solar Filter Film A4
​Explore Scientific Solarix Solar Filter Film.Watch Solar Eclipses, Sun Spots, Planet Transits, crossing aircrafts and satellites.Suitable for making your individual solar filter for telescopes, binoculars, photo- and video cameras.New developed solar filter film that has the optical quality of the glass with the advantages of impregnated polymer.Collateral protection by using impregnated polymer and additional filter coated surface.Creates a very natural and yellow solar image.Also qualified for high magnifications.Consistent brightness and even density with any aperture.Ideal for visual observing and photographic use.Light weight and does not require re-balancing tube assembly.Flat surface compared to other thin film filters that have wrinkles and creases.Resistant against any damage.Construction manual included for making your individual solar filter and eclipse glasses.100% safeSpecifications:Material thickness: 0.05mm Optical density:  5Optical transmission: 1/1000 of 1%  (99.999% incoming light blocked)Dimension: A4 - 210 x 297mmSCOPE OF DELIVERYSolar Filter Film, A4 sizeHard carton stencil for cutting out a telescope filter holder and eclipse glassesContruction- and Instruction manual Additional materials which need to be purchased separately:Double sided gluing tape.Universal adhessive glue.Paper scissor.

£19.90*
LUNT Grease for Pressure-Tuner at MT & THa solar telescopes
Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMSFor example, if the O-rings have been changed on a Pressure-Tuner of a Lunt Solar Systems H-alpha solar telescope, the Pressure-Tuner can be re-greased with this grease. The grease can be applied to the piston with the O-rings and to the threads of the brass cylinder on the Pressure-Tuner. It keeps the Pressure-Tuner running smoothly and seals it.Please note:Do not use too much grease inside the brass cylinder. The grease must not get into the air passage at the bottom of the brass cylinder, otherwise the Etalon could be damaged in the worst case.FEATURESLithium grease with Teflon contentVery good sealing propertiesHigh adhesion and good corrosion protectionTemperature stable from -20 to +120° CelsiusConstant viscosity during temperature fluctuationsSCOPE OF DELIVERYSpare part: Grease for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems

£2.50*
Adapter T2 to 2", for 2" eyepieces to blocking filter
Adapter T2 to 2", takes for example 2" eyepieces to Lunt Solar Systems blocking-filters.This adapter offers a T2 female thread at the telescope-side, and a 2" connection at the eyepiece-side.For example you want to use your 2" eyepieces at Lunt Solar Systems telescopes or filters? All you need is this adapter. Simply remove the 1.25" eyepiece tube from your blocking-filter, and thread on this 2" adapter. It takes T2 threading to a 2" eyepiece tube.You can use 2" eyepieces with this adapter at:• LUNT H-alpha telescopes (not at LS35THa!)• the blocking-filters of LUNT H-alpha filter systems• LUNT Ca-K modules• all telescopes/adapter with T2 male threadTechnical data:• Thread at telescope-side: T2 female thread• Eyepiece connection: 2"Delivered by order:• Adapter T2 to 2"(Blocking Filter not included)

£27.00*
EXPLORE SCIENTIFIC Sun Catcher Solar Filter for 80-102mm Telescopes
Explore Scientific's Sun Catcher Variable Large Aperture Solar Filters are available in many sizes to work on most telescopes from 60mm up to 10-inch Schmidt-Cassegrain and of course all Bresser and Explore Scientific Telescopes. The Solar Filter material being used is the new advanced 'Solarlite' Film manufactured by world famous Thousand Oaks Optical through years of research and development. 'Solarlite' a new solar film that has the optical quality of glass with the advantages of impregnated polymer. Perfect also for the solar astrophotographer.NOTE: All Explore Scientific Solar Equipment is rated ISO12312-2 supplied by Thousand Oaks Optical and approved for direct observation of the Sun. These solar filters are available in different sizes, the picture above shows three different sizes as an example. This is the solar filter with 90mm filter diameter.SPEZIFICATIONSSpecial objective filter for safe solar observationsISO12312-2 ratedField-stop diameter 90mmFits to outer telescope tube diameter from 90 to 160mmQuick individual match with your telescope diameterFast Setup - Easy UseSCOPE OF DELIVERY1x Sun Catcher solar filter

£25.90*
EXPLORE SCIENTIFIC Sun Catcher Solar Filter for 110-130mm Telescopes
Explore Scientific's Sun Catcher Variable Large Aperture Solar Filters are available in many sizes to work on most telescopes from 60mm up to 10-inch Schmidt-Cassegrain and of course all Bresser and Explore Scientific Telescopes. The Solar Filter material being used is the new advanced 'Solarlite' Film manufactured by world famous Thousand Oaks Optical through years of research and development. 'Solarlite' a new solar film that has the optical quality of glass with the advantages of impregnated polymer. Perfect also for the solar astrophotographer.NOTE: All Explore Scientific Solar Equipment is rated ISO12312-2 supplied by Thousand Oaks Optical and approved for direct observation of the Sun. These solar filters are available in different sizes, the picture above shows three different sizes as an example. This is the solar filter with 114mm filter diameter.SPEZIFICATIONSSpecial objective filter for safe solar observationsISO12312-2 ratedField-stop diameter 114mmFits to outer telescope tube diameter from 110 to 160mmQuick individual match with your telescope diameterFast Setup - Easy UseSCOPE OF DELIVERY1x Sun Catcher solar filter

£31.90*
%
LUNT Heating Module for Blocking-Filter
At very cold temperatures, blocking filters may no longer work accurately central in the H-alpha wavelength, which means that the details on the sun become less visible. With this Heating-Module you can counteract this effect and observe the sun in the H-Alpha line optimally even at cold temperatures.The Heating-Module is for use with blocking filters in 90° star-diagonal housing from Lunt Solar Systems. It cannot be used at blocking filters in straight extension tube.The Heating-Module has an internal battery which allows for about 1 to 1.5 hours of operation. The battery can be recharged with the supplied USB cable.FEATURESAllows optimal observations in the H-alpha line even at very cold temperatures with blocking filters from Lunt Solar SystemsOperating time about 1 to 1.5 hoursInternal battery can be charged via USB cableCan also be used as a portable charger to power small electronic devicesInput (IN): 5V 2AOutput (OUT): 5V 2ACapacity: 5000mAhSCOPE OF DELIVERYLSBHEATER Heating-Module for Blocking-FiltersMounting screwsHexagon wrenchUSB cableInstruction manual(Blocking-filter not included!)

£249.00* £399.00* (37.59% saved)

Customers also viewed

LUNT LS60FHa/B600d2 H-alpha solar filter
60mm H-alpha solar filter system with B600 blocking filter, for front mounting at telescopes with 2" focuser, and up to 540mm focal length.The LS60FHa H-alpha Etalon filter system with 60mm aperture (no central obstruction) for use on any refractor and many other telescopes. Because the LS60FHa has an estimated bandwidth of <0.75 Angstrom it is capable to providing high contrast views of both solar surface and edge detail (prominences).The system includes the B600 blocking filter, which is usable for telescopes up to 540mm focal length. Larger blocking filters suitable for longer focal length are also optional available. The blocking filter is installed in a 90° star diagonal for 2" focuser. This diagonal is equipped with a reception for 1.25" eyepieces and a T2 camera connection.Adding an additional available double-stack Etalon system will reduce the bandwidth to ~<0.55 Angstrom.FEATURESAperture: 60 mmNo central obstructionBandwidth: <0.75 AngstromTuning: tiltable EtalonHousing diameter: 95 mmLength: 85 mmWeight: 0.85 kgFront thread: M90x1 female threadRear thread: M90x1 male threadBlocking filter: B600 in diagonal for 2" focuserMaximum focal length of telescope: 540 mmSCOPE OF DELIVERYLS60FHa solar filterB600 Blocking Filter (for 2" focuser) in star-diagonalTransport caseInstruction manual

£3,798.00*