LUNT LS100MT/B3400FT Multipurpose APO Telescope for Sun + Night-Sky

​The LS100MT solar telescopes can be upgraded with this optional conversion kit. This allows the telescopes to be used as 3-lens ED apochromatic refractor for observation and photography of the starry night sky.The H-Alpha system of the LS100MT telescopes can be easily replaced by this conversion kit. The conversion kit offers a very high quality and solid R&P focuser. Even the heaviest cameras or other accessories will be hold without any problems and can be focused sensitively by the integrated 10:1 reduction.Simply loosen three knurled screws holding the H-Alpha unit including the focuser at the LS100MT. Attach here the new focuser, and your LS100MT is transformed into a full 3-lens apochromatic telescope. The new focuser offers 95mm focusing way with backlash- and tilt-free mechanics also when using heavy accessories. A 2 inch ring-clamp is directly at the focuser, and an adapter to 1.25 inch also with ring-clamp is included in delivery.But this is not all: With this conversion kit Herschel-wedges or Ca-K modules can be used at the LS100MT telescopes for solar observation. This makes it possible to observe the sun in H-alpha, in Calcium-K wavelength light, or in White-Light - with one and the same telescope!This conversion kit turns the LS100MT into a real all-round telescope!FEATURESBacklash- and tilt-free mechanics95mm focusing way10:1 reduction2 inch and 1.25 inch ring clampingSCOPE OF DELIVERYHigh quality 2 inch focuser with adapter to LS100MT telescopesAdapter from 2 inch to 1.25 inchInstruction manualLS100MT telescope not included! Can only be used together with a LS100MT solar telescope. This conversion kit is absolutely necessary if a LS100MT telescope should be used for night sky observation.

A very good diagonal mirror for telescopes with 2" focuser and for the BRESSER Messier telescopes with a 2.5"- HEX focuser. Enables the use of eyepieces and accessories with 2" barrel, so that a wider field of view can be reached. A larger light beam and a comfortable observation position is achieved by this 2 inch zenith mirror. Especially for use with refractors and for zenith observations a useful accessory.  The clamping ring is made of brass, so there will be no scratch marks on your high-quality eyepiece. The precise clamping is another advantage. The BRESSER 2" Diagonal Mirror is completely made of metal and has a very accurate flat mirror. The dielectrical coating delivers a 93% reflectance and is very durable against enviromental influences. FEATURES Star diagonal mirror for focuser with 2" barrel High quailty flat mirror Dielectrical mirror coating delivers a 93% reflectance Very durable against enviromental influencesEyepiece adapter 1.25/2.0 inch includedBrass eyepiece clamping ring Housing completely made of metal Dust caps included SCOPE OF DELIVERY diagonal mirroreyepice adapter 1.25/2.0 inch dust caps

Lunt Solar Systems zoom-eyepiece with variable focal length from 7.2mm to 21.5mm, with 1.25 inch (31.7mm) connection.The special of this zoom eyepiece is that the optical layout offers highest quality views of the sun, but also on nightsky objects. LUNT minimized the reflections by using superb multicoatings and with care designed internal baffle system and blackened lens edges. The LUNT zoom-eyepiece is not the widest field zoom-eyepiece on the market, LUNT prefered best performance over widest field. The sun and stars are perfect pin point across the entire field of view without any visible distortion. The LUNT zoom-eyepiece is almost parfocal, from one end to the other end of the zooming way you need only 0.5mm to refocuse. The LUNT zoom-eyepiece has a very nice height adjustable eyeguard to protect your eye against day light reflections and to help you to find the perfect eye position.Please note that these eyepieces are only accessories for existing solar telescopes or filters when observing the sun. Solar observation alone with these eyepieces without additional solar filters is not possible!FEATURESFocal length: 7.2mm - 21.5mm continuously adjustableBarrel size: 1.25 inch (31,7mm)Diameter: 47mmHeight: 82mmWeight: 170gEye relief: 15mmLenses / Groups: 7 lenses / 4 GroupsField of view: 53° at 7.2mm - 40° at 21.5mmSCOPE OF DELIVERYLUNT Zoom Eyepiece 7.2mm - 21.5mm

Keep your head covered and prevent sunburn while observing. UV protectant material with small pocket and clip to prevent being blown off in the wind. Cool ventilated design. Neck flap to keep your neck protected while looking through the eyepiece.SCOPE OF DELIVERYSolar Hat with neck flap

BRESSER EXOS-2 GoTo Equatorial Mount. Mount, tripod and hand box with computer. This German mount has tracking motors in both axes that follow celestial objects very precisely.The handbox with GoTo works reliable and controls the mount in every situation. Precise ball bearings in both axes ensures minimal backlash at all nine possible tracking speeds.The battery pack (12 V) is conveniently fastened to the tripod shelf and takes eight size "D" batteries.The mount rests on a very tough and rigid stainless steel tripod and can take optical tubes of up to 13 kg. GOTO - Stargazing at the push of a button! The Startracker GoTo System enables beginners to start astronomical observations in just a few minutes, and guides you to objects that are hard to localize through a standard finder scope.Just push the button and the GoTo System will find planets, nebulae or galaxies for you and position your telescope automatically and precise.The GoTo System database includes thousands of astronomical objects.The Messier mount with GoTo System allows you to observe without tedious searching, or image faint objects that are hard to find in a standard finder scope.The BRESSER StarTracker GoTo systems uses servo motors for both axes and features an ST-4 compatible autoguiding input. Guiding aggressivity can be set on the mount itself. The menu navigation of the Startracker Handbox is also multilingual and offers the settings of German, English, French, Spanish and Italian.CHARACTERISTICS MOUNT Stable parallactic mount with fine drive in both axes Ball bearings in both axes for more precise movements Stable height adjustable stainless steel tripod ( Min. 69cm / Max. 109,5cm ) Load capacity up to 13 kg payload Circular bubble for easy horizontal alignment GoTo Mount with motors and hand box controller, for easy finding and guiding moon, planets, stars and much more ST-4 compatible autoguider interface Pole height scale for setting the latitude Scaled graduated circular rings to facilitate finding objects using a star atlas or planetarium software Pole finder scope with optional illumination ( item no. 4964212 ) Tripod weight: 4.7 kg Mount weight: 6.7 kg (without counterweight) Total weight incl. counterweight: 15.9 kg Batteries: not included SCOPE OF DELIVERY Equatorial EXOS 2 GOTO mount with stainless steel tripod and Startracker handcontroller Adjustable polar finder scope with optional illumination Stainless steel tube field tripod with accessory tray 1 x 4.5 kg counterweight

The Twilight I is a light-to-medium-duty alt-azimuth mount with tripod designed to quickly and easily accept small to medium sized refractors, such as the AR102 + AR127s or ED102mm + ED127, and of course, the ED80mm. Lightweight, fast Newtonians will also match up nicely with the BRESSER Twilight I mount. As long as your telescope does not exceed 18 pounds and has a Vixen-Style Universal Dovetail bar for mounting the telescope to the mount head, you are good to go. The Twilight I alt-azimuth mount head is made of powder-coated aluminum and there are worm gears on both axes. The adjustable angle head can be tilted forward or back at a 45° angle to allow more clearance for your telescope so you can point it straight up for viewing at the zenith. The Allen hex wrench for doing the mount head adjustment can be safely stored at the integrated magnetic holder.  Slow-motion control cables are attached on the vertical and horizontal axes, and are easy to turn during the night, even with gloves on, due to the over-sized knurled knobs that are attached to the end of each cable. They can be attached to either side of each axis to accommodate right or left-handed users, or different types of telescopes (e.g. refractors vs. Newtonian reflectors) for ease of adjustment. The stainless steel tripod that comes standard with the Twilight I mount has adjustable legs and a wide foot print of 42 inches, which makes the tripod more stable. A spreader bar locks against the inside of the legs to secure the tripod even further, and keep vibrations to a minimum. SCOPE OF DELIVERYTwilight I Telescope MountStainless Steel Field tripod

​Field-flattener and focal length reducer for deep-sky astrophotography. Designed for the multipurpose APO telescopes of the Lunt-Solar-Systems LS80MT, LS100MT and LS130MT series.At the telescopes of the MT series from Lunt Solar Systems, the H-Alpha filter unit for solar observation can be removed, then these telescopes can be used as high quality ED APO's for observing and photographing the night sky.This accessory for the LS80MT, LS100MT and LS130MT telescopes shortens the focal length by a factor of 0.8x, providing a larger field of view for deep-sky astrophotography. This also allows shorter exposure times. At the same time, the field of view is flattened for photography.On the camera side, the reducer/field-flattener has a T2 male thread (M42x0.75). DSLR cameras can be connected here directly with a normal T2 ring.For other cameras, an M48x0.75 male thread is available in addition to the T2 male thread. The distance between reducer/field-flattener and camera sensor should be around 50 to 55mm.An M64x1 thread is provided on the telescope side. This allows to connect the reducer/field flattener to the focusers of the conversion kits for the LS80MT, LS100MT and LS130MT telescopes. Please note that for using the reducer/field flattener at the LS80MT, LS100MT or LS130MT telescopes, the corresponding conversion kit for night-time use of the telescope is absolutely necessary..FEATURESShortens focal length of F/7 ED telescopes by a factor of 0.8xFlattened field of view for photographyT2 thread and M48x0.75 thread for camera connectionWorking distance 50 to 55mmSCOPE OF DELIVERY0.8x reducer/field-flattenerAdapter to T2 thread (M42x0.75) and to M48x0.75