Skip to main content Skip to search Skip to main navigation
Please note that our minimum order value is £50

KIENZLE Jumbo NEO LCD Weather Clock white

Help & Service for your product

Here you will find quick help, answers to frequently asked questions, and direct access to support.

Service Portal

Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.

Service Portal

Sensor Form

In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.

Sensor Form

Ratgeber & Tipps

FAQ - Frequently Asked Questions

The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
  1. Remove all batteries from the base station and the outdoor sensor.
  2. Wait at least 3–10 minutes.
  3. Insert the batteries into the base station.
  4. Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.

Tips:
  • If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
  • Do not place the base station near other electronic devices (this may interfere with reception).
  • If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
  • Briefly press the reset button on the back with a pen
  • If necessary, place the station closer to a window, as reception inside buildings may be limited

Product and safety instructions


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • SUFFOCATION RISK! Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a SUFFOCATION RISK!
  • RISK OF ELECTRIC SHOCK! This device contains electronic parts powered by a power source (battery). Never leave children unsupervised when handling the device! It must only be used as described in the instructions, otherwise, there is a RISK OF ELECTRIC SHOCK!
  • FIRE/EXPLOSION RISK! Do not expose the device to high temperatures. Only use the recommended batteries. Do not short-circuit the device and batteries or throw them into fire! Excessive heat and improper handling can cause short circuits, fires, and even explosions!
  • Fire/explosion risk - Do not expose the device to high temperatures. Only use the recommended batteries. Do not short-circuit the device or batteries, and never throw them into fire. Excessive heat and improper handling can cause short circuits, fires, and even explosions.
  • Do not expose the device to strong shocks, vibrations, dust, prolonged high temperatures, or extreme humidity. This may cause malfunctions, short circuits, and damage to batteries and components.
  • Do not disassemble the device! In case of a defect, please contact your specialist dealer. They will contact the service center and may send the device in for repair if necessary.
  • Only use the recommended batteries. Always replace weak or used batteries with a completely new set of fully charged batteries. Do not use batteries of different brands, types, or varying capacities. Remove batteries from the device when it is not used for an extended period!
  • The manufacturer is not liable for any voltage damage resulting from incorrectly inserted batteries!
Skip product gallery

Compatible Sensors

%
BRESSER Thermo-Hygro Sensor 433 MHz
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.148951499314998150041513115243152981540515406154071540815409154181544415479154961565216206162077000012CM30007000012GYE00070000137000020CM30007000020GYE0007000020QT50007000023700002770000297000030700006070042007004200GYE0007004200HZI0007004200MGU0007004200QT50007004210700433070043407004350700436070043707004380700650070065107006511700720170073507007402700740370074047007511700752070076107007620907060090707009070710960410196042009604210700001200000070000200000007004200000000 Living room, bedroom and children's room, kitchen and of course the bathroom - all benefit from a regular room climate check to ensure optimal comfort. So, enhance your weather station with this BRESSER Thermo-Hygro Sensor, allowing you to monitor conditions at an additional location. The sensor sends data over a significant distance of up to 80 meters, instantly displaying it on your base station's screen. Wondering if it's really that warm? The sensor includes an LCD display for immediate, on-site verification of current readings. This feature also enables this temperature and humidity meter to function as a standalone thermo-hygrometer. FEATURES Measures temperature and humidity Easy-to-read LCD display Functions as an independent solution, or as a replacement or supplementary sensor for select BRESSER weather stations Maximum range of up to 80 meters IP Protection Class: IP44Frequency: 433 MHz Dimensions: 71 x 65 x 23 mm / weight: 44 g Powered by 2x 1.5V AAA batteries (not included) SCOPE OF DELIVERY Thermo-Hygro Sensor Instruction manual

Available

£17.02* £23.99* (29.05% saved)
Skip product gallery

Customers also bought

BRESSER Galaxia 114/900 EQ3 Reflector Telescope with Smartphone Adapter & Solar Filter
Fascinating Jupiter, breathtaking Ring Nebula and glowing Pleiades – there are infinite beauties to admire in outer space. With this complete telescope set for beginners, you can explore them with your own eyes, and do so immediately. Everything is included for a quick and easy start in sky observation: the astronomical reflector telescope with 114 mm aperture and 900 mm focal length, the equatorial mount, the tripod and a wide range of astronomical accessories. In addition, the telescope can be operated very easily, even by beginners. The Galaxia is particularly suitable for observing the Moon and planets as well as star clusters and bright gas nebulae. Getting started easily with a true astro-classic – the telescope This set enables you to make your first astronomical discoveries through a classic reflector telescope, a so-called Newtonian reflector. For many beginners, the view through telescopes of this type is rather unusual: you don't look in at the back of the telescope, but at the front and laterally. This way you can always enjoy your observations in a comfortable physical position. Even if the telescope is pointed vertically upwards into the sky, you don’t have to bend down. Another important advantage of these reflecting telescopes: the optics are absolutely free of chromatic aberrations and thus score points with their good imaging properties. Due to its aperture of 114 mm, the entry-level telescope already collects a lot of light from the celestial objects. In addition, 114 mm aperture and 900 mm focal length result in a large focal ratio (ratio of aperture to focal length) of 1 to 7.9 (F/7.9). As a result, you’ll enjoy a sharp image with good contrast. The combination of large aperture and long focal length makes especially Moon, Sun and planets look very impressive through this telescope. But you can also use it to observe many deep sky objects. Look forward, for example, to your first impressions of sparkling open star clusters and globular clusters. But also bright gas nebulae such as the Orion Nebula M42 or the Dumbbell Nebula M27 can already be seen with this telescope. However, how close do the celestial bodies appear through the astronomical telescope? The resolving power of the 114 mm aperture allows for magnifications of up to 230x with sharp images. Technically even more would be possible, theoretically up to 675x using the included accessories. But as the magnification increases, the image sharpness can then slowly decrease. And another factor always determines the answer to the question of possible magnification: the air turbulence in the atmosphere (seeing conditions). Note for nature lovers: If you choose a Newtonian telescope like the Galaxia reflector telescope, you can look forward to a specialist in astronomical observation. However, the image is always displayed laterally reversed as well as upside down, which makes no difference when observing the sky. However, this type of telescope is less suitable for nature and landscape observation during the day. Would you like to use your new telescope for exciting nature discoveries as well? Then we recommend that you choose one of the BRESSER refractor telescopes. Perfect foundation for stargazing newbies – mount and tripod You found the ideal place for your start in astronomy? Then go ahead and mount the beginner's telescope on the equatorial mount and the height-adjustable aluminium tripod. This type of mount has a special advantage over azimuthal models: the movement of the celestial bodies is tracked on just one axis instead of two. To do this, you align one axis parallel to the Earth's axis beforehand. This so-called "alignment" is easily done: you simply point the axis approximately to Polaris. Another advantage of this particular mount is that you move the axes via two flexible shafts with fine adjustment. Perfect for comfortable and sensitive adjustment and tracking of your telescope. Always at hand: The extensive accessories can be stored on the shelf between the tripod legs. Keep track of things automatically: For this telescope’s equatorial EQ-3 mount, the tracking motor with item number 4951400 is available as an optional accessory. This eliminates the need to manually track a celestial object set in the telescope. When this motor is installed at the mount, it automatically tracks the celestial object, keeping it in the field of view of the eyepiece. This makes observing the night sky even more comfortable! Everything you need for your new hobby – the accessories Since the telescope kit comes with an extensive range of accessories, you are perfectly equipped for your first steps in the fascinating world of astronomy. Simply install the LED viewfinder parallel to the tube, adjust it and look through. As you do so, you will see a red dot projected onto a small ground-glass screen inside the viewfinder. It appears to hover in front of the sky at the exact spot where the telescope is pointed. This helps you to find celestial objects and the exact telescope alignment more easily. Simply change your perspective – with the two eyepieces you can marvel at your favourite astronomical objects in different magnifications. They are easily inserted into the telescope's focuser using the sockets, which have the standard diameter of 1.25 inch (31.7 mm). Do you want an even more detailed view? Then simply triple the magnification of the eyepieces using the 3x barlow lens. Astronomical observations are well worthwhile even during the day: enjoy a safe view of sunspots and granulation on our own star with the solar filter. CAUTION: Never point the telescope at the sun without the solar filter! Take your first photos of the Moon or the Sun, and do it easily: the smartphone adapter enables you to attach your smartphone camera to the telescope and soon enjoy your very own astronomical snapshots. FEATURES Reflector telescope with 114 mm aperture and 900 mm focal length Reflector type Newton Well suited for observing Sun, Moon and planets, also star clusters and gas nebulae are visible Height-adjustable tripod with equatorial EQ3 mount Sensitive adjustment through flexible shafts and fine adjustment in both axes Easy to use, very suitable for beginners Focal ratio F/7.9, thus sharp image and good contrast 1,25 inch (31,7 mm) eyepiece focuser Two eyepieces and one barlow lens with 1.25 inch (31.7 mm) extension tubes for different magnifications Safe solar observation with the included solar filter Easy first steps into astrophotography with smartphone camera adapter SCOPE OF DELIVERY Telescope Aluminium tripod Equatorial EQ3 mount Eyepieces: 4 mm and 20 mm (1.25 inch sockets) Barlow lens 3x (1.25 inch socket) LED illuminated dot finder Solar filter Smartphone camera adapter Accessory tray Astronomy software download Instruction manual

Available

£339.00*
KIENZLE Jumbo NEO LCD Weather Clock grey
The KIENZLE Jumbo NEO LCD Weather Clock impresses with its extra-large, easy-to-read display. As a large radio-controlled wall clock with integrated weather station, it is perfect for offices, workshops or open-plan living spaces. The time and date are set automatically via the DCF signal while a time zone offset is available – reliable and precise. Double the benefit: Wall clock with powerful outdoor sensor This high-quality digital wall clock does more than just keep time. Thanks to the graphic weather forecast, barometric pressure measurement and radio-controlled sensor, you can always keep an eye on the climate. The sensor reliably records the current outdoor temperature and humidity and transmits the data with a range of up to 80 m to the large wall clock. Monitor indoor climate and store readings You can also keep track of your indoor climate using the wall clock. The large screen displays the indoor temperature and humidity. Conveniently, at the press of a button you can call up maximum and minimum values. This allows you to regulate your comfort climate efficiently and proactively based on the data. Choose precise time and weather information in XXL format – with the KIENZLE Jumbo NEO LCD Weather Wall Clock! FEATURES WALL CLOCK Radio-controlled weather wall clock with extra-large display Time and date automatically set via DCF signal, time zone offset available Weather forecast Barometric pressure Indoor temperature and humidity Displays outdoor temperature and humidity Max./Min. memory for temperature and humidity Integrated alarm with snooze function Expandable with up to 2 optional outdoor sensors (not included) Battery operated: 4x AA/LR6 (included) SENSOR FEATURES Measures temperature and humidity Clear LCD display Range: up to 80 m Battery operated: 2x AAA/LR03 (included) SCOPE OF DELIVERY Digital wall clock Outdoor sensor 4x AA/LR6 batteries 2x AAA/LR03 batteries Instruction manual

Available

£69.00*
BRESSER ClimaTemp Thermo-Hygrometer
You'll warm to the BRESSER ClimaTemp Thermo-Hygrormeter immediately. Compact and unobtrusive, this clever little device reliably keeps tabs on the temperature and humidity around you – so you always know at a glance whether your indoor climate is where it should be. Keep an eye on your indoor climate with a smile Wondering about the air quality in your home? The clear display gives you an instant read on the current comfort level: a happy smiley means temperature and humidity are spot on. A neutral expression tells you things are still perfectly fine. And if an unhappy smiley appears, it's time to do something about it. Small and easy to mount – the temperature and humidity meter Getting it up and running couldn't be simpler. The built-in magnet means that the digital hygrometer and thermometer snaps straight onto the fridge, a magnetic board, or anything similar in no time at all. Prefer to keep it on a sideboard, chest of drawers, or your desk? No problem. You can even hang it on the wall with a nail. Either way, its compact dimensions mean it'll never get in the way. Order your BRESSER ClimaTemp Thermo-Hygrormeter today and enjoy the perfect indoor climate at home, in the office, and beyond. FEATURES Thermometer and humidity meter in one device Temperature display in °C Humidity in % Smiley as indoor climate comfort indicator Suitable for mould prevention Magnet on the back panel Batteries required: CR2032, 3V (included) SCOPE OF DELIVERY 1x Thermo-Hygrometer 1x CR2032 battery Instruction manual

Available

£6.99*