HF2-BT126SS-A Complete binocular telescope set

The BRESSER Slider Binocular Mount, with its revolutionary design, offers unprecedented comfort for binocular observation - during the day and at night Thanks to the variable extension length of the two support rails (crossbars), the cardanic mount head and various adjustable slip couplings almost all binocular positions can be selected easily. Afterwards, the binoculars remain in their respective position thanks to the counterweights. During observation, it is usually not necessary to touch the binoculars. Whether you want to observe standing up, sitting on a swivel chair or lying down on a mat or bed, everything is possible. For wheelchair users the mount is also an interesting alternative to normal tripod solutions, where usually one tripod leg is always in the way. A steady image despite large binoculars and high magnification Especially when observing for a long time, even medium-weight binoculars weighing 500 grams or more and moderate magnifications of 10x or more make life difficult. Already after a short while the pictures blur and the arms get tired. Certainly, a high photo tripod can bring a significant improvement. But this solution is very limited in terms of the binoculars’ movability and the position of the observer. The BRESSER Slider Binocular Mount offers far more possibilities. Almost all desired binocular positions can be reached effortlessly. The patented design, with 2 counter-moving support rails (crossbars), is guided on special linear roller bearings inside the mount head with zero play. This allows the observer to vary the extension length as desired with little muscle power. The sliding resistance can be infinitely adjusted using 2 adjusting screws. In the middle of the slider mount’s centre of gravity, there is an axle with adjustable slipping clutch for the tilting and rotating movement. All bearings operate with absolute precision and backlash-free. For quick levelling, there is even a 30 mm fluorescent circular bubble in the base of the mount, which is easy to read even in the dark. Cardanic mount head The cardanic mount head works like a ball head. However, it offers a significantly higher load-capacity and more stability. Here, too, the sliding resistance of all moving parts can be adjusted to the user’s specific needs. The mount head offers several mounting holes for mounting a binocular holder via 1/4-inch photo screw or a standard GP prism clamp for mounting small telescopes. In addition, there are various holes on the side cheeks of the mount head for further accessories such as red light reading lamps, smartphone holders for the use of sky apps or LED viewfinders for quick sighting of celestial objects. Counterweights Several counterweights enable the exact balancing of the binoculars or telescope. Two counterweights of each 2.5 kg, 1.25 kg and 0.5 kg are included in the package and can be attached to the rear end of the mount on the mounting bolts on both sides. With the 2 included spring clamps the weights are secured on the bolts. Instead of the counterweights, a filled sandbag can also be attached to the existing mounting hook. This reduces the transport weight for planned excursions. Suitable for use with binoculars of up to 3.5 kg weightThe BRESSER Slider Mount can be used with binoculars of up to 3.5 kg weight. But it is also a real help for obtaining blur-free images with much smaller binoculars during long-term observations. It is mounted with an optionally available binocular tripod adapter, which is attached to the mount head with a 1/4-inch photo thread screw. Also highly recommended for compact refractor telescopesInstall an optionally available standard GP prism adapter on the mount head and use your travel telescope in a completely different way: as a high-quality spotting scope for landscape and sky observation. Tripod adapter The matching tripod adapter for using the optionally available BRESSER stainless steel Tripod ST-3 (item no.: 0114310) is already included in the slider mount’s scope of delivery. It converts the standard large 3/8-inch photo tripod thread (internal thread) in the base of the slider mount into a metric M10 thread. This means that after removing the adapter, a stable standard photo or video tripod with 3/8-inch mounting screw can also be used.GETTING STARTED VIDEO:  https://www.youtube.com/watch?v=AhJm3Cl1e9IFEATURESBRESSER Slider Binocular Mount without Tripod Enables comfortable and fatigue-free binocular observation Suitable for landscape and sky observation Shake-free and steady images at day and night Almost infinitely rotatable and swivelling cardanic mount head Supports binoculars and telescopes up to 3.5 kg weight Various observer positions are possible: standing, sitting and lying down Also a practical alternative to a photo tripod for wheelchair users Adjustable viewing height from approx. 30 cm to 170 cm (when using the BRESSER tripod, item no. 0114310)Dimensions when fully assembled: 125 x 35 x 180 cm (when using the BRESSER tripod, item no. 0114310)Total weight mount head incl. accessories: 14.5 kgWeight of mount head: 6 kg  Large 30 mm fluorescent circular bubble in the mounting base Mounting holes for further optional accessories available Several balance weights include: 2x 2.5 kg, 2x 1.25 kg, 2x 0.5 kg Adjustable friction clutches on all movable axes All surfaces high quality painted, powder coated or anodised Precise small series production - manufactured in the EU (Hungary)SCOPE OF DELIVERYSlider mount (binoculars + tripod not included)Tripod adapter 3/8 inch to M10 thread Balance weight 2.5 kg (2 pieces) Balance weight 1.25 kg (2 pieces) Balance weight 0.5 kg (2 pieces) Locking device for counterweights (2 pieces)

NEW - now including a high-quality aperture Solar-filter for safe observation of sunspots, eclipses and planet transits. Great telescope for night and solar observation.The combination of large aperture and short focal length predestine the MESSIER AR-152S for the observation of large celestial objects. Experience the famous globular cluster M 13 in the constellation Hercules: Thousands of pinpoint stars stand before a black sky like so many diamonds spilled onto black velvet. Equipped with nebular filters you can watch the Gulf of Mexico in the North America Nebula and all the other celestial objects that Charles Messier listed in 1781. The compact size of the MESSIER AR-152S combines outstanding tranportability, high light gathering power and low weight for a telescope of this aperture. CHARACTERISTICS OPTICSOptical design: refractor telescopeLens diameter: 152 mm / focal length: 760 mm / F/5Maximum recommended magnification: 304xTelescope for night and solar observationHigh-quality BRESSER refractor opticsUniversal telescope for planets, double stars, planetary nebulae and deep-skyHigh-end Hexafoc-focuser with 2,5" free inner diameter6x30 straight through viewfinder with reticle; optimized finder socket for comfortable use31.7 mm (1.25") diagonal mirrorCradle rings with handle and integrated piggyback camera holder (1/4 thread)Smartphone camera adapter for sky navigation includedUniversal 44 mm Dovetail plate with stainless steel rail (fits LXD75/Great Polaris/EQ5)50,8mm (2") to 31,7mm (1,25") adapter with integrated T2 thread (T2-adapter ring for your camera is needed)Collimatable lens cell CHARACTERISTICS MOUNT Stable parallactic mount with fine drive in both axes Ball bearings in both axes for more precise movements Stable height adjustable stainless steel tripod (min. 69 cm / max. 109,5 cm ) Load capacity up to 13 kg payload Retrofittable with the BRESSER Star Tracker Goto Kit (item no. 4951750) Circular bubble for easy horizontal alignment Pole height scale for setting the latitude Scaled graduated circular rings to facilitate finding objects using a star atlas or planetarium software Pole finder scope with optional illumination ( item no. 4964212 ) Tripod weight: 4.7 kg Mount weight: 5.6 kg (without counterweight) Total weight incl. counterweight: 19.3 kg Batteries: not included SCOPE OF DELIVERY: 152 mm achromatic optical tube assemblyAperture solar-filterUniversal 44 mm Dovetail plate with stainless steel rail (fits LXD75/Great Polaris/EQ5)2 pcs 2,5" extension tubes26 mm Super Plössl eyepiece 31,7 mm(1.25")31,7 mm (1.25") Zenith mirrorIntegrated 31,7 mm and T2 adapterTube ringsAdjustable polar finder scope with optional illuminationHandle and camera holderSmartphone adapter for celestial navigation8x50 optical finderAstronomy software StellariumRotatable star mapBRESSER EXOS-2 mount 2 x 4.5 kg counterweight Stainless steel tube field tripod with accessory tray

The BRESSER endoscope camera gives you a helping hand in places where your eyes would otherwise not be able to see. Pipes, drains, car engines, narrow shafts - the inspection camera features a 1 metre long gooseneck, which allows you to inspect components and hard-to-reach areas without removing individual parts. The colour 8.89 cm (3.5'') LC display shows you the target area with a 320 x 240 pixel resolution and 4x magnification. The camera features 6 LED lights with adjustable brightness, high luminance and low power consumption. The endoscope camera is also waterproof (IP 65) to ensure that splashes of water don't get into the device when you're checking a drain or heating pipe.Taking pictures and videos with the endoscope camera Whether you use the inspection camera for automotive repairs and maintenance, plumbing, construction or restoration work, it can be useful to document or evaluate your progress on a computer. With this device, you can take photos at resolutions of up to 3 MP, as well as 1280x720 videos with audio. Photos and videos are saved on a memory card (not included), which can be inserted in the SD/TF card slot. The endoscope camera can also be connected to your computer in no time via the USB cable. However, the endoscope camera is not just ideal for testing applications. Thanks to the 360° image rotation function, it is also suitable for use in science lessons or during outdoor activities. What's more, thanks to the separate switch, the bright LEDs can also be used as a torch. Examine inaccessible areas with ease with the BRESSER endoscope camera! FEATURES 8.89 cm (3.5'') LC display Approx. 100 cm long, flexible gooseneck (8.5 mm probe Ø) 6 LED lamps with adjustable brightness LEDs can also be used as a torch thanks to separate switch 4x image magnification Image format: JPEG, video format: AVI Screen resolution: 320x240 pixels VGA viewing angle: 60° Depth of field: 80 mm to ∞ Photo resolution: 2 MP, 3 MP, 640x480 pixels (selectable) Video resolution: 320x240, 640x480, 1280x720 pixels (selectable) Videos with audio 360° image rotation High light output High luminance and low power consumption Synchronous storage of data Waterproof (IP65) AV output for connecting an external display device USB interface for connection to a computer Separate control connection for connecting a remote control SD/TF memory card slot (up to 32GB SDHC, memory card not included) Power supply: 4x AA alkaline batteries Battery life: approx. 4-5 hours Menu in 7 languages DELIVERY CONTENT Endoscope camera 8.89 cm (3.5'') LC display 1 metre gooseneck with a diameter of 8.5 mm USB cable A/V cable 4x AA batteries Instruction manual

The BRESSER Slider Binocular Mount, with its revolutionary design, offers unprecedented comfort for binocular observation - during the day and at night Thanks to the variable extension length of the two support rails (crossbars), the cardanic mount head and various adjustable slip couplings almost all binocular positions can be selected easily. Afterwards, the binoculars remain in their respective position thanks to the counterweights. During observation, it is usually not necessary to touch the binoculars. Whether you want to observe standing up, sitting on a swivel chair or lying down on a mat or bed, everything is possible. For wheelchair users the mount is also an interesting alternative to normal tripod solutions, where usually one tripod leg is always in the way. A steady image despite large binoculars and high magnification Especially when observing for a long time, even medium-weight binoculars weighing 500 grams or more and moderate magnifications of 10x or more make life difficult. Already after a short while the pictures blur and the arms get tired. Certainly, a high photo tripod can bring a significant improvement. But this solution is very limited in terms of the binoculars’ movability and the position of the observer. The BRESSER Slider Binocular Mount offers far more possibilities. Almost all desired binocular positions can be reached effortlessly. The patented design, with 2 counter-moving support rails (crossbars), is guided on special linear roller bearings inside the mount head with zero play. This allows the observer to vary the extension length as desired with little muscle power. The sliding resistance can be infinitely adjusted using 2 adjusting screws. In the middle of the slider mount’s centre of gravity, there is an axle with adjustable slipping clutch for the tilting and rotating movement. All bearings operate with absolute precision and backlash-free. For quick levelling, there is even a 30 mm fluorescent circular bubble in the base of the mount, which is easy to read even in the dark. Cardanic mount head The cardanic mount head works like a ball head. However, it offers a significantly higher load-capacity and more stability. Here, too, the sliding resistance of all moving parts can be adjusted to the user’s specific needs. The mount head offers several mounting holes for mounting a binocular holder via 1/4-inch photo screw or a standard GP prism clamp for mounting small telescopes. In addition, there are various holes on the side cheeks of the mount head for further accessories such as red light reading lamps, smartphone holders for the use of sky apps or LED viewfinders for quick sighting of celestial objects. Counterweights Several counterweights enable the exact balancing of the binoculars or telescope. Two counterweights of each 2.5 kg, 1.25 kg and 0.5 kg are included in the package and can be attached to the rear end of the mount on the mounting bolts on both sides. With the 2 included spring clamps the weights are secured on the bolts. Instead of the counterweights, a filled sandbag can also be attached to the existing mounting hook. This reduces the transport weight for planned excursions. Suitable for use with binoculars of up to 3.5 kg weightThe BRESSER Slider Mount can be used with binoculars of up to 3.5 kg weight. But it is also a real help for obtaining blur-free images with much smaller binoculars during long-term observations. It is mounted with an optionally available binocular tripod adapter, which is attached to the mount head with a 1/4-inch photo thread screw. Also highly recommended for compact refractor telescopesInstall an optionally available standard GP prism adapter on the mount head and use your travel telescope in a completely different way: as a high-quality spotting scope for landscape and sky observation. Tripod adapter The matching tripod adapter for using the BRESSER stainless steel Tripod ST-3 is already included in the slider mount’s scope of delivery. It converts the standard large 3/8-inch photo tripod thread (internal thread) in the base of the slider mount into a metric M10 thread. This means that after removing the adapter, a stable standard photo or video tripod with 3/8-inch mounting screw can also be used.  The BRESSER Field Tripod ST-3 made of stainless steel The solid and height-adjustable tripod with double tripod leg clamp is made of corrosion-resistant stainless steel and perfect for direct use with the BRESSER Slider Binocular Mount. Adjust the extendable stainless steel tripod to the desired base height and thereby pre-select your favourite observation position. For example, for landscape observation while standing or sitting, the full tripod height should be used. For night sky observation, a lower setting is recommended for a comfortable viewing position while sitting or lying down. The tripod is equipped with a standard GP mounting head and a central screw with metric M10 threaded shaft.  GETTING STARTED VIDEO:  https://www.youtube.com/watch?v=AhJm3Cl1e9IFEATURESBRESSER Slider Binocular Mount with stainless steel tripod Enables comfortable and fatigue-free binocular observation Use for landscape and sky observation Shake-free and steady images at day and night Almost infinitely rotatable and swivelling cardanic mount head Supports binoculars and telescopes of up to 3.5 kg weight Various observer positions are possible: standing, sitting and lying down Also a practical alternative to a photo tripod for wheelchair users Adjustable viewing height from approx. 30 cm to 170 cmDimensions when fully assembled: 125 x 35 x 180 cmTotal weight incl. accessories: 20 kgWeight of mount head: 6 kg; weight of tripod: 5.5 kgLarge 30 mm fluorescent circular bubble in the mounting base Mounting holes for further optional accessories available Several balance weights include: 2x 2.5 kg, 2x 1.25 kg, 2x 0.5 kg Adjustable friction clutches on all movable axes All surfaces high quality painted, powder coated or anodised Precise small series production - manufactured in the EU (Hungary)SCOPE OF DELIVERYSlider mount (binoculars not included)Stainless steel tripod Tripod adapter 3/8 inch to M10 thread Balance weight 2.5 kg (2 pieces) Balance weight 1.25 kg (2 pieces) Balance weight 0.5 kg (2 pieces) Locking device for counterweights (2 pieces)

Experience a whole new view without vibrations and shaking from the free hand. The ATERA H12x30 with 422 grams is one of the lightest binoculars with image stabilizer. Due to the strong vibration canceller effect, an extremely stable field of view is achieved even from the free hand. At higher magnification you can observe everything in detail, such as reading signs and lettering, recognize the structure of bird feathers, and the ATERA is also a great companion for astronomical observations of stars. Fewer vibrations in the field of view increase the visibility of object details and the comfort of observation. The vibration of your hands often makes it difficult to see sharp objects, especially at high magnification. ATERA H12x30 features a vibration suppression mechanism with a 2-axis gimbal-mounted image stabilization mechanism. With a strong correction effect of the vibration correction angle of approx. 3 degrees(up, down, left and right), a stable field of view can be achieved even at a high magnification of 12x. Since the micro-vibrations are also eliminated, even the finest details can be seen. Two standard AAA micro batteries are used for the power supply. As they are easy to get everywhere, safe operation is guaranteed even in remote areas. Thanks to a long operating time of up to 12 hours, you can concentrate on observation without having to worry about battery consumption. An automatic power-off function, which cuts off the power after 5 minutes, prevents unnecessary battery discharge. By applying a complete multi-coating and an anti-reflection coating on all lens surfaces, the additional phase coating on the prisms, the light transmission and thus brightness of the image is drastically increased. All these features ensure low stray light and light loss and produce a particularly clear and high-contrast image. A gently rounded shape that adapts to the hands, a focus ring that can be gently rotated by lightly touching it with just one finger, a simple design, a battery compartment that is away from the operating area, all designed for ease of use. The integrated battery cover effectively protects against loss. The ATERA is delivered with a comfortable carrying strap and a protective bag for transport. FEATURES Binoculars with gimbal electronic image stabilization Observation without vibrations from the free hand Vibration correction angle of approx. 3 degrees Due to the low weight, operation with one hand is possible. Up to 12 hours of operation with one set (2pcs) of AAA micro batteries Perfect image quality due to three coating layers on the optics Phase coating on prisms Ergonomically designed for excellent usability Fashionable but simple design Carrying strap and mini bag included SCOPE OF DELIVERY Binoculars Carrying strap Storage bag Dust protection caps for eyepieces (2 pieces)

Large binoculars with 70 mm ED glass objective lensesObserve the beauty of the starry sky at night and distant objects in nature during the day. By customer request, we have succeeded in producing a new edition of these legendary binoculars. The ED glass lenses guarantee enormously high sharpness, contrast and colour purity even during the day. Globular clusters, luminous gas nebulae, the moon with its craters and even planets can be observed wonderfully on a clear night. But also all other distant things in nature and landscape, even ships, aircrafts and animals can be seen in detail at long distances. With the binoculars of the Vixen BT series, you can bring everything up close. The large, fast ED lenses in combination with the ultra modern magnesium fluorite coatings on all lens surfaces enable maximum light transmission. Thus, these binoculars produce bright, sharp and high-contrast images even at night and dusk, allowing for a particularly aesthetic viewing pleasure.Comfortable travel binoculars can also be used with photo tripodsThe comfortable 45-degree viewer enables comfortable viewing even when the binoculars are tilted towards the zenith. The BT-ED70S-A large binoculars are 4 kg light and particularly portable. An attached metal carrying handle ensures easy transport and a secure grip during tripod mounting. The binoculars have a standard Vixen dovetail rail as well as a standard 1/4 and 3/8 inch photo tripod thread. They can therefore be used on almost all common photo tripods and telescope mounts.The ideal binocular mountHowever, we recommend the Vixen HF2 fork mount for mounting. Thanks to its sophisticated design and precision mechanics, it offers perfect viewing comfort and practically zero vibrations. Especially for astronomical observations, a solid mount with tripod is one of the most important accessories. This guarantees observation without shaking and allows you to see even the finest details.Interchangeable 1.25-inch eyepiecesStay flexible and use your favourite eyepieces and ideal magnification. The BT-ED70S-A has standardised 1.25-inch eyepiece holders, allowing you to change eyepieces at any time.Which eyepieces can be used?All eyepieces with a 1.25'' barrel. Eyepieces with focal lengths of 8 to 26 mm are particularly recommended. The magnification can thus be varied from approx. 15x to 50x (focal length of binoculars : focal length of eyepiece = magnification). The eyepieces are held in the binoculars by a precise brass ring clamp and guarantee a tilt-free position. Depending on the interpupillary distance, the outer diameter of the eyepiece housing should not exceed a value of approx. 50 mm. Of course, two identical eyepieces of the same series should always be used.Use of colour and nebula filters for astronomical observationsIncrease the contrast and visibility of objects and details by screwing the appropriate filters directly into the thread of the eyepiece sleeves. Of course, colour and nebula filters must always be used in pairs. All EXPLORE SCIENTIFIC screw-in filters with 1.25''/31.7 mm diameter are suitable (see Art. No. 03102xx).Comfortable 45-degree viewer and single focusingThe 45-degree viewer enables a relaxed observation position even when the binoculars are heavily tilted. The individual interpupillary distance can also be adjusted within a range of 58 to 102 mm. The fine helical focusing system makes precise focusing simple and effortless.Retractable dewcapsThe integrated dew caps can be pulled out in high humidity and cold conditions. This prevents fogging of the outer objective lenses and effectively shields from additional stray light coming in from the side.FEATURESObjective lenses: 70 mm / ED apochromaticFull multi-coating on all lens surfacesFocal length 400 mm (F = 5.7)Resolving power: 1.66 arcsecondsLimiting magnitude: Mag 11.0Dimensions: 400 × 190 × 155 mmWeight: 4 kgAdjustable interpupillary distance: 58-102 mmIntegrated and retractable dew capsViewfinder shoe: Vixen StandardEyepiece mount: 1.25 inch / 31.7 mm barrel diameterSingle eyepiece focusingTripod mount: GP dovetail rail, 1/4 and 3/8 inch photo tripod threads.SCOPE OF DELIVERYBT-ED70S-A Large Binoculars (without eyepieces)Vixen finder shoeIntegrated dew capsDust coverCarrying handle

Thanks to fully multi coated Bak-4 glass material and the extra large objective lens diameter the BRESSER Spezial-Astro 20x80 Porro Binoculars provide bright, crisp images from edge to edge. Their high 20x magnification makes these excellent binoculars convenient not only for observing astronomical objects, but are also practical for viewing distant terrestrial targets and nature study. Their optical design and coatings minimise stray light and ghosting (even near brighter objects like the Moon), which would otherwise disrupt and detract from observing enjoyment.Diopter compensation and foldable rubber eyecups give wearers of glasses the possibility of making the best use of these binocular's wide field of view. With the tripod thread integrated in the strong central support column, which is adjustable along the centre axis bar, the BRESSER Spezial-Astro 20x80 Porro Binoculars can directly be mounted onto any suitable camera-style tripod and balanced front to back, once in place.FEATURESBinoculars for astronomical and long distance observationsExtremely high light gathering capacityCan directly be mounted onto tripods with standard 1/4" attachmentsWHAT'S INCLUDEDBinocularsCarry case