EXPLORE SCIENTIFIC Zero X Field Flattener 2''/M48 for ED80, ED102 and ED127 APO

Product Highlights

Field flattener for Explore Scientific ED80, ED102 and ED127 APOCHROMATS, correcting field curvature for up to full-frame camera sensors

  • Flattener for Explore Scientific ED80, ED102 and ED127 APO telescopes
  • Removes field curvature from telescopes
  • Produces round stars even at the edge of the image field
  • Correction for up to full-frame camera sensors (24x36 mm)
  • Camera side with large M48 threaded connector
  • Image field flattener without reduction factor
  • Working distance of 55 mm between flattener and camera sensor
  • For telescopes with a focal length of approx. 480 to 952 mm and focal ratios of F=6.0 and F=7.5
  • Fully multi-coating on all lens surfaces
  • Housing made of lightweight aluminium, black anodised

£129.00*

% £179.00* (27.93% saved)

Available

Product number: 0510380
GTIN/EAN: 4007922064147

With BRESSER, you can enjoy a smooth introduction to the vast world of astronomy. Our detailed information ("Telescope Guide") provides valuable tips for beginners— but even experienced astronomers can use the information we provide (e.g., tables for the geographical latitude of all major world cities) as a reference.

Here is the table of contents of the comprehensive BRESSER Telescope Guide:

With BRESSER, you can enjoy a smooth introduction to the vast world of astronomy. Our detailed information ("Telescope Guide") provides valuable tips for beginners—but even experienced astronomers can use the information we provide (e.g., tables for the geographical latitude of all major world cities) as a reference.

Here is the table of contents of the comprehensive BRESSER Telescope Guide:

Product information "EXPLORE SCIENTIFIC Zero X Field Flattener 2''/M48 for ED80, ED102 and ED127 APO"
Field flattener without reduction factor for Explore Scientific ED80 , ED102 and ED127 APO Refractors
The imaging plane of many telescopes is not flat but curved. This means that only the area in the centre is perfectly focused - the edge becomes blurred. The human eye can usually compensate for this image property, but a camera shows increasing blurriness towards the edge of the image field. The Explore Scientific Zero X field flattener eliminates the field curvature in many telescopes with a focal length of approx. 480 to 952 mm. The Zero X field flattener was calculated and developed for Explore Scientific ED80, ED102 and ED127 apochromats with focal ratios of F=6.0 and F=7.5. The image sharpness at the edge is dramatically increased. The stars appear round and no longer distorted - a clear benefit for the whole image aesthetics. The Zero X image flattener can be used not only with Explore Scientific Apos, but also with many other Apos. This flattener does not change the focal length of the telescope.

Correction for up to full-frame camera sensors (24x36mm)
The Explore Scientific Zero X image flattener has been developed due to the rapid development of ever larger camera sensors. With it, there is finally a field flattener available that illuminates and corrects the field of view for full-frame camera sensors up to 24x36 mm.

How to use the Zero X field flattener with M48 thread connection
This field flattener has a 2 inch (50.8 mm) plug-in connection on the telescope side, with which it is inserted into the telescope instead of an eyepiece or star diagonal mirror. On the camera side, there is a standardised M48 x 0.75 mm connection thread. This M48 connection thread offers a larger free inner diameter than the usual T2 (M42) thread and prevents vignetting when using large camera sensors. With an optionally available and camera-specific adapter ring, a DSLR camera can be connected to it. The working distance is already set at 55 mm. Of course, mirrorless cameras or special astro cameras can also be used with the M48 thread connection. For this, the appropriate M48 spacer sleeves or adapters are additionally required to set the right working distance of 55 mm. This must always be done with every corrector or field flattener so that the best possible field flattening is achieved.

Filter thread on telescope side available
The telescope-side 2.0 inch plug-in sleeve has an M48x0.75 filter thread (internal thread). Individual 2.0 inch colour or nebula filters can be inserted here to increase the contrast of the images.


FEATURES
  • Field flattener for Explore Scientific ED80, ED102 and ED127 APO telescopes
  • Removes field curvature from telescopes
  • Produces round stars even at the edge of the image field
  • Image sharpness at the edge is drastically increased
  • A clear benefit for the whole image aesthetics
  • Correction of field curvature for up to full-frame camera sensors (24x36 mm)
  • Image field flattener without reduction factor
  • On the telescope side with 2 inch (50.8 mm) plug-in connection and M48x0.75mm filter thread
  • Camera side with large M48 threaded connector
  • Working distance of 55 mm between field flattener and camera sensor
  • For telescopes with a focal length of approx. 480 to 952 mm
  • Optimised for telescopes with focal ratios from F=6.0 to F=7.5
  • Can also be used for various other APOs
  • Fully multi-coating on all lens surfaces
  • Housing made of lightweight aluminium, black anodised
  • Aluminium dust cap for M48 thread


SCOPE OF DELIVERY

  • Zero X field flattener (1 piece)
  • Dust caps


Colour: black
Material: Aluminium

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Accessories

EXPLORE SCIENTIFIC Camera-Ring M48x0.75 for Canon EOS
Camera specific bayonet adapter (camera ring) for Canon EOS DSLR with M48x0.75 mm internal thread for astrophotography. By using the large thread M48x0.75 mm, the vignetting of e.g. a DSLR full format sensor is effectively avoided. Compared to the small T2 thread M42x0.75, this adapter has a free inner diameter of 47.5 mm. This camera ring is made of matt black anodised aluminium and weighs only 40 grams. The light path (overall length) is 10.0 mm. FEATURES Camera-specific bayonet adapter Canon EOS Large female thread M48x0.75 mm Free inner diameter of 47,5mm No vignetting for full format sensors Light path (overall length) is 10.0 mm Made of matt black anodized aluminium Weight only 40 grams SCOPE OF DELIVERY Camera ring for Canon EOS (1 piece)

£23.00*
EXPLORE SCIENTIFIC Camera-Ring M48x0.75 for Nikon
Camera specific bayonet adapter (camera ring) for Nikon DSLR with M48x0.75 mm internal thread for astrophotography. By using the large thread M48x0.75 mm, the vignetting of e.g. a DSLR full format sensor is effectively avoided. Compared to the small T2 thread M42x0.75, this adapter has a free inner diameter of 41.2 mm. This camera ring is made of matt black anodised aluminium and weighs only 30 grams. The light path (overall length) is 8.0 mm. FEATURES Camera-specific bayonet adapter NikonLarge female thread M48x0.75 mm Free inner diameter of 41,2mm No vignetting for full format sensors Light path (overall length) is 8.0 mm Made of matt black anodized aluminium Weight only 30 grams SCOPE OF DELIVERY Camera ring for Nikon (1 piece)

£23.00*
EXPLORE SCIENTIFIC Extension Ring Set M48x0.75 - 5 pieces (30, 20, 15, 10 and 5 mm)
Five extension tubes from 30 to 5mm length with thread connection M48x0,75mm in a set. For adjusting different distances of the camera to the focal plane of the telescope or the corrector/field flattener. There is an M48.0,75 internal and external thread in each individual tube. The M48x0.75 thread is also called large T2 photo thread or 2.0 inch filter thread. Camera specific bayonet adapters or color and nebula filters can be used. Included are 5 different tubes with the steps 30, 20, 15, 10 and 5 mm. The larger free inner diameter of 45.0 mm effectively prevents undesired vignetting of the camera sensor. The outer diameter of the sleeves is exactly 50.65 mm and can therefore be mounted directly in any 2 inch diameter eyepiece adapter. FEATURES Extension sleeves M48x0,75 in set Five extension sleeves: 30, 20, 15, 10, 5 mm Use with correctors and field flatteners Distance adjustment from camera to focal plane Suitable for camera-specific bayonet adapters Also suitable for 2.0 inch colour and nebular filters Internal and external thread M48x0.75 mm (large T2 thread) Large inner diameter of 45.0 mm Outer diameter is 50.65 mm (2 inches) Black matt anodized aluminium Total weight 85 grams SCOPE OF DELIVERY Extension sleeves M48x0.75 (5 pieces)

£51.00*
EXPLORE SCIENTIFIC T2 Reduction Adapter M48x0.75 to M42x0.75
For connecting T2 camera accessories with the smaller M42x0.75 thread to the larger M48x0.75 thread. Also ideal for adapting 2 inch colour and nebula filters between camera and telescope. FEATURES Connection of accessories with different T2 thread sizes Adaptation of 2 inch color and nebula filters between camera and telescope Internal thread M48x0.75 mm (large T2 thread) External thread M42x0.75 mm (small T2 thread) Free inner diameter of 39.0 mm Outer diameter is 50.65 mm (2 inches) Black matt anodized aluminium Weight is only 10 grams SCOPE OF DELIVERY Reduction adapter (1 piece)

£23.00*
EXPLORE SCIENTIFIC OPTOLONG 2" L-Pro Deep-Sky Light Pollution Filter
LPS filter L-Pro for deep sky nebula constellation photography. The relentless spread or urbanization and its associated light pollution have become a growing problem for all amateur astro photographers. The current solutions to the problem can be expensive and might include the purchase of a monochrome camera, several types of narrowband filters and a filter wheel. Especially with inexpensive newtonian telescopes, double-lens ED refractors or even achromats, the L-Pro filters open up completely new possibilities for the capture of high-class astronomical images even out of the light polluted city. CMOS cameras can deliver images like monochrome cameras. This new generation of filters makes it possible to take amazing astrophotos directly from the light-polluted city with all its artificial light sources.L-Pro is a multi-bandpass filter which offers better color balance by maximizing the transmission band. The balanced transmission allows astrophotos to be taken with minimal color cast to broadband emission objects such as galaxies, reflection nebulae and globular star clusters. L-Pro is the best choice for light pollution suppression. L-Pro description L-Pro (L-Professional) filter is designed to improve the visibility of various deepsky objects. By selectively reducing the transmission of wavelengths of light pollutants, specifically those produced by artificial lightings including mercury vapor lamps, both high & low pressure sodium vapor lights and the unwanted natural light caused by neutral oxygen emission in our atmosphere (i.e. skyglow). Together with the highly transparent in main nebula emission lines at OIII (496nm and 500nm), H-beta (486nm), NII (654nm and 658nm), H-alpha (656nm) as well as SII (672nm), the filter is suitable for enhancing the contrast and details for both visual and photograghic purpose at sub-rural areas with heavy light pollution. L-Pro is a multi-bandpass filter which offers better color balance by maximizing the transmission band. The balanced transmission allows astrophotos to be taken with minimal color cast to broadband emission objects such as galaxies, reflection nebulae and globular star clusters. L-Pro is the best choice for light pollution suppression. Main use and performance Suitable for visual observation and astrophotography. L-Pro filter has a very low transmission reduction rate against continuous spectrum space objects, and thus is quite effective in suppressing light pollution sources when shooting galaxies, reflection nebulae and globular star clusters. The same holds true for visual star observations. L-Pro filter alone can suppress infrared wavelength, and thus can be used at ease for ''L'' image shootings with CCDs. Light pollution filters do not eliminate the effects of light pollution or increase the object’s brightness. In many cases, they increase the contrast between nebula and night sky, not brightening the nebula. WARNING: These nebula filters are not designed for sun observation. DO NOT LOOK AT THE SUN WITH THIS FILTER. You will go BLIND if you ignore this warning.Coating technology L-Pro has a multiple anti-reflective coating on the optical substrate. The L-Pro filter uses a precision coating based on ion deposition coating technology. This ensures durability and scratch resistance as well as stability on the CWL (central wavelength), which is not affected by temperature changes. Absolute precision and homogeneity of the coatings as well as maximum values for transmission in the passband and optical density in the off-band range are guaranteed for all filters. FEATURES Professional visual and photographic filter for astronomy Improves deep sky nebula constellation photography Best choice for broadband light pollution suppressionFilter diameter: 2.0 inch / 50.8mm Connecting thread: M48x0.75mmSelected optical glass material Spectrum: 380-750nm Surface Quality: 60/40 (Refer to MIL-O-13830) Fine-optically polished glass to ensure accurate 1/4 wavefront and highest parallelism over the both surfaces High transmission at major nebula emission lines (i.e. H-alpha 656nm, OIII 496nm&500nm, SII 672nm and H-beta 486nm)Precision off-band blocking, specifically the major emission lines of artificial light pollution (i.e. Na 589nm, Hg 435nm and 578nm)SCOPE OF DELIVERY L-Pro filter (1pc) Dust protection box (1pc)

£214.00*
EXPLORE SCIENTIFIC OPTOLONG 2'' L-eNhance Deep-Sky Light Pollution Filter
L-eNhance Filter for deep sky nebula photography from the cityThe relentless spread or urbanization and its associated light pollution have become a growing problem for all amateur astro photographers. The current solutions to the problem can be expensive and might include the purchase of a monochrome camera, several types of narrowband filters and a filter wheel. Especially with inexpensive newtonian telescopes, double-lens ED refractors or even achromats, the L-eNhance filters open up completely new possibilities for the capture of high-class astronomical images even out of the light polluted city. CMOS cameras can deliver images like monochrome cameras. This new generation of filters makes it possible to take amazing astrophotos directly from the light-polluted city with all its artificial light sources. The narrow bandpass for the wavelengths of O-III, H-Beta and H-Alpha and the almost complete attenuation of the interfering light sources of these new filters make this an ideal solution. L-eNhance Description  L-eNhance provides an economical and practical solution for amateurs. It is a tri-band pass filter which has been designed for DSLR (digital SLR), color CMOS and monochrome CCD cameras. The convenience and cost-effectiveness of this filter allows amateurs to take a rich selection of astronomical images, even in bright, heavily light-polluted areas. We believe the design of our L-eNhance filter is a technical innovation among filters. It effectively isolates the H-Alpha, H-Beta, and Oxygen III nebula emission lines and achieves a maximum transmission of up to 90%. The performance of this filter delivers images that superbly control the impact from light polluted skies.  Main Use and PerformanceThis new generation of filters makes it possible to take amazing astrophotos directly from the light-polluted city with all its artificial light sources. The narrow bandpass for the wavelengths of O-III, H-Beta and H-Alpha and the almost complete attenuation of the interfering light sources do not require very large or extremely expensive telescopes. No, especially with inexpensive newtonian telescopes, double-lens ED refractors or even achromats, these filters open up completely new possibilities for high-class astronomical images. Furthermore, with the help of these filters, CMOS colour cameras can deliver an image quality that comes close to CCD monochrome cameras. WARNING: These nebula filters are not designed for sun observation. DO NOT LOOK AT THE SUN WITH THIS FILTER. You will go BLIND if you ignore this warning. Coating technology L-eNhance has a multiple anti-reflective coating on the optical substrate. The L-eNhance filter uses a precision coating based on ion deposition coating technology. This ensures durability and scratch resistance as well as stability on the CWL (central wavelength), which is not affected by temperature changes. Absolute precision and homogeneity of the coatings as well as maximum values for transmission in the passband and optical density in the off-band range are guaranteed for all filters. FEATURES Professional photographic filter for astronomy Improves deep sky emission nebula photography Best choice for enhanced light pollution suppression For taking pictures also from highly light-polluted areas Tri-band filter with high transmission for O-III, H-Beta and H-Alpha linesDoes not require very large or extremely expensive telescopesExcellent results also with inexpensive newtonian telescopes, double-lens ED refractors or even achromatsCMOS colour cameras can deliver an image quality that comes close to CCD monochrome cameras Balanced colour for a natural image Filter diameter: 2,0 inches / 50,8 mm Connecting thread: M48x0.75mmSelected optical glass material Spectrum: 300-1000nm Off-Band Blocking: > 99% Surface Quality: 60/40 (Refer to MIL-O-13830) Fine-optically polished to ensure accurate 1/4 wavefront and highest parallelism over the both surfacesHigh transmission at major nebula emission lines (i.e. H-alpha 656nm, OIII 496nm&500nm and H-beta 486nm). SCOPE OF DELIVERY L-eNhance filter (1pc) Dust protection box (1pc)

£214.00*
EXPLORE SCIENTIFIC OPTOLONG 2'' L-eXtreme Deep-Sky Light Pollution Filter
L-eXtreme Filter for deep sky nebula photography from the city The relentless spread or urbanization and its associated light pollution have become a growing problem for all amateur astro photographers. The current solutions to the problem can be expensive and might include the purchase of a monochrome camera, several types of narrowband filters and a filter wheel. Especially with inexpensive but fast newtonian telescopes, double-lens ED refractors or even achromats, the L-eXtreme filters open up completely new possibilities for high-class astronomical images even from the light polluted city. CMOS cameras can deliver images like monochrome cameras. This new generation of filters makes it possible to take amazing astrophotos directly from the heavily light-polluted city with all its artificial light sources. The dual narrow bandpass for the wavelengths of O-III and H-Alpha and the almost complete attenuation of the interfering light sources of these new filters make this an ideal solution. L-eXtreme Description L-eXtreme is a two 7nm narrow bandpass filter which can be used with one-shot color cameras like DSLRs (digital SLR), color CMOS and monochrome CCD cameras. The convenience and cost-effectiveness of this filter allows amateurs to photograph rich emission nebulas, even in bright, heavily light-polluted skies. The L-eXtreme filter is the better choice for fast optical systems at a competitive price. It isolates the H-Alpha and Oxygen III nebula emission lines so that the contrast and signal-to-noise ratio between nebulae are maximized. The design of our L-eNhance filter is a technical innovation among filters. For people who live in heavily light polluted areas or when the moon is out, the L-eXtreme is a very good choice. Main Use and Performance This new generation of filters makes it possible to take amazing astrophotos directly from the light-polluted city with all its artificial light sources. The narrow bandpass for the wavelengths of O-III and H-Alpha and the almost complete attenuation of the interfering light sources do not require very large or extremely expensive telescopes. No, especially with inexpensive but fast newtonian telescopes, double-lens ED refractors or even achromats, these filters open up completely new possibilities for high-class astronomical images. Furthermore, with these filters CMOS colour cameras can deliver an image quality that comes close to CCD monochrome cameras. WARNING: These nebula filters are not designed for sun observation. DO NOT LOOK AT THE SUN WITH THIS FILTER. You will go BLIND if you ignore this warning. Coating technology L-eXtreme has a multiple anti-reflective coating on the optical substrate. The L-eXtreme filter uses a precision coating based on ion deposition coating technology. This ensures durability and scratch resistance as well as stability on the CWL (central wavelength), which is not affected by temperature changes. Absolute precision and homogeneity of the coatings as well as maximum values for transmission in the passband and optical density in the off-band range are guaranteed for all filters.  FEATURESProfessional photographic filter for astronomyImproves deep sky emission nebula photography Best choice for extreme light pollution suppression For taking pictures also from highly light-polluted areas Dual-narrow-band filter with high transmission for O-III and H-Alpha linesDoes not require very large or extremely expensive telescopesExcellent results also with fast inexpensive newtonian telescopes, double-lens ED refractors or even achromatsL-eXtreme filter is the better choice for fast systems at a competitive priceCMOS colour cameras can deliver an image quality that comes close to CCD monochrome cameras Filter diameter: 2.0 inches / 50.8 mmConnecting thread: M48x0.75mmSelected optical glass material Spectrum: 300-1000nm Off-Band Blocking: > 99 % Surface Quality: 60/40 (Refer to MIL-O-13830) Fine-optically polished to ensure accurate 1/4 wavefront and highest parallelism over the both surfacesHigh transmission at major nebula emission lines (i.e. H-alpha 656nm and OIII 496nm&500nm)SCOPE OF DELIVERY L-eXtreme filter (1 pc) Dust protection box (1 pc)

£298.00*

Similar products

%
EXPLORE SCIENTIFIC Zero X Field Flattener 2''/M48 for ED80, ED102 and ED127 APO
Field flattener without reduction factor for Explore Scientific ED80 , ED102 and ED127 APO Refractors The imaging plane of many telescopes is not flat but curved. This means that only the area in the centre is perfectly focused - the edge becomes blurred. The human eye can usually compensate for this image property, but a camera shows increasing blurriness towards the edge of the image field. The Explore Scientific Zero X field flattener eliminates the field curvature in many telescopes with a focal length of approx. 480 to 952 mm. The Zero X field flattener was calculated and developed for Explore Scientific ED80, ED102 and ED127 apochromats with focal ratios of F=6.0 and F=7.5. The image sharpness at the edge is dramatically increased. The stars appear round and no longer distorted - a clear benefit for the whole image aesthetics. The Zero X image flattener can be used not only with Explore Scientific Apos, but also with many other Apos. This flattener does not change the focal length of the telescope. Correction for up to full-frame camera sensors (24x36mm) The Explore Scientific Zero X image flattener has been developed due to the rapid development of ever larger camera sensors. With it, there is finally a field flattener available that illuminates and corrects the field of view for full-frame camera sensors up to 24x36 mm. How to use the Zero X field flattener with M48 thread connection This field flattener has a 2 inch (50.8 mm) plug-in connection on the telescope side, with which it is inserted into the telescope instead of an eyepiece or star diagonal mirror. On the camera side, there is a standardised M48 x 0.75 mm connection thread. This M48 connection thread offers a larger free inner diameter than the usual T2 (M42) thread and prevents vignetting when using large camera sensors. With an optionally available and camera-specific adapter ring, a DSLR camera can be connected to it. The working distance is already set at 55 mm. Of course, mirrorless cameras or special astro cameras can also be used with the M48 thread connection. For this, the appropriate M48 spacer sleeves or adapters are additionally required to set the right working distance of 55 mm. This must always be done with every corrector or field flattener so that the best possible field flattening is achieved.Filter thread on telescope side availableThe telescope-side 2.0 inch plug-in sleeve has an M48x0.75 filter thread (internal thread). Individual 2.0 inch colour or nebula filters can be inserted here to increase the contrast of the images.FEATURESField flattener for Explore Scientific ED80, ED102 and ED127 APO telescopesRemoves field curvature from telescopesProduces round stars even at the edge of the image fieldImage sharpness at the edge is drastically increasedA clear benefit for the whole image aestheticsCorrection of field curvature for up to full-frame camera sensors (24x36 mm)Image field flattener without reduction factorOn the telescope side with 2 inch (50.8 mm) plug-in connection and M48x0.75mm filter threadCamera side with large M48 threaded connectorWorking distance of 55 mm between field flattener and camera sensorFor telescopes with a focal length of approx. 480 to 952 mmOptimised for telescopes with focal ratios from F=6.0 to F=7.5Can also be used for various other APOsFully multi-coating on all lens surfacesHousing made of lightweight aluminium, black anodisedAluminium dust cap for M48 threadSCOPE OF DELIVERYZero X field flattener (1 piece)Dust caps

£129.00* £179.00* (27.93% saved)
EXPLORE SCIENTIFIC Extension Ring Set M48x0.75 - 5 pieces (30, 20, 15, 10 and 5 mm)
Five extension tubes from 30 to 5mm length with thread connection M48x0,75mm in a set. For adjusting different distances of the camera to the focal plane of the telescope or the corrector/field flattener. There is an M48.0,75 internal and external thread in each individual tube. The M48x0.75 thread is also called large T2 photo thread or 2.0 inch filter thread. Camera specific bayonet adapters or color and nebula filters can be used. Included are 5 different tubes with the steps 30, 20, 15, 10 and 5 mm. The larger free inner diameter of 45.0 mm effectively prevents undesired vignetting of the camera sensor. The outer diameter of the sleeves is exactly 50.65 mm and can therefore be mounted directly in any 2 inch diameter eyepiece adapter. FEATURES Extension sleeves M48x0,75 in set Five extension sleeves: 30, 20, 15, 10, 5 mm Use with correctors and field flatteners Distance adjustment from camera to focal plane Suitable for camera-specific bayonet adapters Also suitable for 2.0 inch colour and nebular filters Internal and external thread M48x0.75 mm (large T2 thread) Large inner diameter of 45.0 mm Outer diameter is 50.65 mm (2 inches) Black matt anodized aluminium Total weight 85 grams SCOPE OF DELIVERY Extension sleeves M48x0.75 (5 pieces)

£51.00*
EXPLORE SCIENTIFIC Camera-Ring M48x0.75 for Canon EOS
Camera specific bayonet adapter (camera ring) for Canon EOS DSLR with M48x0.75 mm internal thread for astrophotography. By using the large thread M48x0.75 mm, the vignetting of e.g. a DSLR full format sensor is effectively avoided. Compared to the small T2 thread M42x0.75, this adapter has a free inner diameter of 47.5 mm. This camera ring is made of matt black anodised aluminium and weighs only 40 grams. The light path (overall length) is 10.0 mm. FEATURES Camera-specific bayonet adapter Canon EOS Large female thread M48x0.75 mm Free inner diameter of 47,5mm No vignetting for full format sensors Light path (overall length) is 10.0 mm Made of matt black anodized aluminium Weight only 40 grams SCOPE OF DELIVERY Camera ring for Canon EOS (1 piece)

£23.00*
Vixen SD Reducer HD Kit
High-performance flattener and reducer set connection rings for Vixen telescopes SD81S, SD103S and SD115S, as well as the ED predecessor series. High-performance flattener and reducer set The kit consists of a high-performance flattener, a reducer for reducing the focal length, and connection rings (distance ring SD81, EX Tube 66), which were developed for prime-focus astrophotography with the SD81S, SD103S and SD115S telescopes. The flattener and the 0.79x reducer deliver a significant increase in telescope performance and image quality. You obtain a flat and sharp image until the edges, including with a full-frame DSLR camera. Ultra-sharp image over the entire field of view of the DSLR full-frame sensor The SD flattener improves the image quality to the edge of the field of view without changing the original focal length of the telescope. The field of view of the DSLR camera with a full-frame sensor is fully illuminated (44 mm), ensuring that stars appear sharp until the edges of the image. When used in conjunction with the Reducer HD, the focal length is reduced by a factor of 0.79 (f/7.7→6.1) whilst maintaining the 44 mm illumination. High-contrast AS coating The anti-reflex AS coating, which is also used on our high-end VSD 100 f/3.8 astrograph, delivers a high light transmission of 99.9% per lens surface. Loss of light, ghosting and scattered light images are virtually eliminated thanks to the completely matte interior coating. FEATURES Reduces the focal length by a factor of 0.79 Designed for full-frame cameras High-contrast AS coating Ultra-sharp image over the entire field of view Designed for full-frame DSLR cameras Illumination: 44 mm Correct distance to chip: 63.5 mm Designed for the SD81S, SD103S and SD115S Also suitable for the ED81S, ED103S and ED 115S DELIVERY CONTENT SD Flattener HD Reducer HD Adapter ring for SD81 66 mm EX extension tube Dust caps

£467.00*
EXPLORE SCIENTIFIC 3" 0.7x Reducer/corrector
The EXPLORE SCIENTIFIC 3" 0.7x Reducer/corrector, reduces a compatible telescope's focal length by a factor of 0.7x (for around f/8) and 0.8x (for around f/10) respectively. The reducer/corrector not only reduces the focal length but also flattens the field. Although originally developed for the Explore Scientific ED-APOs 127mm and 152mm, the reducer can be used with many systems - for example with the Explore Scientific ED-APOs 102mm and 165mm (please note, this will not work on the Explore Scientific 80mm ED Apo refractors though). With certain telescope focal lengths, a slight restriction of the correction at the edge of the image field can be expected when using full-frame sensors. This unit comes with 3" barrel adaptor for direct focuser thread M54x0.75 (the standard focuser thread of the Explore Scientific Essential series of ED Apos) and T2 camera adaptor. This reducer/corrector features a free aperture of 65mm, so that it can be used even with cameras that have a large sensor - if the telescope allows for this. Note: As previously mentioned, this Reducer/corrector comes with a screw on ring, which fits the standard focuser thread of the Explore Scientific Essential series of ED Apos. For telescopes which are equipped with the 2.5" HEX Focuser, the optional screw-on adapter part no: 0510366 is needed. Other telescopes, not in the Explore Scientific range, with standard 2" push-fit focusers will need the Explore Scientific 2" Adaptor for 3" Corrector - part no: 0510364 to get this reducer correctly fitted. SPECIFICATIONS Reduces the focal length by 0.7x at f/8 Flattens the field for astrophotography Developed for ED127 und ED152 APO telescopes Also fits Explore Scientific ED102 and ED165 telescopes - and others Free aperture: 65mm Inner thread for telescope adaption: M76x0.75mm Outer thread for camera adaption: M72x0.75mm 3" focuser barrel adaptor included Adaptor for Explore Scientific focuser M54x0.75mm included T2 camera adaptor M42x0.75mm included Diameter: 78.5mm; length: 100mm Length without adaptors: 52mm Weight without adaptors: 530g What's Included Reducer/Flattener 3" focuser barrel adaptor Adaptor for Focuser M54x0.75mm T2 camera adaptor M42x0.75mm Dust caps

£392.00*
Vixen Coma Corrector PH for R200SS Newtonian
The Vixen corrector PH is a 3-element Wynne corrector for demanding applications. Designed for the Vixen R200SS Newtonian reflector, but also suitable for other optics with similar specifications.The optical design consists of 3 lenses in 3 groups. The corrector provides excellent correction of system-induced coma of parabolic mirrors and the resulting spherical aberration. The corrected field has a diameter of 44 mm, making it suitable for the 24x36 mm format (full-frame DSLR/CCD cameras). This guarantees razor-shape images across the entire field. The lens surfaces are coated with a cutting-edge 99.9% anti-reflective AS coating, which is also used for Vixen's flagship VSD100F3.8.Turn your Vixen R200SS reflector telescope into the perfect astrograph!FEATURESPremium coma corrector for the R 200SS Newton refelctor 3 lens systems in 3 groups, guarantees absolute colour purity and sharp stars to the edge of the field of viewImage illumination up to 44 mm for full-frame imagesReduces the focal length of the R 200SS from 800 mm to 760 mm 1:3.8Also suitable for visual observations with an eyepiece adapterWeight: 175 gDELIVERY CONTENTComa correctorDust caps on front and back

£560.00*
%
EXPLORE SCIENTIFIC MPCC Field Flatt. ED APO+Canon EOS T2
The image plane of many telescopes is not plane, but curved. This results in a picture that has its optimal focus only in the center of the field of view - the edge of the field is out of focus and thus unsharp. The human eye is able to accomodate most of this but a camera will show stars that get increasingly unsharp towards the edge of the field. The Explore Scientific Multi Purpose Curvature Corrector eliminates field curvature in a variety of telescopes - Explore Scientific Apos and many other refractors and cassegrain telescopes. This increases the edge sharpness in the image drastically. Improves edge sharpness not only with Explore Scientific Apos, but also with many other refractor and cassegrain telescopes. This image field leveller fits all Canon EOS cameras, but can also be used for other camera types due to the universal T2 thread connection. This requires an optional camera-specific T2 ring. SPECIFICATIONSImage flattener for Canon EOS cameras Eliminates the field curvature of ED APO telescopes Can also be used for various cassegrains The image sharpness at the edge is drastically increased 2 inch/50.8mm push-in connector with filter thread T2 threaded connection (M42x0,75mm) Full multi-coating on all lens surfaces Stainless steel housingAdapter for Canon EOS bayonet included DELIVERY SCOPE Bildfeldebner Canon EOS (1 piece)

£73.00* £145.00* (49.66% saved)
EXPLORE SCIENTIFIC HR Coma Corrector
After three years of testing and refining we are extremely proud to present the new Explore Scientific High Resolution (HR) Coma Corrector. This corrector is a class of it´s own - it is fully functional for visual use and expands the focal length by only 6%! The Explore Scientific Coma Correktor is delivered as a complete set together with a rotating helical focuser with laser-etched scale, so you get a full package: corrector, adaptor to T2 (M42x0.75mm), adaptor to M48 (M48x0.75) and the helical focuser for visual fun. This coma corrector really is "high resolution" - it deliveres a visual polystrehl performance of 0,98 at f/4 and 0,96 at f/3! So it can stay in the telescope - and you will not only enjoy a tack-sharp Jupiter, but aslo sharp and defined moons in the future! What this means in terms of performance is shown in the three pictures with the graphs - the sharpness increase in those comparisons with and without corrector are stunning (examples are 400mm f/4, f/3,5 and f/3). Please notice: These graphs are for FLAT FIELD! You will get this performance without refocussing! Diameter of the field is 30mm - it doesn´t make sense to increase this with 2" and fast optical systems. Length of the 2" corrector barrel is approx. 85mm and it can be used with almost all 2" focusers on the market. To use the HR Coma Corrector visually, you need to have at least 32mm spare inward travel at your focuser, while the focus is on the same plane as the focusers end. Photographically there is no problem - the HR Coma Corrector shifts the focus outward by about 35mm, so that you will have no problem in achieving focus, when you are able to focus your camera without the HR Coma Corrector. FEATURESEliminates coma, field-curvature and astigmatism in newtonians Diffraction limited performance on axis and in the field Flattens the field Works for very fast systems down to f/3 Four-lens construction Can be used with almost all 2" focusers on the market SCOPE OF DELIVERY High Resolution (HR) Coma Corrector Adaptor to T2 (M42x0.75mm) Adaptor to M48 (M48x0.75) Helical focuser

£345.00*
EXPLORE SCIENTIFIC Hexafoc 2.5 adaptor for 3" 0.7x Corrector
This adaptor enables you to connect the 0510360 0.7x focal reducer/field flattner to telescopes that feature the 2.5" Hexafoc. The big inner diameter of the 2.5" Hexafoc is fully utilised with this adaptor to avoid vignetting.What's Included1x Hexafoc 2.5 adaptor for 3" 0.7x Corrector ring

£52.00*
%
EXPLORE SCIENTIFIC MPCC Field Flatt.ED APO+NikonT2
The image plane of many telescopes is not plane, but curved. This results in a picture that has its optimal focus only in the center of the field of view - the edge of the field is out of focus and thus unsharp. The human eye is able to accomodate most of this but a camera will show stars that get increasingly unsharp towards the edge of the field. The Explore Scientific Multi Purpose Curvature Corrector eliminates field curvature in a variety of telescopes - Explore Scientific Apos and many other refractors and cassegrain telescopes. This increases the edge sharpness in the image drastically. Improves edge sharpness not only with Explore Scientific Apos, but also with many other refractor and cassegrain telescopes. This image field leveller fits all Nikon DSLR cameras, but can also be used for other camera types due to the universal T2 thread connection. This requires an optional camera-specific T2 ring. SPECIFICATIONSImage flattener for Nikon DSLR cameras Eliminates the field curvature of ED APO telescopes Can also be used for various cassegrains The image sharpness at the edge is drastically increased 2 inch/50.8mm push-in connector with filter thread T2 threaded connection (M42x0,75mm) Full multi-coating on all lens surfacesStainless steel housing Adapter for Nikon F bayonet included DELIVERY SCOPE Bildfeldebner Nikon (1 piece)

£73.00* £145.00* (49.66% saved)
EXPLORE SCIENTIFIC Camera-Ring M48x0.75 for Nikon
Camera specific bayonet adapter (camera ring) for Nikon DSLR with M48x0.75 mm internal thread for astrophotography. By using the large thread M48x0.75 mm, the vignetting of e.g. a DSLR full format sensor is effectively avoided. Compared to the small T2 thread M42x0.75, this adapter has a free inner diameter of 41.2 mm. This camera ring is made of matt black anodised aluminium and weighs only 30 grams. The light path (overall length) is 8.0 mm. FEATURES Camera-specific bayonet adapter NikonLarge female thread M48x0.75 mm Free inner diameter of 41,2mm No vignetting for full format sensors Light path (overall length) is 8.0 mm Made of matt black anodized aluminium Weight only 30 grams SCOPE OF DELIVERY Camera ring for Nikon (1 piece)

£23.00*
Vixen Reducer HD
Above-average contrast The Reducer HD features the optical coating that was developed by Vixen for our high-end VSD100F3.8 astrograph. The AS coating provides light transmission of up to 99.9% per lens surface. The special matte surface in the interior also minimizes ghosting, light loss and lens flares. Reducer HD in combination with SD telescopes The Reducer HD can be used on telescopes from the SD series (SD81S, SD103S and SD113S) with the SD Flattener HD Kit (item #37246) . The Reducer HD reduces the focal length by a factor of 0.79x (f/7.7 to f/6.1) and delivers a razor sharp image over the entire 44 mm image sensor surface on DSLR cameras. Reducer HD in combination with AX103S and VC200L telescopes In addition to the SD telescopes, the Reducer SD is also compatible with the AX103S and VC200L telescopes. With these telescopes, the focal length is reduced by a factor of 0.77x.FEATURESUp to 99.9% light transmission per lens surfaceReduces the focal length by a factor of 0.79xAlso suitable for full-frame DSLR camerasFor the ED/SD 81S, 103S, 115SAS coating with light transmission of up to 99.9% DELIVERY CONTENTVixen Reducer HDDust caps

£326.00*

Customers also viewed

NATIONAL GEOGRAPHIC 114/500 Compact Telescope
With its 114-mm aperture, this telescope collects three times more light than a 76-mm telescope. Therefore, fainter objects become visible, and you can see more details of the moon and planets. Nevertheless, the telescope is very compact and sets up quickly, with no assembly required, so it can be transported to your favourite night-sky-observation location easily. Use is very intuitive, without compromising stability. The built-in accessory tray keeps the eyepieces handy, and the red-dot finder makes locating objects simple.Please note: Reflector telescopes with optical design “Newton” are very good for astronomical observing at the starry night sky. But these telescopes are not well usable for observing landscape and nature during daylight. Therefore we suggest refractor (lens) telescopes for landscape and nature observing. FEATUREScompact Dobson telescopeeasy to handle particularly for beginnersintegrated compassSCOPE OF DELIVERYtelescope2 eyepieces (6 mm, 20 mm)Barlow lens 2xmoon filterLED findersoftware

£162.99*
%
EXPLORE SCIENTIFIC MPCC Field Flatt.ED APO+NikonT2
The image plane of many telescopes is not plane, but curved. This results in a picture that has its optimal focus only in the center of the field of view - the edge of the field is out of focus and thus unsharp. The human eye is able to accomodate most of this but a camera will show stars that get increasingly unsharp towards the edge of the field. The Explore Scientific Multi Purpose Curvature Corrector eliminates field curvature in a variety of telescopes - Explore Scientific Apos and many other refractors and cassegrain telescopes. This increases the edge sharpness in the image drastically. Improves edge sharpness not only with Explore Scientific Apos, but also with many other refractor and cassegrain telescopes. This image field leveller fits all Nikon DSLR cameras, but can also be used for other camera types due to the universal T2 thread connection. This requires an optional camera-specific T2 ring. SPECIFICATIONSImage flattener for Nikon DSLR cameras Eliminates the field curvature of ED APO telescopes Can also be used for various cassegrains The image sharpness at the edge is drastically increased 2 inch/50.8mm push-in connector with filter thread T2 threaded connection (M42x0,75mm) Full multi-coating on all lens surfacesStainless steel housing Adapter for Nikon F bayonet included DELIVERY SCOPE Bildfeldebner Nikon (1 piece)

£73.00* £145.00* (49.66% saved)
BRESSER Messier AR-102/1000 EXOS-2 GoTo Telescope
NEW - now including a high-quality aperture Solar-filter for safe observation of sunspots, eclipses and planet transits. Great telescope for night and solar observation. Ambitious beginners and advanced observers alike will see the brightest objects outside our solar system with the BRESSER Messier AR-102. Watch details in the Great Orion Nebula from the astonishing distance of 1500 light-years (14.200.000.000.000 km)! The rock-solid mount provides relaxed views even at high magnifications; rigidity and usability are setting new standards in this price range. Due to the sophisticated mount you can even start taking pictures of the moon, planets or deep sky objects. You will never give the BRESSER Messier AR-102 away voluntarily. CHARACTERISTICS OPTIC Optical design: refractor telescopeLens diameter: 102mm / focal length: 1000mm / F/9,8Maximum recommended magnification: 204xHigh-quality and light gathering achromatic objective lens Modern multi-coating of the lenses for a bright and high-contrast image Robust aluminium tube construction Very high quality Hexafoc focuser with 2.5" free inner diameter 6x30 viewfinder with crosshair eyepiece; optimised finder mount for comfortable viewing 31.7mm (1.25") zenith mirror Hand grip for comfortable transport with integrated camera holder (photo thread screw) Prism rail with stainless steel clamping surface (44mm universal dovetail for GP/EQ5/LXD75) 50.8 to 31.7mm adapter with integrated T2 adapter (optional T2 ring required) Smartphone adapter for celestial navigation included Telescope for night and solar observing CHARACTERISTICS MOUNT Stable parallactic mount with fine drive in both axes Ball bearings in both axes for more precise movements Stable height adjustable stainless steel tripod ( Min. 69cm / Max. 109,5cm ) Load capacity up to 13 kg payload Circular bubble for easy horizontal alignment GoTo Mount with motors and hand box controller, for easy finding and guiding moon, planets, stars and much more ST-4 compatible autoguider interface Pole height scale for setting the latitude Scaled graduated circular rings to facilitate finding objects using a star atlas or planetarium software Pole finder scope with optional illumination ( item no. 4964212 ) Tripod weight: 4.7 kg Mount weight: 6.7 kg (without counterweight) Total weight incl. counterweight: 15.9 kg Batteries: not included Scope of delivery optical tube 26mm Super Plössl eyepiece (31.7mm / 1.25") 31.7mm (1.25") zenith mirror integrated 31.7 mm and T2 adapter Prism rail with stainless steel clamping surface (44mm universal dovetail for GP/EQ5/LXD75) 6x30 viewfinder Rotatable star chart Lens solar filter Tube clamps with carrying handle and camera mount Smartphone adapter for celestial navigation Astronomy PC software Stellarium (via download) Equatorial EXOS 2 GOTO mount and Startracker handheld computer Stainless steel tube field tripod with accessory tray 1 x 4.5 kg counterweight

£1,028.00*