EXPLORE SCIENTIFIC Truss Dob Counter Weight Set

Counter Weight Set

  • 2x Counter weight each 1.0kg
  • 1x Counter weight rod
  • 1x Mounting material

£34.00*

Available, delivery time: 2-4 days

Product number: 0116901
EAN: 4007922028132
WEEE-Reg.-Nr.: DE 34323861

With BRESSER, you can enjoy a smooth introduction to the vast world of astronomy. Our detailed information ("Telescope Guide") provides valuable tips for beginners—but even experienced astronomers can use the information we provide (e.g., tables for the geographical latitude of all major world cities) as a reference.

Here is the table of contents of the comprehensive BRESSER Telescope Guide:

Sky Guides by Bresser

The Sky Guide provides comprehensive information on constellations, planetary positions, and astronomical events – perfect for planning your observations and delving deeper into astronomy.
Visit the guide directly here to make the most of your observations!
Product information "EXPLORE SCIENTIFIC Truss Dob Counter Weight Set"
Counter Weight Set to retrofit all Explore Scientific Dobson Telescopes. Get your telescope perfectly balanced even you are using heavy eyepiece with coma corrector, a binoviewer or big finder scopes. The counter-weight rod has 14,0 mm in diameter. The fixing thread is a metric M10 with hex nut.

Delievery content:
  • 2 x Counter weight each 1.0kg
  • 1 x Counter weight rod
  • 1 x Mounting material
Batteries included: No
Batteries required: No
Colour: yellow
ED glass: No
Extended warranty (years): 5
Material: Metal
Reticle: No
Tripod height adjustment: No

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Product and safety instructions


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • General warning instructions DANGER! RISK of bodily injury! Never look directly at the sun or near the sun through this device. There is a risk of blindness! Sharp-edged and pointed tools are often used with this device. Therefore, store this device and all accessories and tools in a place inaccessible to children. There is a RISK of injury! Children may only use the device under supervision. Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a risk of suffocation! FIRE HAZARD! Do not expose the device – especially the lenses – to direct sunlight! The light concentration could cause fires. NOTE! Do not dismantle the device! In case of a defect, contact your dealer. They will contact the service center and may send the device in for repair. PRIVACY PROTECTION! The telescope is intended for private use. Respect the privacy of others – for example, do not use this device to look into apartments!

Similar products

Explore Scientific ASTRO R-LITE red light Flashlight
The ASTRO R-LITE red light flashlight is the ideal companion at night to read star charts or make adjustments to the equipment without losing the dark adaptation of the eyes. The ASTRO R-LITE offers 3 functions: Continuous light bright / Continuous light dark / Flashing. The large diffusing lens results in a very large and evenly illuminated light cone, which can also be adjusted by a sliding mechanism. By using a power-saving LED lamp, the battery life (1 x AA-LR6) is up to 100 hours. Of course, the robust lamp housing made of aluminium is splash-proof according to IPX4 and therefore particularly well suited for outdoor applications. The side cutouts on the front of the ASTRO R-LITE provide a 360° signal function. The 50 cm long carrying strap with quick coupling and an extra belt clip included in the scope of delivery ensure that the flashlight is always quickly at hand. The ASTRO R-LITE should not be missing in any equipment. FEATURES ASTRO R-LITE Red Light Flashlight Reading star maps at night Dark adaptation of the eyes is retained Continuous light bright / Continuous light dark / Flashing 360° signal function Large diffusing lens produces a uniformly illuminated light cone Carrying strap and belt clip included Battery life up to 100 hours - Battery (1 x AA-LR6) Splash-proof according to IPX4Robust lamp housing made of aluminiumSCOPE OF DELIVERYASTRO R-LITE Red Light Flashlight Carrying strap Belt clip Battery (1 x AA-LR6)

Available

£16.00*
BRESSER Laser Collimator 31.7mm (1,25")
The laser-collimator makes aligning the mirrors of a Newtonian telescope simple, fast and precise. With the laser you collimate your optics even in the dark without additional accessories. Precisely machined it fits a 1,25" focuser without tilting. The built-in projection area enables collimating even long focal length scopes in a breeze. Suitable for Newtonian, Schmidt-Newtonian and Maksutov-Newtonian teleskopes. FEATURES31.7mm(1.25") Eyepiece Barrel Diameter Machined anodized aluminum housing with all internal surfaces coated non-reflective flat blackBuilt in laser collimatableIMPORTANT: Laser products have to be kept out of reach of children!

Available

£74.90*
BRESSER Counterbalance 4,5kg for EXOS-2/EQ5
Additional counterweight to balance heavy accessories etc.

Available

£39.90*
BRESSER Dew-Shield for MCX127/MC127 telescopes
Each dew shield threads into the front lens cell and effectively inhibits the formation of dew on the lens surface in humid/cool observation conditions. Reduces reflections caused by scattered light incident from the side. Protects the front lens from accidental contact and scratches. FEATURES Prevents fogging of the front lens Reduces reflections caused by stray light Protects the front lens of the telescope Use in humid/cool conditions Suitable for BRESSER MCX127/MC127 telescopes Easy to screw into the telescopic tube Length: 120mm , weight: 160g SCOPE OF DELIVERY Dew cap, 1 piece

More is on the way

£34.00*
BRESSER Counterbalance 2.0 kg for EXOS-1 + 2
Additional counterweight to balance heavy accessories etc.FEATUREScolor matched with the Bresser EXOS-1/2 seriessuitable for counterbalance bar with 20mm diameterSCOPE OF DELIVERY1x counterbalance 2.0kg

Available

£29.90*
Vixen adjustment shaft, 300 mm, flexible
300 mm adjustment shaft with flexible design for comfortable observations with the Porta II and the Mini Porta.The large adjustment knobs allow you to make smooth, fine adjustments to the axles.Also compatible with a wide range of other mounts from other manufacturers.FEATURESComfortable tracking by handLarge adjustment knobs for fine tuningDesigned for wide range of mountsLength: 300 mmDELIVERY CONTENT300 mm adjustment shaft

Available

£23.00*
BRESSER Dovetail clamp Messier/ES/GP/Vixen
Universal dovetail clamp suitable for all optical tubes which are equipped with a standard 44mm dovetail rail (Messier/ES/GP/Vixen).  Also a screw kit is included for mounting the dovetail clamp direct on the top of the handle of all BRESSER Messier und EXPLORE-SCIENTIFIC telescopes. Thus a parallel mounted guiding telescope can be set up very easy and enables long exposure astrophotagraphy with autoguiding.  The prism clamp has 2 x 6mm countersunk holes (35mm hole spacing) and 3 additional 1/4" photo tapped holes at 120 degrees angular distance on a pitch circle diameter of 55 mm to allow a versatile adaptation to a variety of other telescopes and adapter plates.FEATURESUniversal dovetail clamp  Suitable for 44mm dovetail rail of Messier/ES/GP/Vixen  Screw set for Messier/ES handle included For piggy-back mounting of a guiding telescope Enables astrophotography with autoguiding CNC machined Aluminum Additional 1/4" photo thread holes available SCOPE OF DELIVERY Dovetail clamp Screw set (2pcs M6x25mm)

Available

£39.00*
EXPLORE SCIENTIFIC Counter Weight 1.0 kg for iEXOS-100 Mount
Additional Counter Weight 1.0 kg for EXPLORE SCIENTIFIC iEXOS-100 PMC-Eight Wifi Goto Mount to balance also larger telescope tubes.FEATURESAdditional counter weightBalance also larger telescope tubesFits to iEXOS-100 MountTotal weight: 1.0kgDiameter: 80mm; height: 30mmBore diameter: 14.7mmSCOPE OF DELIVERYCounter weight 1.0kg (1 pc)

Available

£31.00*
Vixen SG-L02 Headlamp red-light white-light
The perfect LED head torch for nighttime observations! Adjusting your eyes to the dark surroundings is very important when making astronomical observations. In dark areas, it is very difficult to use astronomical equipment without a suitable light. With normal lights, however, the light intensity is more important than protecting your eyes against bright light. Using these lights at night makes your pupils contract, which can make it difficult for your eyes to readjust to the darkness. The SG-L01, our first astronomy LED lamp, featured a built-in red LED that provided a solution to this problem. However, the red light did not offer optimal visibility. On our new astronomy LED light, the SG-L02, the LED lights produce warm light to improve visibility. They also ensure that your eyes stay adapted to the dark. The LEDs do not emit light in the sensitive range of 555 nm. The brightness of the white light can be adjusted between 3 and 42 lumen, while the red light can be adjusted between 0.28 and 7.62 lumen. FEATURES Dimmable red light ensures that your eyes stay adapted to the dark Built-in rechargeable battery, charges via USB Waterproof design LED colour can be switched from red to white 0.28 to 7.62 lumen for red light 3 to 42 lumen for white light Dimensions: 41 mm x 33 mm x 30 mm Weight: 29 g DELIVERY CONTENT SG-L02 head torch Strap (size S) Strap (size L) Pocket clip Cable for charging the battery (USB-A plug to USB Micro-B plug)

Available

£65.00*
%
Vixen Dew Cap Heating
The Vixen dew cap heater prevents your optics from fogging up due to dew.A must-have accessory for cold and damp nights.FEATURES Consumption: 16.2 Ohm (12 V, 8.9 W) Dimensions: 655 mm long heater with 2.2 m cable Connection: 2.1 socket with medium-negative polarity Weight: 120 g DELIVERY CONTENT Battery box Vixen dew cap heater

Available

£92.00* £115.00* (20% saved)
%
EXPLORE SCIENTIFIC Two-Room Pop-UP Observatory Tent / Weather protection for telescopes
The Explore Scientific Two Room Pop-Up Observatory is a useful weatherproof tent that protects your valuable equipment from wind, dew, rain and dust. Most amateur astronomers and astrophotographers dream of having an observatory to keep dust, dew and wind away from their telescope and to shield disturbing stray light from their telescope's optics. But for many astronomers, an observatory is only a dream because of the cost of a roll-roof building or an observatory dome. There is also the problem that an observatory building needs a permanent location that is suitable for an observatory. Portable, quick to set up and inexpensive A good solution is a portable observatory tent. Compared to their fixed counterparts, a tent is extremely inexpensive and can be set up almost anywhere there is a flat surface and a clear view of the sky. However, setting up a portable observatory tent can also be a hassle. No one wants to waste their valuable observing time reading complex instructions while trying to figure out which pole goes where. For this reason, we have used a sturdy pop-up design. Setting up the EXPLORE SCIENTIFIC Pop-Up Observatory can be done in a matter of minutes. By releasing a retaining strap, the complete tent unfolds from its packaging in just a few seconds. You really don't need to do anything other than connect the two observatory rooms with a Velcro seam and attach it to the ground. Thanks to this simple design, the EXPLORE SCIENTIFIC Pop-Up Observatory can be set up and taken down in just a few minutes, giving you plenty of time to enjoy your astronomy weekend. Plenty of space for your equipment and super compact when folded up. With just under 5 square metres of total space and 1.52 metre high side walls, coupled with 1.83 metre high windscreens, the EXPLORE SCIENTIFIC Pop-Up Observatory allows you to set up your computer equipment in one room and the telescope in the other, or set up two complete telescope systems. Each room is 152 by 152 centimetres. Mobile observatory with compact transport dimensions In addition to being easy to set up and take down, another advantage of the pop-up design is that it is travel-friendly, as it is light and easy to stow away. The entire observatory tent folds down to a package 70 centimetres in diameter and 10 centimetres thick. This allows it to be transported in a small car or even on a flight for distant expeditions. And apart from the fact that it allows you to go to your favourite observing site at any time, portable observatory tents are usually the first choice for astronomers and astrophotographers attending star party events.  Advanced materials provide optimal protection and durability However, the fact that the EXPLORE SCIENTIFIC Pop-Up Observatory is lightweight and easy to store and set up doesn't mean it can't withstand bad weather conditions. The Black-Out coated polyamide material is waterproof and offers excellent UV protection. This guarantees reliable protection for your equipment as well as long-lasting durability of the observatory tent. Large doors for convenient use The doors to enter the observatory tent and pass through the attached rooms are very generously sized at 102 centimetres high and 92 centimetres wide, so you can easily walk in and through your equipment. The doors roll down to keep moisture out and their heavy-duty zips will last for years. The extra weather cover protects your gear when not in use. With the large weather cover included, you can protect your gear from the hot sun or a surprise rain shower during the day. Or even from dew at night. The modern, coated and waterproof material keeps all unwanted weather influences away from your equipment. Included are cords and pegs to tie down the tent. The structure also has additional holding straps for the use of heavy-duty straps, which can be purchased at local hardware stores. PRODUCT VIDEO:  https://youtu.be/1rL5PzPa-dQ FEATURESPractical weather protection for telescopes Protects your equipment from wind, dew, rain and dust Mobile observatory: portable, quickly assembled, reasonably priced Compact transport size also suitable for air travel 5 square metres of space for your equipment and sufficient freedom of movement Interior dimensions: 152 x 304cm Side wall height 152cm / windbreak wall height 183cm Large 102 x 92cm doors for ease of use Additional weather protection cover included Advanced materials provide optimum protection and durability Cords and pegs included to tie down the tent Additional tie downs for heavy duty straps included Transport dimensions and weight: diameter 70cm, height 10cm, 3kg Colour tent material: black SCOPE OF DELIVERY Two-room pop-up observatory tent Weather protection cover Set of cords and pegs

Available

£198.00* £269.00* (26.39% saved)
Vixen Lens Heater 360 IV
The 360 IV Lens Heater is designed to prevent camera lenses and telescopes from fogging up due to dew. It is also well suited for eyepieces.The heating element is a carbon fiber heater with a high thermal efficiency. The textile heating element provides great flexibility compared to other heating materials. The power cord (USB cable) has a particularly high flexibility to be still elastic at low temperatures. A very flexible Velcro tape allows for quick and easy attachment to and removal from the lens. The tape can be easily removed from the lens without pulling tightly. The heating tape has a very low power consumption and can be operated with a 10,000 mA battery for up to 14 hours.The Vixen Lens Heater 360 IV in detailWhen moisture in the air comes into contact with an object whose temperature is lower than the ambient temperature, small drops of water form - so-called dew condensation. Astrophotography often suffers from such lens fogging and the photo turns milky. Because the temperature and humidity change during the night and the camera becomes cooler than the ambient temperature, it is important to warm the objective's or telescope's lens by using heaters to prevent it from fogging. We recommend using the Lens Heater 360 IV when you want to do astrophotography or night photography on the coast, in the mountains or in cold regions. The heating elements are made of carbon fibers with improved heating performance, introduced for the fourth generation Vixen Lens Heater 360 IV. They efficiently keep the lens warm and fog-free with minimal power consumption. The heater temperature reaches 10 degrees Celsius above the ambient temperature (at 20 °C outside temperature and no wind). However, it varies according to influences in the environment. For power supply the lens heater is equipped with a detachable coiled cable (USB Type-C), up to 50 cm long. The 360 IV lens heater consumes only 2.5 W of power (5 V - 0.5 A). With a portable USB battery of e.g. 10,000 mA, it can operate continuously for about 14 hours (at 20 °C outdoor temperature). However, the operating time varies greatly depending on the environment and temperature. The soft and non-slip surface of the heating tape allows for easy attachment to the objective, eyepiece or telescope. The heater consists of a 30 mm wide and 600 mm long heating tape and is suitable for diameters up to 100 mm.FEATURESHeating type: carbon fiber textile heatingTemperature: 10 degrees Celsius above ambient outdoor temperature (at 20° C, no wind)Power source, power consumption: USB, 5 V, 0.5 A, 2.5 WPower cable: USB A (male)Connector: USB type C connector detachable coiled cable 20 to 50 cmOperating time: approximately 14 hours with fully charged 10,000 mAh battery (at 20 °C outdoor temperature)Recommended for lenses with a width of 30 mm and an outer diameter of 45 to 100 mmDimensions: 30 x 600 mmTotal weight: 67 gSCOPE OF DELIVERYLens Heater 360 IVUSB spiral cable

Available

£83.00*

Customers also bought

BRESSER Universal Smartphone Adapter Deluxe
Take pictures with your smartphone through the telescope or microskope? With the Smartphone camera adapter this is now child's play! Simply screw the adapter to the eyepiece and use your smartphone as a camera with a super-telephoto / super-macrophoto lens. It lets you take pictures of distant objects or very small objects as if you were very close.The Deluxe version offers an even more comfortable and secure attachment to the eyepiece. By a rotary movement of the clamping ring 3 clamping jaws are evenly applied to the eyepiece housing and the Smartphone adapter sits firmly and centrically on the eyepiece. The fine adjustment of the height of the smartphone support allows a quick and precise adjustment of the viewing height of the smartphone camera above the eyepiece lens. Good image results are thus guaranteed.  FEATURES Take photos through the telescope Smartphone camera with super telephoto lens Fine Height adjustment of phone support Wide adjustment range for eyepiece housing diameter Fits 31.7mm (1.25") eyepieces For eyepiece housing diameters from 22-38mm SCOPE OF DELIVERY Smartphone holder deluxeLocking ring for the smartphone

More is on the way

£14.90*
EXPLORE SCIENTIFIC Star Diagonal Mirror 2" 99%
Diagonals provide a user-friendly observing position for refractors and Cassegrain telescopes. The Explore Scientific 2" Diagonal Mirror here is precision machined from aluminium and contains carbon fibre parts. The large eyepiece port diameter of 2"(50.8mm) is ideal for modern wide angle eyepieces and a non-marring brass compression ring holds the eyepiece in place securely. The dielectric coating of the mirror delivers 99% reflectivity and is very durable against environmental influences. A step-down reducer to 1.25"(31.8mm) is included, so all of your 1.25" eyepieces and accessories can also be used.FEATURES Star diagonal mirror for focuser with 2" barrel High quality flat mirror Dielectrical mirror coating delivers 99% reflectivity Very durable against environmental influences Brass eyepiece clamping ring Housing completely made of metal Dust caps included WHAT'S INCLUDEDdiagonal mirror dust caps

Available

£185.00*
%
EXPLORE SCIENTIFIC 82° Ar Eyepiece 30mm (2")
Explore Scientific 82° Series™ extreme wide field eyepieces are optimized to produce high contrast, high resolution, and superior flat field characteristics. The visual effect of these eyepieces with their long eye-relief and their 82° apparent field is truly a full-immersion experience. Your eye is relaxed, allowing you to easily use the "averted vision" technique to study faint details across a huge field-of-view. The 82° Series eyepieces come with a twist-up rubber eye-guard that raise to the desired height for the comfort of the observer, and as experienced astronomers know, eye comfort is critical when trying to observe at the visual limits of the telescope. To keep internal reflections to a minimum, all internal surfaces of the eyepiece barrel are flat black, as well as the edges of the lenses themselves to minimize the scattering of light within the lenses themselves. All 82° Series eyepieces are fully multi-coated and edge-blackened to produce maximum contrast.

Available

£269.00* £365.00* (26.3% saved)
EXPLORE SCIENTIFIC 1.25" Variable Polarizing Filter
Universally usable variable polarizing filter with a  1.25" filter thread.This variable polarizing filter allows for a continuous adjustment of the image brightness. This is very helpful to level strong differences in contrast of different observation objects individually. Particularly for lunar and planetary observations but also for solar observations this filter prevents an outshining of details.Solar observations ONLY together with an adequate solar filter !!! Particularly when a Herschel wedge is used and with large objective lens apertures the use of the variable polarizing filter can reduce the brightness of the observation object to a confortable level. The large adjustment range of 40% to 1% light transmission and the neutral grey filter effect create a comfortable and unadulterated image.The handling is very simple. The desired filtering level is set by turning the two sides of the housing against each other.A 1.25" filter thread on both sides (female/male) allow for the simultaneous use of additional colour filters.FEATURESvariable polarizing filterindividually adjustable image brightnessmade from high-quality optical glassblack anodized aluminium housing1.25" filter thread on both sidesSCOPE OF DELIVERYpolarizing filterprotective box

Available

£58.00*
EXPLORE SCIENTIFIC 82° Ar Eyepiece 14mm (1,25")
Explore Scientific 82° Series™ extreme wide field eyepieces are optimized to produce high contrast, high resolution, and superior flat field characteristics. The visual effect of these eyepieces with their long eye-relief and their 82° apparent field is truly a full-immersion experience. Your eye is relaxed, allowing you to easily use the "averted vision" technique to study faint details across a huge field-of-view. The 82° Series eyepieces come with a twist-up rubber eye-guard that raise to the desired height for the comfort of the observer, and as experienced astronomers know, eye comfort is critical when trying to observe at the visual limits of the telescope. To keep internal reflections to a minimum, all internal surfaces of the eyepiece barrel are flat black, as well as the edges of the lenses themselves to minimize the scattering of light within the lenses themselves. All 82° Series eyepieces are fully multi-coated and edge-blackened to produce maximum contrast.

Available

£185.00*
BRESSER Laser Collimator 31.7mm (1,25")
The laser-collimator makes aligning the mirrors of a Newtonian telescope simple, fast and precise. With the laser you collimate your optics even in the dark without additional accessories. Precisely machined it fits a 1,25" focuser without tilting. The built-in projection area enables collimating even long focal length scopes in a breeze. Suitable for Newtonian, Schmidt-Newtonian and Maksutov-Newtonian teleskopes. FEATURES31.7mm(1.25") Eyepiece Barrel Diameter Machined anodized aluminum housing with all internal surfaces coated non-reflective flat blackBuilt in laser collimatableIMPORTANT: Laser products have to be kept out of reach of children!

Available

£74.90*

Customers also viewed

EXPLORE SCIENTIFIC 4K DEEP SKY ASTRO Camera & Guider 8,3 MP II
Enter the world of astrophotography now - with the new EXPLORE SCIENTIFIC 4K DEEP SKY ASTRO Camera including ST4 autoguider function. This is truly new: Equipped with the new high-sensitive IMX585 Exmor CMOS colour sensor, this astronomy camera delivers amazing image results with extremely short exposure times even with basic telescope equipment. In addition, this ultra-modern camera can also be used as an autoguider, e.g. to actively track the main imaging device with an SLR or CCD astro camera. An all-round camera that delivers super-sharp and high-resolution planetary images. The high 4K resolution of 3840x2160 pixels guarantees the best possible image result. Sensor The secret to the high light sensitivity is the new back illuminated Exmor CMOS sensor. It increases the quantum efficiency to up to 77 % at 533 nm, which leads to an extremely high light sensitivity and thus particularly bright and high-contrast photos. In addition, the particularly low noise level of this new CMOS sensor generation ensures exceptionally high brilliance and no active cooling is required. Nevertheless, this astro camera has an elaborate internal structure made of aluminium for ideal heat radiation and a fan that can be switched on via software. When used with suitable telescopes, the high native pixel resolution of 3840x2160 enables very nice overview images of the moon, but also detailed planetary images. Solar Imaging This camera is also recommended for solar astro-photography. Especially the Lunt LS40 THa solar telescopes (item No. 0551145/0551146/0551147), with their short focal length, allow in combination with this planetary camera with its large sensor great overview images of the sun. Important Note: When observing and taking photos of the sun, always use a suitable protective solar filter or a special solar telescope. Otherwise there is a risk of immediate blindness and damage to the camera. Software The included Explore Capture professional software offers not only the necessary basic functions for image and video capture, but also many helpful special functions for image post-processing and for setting up the guider. Functions such as live image display, exposure settings, white balance, dark image capture, stacking, timelapse recording and much more can be configured individually. Especially the very sophisticated software makes it really easy for you to get started in astrophotography. With the automatic settings you can produce absolutely presentable results without a lot of prior knowledge. And when you are ready, simply switch off the automatic settings and gradually venture into the individual professional settings. Automatic tracking control Connect the camera directly to the ST4 port of your telescope mount and you have a fully automatic tracking control. Thus, long exposures of several minutes are possible without the stars producing unwanted star traces due to the always existing periodic error of the telescope mount gears. A corresponding ST-4 connection cable is even included in the camera's scope of delivery. Because of the high light sensitivity of the camera, you will always find a suitable guide star even with very short exposure times. Simple automatic tracking at its best. Connection For the connection to telescopes, guiding scopes or off-axis guiders the camera has a 1.25'' socket with 1.25'' filter thread (M28.5x0.6) and a large T2 connection thread (M42x0.75) directly on the housing. IMPORTANT NOTES: This is not a stand-alone guider camera. You always need a Windows 10 or 11 computer to take pictures and for autoguiding. The autoguider software is not included. You can use PHD2 Guiding, GuideDog, Metaguide, Guidemaster (freeware) or AstroArt, MaxIm DL (paid). DOWNLOAD PHD2-Guiding: https://openphdguiding.org/ DOWNLOAD GuideDog: http://barkosoftware.com/GuideDog/index.html DOWNLOAD latest camera software and drivers see download folder "Manuals" or here: https://www.touptek-astro.com/downloads Sample photos made by Lóránd Fényes in Hungary: https://fenyeslorand.hu/naprendszerunk/ https://fenyeslorand.hu/explore_scientific_4k_review/ https://fenyeslorand.hu/asztrofotok/ FEATURESHighly light-sensitive USB 3.0 4K colour camera Suitable for taking pictures of deep sky objects, the Moon and planets Integrated ST4 guiding function Allows very short exposure times for super-sharp planetary images Camera type: EXPLORE SCIENTIFIC G3CMOS08300KPA colour Image sensor: NEW IMX585 Exmor CMOS colour sensor, back illuminated Data output: still images and video Image and video format output: 3840 x 2160 (4K) & 1920 x 1080 (Full HD) pixels Framerate: up to 43 and 66 FPS (for video) Physical sensor size in pixels: 3840 x 2160 (4K) Possible exposure times: 0.1 ms to 60 min Binning: Yes, 1x1 and 2x2 Megapixel: 8.3 MP Sensor size: 11.14 x 6.26 mm Image diagonal: 12.86 mm Pixel size: 2.9 µm x 2.9 µm Bit depth: 8/12 bits, switchable ST-4 compatible autoguider: Yes CNC machined aluminium housing Camera connection diameter: 1.25'' ( 31.7 mm) Camera connection thread: T2 thread (M42x0.75 mm) and 1.25'' filter thread Camera connection to PC: USB 3.0 Required backfocus: 17.5 mm Shutter type: Global shutter Heat radiation via built-in fan (switchable via software) Operating temperature: -10 to +50 °C (30-80 % RLH) Cable length USB 3.0: 150 cm Camera diameter: 68 mm; length: 85 mm Camera weight: 0.3 kg Software: Explore Capture included Camera driver and ASCOM driver and SDK included PC requirements: CPU Intel Core2 2.8Ghz or higher / 2 GB Ram / USB 3.0 Operating system: WINDOWS 10 + 11 Field of view for different focal lengths in minutes of arc: 400 mm - 95.6' x 53.8' 500 mm - 76.5' x 43.0' 600 mm - 63.7' x 35.8' 700 mm - 54.6' x 30.7' 800 mm - 47.8' x 26.9' 900 mm - 42.5' x 23.9' 1,000 mm - 38.2' x 21.5' 1,250 mm - 30.6' x 17.2' 1,500 mm - 25.5' x 14.3' 1,750 mm - 21.8' x 12.3' 2,000 mm - 19.1' x 10.8' SCOPE OF DELIVERY4K Planetary Astro Camera & Guider 8.3 MP 1.25 inch (31.7 mm) plug-in adapter with filter thread USB 3.0 connection cable 150 cm Control cable for ST-4 autoguider function 150 cm Dust cap for camera opening Software (via download) Instruction manual (via download)

Available

£560.00*
Vixen Counterweight 1.9kg
With the 1.9 kg counterweight, heavier optical tubes can be balanced on many Vixen mounts. COMPATIBLE WITH THE FOLLOWING VIXEN MOUNTS SX SX2 SXD SXD2 SXP GP2 GPD2 SCOPE OF DELIVERY 1x 1.9 kg counterweight

Available

£49.00*