Keep out stray and unwanted light from your 10" and 12" Truss Tube Dobsonian telescope with a lightweight light shroud. Keeping the path dark between your secondary and primary mirror will boost image contrast and brightness bringing out more details. Constructed of opaque black nylon with excellent stretch, each end of our DOB light shroud has an elastic band to keep the shroud in place and allow for an easy fit and installation. Breathable nylon will let air circulate and yet keep dust away, keeping your optics clear and avoiding any unnecessary pressure from the breeze. A must have for the suburban observer where stray light interferes.
FEATURES
Keep out stray and unwanted light
Boost image contrast and brightness
Bringing out more details
Keep dust away; avoiding pressure from the breeze
Black nylon with excellent stretch
Fits for 10" and 12" Truss Tube Dobsonian telescope
SCOPE OF DELIVERY
1pc Light Shroud 10"/12"
Colour:
black
Material:
Nylon
Mount Type [Telescopes]:
Dobson
Product Family [Telescopes]:
Reflector telescope
0 of 0 reviews
Leave a review!
Share your experiences with other customers.
Login
No reviews found. Share your insights with others.
Ultra Light Dobsonian 254mm GENERATION II - with completely redesigned and improved construction.No telescope type has influenced amateur astronomy as radically as the
dobsonian telescope. Before the introduction of this telescope type by
John Dobson the vast majority of amateur telescopes were small
inadequate refractors on shaky mounts - just good enough to show the
polar regions on mars or the rings of Saturn. Bigger telescopes, like
the Schmidt-Cassegrain telescopes, were restricted to the relatively
small group of amateurs that could afford them.The brilliant combination
of simple - but effective - mechanics and the largest aperture
available led to a worldwide triumph of this concept. No other telescope
type offers you so much light for your money as a good dobson. We have
taken the motto "held together by gravity and driven by yoghurt power"
and offer a modern version of the classic - designed by amateur
astronomers for amateur astronomers. Despite its large aperture the
telescope can be transported easily even in small cars and is assembled
within minutes without tools. The construction was optimized for maximum
rigidity with a minimum of mass. The combination of big altitude wheels
and a optimized aluminium-sandwich construction allows for small
movements even at high magnifications. The focus position is already
positioned to accept our coma-corrector. The ideal workhorse for the
deep-sky enthusiast. A telescope with 254mm aperture gathers more than
1300-times more light than the naked eye. Details on planetary surfaces
stand out even to unexperienced observers, and countless deep-sky
objects show details. Bright globular clusters are resolved down to the
core and the view of the lunar terminator will provide a unforgettable
experience.Dimensions for mobile use: Rockerbox 395mmx395mmx310mm; Mirrorbox 330mmx330mmx295mm; Trusses approx.700mmEyepiece Height while pointing at zenith approximately 1,15m; 10“ Net total weight: 26,4 kg; 10“ Mirror Box: 14 kg; 10“ Secondary cage +Rockerbox: 9,7kg; 10“ 4 Pairs of trusses: 1,5kg; 10“ Altitude Wheels: 1,2kg ; Focuser thread: M54 x 0.75 mm. Backfocus: 45mm behind the 2" eyepiece holder. 35mm when the 1.25" adapter is mountedSPECIFICATIONS Truss-Dobsonian Telescope in full Aluminium constructionNEW: Slider bearings made from TEFLON und GFK for smooth and precise movementNEW: Improved main mirror cell with completely redesigned mechanicsNEW: Altitude bearings with new designed brake and friction systemNEW: Universal finder slot to enable an easy finder upgradeNEW: Quick-lock fasteners with new springloaded design for comfortable useNEW: Powder-coated yellow altitude wheels to improve durabilityNEW: Laser engraved central mark on main mirrorSCOPE OF DELIVERYTruss Dobsonian TelescopeLED finder with standard finder slotStray light shield for secondary cageMain mirror collimation toolBattery compartment with bag for fansExtension tube for focuserReducer 2"/1.25"Manual
Ultra Light Dobsonian 305mm GENERATION II - with completely redesigned and improved construction.No telescope type has influenced amateur astronomy as radically as the dobsonian telescope. Before the introduction of this telescope type by John Dobson the vast majority of amateur telescopes were small inadequate refractors on shaky mounts - just good enough to show the polar regions on mars or the rings of Saturn. Bigger telescopes, like the Schmidt-Cassegrain telescopes, were restricted to the relatively small group of amateurs that could afford them.The brilliant combination of simple - but effective - mechanics and the largest aperture available led to a worldwide triumph of this concept. No other telescope type offers you so much light for your money as a good dobson. We have taken the motto "held together by gravity and driven by yoghurt power" and offer a modern version of the classic - designed by amateur astronomers for amateur astronomers. Despite its large aperture the telescope can be transported easily even in small cars and is assembled within minutes without tools. The construction was optimized for maximum rigidity with a minimum of mass. The combination of big altitude wheels and a optimized aluminium-sandwich construction allows for small movements even at high magnifications. The focus position is already positioned to accept our coma-corrector. The ideal workhorse for the deep-sky enthusiast. A telescope with 305mm aperture gathers more than 1800-times more light than the naked eye. Details on planetary surfaces stand out even to unexperienced observers, and countless deep-sky objects show details. Bright globular clusters are resolved down to the core and the view of the lunar terminator will provide a unforgettable experience.Dimensions for mobile use: Rockerbox 450mmx450mmx320mm; Mirrorbox 380mmx380mmx300mm; Trusses approx. 980mmEyepiece Height while pointing at zenith approximately 1,4m.12“ Net total weight: 32,1 kg; 12“ Mirror Box: 18,9 kg; 12“ Secondary cage +Rockerbox: 10
kg; 12“ 4 Pairs of trusses: 1,8kg; 12“ Altitude Wheels: 1,4kg ; Focuser thread: M54 x 0.75 mm ; Backfocus: 45mm behind the 2" eyepiece holder. 35mm when the 1.25" adapter is mountedSPECIFICATIONS Truss-Dobsonian Telescope in full Aluminium constructionNEW: Slider bearings made from TEFLON und GFK for smooth and precise movementNEW: Improved main mirror cell with completely redesigned mechanicsNEW: Altitude bearings with new designed brake and friction systemNEW: Larger feet to improve stabilityNEW: Universal finder slot to enable an easy finder upgradeNEW: Counter-weight system included - 2 x 1.0 kg NEW: Quick-lock fasteners with new springloaded design for comfortable useNEW: Powder-coated yellow altitude wheels to improve durabilityNEW: Laser engraved central mark on main mirrorSCOPE OF DELIVERYTruss Dobsonian TelescopeLED finder with standard finder slotStray light shield for secondary cageMain mirror collimation toolBattery compartment with bag for fansCounter-weights 2 x 1.0 kgExtension tube for focuserReducer 2"/1.25"Manual
The ASTRO R-LITE red light flashlight is the ideal companion at night to read star charts or make adjustments to the equipment without losing the dark adaptation of the eyes. The ASTRO R-LITE offers 3 functions: Continuous light bright / Continuous light dark / Flashing. The large diffusing lens results in a very large and evenly illuminated light cone, which can also be adjusted by a sliding mechanism. By using a power-saving LED lamp, the battery life (1 x AA-LR6) is up to 100 hours. Of course, the robust lamp housing made of aluminium is splash-proof according to IPX4 and therefore particularly well suited for outdoor applications. The side cutouts on the front of the ASTRO R-LITE provide a 360° signal function. The 50 cm long carrying strap with quick coupling and an extra belt clip included in the scope of delivery ensure that the flashlight is always quickly at hand. The ASTRO R-LITE should not be missing in any equipment. FEATURES ASTRO R-LITE Red Light Flashlight Reading star maps at night Dark adaptation of the eyes is retained Continuous light bright / Continuous light dark / Flashing 360° signal function Large diffusing lens produces a uniformly illuminated light cone Carrying strap and belt clip included Battery life up to 100 hours - Battery (1 x AA-LR6) Splash-proof according to IPX4Robust lamp housing made of aluminiumSCOPE OF DELIVERYASTRO R-LITE Red Light Flashlight Carrying strap Belt clip Battery (1 x AA-LR6)
With the 3-piece lens cleaning set you not only clean camera or binocular lenses, but also spectacles glasses and displays and screens of smartphones, laptops, tablets, etc. thoroughly and safely.
When cleaning high quality optical lenses, you have to be very careful. After all, it would be very annoying to successfully remove the dust but leave a scratch behind. With the lens cleaning pen you can safely clean optical and coated glass.
With the brush on one side you can remove coarser dirt before polishing the lenses with the other side. Just blow away fluff with the bellows.
FEATURES
complete set for safe cleaning of camera lenses
bellows for removing coarse dirt particles and fluff without scratching the lens
lint-free microfibre cloth approx. 14,5x14,5cm
lens cleaning pencil for safe cleaning of optical and coated glass
SCOPE OF DELIVERY
1x bellows
1x lens cleaning pen
1x microfiber cloth
300 mm adjustment shaft with flexible design for comfortable observations with the Porta II and the Mini Porta.The large adjustment knobs allow you to make smooth, fine adjustments to the axles.Also compatible with a wide range of other mounts from other manufacturers.FEATURESComfortable tracking by handLarge adjustment knobs for fine tuningDesigned for wide range of mountsLength: 300 mmDELIVERY CONTENT300 mm adjustment shaft
Each dew shield threads into the front lens cell and effectively inhibits the formation of dew on the lens surface in humid/cool observation conditions. Reduces reflections caused by scattered light incident from the side. Protects the front lens from accidental contact and scratches. FEATURES Prevents fogging of the front lens Reduces reflections caused by stray light Protects the front lens of the telescope Use in humid/cool conditions Suitable for BRESSER MCX127/MC127 telescopes Easy to screw into the telescopic tube Length: 120mm , weight: 160g SCOPE OF DELIVERY Dew cap, 1 piece
The 360 IV Lens Heater is designed to prevent camera lenses and telescopes from fogging up due to dew. It is also well suited for eyepieces.The heating element is a carbon fiber heater with a high thermal efficiency. The textile heating element provides great flexibility compared to other heating materials. The power cord (USB cable) has a particularly high flexibility to be still elastic at low temperatures. A very flexible Velcro tape allows for quick and easy attachment to and removal from the lens. The tape can be easily removed from the lens without pulling tightly. The heating tape has a very low power consumption and can be operated with a 10,000 mA battery for up to 14 hours.The Vixen Lens Heater 360 IV in detailWhen moisture in the air comes into contact with an object whose temperature is lower than the ambient temperature, small drops of water form - so-called dew condensation. Astrophotography often suffers from such lens fogging and the photo turns milky. Because the temperature and humidity change during the night and the camera becomes cooler than the ambient temperature, it is important to warm the objective's or telescope's lens by using heaters to prevent it from fogging. We recommend using the Lens Heater 360 IV when you want to do astrophotography or night photography on the coast, in the mountains or in cold regions. The heating elements are made of carbon fibers with improved heating performance, introduced for the fourth generation Vixen Lens Heater 360 IV. They efficiently keep the lens warm and fog-free with minimal power consumption. The heater temperature reaches 10 degrees Celsius above the ambient temperature (at 20 °C outside temperature and no wind). However, it varies according to influences in the environment. For power supply the lens heater is equipped with a detachable coiled cable (USB Type-C), up to 50 cm long. The 360 IV lens heater consumes only 2.5 W of power (5 V - 0.5 A). With a portable USB battery of e.g. 10,000 mA, it can operate continuously for about 14 hours (at 20 °C outdoor temperature). However, the operating time varies greatly depending on the environment and temperature. The soft and non-slip surface of the heating tape allows for easy attachment to the objective, eyepiece or telescope. The heater consists of a 30 mm wide and 600 mm long heating tape and is suitable for diameters up to 100 mm.FEATURESHeating type: carbon fiber textile heatingTemperature: 10 degrees Celsius above ambient outdoor temperature (at 20° C, no wind)Power source, power consumption: USB, 5 V, 0.5 A, 2.5 WPower cable: USB A (male)Connector: USB type C connector detachable coiled cable 20 to 50 cmOperating time: approximately 14 hours with fully charged 10,000 mAh battery (at 20 °C outdoor temperature)Recommended for lenses with a width of 30 mm and an outer diameter of 45 to 100 mmDimensions: 30 x 600 mmTotal weight: 67 gSCOPE OF DELIVERYLens Heater 360 IVUSB spiral cable
7 kg counterweight for balancing the mount with heavy telescopesSuitable for AXD, AXD2 and AXJ mountsFEATURES
Counterweight for AXD/AXJ mounts
Weight: 7 kgDELIVERY CONTENT7 kg counterweightClamp screw
With the 1.9 kg counterweight, heavier optical tubes can be balanced on many Vixen mounts.
COMPATIBLE WITH THE FOLLOWING VIXEN MOUNTS
SX
SX2
SXD
SXD2
SXP
GP2
GPD2
SCOPE OF DELIVERY
1x 1.9 kg counterweight
Additional counterweight to balance heavy accessories etc.FEATUREScolor matched with the Bresser EXOS-1/2 seriessuitable for counterbalance bar with 20mm diameterSCOPE OF DELIVERY1x counterbalance 2.0kg
Universal mounting rail for mounting a photo camera on an EQ mount with Vixen GP mount for astrophotography. The EXPLORE SCIENTIFIC camera dovetail rail is made of die-cast aluminium. The dovetail-shaped mounting rail is 45 mm wide (similar to the Vixen dovetail style) and 280 mm long. The matt black anodized surface has a laser engraved scale on one side with a fine graduation with 2 mm increments. This makes it easier to determine the center of gravity when placing the camera on the mounting head. To protect the clamping surface there is a stainless steel clamping plate on the opposite side. The dovetail plate is equipped with rubber inserts at 3 positions. This allows a secure mounting of the camera equipment and prevents unintentional slipping and twisting. The mounting rail has a screw fastening with 1/4 inch photo thread, which is suitable for almost all commercially available camera systems. The screw attachment can be used in 3 different elongated hole positions to adjust a perfect balance. In addition, an adapter from 1/4 inch to 3/8 inch photo thread is also included, so that ball heads with the larger thread version can also be used directly. The camera mounting rail weighs only 250 grams. Suitable for all EXPLORE SCIENTIFIC and BRESSER mounts and also mounts of other brands that accept the popular Vixen-GP dovetail rail. FEATURES Universal camera mounting rail Dovetail with 45 mm
width Length 280mm; weight 250 grams Suitable for EQ mounts with Vixen GP dovetail Camera mounting screw with 1/4 inch photo thread Thread adapter 1/4 inch to 3/8 inch Laser engraved scale with 2 mm fine graduation Stainless steel clamping plate Rubber inserts against slipping and twisting 3 elongated holes for mounting the camera SCOPE OF DELIVERY Camera mounting rail Mounting screw 1/4 inch Thread adapter 3/8 inch
Vixen Tube Clamp 115s for VSD90ss This high-quality tube clamp made in Japan is used to mount the VSD90ss f 5.5 astrograph. The base plate has M6 and M8 holes and can therefore be used on almost all mounts.FEATURES Supplied with various holes as standard High-quality CNC-milled aluminium tube clamp with non-slip locking screw Felt on the inside, prevents scratches on the VSD tube Threaded screw holes bottom: M8 holes x 2 (spacing 35 mm), M6 holes x 2 (spacing 35 mm) x 2 rows, 1/4-inch holes x 3 (inside 30 mm), 1/4-inch holes x 3 (interval 30 mm)
Threaded screw holes top: M8 holes x 2 (spacing 35 mm) x 2 sets, M6 holes x 2 (spacing 35 mm) x 2 rows, 1/4-inch hole x 1 in the centre, M4 holes x 2 (spacing 20 mm)
Dimensions: 162 × 71 × 155 mmSCOPE OF DELIVERY VSD tube clamp
This carrying handle is suitable for installation on BRESSER MESSIER 6, 8 and 10 inch Dobson telescopes. In combination with the optionally available prism rail (GP standard) Art. No. 4940140, these Dobson telescope tubes can be used on any telescope mount with the appropriate carrying capacity. A comfortable transport of the tube is guaranteed by the mounting in the center of gravity. The carrying handle is also suitable as a spare part for all other MESSIER telescopes.
FEATUREScarrying handle for 6 , 8 and 10 inch MESSIER Dobson telescopeswhen using telescopic tubes on EQ mountsconvenient transport due to central assemblythe assembly is carried out on the original tube ringsalso suitable as spare part for all MESSIER telescopesassembly material and tools includedlength: 190mm; Width: 30 mm; Height: 38 mmbore spacing: 160 mm; Bore diameter: 6.5 mm
SCOPE OF DELIVERYcarrying handlemounting screws (2 pieces; 1/4 inch)hex wrench tool (3/16 inch)
Keep out stray and unwanted light from your 16" Truss Tube Dobsonian telescope with a lightweight light shroud. Keeping the path dark between your secondary and primary mirror will boost image contrast and brightness bringing out more details. Constructed of opaque black nylon with excellent stretch, each end of our DOB light shroud has an elastic band to keep the shroud in place and allow for an easy fit and installation. Breathable nylon will let air circulate and yet keep dust away, keeping your optics clear and avoiding any unnecessary pressure from the breeze. A must have for the suburban observer where stray light interferes.FEATURESKeep out stray and unwanted light Boost image contrast and brightnessBringing out more details Keep dust away; avoiding pressure from the breezeBlack nylon with excellent stretch Fits for 16" Truss Tube Dobsonian telescopeSCOPE OF DELIVERY1 pc Light Shroud 16"
Functional cookies are absolutely necessary for the functionality of the web shop. These cookies assign a unique random ID to your browser so that your unhindered shopping experience can be guaranteed over several page views.
Google Pay payments
Amazon Pay
Machine identifier:
Security token to identify the machine.
Machine identifier:
Security token to identify the machine.
Stripe orig props:
Stripe referrer information.
Stripe orig props:
Stripe referrer information.
Stripe orig props:
Stripe referrer information.
Stripe orig props:
Stripe referrer information.
Private machine identifier cookie:
Security token to identify the private machine.
Private machine identifier cookie:
Security token to identify the private machine.
Private machine identifier cookie:
Security token to identify the private machine.
Private machine identifier cookie:
Security token to identify the private machine.
Private machine identifier cookie:
Security token to identify the private machine.
Private machine identifier cookie:
Security token to identify the private machine.
Site auth:
Stripe authentication cookie.
Site auth:
Stripe authentication cookie.
Site auth:
Stripe authentication cookie.
Site auth:
Stripe authentication cookie.
Site auth:
Stripe authentication cookie.
Site auth:
Stripe authentication cookie.
Site auth:
Stripe authentication cookie.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
PayPal payments
Cookie settings:
The cookie is used to store the cookie settings of the site user over several browser sessions.
Information on origin:
The cookie stores the referrer and the first page visited by the user for further use.
Payment provider (Stripe) session
Timezone:
The cookie is used to provide the system with the user's current time zone.
CAPTCHA integration
Payment provider (Stripe) session
Stripe:
The cookie is used by the payment provider to increase security when processing payments on the website.
Cache handling:
The cookie is used to differentiate the cache for different scenarios and page users.
Session:
The session cookie stores your shopping data over several page views and is therefore essential for your personal shopping experience.
Payment provider (Stripe) fraud prevention
Payment provider (Stripe) fraud prevention
CSRF token:
The CSRF token cookie contributes to your security. It strengthens the security of forms against unwanted hacker attacks.
Google Tag Manager debug mode:
Allows to run the Google Tag Manager in debug mode.
Mollie Payment:
This cookie is used to group all events generated from a unique user session across multiple checkout pages.
Activated cookies:
Saves which cookies have already been accepted by the user for the first time.
YouTube video
Location maps:
We use OpenStreetMap as tile provider to show you visually the location of our stores and merchants.
Recently viewed products:
The cookie stores the most recently viewed products in order to suggest them on further product pages.
Wishlist
Customers also viewed:
The cookie stores the most recently viewed products in order to suggest them to other customers on product pages.
Cookies used for statistics and shop performance metrics.
Conversion and usertracking via Google Tag Manager
Google Tag Manager:
Cookie from Google to control the advanced script and event handling.
Google Analytics:
Cookie from Google for website analysis. Generates statistical data about how the visitor uses the website.
Tracking cookies help the shop operator to collect and evaluate information about the behaviour of users on their website.
Matomo Tracking:
Tracking statistics for the optimization of user workflows. No personal data is stored.
Matomo:
The cookie is used to track website activity. The information collected is used for site analysis and to generate statistics.
Google Analytics:
Google Analytics is used for traffic analysis of the website. Thereby statistics about website activities can be created and read out.
Marketing cookies are used to display advertisements on the website in a targeted and individualized manner across multiple page views and browser sessions.
Google Advertising
Google Ads:
Advertising Targeting
Google AdSense:
The cookie is used by Google AdSense to promote advertising efficiency on the website.
Facebook Pixel:
The cookie is used by Facebook to display personalized advertising offers based on user behavior to users of websites that integrate Facebook services.
Google conversion tracking:
The Google Conversion Tracking Cookie is used to track conversions on the website effectively. This information is used by the site operator to target Google AdWords campaigns.
Cookies
We use cookies to personalize and improve content and services, deliver relevant advertising, and provide a secure experience. You can review your cookie controls at any time. Learn more about the use and control of cookies in our Cookie Policy.