EXPLORE SCIENTIFIC Hexafoc 2.5 adaptor for 3" 0.7x Corrector

Product Highlights

ES Hexafoc adapter for 0.7x Reducer Corrector

  • Adapts your Hexafoc-enabled telescope to the Explore Scientific 0.7x Reducer/Corrector
  • Male M76x0.75mm thread to connect the reducer
  • Female M68x0.75mm thread to connect the 2.5" HEXAFOC

£52.00*

Available

Product number: 0510366
GTIN/EAN: 4007922033419

With BRESSER, you can enjoy a smooth introduction to the vast world of astronomy. Our detailed information ("Telescope Guide") provides valuable tips for beginners—but even experienced astronomers can use the information we provide (e.g., tables for the geographical latitude of all major world cities) as a reference.

Here is the table of contents of the comprehensive BRESSER Telescope Guide:

Sky Guides by Bresser

The Sky Guide provides comprehensive information on constellations, planetary positions, and astronomical events – perfect for planning your observations and delving deeper into astronomy.
Visit the guide directly here to make the most of your observations!
Product information "EXPLORE SCIENTIFIC Hexafoc 2.5 adaptor for 3" 0.7x Corrector"
This adaptor enables you to connect the 0510360 0.7x focal reducer/field flattner to telescopes that feature the 2.5" Hexafoc. The big inner diameter of the 2.5" Hexafoc is fully utilised with this adaptor to avoid vignetting.

What's Included

1x Hexafoc 2.5 adaptor for 3" 0.7x Corrector ring
Batteries required: 0
Colour: black
Extended warranty (years): 10
Material: Plastic

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Produkt- und Sicherheitshinweise


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • General warning instructions DANGER! RISK of bodily injury! Never look directly at the sun or near the sun through this device. There is a risk of blindness! Sharp-edged and pointed tools are often used with this device. Therefore, store this device and all accessories and tools in a place inaccessible to children. There is a RISK of injury! Children may only use the device under supervision. Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a risk of suffocation! FIRE HAZARD! Do not expose the device – especially the lenses – to direct sunlight! The light concentration could cause fires. NOTE! Do not dismantle the device! In case of a defect, contact your dealer. They will contact the service center and may send the device in for repair. PRIVACY PROTECTION! The telescope is intended for private use. Respect the privacy of others – for example, do not use this device to look into apartments!

Similar products

BRESSER Universal Smartphone Adapter Deluxe
Take pictures with your smartphone through the telescope or microskope? With the Smartphone camera adapter this is now child's play! Simply screw the adapter to the eyepiece and use your smartphone as a camera with a super-telephoto / super-macrophoto lens. It lets you take pictures of distant objects or very small objects as if you were very close.The Deluxe version offers an even more comfortable and secure attachment to the eyepiece. By a rotary movement of the clamping ring 3 clamping jaws are evenly applied to the eyepiece housing and the Smartphone adapter sits firmly and centrically on the eyepiece. The fine adjustment of the height of the smartphone support allows a quick and precise adjustment of the viewing height of the smartphone camera above the eyepiece lens. Good image results are thus guaranteed.  FEATURES Take photos through the telescope Smartphone camera with super telephoto lens Fine Height adjustment of phone support Wide adjustment range for eyepiece housing diameter Fits 31.7mm (1.25") eyepieces For eyepiece housing diameters from 22-38mm SCOPE OF DELIVERY Smartphone holder deluxeLocking ring for the smartphone

£14.90*
BRESSER Universal Smartphone Adapter
Take photos with your smartphone through your spotting scope, microscope or telescope. It’s a child's play with the BRESSER Universal Smartphone Adapter. Simply attach the adapter to the eyepiece holder of your optical device and then use all together as a telephoto lens for your smartphone camera. Now you can shoot distant objects as if they were up close or take photos through a microscope.FEATURESuniversal adapter to assemble the smartphone to a spotting scope or telescopefor eyepieces up to 68 mm diameterfor smartphones with a width of 50-88mmSCOPE OF DELIVERYSmartphone adapterManual

£39.00*
BRESSER Binocular Tripod Adapter Deluxe, sturdy metal version
Sturdy metal tripod adapter for binoculars up to 3kg net weight. High-quality connecting element between tripod head and binocular bridge with a very stiff design.FEATURESTripod adapter Deluxe made of metalSuitable for almost all binoculars up to 3kg weightConnection element between tripod head and binocular bridgeVery elegant and rigid designTripod connection thread standard 1/4 inch photo threadBinocular connection thread standard 1/4 inch photo threadRubber-coated tripod support for non-slip fitLarge rubber-coated fixing screw for binocular bridgeOverall length: 100mm, weight: 100g, colour: blackSCOPE OF DELIVERYTripod Adapter Deluxe (1pc)

£19.90*
BRESSER T2 ring for Sony - E-mount
Connect your BRESSER Microscope or Telescope with a Sony System camera and take images or videos* of your observed object!T-Mounts are the connecting piece between the T2 camera adapter and the system camera. Please read the instruction manual of your camera to find out which T-Mount you need, look into the instruction manual of your camera.The adapter will provide the necessary distance extension between the flange focal length of 18mm for E-Mount and 55mm for T2. The overall length is 37mm.For Sony NEX or ILCE cameras with E-Mount bajonet (e.g. Sony Alpha 6000, Sony A7S / A7R)SCOPE OF DELIVERYT2-Ring für Sony E-Mount camerasFor Sony NEX, ILCE Cameras (e.g. A7S, A7R)

£27.99*
BRESSER Adapter 2" on T2
Enables you to connect a camera to telescopes that accept 2" barrel eyepieces. You will need a T2-ring for your special camera type also. The very special feature of this adaptor is the very short mechanical design (2.0mm) which enables the camera use also on telescopes with a short focal range. This adapter is also prepared to use with 2" filters.   

£23.00*
%
BRESSER Smartphone Holder for Telescopes (1.25")
Take pictures with your smartphone through the telescope! With the Smartphone camera adapter this is now child's play! Simply screw the adapter to the eyepiece and use your smartphone as a camera with a super-telephoto lens. It lets you take pictures of distant objects as if you were very close. FEATURES Take photos through the telescope Smartphone camera with super telephoto lens Fits 31.7mm (1.25") eyepieces For eyepiece housing diameters from 32-34mm SCOPE OF DELIVERY Smartphone holder Locking ring for the smartphone

£8.00* £9.90* (19.19% saved)
BRESSER Telescope Camera Adapter (1.25")
The BRESSER Telescope Camera Adapter is the connecting piece between your 35 mm DSLR camera and the telescope. The connection to your camera can be achieved with the fitting T2-mount (T2-mount optional). For the focal fotography, you need to unscrew the bottom part of the adapter and attach the camera with the fitting T2-mount directly to the push-on contact. The eyepiece projection is possible when you put an eyepiece into the adapter and tighten the knurled screw. After that, you have to attach the T2-mount and the camera and you are ready to go.FEATURESEyepiece connection diameter: 31.7 mm (1.25")Eyepiece total diameter max. 35mm  SCOPE OF DELIVERYTelescope Camera Adapter 1.25"

£39.00*
BRESSER T2 Extension Tube Set
Set of 5 extension tubes with T2 thread on both sides for exact distances and secure hold of cameras for astrophotography. Also comes with SC to T2 thread adapter.In astrophotography, most cameras are connected to a telescope via a T2 thread (M42x0.75), the most popular international standard. However, in many cases, T2 and T2-ring adapters for connecting telescope focusers to a camera are not sufficient, as specific distances must also be observed. This is especially important when using correctors, reducers or flatteners. This extension tube set, which consists of 5 mm, 7.5 mm, 10 mm, 15 mm and 30 mm tubes, will allow you to obtain almost any distance using the corresponding combination. Each tube has a T2 interior thread on one side and a T2 exterior thread on the other side.Most telescopes either include a T2 thread adapter, or the eyepiece can be used with a simple T2 thread adapter with a 2” plug-in diameter (item no. 0510365).However, Maksutov-Cassegrain, Schmidt-Cassegrain, ACF or Ritchey–Chrétien telescopes may use a so-called SC thread. To allow you to use this extension tube set with these telescopes, the set also includes an SD to T2 thread adapter.FEATURES5 T2 tubes with lengths from 5 mm to 30 mmCombination of tubes allows you to obtain distances of 5 mm to 67.5 mmFor exact camera distances in astrophotographyDELIVERY CONTENT5x T2 extension tubes (5/7.5/10/15/30 mm)1x SC to T2 thread adapter

£29.00*
BRESSER Extension Tube 37,5 mm for 2.5" HEXAFOC
Are you having trouble focusing your eyepiece or camera? Then use this 37.5 mm extension sleeve to increase the distance between the 2.5 inch HEXAFOC eyepiece extension and the eyepiece or camera. The extension sleeve has an M68x0.75 mm internal and external thread and can therefore be screwed directly onto the HEXAFOC draw tube. SPECIFICATIONSIncreases the distance to the eyepiece/cameraSuitable for 2.5 inch HEXAFOCOptical length: 37,5 mmInternal and external thread: M68x0,75 mmInside black matt coatedMaterial: aluminium, black anodizedSCOPE OF DELIVERYExtension sleeve 37,5 mm (1 piece)

£19.90*
BRESSER Extension Tube 25 mm for 2.5" HEXAFOC
Are you having trouble focusing your eyepiece or camera? Then use this BRESSER 25 mm extension sleeve to increase the distance between the 2.5 inch HEXAFOC eyepiece extension and the eyepiece or camera. The extension sleeve has an M68x0.75 mm internal and external thread and can therefore be screwed directly onto the HEXAFOC draw tube.SPECIFICATIONSIncreases the distance to the eyepiece/camera Suitable for 2.5 inch HEXAFOC Optical length: 25 mm Internal and external thread: M68x0,75 mmInside black matt coated Material: aluminium, black anodized SCOPE OF DELIVERYExtension sleeve 25 mm (1 piece)

£17.00*
BRESSER Camera-Adapter M35/T2 for MC/MCX100/127
Camera-Adapter M35/T2 for Bresser MC/MCX-100 and MC/MCX-127 Maksutov telescopes The BRESSER Camera-Adapter M35/T2 for MC/MCX100/127 is principally designed to connect a DSLR camera (with appropriate manufacturer-specific T2 T-ring, available separately) to the Bresser MC-100 and MC-127 Maksutov telescopes which have a built-in M35 connecting thread. You can also use wider-bodied astronomical cameras (non-c-mount), which have T2 threads built into their bodies, as standard with this camera adapter. This adapter can be separated into two different lengths of 30mm and 80mm (which both truncate in a T2/M42 thread). The use of these different lengths of extension tube allows the user to vary the projection of image on to a camera chip and get the best framing for the size of object being imaged. Please note: an extra camera specific T2-adapter ring (Canon, Nikon, Sony, etc.) is necessary to connect a DSLR.  Many of these are available from us and you are welcome to contact us for advice if unsure which of these to pick.WHAT'S INCLUDED Camera-Adapter with M35x1,0mm to M42x0.75mm (T2) thread

£46.00*
EXPLORE SCIENTIFIC Camera-Ring M48x0.75 for Canon EOS
Camera specific bayonet adapter (camera ring) for Canon EOS DSLR with M48x0.75 mm internal thread for astrophotography. By using the large thread M48x0.75 mm, the vignetting of e.g. a DSLR full format sensor is effectively avoided. Compared to the small T2 thread M42x0.75, this adapter has a free inner diameter of 47.5 mm. This camera ring is made of matt black anodised aluminium and weighs only 40 grams. The light path (overall length) is 10.0 mm. FEATURES Camera-specific bayonet adapter Canon EOS Large female thread M48x0.75 mm Free inner diameter of 47,5mm No vignetting for full format sensors Light path (overall length) is 10.0 mm Made of matt black anodized aluminium Weight only 40 grams SCOPE OF DELIVERY Camera ring for Canon EOS (1 piece)

£23.00*

Customers also bought

EXPLORE SCIENTIFIC 2" Variable Polarizing Filter
Universally usable variable polarizing filter with a  2" filter thread.This variable polarizing filter allows for a continuous adjustment of the image brightness. This is very helpful to level strong differences in contrast of different observation objects individually. Particularly for lunar and planetary observations but also for solar observations this filter prevents an outshining of details.Solar observations ONLY together with an adequate solar filter !!! Particularly when a Herschel wedge is used and with large objective lens apertures the use of the variable polarizing filter can reduce the brightness of the observation object to a confortable level. The large adjustment range of 40% to 1% light transmission and the neutral grey filter effect create a comfortable and unadulterated image.The handling is very simple. The desired filtering level is set by turning the two sides of the housing against each other.A 2.0" filter thread on both sides (female/male) allow for the simultaneous use of additional colour filters.FEATURESvariable polarizing filterindividually adjustable image brightnessmade from high-quality optical glassblack anodized aluminium housing2.0" filter thread on both sidesSCOPE OF DELIVERYpolarizing filterprotective box

£74.00*
EXPLORE SCIENTIFIC 1.25" UHC Nebula Filter
One of the most important obstacles for the exploration of the night sky is the brightening of the night sky by artificial lights, such as streetlights. The night sky is not really dark in the vicinity of towns or cities, which reduces the visibility of objects beyond the solar systems enormously. Depending on the type of the celestial object it is possible to increase the contrast dramatically by blocking the annoying artificial light. The EXPLORE SCIENTIFIC UHC filter uses a characteristic property of the so called emission nebulae. Those objects glow in special colours, their emission lines. Those emission lines are linked to chemical elements - in this case hydrogen at 486nm and 656nm, plus oxygen at 496nm and 501nm. The Explore Scientific UHC nebula filter blocks all other colours (and thereby nearly all of the artificial light) and only the emission line of the hydrogen and oxygen can pass the filter. The result is astonishing: suddenly nebulae are visible at locations that were completely empty without filters. In suburban skies for example the Owl-nebula M97, the Veil-nebula NGC6992 or even the bright Dumbell-nebula M27 are not clearly visible. By using this filter you can see the nebulae and their structures without problems. A must for every visual observer. The EXPLORE SCIENTIFIC nebula filters come with a individual test certificate - your guarantee to receive a premium filter.FEATURESenables the observation of emission nebulaeblocks almost the entire artificial lightonly the two emission lines of hydrogen and oxygen passes the filterWHAT'S INCLUDED1x 1.25" UHC nebula filter

£58.00*
BRESSER Extension Tube 25 mm for 2.5" HEXAFOC
Are you having trouble focusing your eyepiece or camera? Then use this BRESSER 25 mm extension sleeve to increase the distance between the 2.5 inch HEXAFOC eyepiece extension and the eyepiece or camera. The extension sleeve has an M68x0.75 mm internal and external thread and can therefore be screwed directly onto the HEXAFOC draw tube.SPECIFICATIONSIncreases the distance to the eyepiece/camera Suitable for 2.5 inch HEXAFOC Optical length: 25 mm Internal and external thread: M68x0,75 mmInside black matt coated Material: aluminium, black anodized SCOPE OF DELIVERYExtension sleeve 25 mm (1 piece)

£17.00*
EXPLORE SCIENTIFIC 82° LER Eyepiece 6,5mm Ar (1,25")
The visual effect of these new 6,5mm 82° LER eyepieces with their long eye-relief and their 82° apparent field is truly a full-immersion experience.  Your eye is relaxed, allowing you to easily use the averted vision technique to study faint details across a huge field-of-view. The 82° Series eyepieces come with foldable eyecups make handling and using in the field easy. As experienced astronomers know, eye comfort is critical when trying to observe at the visual limits of the telescope. To keep internal reflections to a minimum, all internal surfaces of the eyepiece barrel are flat black, as well as the edges of the lenses themselves to minimize the scattering of light within the lenses themselves.These eyepieces are the choice for observers wearing glasses - with excellent performance and durability. The patented EMD-coating produces high contrast images and prevents reflexes and ghosting. The argon purging effectively prevents internal fogging, and you don´t have to deal with dirt, fungus or cleansing fluids getting between the lenses. The eyepieces are sealed - this makes sure you will be able to enjoy these eyepieces for many years to come.Comfort, Quality, Value. The Explore Scientific 82° LER Series Most short focal length eyepieces are excellent flat-field multi-element oculars that can transform your visual astronomy experience.  These extreme wide field eyepieces are optimized to produce high contrast and high resolution characteristics.SPECIFICATIONSLarge eye distance, large field and great image sharpnessExcellent viewing position for people with glassesExcellent field sharpness even with fast optics82° apparent field of viewArgon-purging prevents internal fogging, the sealing facilitates cleaningPatented EMD"-coating to maximize contrastBlackened lens edges to avoid reflexesAll eyepieces of this series are parfocalStainless steel barrel with conical security cutoffDust covers and protective bag includedSCOPE OF DELIVERY82° EyepieceDust coversProtective bag

£164.00*
EXPLORE SCIENTIFIC Star Diagonal Mirror 2" 99%
Diagonals provide a user-friendly observing position for refractors and Cassegrain telescopes. The Explore Scientific 2" Diagonal Mirror here is precision machined from aluminium and contains carbon fibre parts. The large eyepiece port diameter of 2"(50.8mm) is ideal for modern wide angle eyepieces and a non-marring brass compression ring holds the eyepiece in place securely. The dielectric coating of the mirror delivers 99% reflectivity and is very durable against environmental influences. A step-down reducer to 1.25"(31.8mm) is included, so all of your 1.25" eyepieces and accessories can also be used.FEATURES Star diagonal mirror for focuser with 2" barrel High quality flat mirror Dielectrical mirror coating delivers 99% reflectivity Very durable against environmental influences Brass eyepiece clamping ring Housing completely made of metal Dust caps included WHAT'S INCLUDEDdiagonal mirror dust caps

£185.00*
EXPLORE SCIENTIFIC 1.25" Variable Polarizing Filter
Universally usable variable polarizing filter with a  1.25" filter thread.This variable polarizing filter allows for a continuous adjustment of the image brightness. This is very helpful to level strong differences in contrast of different observation objects individually. Particularly for lunar and planetary observations but also for solar observations this filter prevents an outshining of details.Solar observations ONLY together with an adequate solar filter !!! Particularly when a Herschel wedge is used and with large objective lens apertures the use of the variable polarizing filter can reduce the brightness of the observation object to a confortable level. The large adjustment range of 40% to 1% light transmission and the neutral grey filter effect create a comfortable and unadulterated image.The handling is very simple. The desired filtering level is set by turning the two sides of the housing against each other.A 1.25" filter thread on both sides (female/male) allow for the simultaneous use of additional colour filters.FEATURESvariable polarizing filterindividually adjustable image brightnessmade from high-quality optical glassblack anodized aluminium housing1.25" filter thread on both sidesSCOPE OF DELIVERYpolarizing filterprotective box

£58.00*

Customers also viewed

EXPLORE SCIENTIFIC Adaptor 3" 0.7x Corrector to M68 x 1.0mm
Connects accessories with the M68x1 male thread to the imaging side of the 0.7x Reducer/Corrector 0510360.

£65.00*
%
EXPLORE SCIENTIFIC Special T2-Ring Canon 1,5mm light-path
This special T2-Ring for Canon DSLR Camera offers a extreme short light-path of only 1,5mm. Regular T2-Rings needs a light-path of about 11-12mm and if you have a close backfocus situation these certain millimeters are making the difference to reach the focus.  

£33.00* £41.00* (19.51% saved)