EXPLORE SCIENTIFIC 2" Adaptor for 3" Corrector

The EXPLORE SCIENTIFIC 3" 0.7x Reducer/corrector, reduces a compatible telescope's focal length by a factor of 0.7x (for around f/8) and 0.8x (for around f/10) respectively. The reducer/corrector not only reduces the focal length but also flattens the field. Although originally developed for the Explore Scientific ED-APOs 127mm and 152mm, the reducer can be used with many systems - for example with the Explore Scientific ED-APOs 102mm and 165mm (please note, this will not work on the Explore Scientific 80mm ED Apo refractors though). With certain telescope focal lengths, a slight restriction of the correction at the edge of the image field can be expected when using full-frame sensors. This unit comes with 3" barrel adaptor for direct focuser thread M54x0.75 (the standard focuser thread of the Explore Scientific Essential series of ED Apos) and T2 camera adaptor. This reducer/corrector features a free aperture of 65mm, so that it can be used even with cameras that have a large sensor - if the telescope allows for this. Note: As previously mentioned, this Reducer/corrector comes with a screw on ring, which fits the standard focuser thread of the Explore Scientific Essential series of ED Apos. For telescopes which are equipped with the 2.5" HEX Focuser, the optional screw-on adapter part no: 0510366 is needed. Other telescopes, not in the Explore Scientific range, with standard 2" push-fit focusers will need the Explore Scientific 2" Adaptor for 3" Corrector - part no: 0510364 to get this reducer correctly fitted. SPECIFICATIONS Reduces the focal length by 0.7x at f/8 Flattens the field for astrophotography Developed for ED127 und ED152 APO telescopes Also fits Explore Scientific ED102 and ED165 telescopes - and others Free aperture: 65mm Inner thread for telescope adaption: M76x0.75mm Outer thread for camera adaption: M72x0.75mm 3" focuser barrel adaptor included Adaptor for Explore Scientific focuser M54x0.75mm included T2 camera adaptor M42x0.75mm included Diameter: 78.5mm; length: 100mm Length without adaptors: 52mm Weight without adaptors: 530g What's Included Reducer/Flattener 3" focuser barrel adaptor Adaptor for Focuser M54x0.75mm T2 camera adaptor M42x0.75mm Dust caps

Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMSTwo rubber O-rings are installed into the Pressure-Tuner of Lunt Solar Systems solar telescopes to seal the air-pressure tuning system. Over time, the rubber of this O-rings can age and become porous, whereby the air-pressure can then no longer be maintained. When this happens, a old O-ring can be replaced by this spare part. The replacement is simple and can be done by the user. Installation instructions can be found here under the tab "Manuals" as a PDF file for download.Please be sure to note:Depending on the production series, the diameters of the Pressure-Tuner pistons can vary slightly. There are pistons for O-rings with 32mm inner diameter and 40mm outer diameter, and pistons for O-rings with 34mm inner diameter and 42mm outer diameter. Please check the diameter of your old O-rings, this spare part is an O-ring with 34mm inner diameter and 42mm outer diameter.If you need the smaller O-ring with 32mm inner diameter and 40mm outer diameter, this is the spare part with item number 0558330.The LS50THa telescopes have Pressure-Tuners with smaller diameters, for these you will need replacement O-rings with item number 0558320.After replacing a O-ring, the piston and cylinder of the Pressure-Tuner can be re-greased with grease available under item number 0558350.FEATURESInner diameter: 34mmOuter diameter: 42mmCannot be used separately, only as a replacement part on the Pressure-Tuner of MT and THa telescopes from Lunt Solar Systems.It does not matter what blocking-filter is at the MT or THa telescope.SCOPE OF DELIVERYSpare part one O-ring with 34mm inner diameter and 42mm outer diameter for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems

This Herschel wedge is designed for superior White-Light solar observing and imaging. It can be used with refracting telescopes up to 102mm aperture, with 1.25'' focuser. This complete system comes with installed ND3.0 filter.Herschel Wedges are used to observe the sun in White Light. Around 95% of the Sun's light is suppressed by the wedge's ceramic prism. The remaining sun light is dimmed further by a factory-installed ND3.0 grey filter. Lunt Solar Systems Herschel wedges are installed in a fully closed housing with integrated heat trap. No stray light can escape from this, therefore it is very safe method of observing our nearest star.The difference between Herschel-wedges and normal front mounted filters is that the filtering takes place just before the eyepiece or camera. This provides better contrast and sharpness of the solar image - with more surface detail visible as a result.  Furthermore, a Herschel wedge is inherently safer than at a front mounted filter. A Herschel wedge can not rip or become punctured like a foil filter can be and it cannot become detached from the telescope objective accidentally.Only for use with refractor telescopes up to 102mm aperture:Because the full energy and heat of the sun inside the telescope, we advise solely using refractors for Herschel-wedge use. The refractor must not have corrector lenses at the back. Optical elements like corrector lenses, or secondary mirrors of reflecting telescopes, could suffer from thermal build-up by concentrated solar energy and could be permanently damaged.Tuning the brightness:Because the Herschel-wedge produces polarised light, you can use a normal polarising filter at the eyepiece, or camera-adapter. By turning the polarising filter the image brightness can be varied to the user's liking.This additional Polarising filter is not included. We recommend the BRESSER 1.25'' polarising filter, no: 4946464.FEATURESFor refractor telescopes up to 102mm apertureConnection to telescope: 1.25''Connection to eyepiece: 1.25''90° housing like star-diagonalEspecially high-quality optical surfaces for very good contrastFully closed housing with integrated heat trapNo stray light escaping - therefore it is very safeThe needed ND3.0 filter is fix installedWHAT'S INCLUDEDHerschel-wedge for 1.25'' focuserIntegrated ND3.0 filterTransport caseInstruction manual

2" slide-tube, adapts LUNT Solar Systems 1.25" blocking-filter in star diagonal to telescopes with 2" focuser.FEATURESThread to blocking-filter: T2Length 2" slide-tube: 80 mmSCOPE OF DELIVERYAdapter 1.25" LUNT Blocking Filter to 2" focuser(Blocking-filter not included)

Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMSFor example, if the O-rings have been changed on a Pressure-Tuner of a Lunt Solar Systems H-alpha solar telescope, the Pressure-Tuner can be re-greased with this grease. The grease can be applied to the piston with the O-rings and to the threads of the brass cylinder on the Pressure-Tuner. It keeps the Pressure-Tuner running smoothly and seals it.Please note:Do not use too much grease inside the brass cylinder. The grease must not get into the air passage at the bottom of the brass cylinder, otherwise the Etalon could be damaged in the worst case.FEATURESLithium grease with Teflon contentVery good sealing propertiesHigh adhesion and good corrosion protectionTemperature stable from -20 to +120° CelsiusConstant viscosity during temperature fluctuationsSCOPE OF DELIVERYSpare part: Grease for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems

Adapter T2 to 2", takes for example 2" eyepieces to Lunt Solar Systems blocking-filters.This adapter offers a T2 female thread at the telescope-side, and a 2" connection at the eyepiece-side.For example you want to use your 2" eyepieces at Lunt Solar Systems telescopes or filters? All you need is this adapter. Simply remove the 1.25" eyepiece tube from your blocking-filter, and thread on this 2" adapter. It takes T2 threading to a 2" eyepiece tube.You can use 2" eyepieces with this adapter at:• LUNT H-alpha telescopes (not at LS35THa!)• the blocking-filters of LUNT H-alpha filter systems• LUNT Ca-K modules• all telescopes/adapter with T2 male threadTechnical data:• Thread at telescope-side: T2 female thread• Eyepiece connection: 2"Delivered by order:• Adapter T2 to 2"(Blocking Filter not included)