EXPLORE SCIENTIFIC 100° Ar Eyepiece 9mm (2")

Product Highlights

9mm high-resolution argon-purged high-end eyepiece with 100° apparent field

  • Huge apparent field of view not only gave the observer a panoramic visual experience, but they relax the eye so the observer could pay attention to subtle details for extended periods.
  • Each 100° Series Argon-Purged Waterproof eyepiece is internally sealed and purged with inert, dry argon gas.
  • This also maximizes the life of the internal coatings.
  • Every 100° eyepiece is tested by submerging them down to 1 meter of water for 30 minutes.
  • All 100° Series eyepieces are fully multi-coated and edge-blackened to produce maximum contrast.
  • Dimensions and specifications of all eyepieces can be found in the pdf in the folder "media"

£369.00*

Privacy
Product number: 0218409
GTIN/EAN: 4007922197517

With BRESSER, you can enjoy a smooth introduction to the vast world of astronomy. Our detailed information ("Telescope Guide") provides valuable tips for beginners—but even experienced astronomers can use the information we provide (e.g., tables for the geographical latitude of all major world cities) as a reference.

Here is the table of contents of the comprehensive BRESSER Telescope Guide:

Sky Guides by Bresser

The Sky Guide provides comprehensive information on constellations, planetary positions, and astronomical events – perfect for planning your observations and delving deeper into astronomy.
Visit the guide directly here to make the most of your observations!
Product information "EXPLORE SCIENTIFIC 100° Ar Eyepiece 9mm (2")"
These eyepieces with their huge apparent field of view not only gave the observer a panoramic visual experience, but they relax the eye so the observer could pay attention to subtle details for extended periods. These ultra-wide angle eyepieces played a critical role in the military for aiming at targets, and their long eye-relief counterparts helped reduce eye injury from recoil.
Each 100° Series Argon-Purged Waterproof eyepiece is internally sealed and purged with inert, dry argon gas to prevent internal fogging, to halt the intrusion of fine particulates and fungus. This also maximizes the life of the internal coatings.
To make sure, every 100° eyepiece is tested by submerging them down to 1 meter of water for 30 minutes.
All 100° Series eyepieces are fully multi-coated and edge-blackened to produce maximum contrast.
Colour: black
Eyecups: Rubber eyecups, foldable
Lenses/Groups [Eyepiece]: 9/6
Material: Stainless steel

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Accessories

BRESSER BR-LP15 Cleaning kit - 3 parts
With the 3-piece lens cleaning set you not only clean camera or binocular lenses, but also spectacles glasses and displays and screens of smartphones, laptops, tablets, etc. thoroughly and safely. When cleaning high quality optical lenses, you have to be very careful. After all, it would be very annoying to successfully remove the dust but leave a scratch behind. With the lens cleaning pen you can safely clean optical and coated glass. With the brush on one side you can remove coarser dirt before polishing the lenses with the other side. Just blow away fluff with the bellows. FEATURES complete set for safe cleaning of camera lenses bellows for removing coarse dirt particles and fluff without scratching the lens lint-free microfibre cloth approx. 14,5x14,5cm lens cleaning pencil for safe cleaning of optical and coated glass SCOPE OF DELIVERY 1x bellows 1x lens cleaning pen 1x microfiber cloth

£4.90*

Similar products

BRESSER Universal Smartphone Adapter Deluxe
Take pictures with your smartphone through the telescope or microskope? With the Smartphone camera adapter this is now child's play! Simply screw the adapter to the eyepiece and use your smartphone as a camera with a super-telephoto / super-macrophoto lens. It lets you take pictures of distant objects or very small objects as if you were very close.The Deluxe version offers an even more comfortable and secure attachment to the eyepiece. By a rotary movement of the clamping ring 3 clamping jaws are evenly applied to the eyepiece housing and the Smartphone adapter sits firmly and centrically on the eyepiece. The fine adjustment of the height of the smartphone support allows a quick and precise adjustment of the viewing height of the smartphone camera above the eyepiece lens. Good image results are thus guaranteed.  FEATURES Take photos through the telescope Smartphone camera with super telephoto lens Fine Height adjustment of phone support Wide adjustment range for eyepiece housing diameter Fits 31.7mm (1.25") eyepieces For eyepiece housing diameters from 22-38mm SCOPE OF DELIVERY Smartphone holder deluxeLocking ring for the smartphone

£14.90*
BRESSER WiFi Eyepice Camera with Display
Whether you’re exploring the night sky, the microscopic world, or wildlife, the BRESSER WiFi Eyepiece Camera with Display lets you capture every highlight with impressive photos and videos. Thanks to its adjustable clamp, it quickly attaches to any eyepiece with a diameter of 30 to 65 mm. Once mounted, you can view your adventures in real time on the integrated 1.47-inch (3.7 cm) screen. From there, just switch to your mobile device for seamless control via the intuitive app. Capture every detail with the eyepiece camera With 2K video quality and pin-sharp photos, capture whatever crosses your path. Save your media in the standard formats MP4 and JPG on a MicroSD card (not included). You can also download your images and videos to the app’s album for easy access anytime. Advanced features for perfect shots The BRESSER WiFi Eyepiece Camera offers various options to suit different viewing scenarios. Choose between videos with or without sound to match your subject. The loop recording feature automatically captures clips in 1, 3, or 5-minute intervals, giving you plenty of time to record and review. To share your discoveries with family and friends, simply use the app to share your photos and videos. Look forward to capturing detailed shots through telescopes, spotting scopes, binoculars, microscopes, and more – all with the BRESSER WiFi Eyepiece Camera with Display! FEATURES Universal WiFi eyepiece camera for telescopes, binoculars, microscopes, spotting scopes, and more Integrated 1.47-inch (3.7 cm) display Video resolution: 2K (30 fps) Photo resolution: 1,920 x 1,080 px CMOS sensor resolution: 4 MP File formats: MP4 (video), JPG (photo) Videos with or without sound Loop recording option: 1 / 3 / 5 min App (Android / iOS) with user-friendly video and photo editing functions Maximum recording time with WiFi: 130 minutes Compatible with eyepiece diameters from 30 – 65 mm Storage medium: MicroSD card up to 128 GB (not included) SCOPE OF DELIVERY Eyepiece camera USB-C cable User manual

£91.00*
BRESSER MikrOkular Full HD eyepiece camera
Save pictures and videos from your microscope or telescope directly in Full HD resolution on your PC. The BRESSER MikrOkular Full HD is an eyepiece camera that can be used directly instead of the eyepiece of your telescope or microscope. Adapters for various devices (all common eyepiece dimensions from different manufacturers) and multilingual recording software for Windows are already included in the scope of delivery. With this camera you can document your microscope or telescope observation or share it with others. Ideal for hobby, school, study and work. The camera can take pictures of the moon and the bright planets on the telescope. In microscopy, the camera is mainly used for shooting in brightfield and incident light. FEATURESmetal housing, mini USB socketresolution 1920 x 1080 Pixel, Full HDPixel size: 3x3 µm, sensor size: 5.86 x 3.28 mm23,2mm barrel, integrated UV/IR blocking filter30mm; 30,5mm adapter for various microscopes and telescopes included31,7mm (1,25") adapter for telescopes includes with thread for 1,25" filtersmultilingual recording software for Windowsimage format jpg, bmp, tif, pngvideo format avi SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 CPU from the 2nd generation orAMD FX or Ryzen CPUinternet connection for software downloadUSB 2.0 SCOPE OF DELIVERYcamera module incl. dust capUSB-cableCamLabLite-Software as a download link, language versions German, English, French, Turkish, Russian, Polish, Indonesian, ChineseUsers Guide included in the software (German, English)Adapters 30mm, 30,5mm, 31,7mm (1,25”)

£64.99*
Explore Scientific ASTRO R-LITE red light Flashlight
The ASTRO R-LITE red light flashlight is the ideal companion at night to read star charts or make adjustments to the equipment without losing the dark adaptation of the eyes. The ASTRO R-LITE offers 3 functions: Continuous light bright / Continuous light dark / Flashing. The large diffusing lens results in a very large and evenly illuminated light cone, which can also be adjusted by a sliding mechanism. By using a power-saving LED lamp, the battery life (1 x AA-LR6) is up to 100 hours. Of course, the robust lamp housing made of aluminium is splash-proof according to IPX4 and therefore particularly well suited for outdoor applications. The side cutouts on the front of the ASTRO R-LITE provide a 360° signal function. The 50 cm long carrying strap with quick coupling and an extra belt clip included in the scope of delivery ensure that the flashlight is always quickly at hand. The ASTRO R-LITE should not be missing in any equipment. FEATURES ASTRO R-LITE Red Light Flashlight Reading star maps at night Dark adaptation of the eyes is retained Continuous light bright / Continuous light dark / Flashing 360° signal function Large diffusing lens produces a uniformly illuminated light cone Carrying strap and belt clip included Battery life up to 100 hours - Battery (1 x AA-LR6) Splash-proof according to IPX4Robust lamp housing made of aluminiumSCOPE OF DELIVERYASTRO R-LITE Red Light Flashlight Carrying strap Belt clip Battery (1 x AA-LR6)

£16.00*
BRESSER Universal Smartphone Adapter
Take photos with your smartphone through your spotting scope, microscope or telescope. It’s a child's play with the BRESSER Universal Smartphone Adapter. Simply attach the adapter to the eyepiece holder of your optical device and then use all together as a telephoto lens for your smartphone camera. Now you can shoot distant objects as if they were up close or take photos through a microscope.FEATURESuniversal adapter to assemble the smartphone to a spotting scope or telescopefor eyepieces up to 68 mm diameterfor smartphones with a width of 50-88mmSCOPE OF DELIVERYSmartphone adapterManual

£39.00*
OLIVIA VERLAG - Julius forscht im Weltall (GERMAN)
Please note: This book is written in German language

£16.05*
Silicone Eye Cup Diameter 32mm for ES Eyepieces
Silicone Eyecup 32mm Diameter for ES Eyepieces Category: Spare Part suitable for Eyepieces Description: The soft replacement eyecup with a 32mm diameter provides increased comfort during observation. Suitable as a spare part for EXPLORE SCIENTIFIC eyepieces. Ideal for spectacle wearers. It enhances observation comfort and reduces stray light. Easy to mount and maintain. Durable and easy to clean silicone material.

£5.00*
BRESSER 10mm Plössl eyepiece 31,7mm/1,25"
BRESSER 10mm Plössl Eyepiece 1,25" (31,7mm) Since years a well known and approved Plössl eyepiece. Ideal to improve the performance of your telescopes for a low budget price. All the BRESSER Plössl eyepieces provide sharp and high-contrast images because of the 4-lens design. All lenses have fully-multicoated surfaces which prevents reflections efficiently. Every eyepiece is equipped with a foldable rubber eyecup to avoid straylight from the sides and the inner eyepiece shaft is carefully blackened as well. Housing and eyepiece shaft are completely made from metal - no plastic is used. Filter thread for use with colour- and nebular filters is also available. All these Plössl eyepieces offer a much better image quality than all the very simple made Kellner and Huygens eyepieces. FEATURES Focal length: 10 mm Field of view: 50° Lens-Design: 4 lenses in 2 groups , fully-multicoated Housing material: completely made from metal Rubber eyecup: YES, foldable Filter thread: YES Storage: Twist-pack SCOPE OF DELIVERY BRESSER Plössl eyepiece with rubber eyecup Twist-pack

£29.00*
OCULUM VERLAG - Fernrohr-Führerschein in 4 Schritten (GERMAN)
Please note that this astronomy book for beginners is only available in German.

£21.29*
BRESSER Barlow Lens 2x 31.8mm/1.25"
With the usage of barlow lenses, you can extend the equivalent focal length of telescopes and hence increase the magnification of your observed targets. Subsequently, you can use lower power eyepieces in Barlows to act as much more powerful eyepieces, but retain the larger ocular size and more comfortable viewing that comes with lower power eyepiece designs.Due to their two lens design, these Barlow lenses provide a brilliant image quality for the whole visual field and are suitable for observations and photography.  The black coloured Barlow element cell in this BRESSER Barlow Lens 2x 31.8mm/1.25," can be unscrewed and has the same thread as 1.25" filters, allowing it to be mounted in 1.25" eyepieces, t-adapters and other accessories, giving you flexibility of use and the ability to vary magnification in different accessories.  For instance, the black Barlow cell screwed into the average length nosepiece of a standard push fit t-adapter will give around 1.6x magnification on an attached DSLR.  This can be very useful when trying to get to photographic focus with some Newtonians and Solar Telescopes, which lack the necessary amount of in focus travel to get a camera to a prime focus position.FEATURESsuitable for observations and photographydoubling of the focal lengthtwo lens designfully multi-coatedWHAT'S INCLUDEDBarlow lens (1pc)

£29.90*
BRESSER 5mm Plössl eyepiece 31,7mm/1,25"
BRESSER 5mm Plössl Eyepiece 1,25" (31,7mm) Since years a well known and approved Plössl eyepiece. Ideal to improve the performance of your telescopes for a low budget price. All the BRESSER Plössl eyepieces provide sharp and high-contrast images because of the 4-lens design. All lenses have fully-multicoated surfaces which prevents reflections efficiently. Every eyepiece is equipped with a foldable rubber eyecup to avoid straylight from the sides and the inner eyepiece shaft is carefully blackened as well. Housing and eyepiece shaft are completely made from metal - no plastic is used. Filter thread for use with colour- and nebular filters is also available. All these Plössl eyepieces offer a much better image quality than all the very simple made Kellner and Huygens eyepieces. FEATURES Focal length: 5 mm Field of view: 50° Lens-Design: 4 lenses in 2 groups , fully-multicoated Housing material: completely made from metal Rubber eyecup: YES, foldable Filter thread: YES Storage: Twist-pack SCOPE OF DELIVERY BRESSER Plössl eyepiece with rubber eyecup Twist-pack

£27.00*
BRESSER T2 ring Canon EOS
T-Mounts are the connecting piece between the camera adapter and the SLR camera. Please read the instruction manual of your camera to find out which T-Mount you need, look into the instruction manual of your camera. Connect your BRESSER Microscope or Telescope with a Canon EOS SLR camera and take images or videos of your observed object!FEATURESConnecting piece between the camera adapter and Canon EOS SLR cameraHigh-quality and precise workmanship made of metalA corresponding camera adapter is neededSCOPE OF DELIVERYT2 Ring Canon EOS

£24.99*

Customers also viewed

EXPLORE SCIENTIFIC 100° Ar Eyepiece 5,5mm (2")
These eyepieces with their huge apparent field of view not only gave the observer a panoramic visual experience, but they relax the eye so the observer could pay attention to subtle details for extended periods. These ultra-wide angle eyepieces played a critical role in the military for aiming at targets, and their long eye-relief counterparts helped reduce eye injury from recoil.Each 100° Series Argon-Purged Waterproof eyepiece is internally sealed and purged with inert, dry argon gas to prevent internal fogging, to halt the intrusion of fine particulates and fungus. This also maximizes the life of the internal coatings.To make sure, every 100° eyepiece is tested by submerging them down to 1 meter of water for 30 minutes. All 100° Series eyepieces are fully multi-coated and edge-blackened to produce maximum contrast.

£345.00*
EXPLORE SCIENTIFIC Ultra Light 20'' Dobson 500mm f/3.6 GENERATION II
Ultra Light Dobsonian 500mm GENERATION II - telescope mechanics handcrafted in HUNGARY and GERMANY No telescope type has influenced amateur astronomy as radically as the dobsonian telescope. Before the introduction of this telescope type by John Dobson the vast majority of amateur telescopes were small inadequate refractors on shaky mounts - just good enough to show the polar regions on mars or the rings of Saturn. Bigger telescopes, like the Schmidt-Cassegrain telescopes, were restricted to the relatively small group of amateurs that could afford them.The brilliant combination of simple - but effective - mechanics and the largest aperture available led to a worldwide triumph of this concept. No other telescope type offers you so much light for your money as a good dobson. We have taken the motto held together by gravity and driven by yoghurt power and offer a modern version of the classic - designed by amateur astronomers for amateur astronomers. Despite its large aperture the telescope can be transported easily even in small cars and is assembled within minutes without tools. The construction was optimized for maximum rigidity with a minimum of mass. The combination of big altitude wheels and a optimized aluminium-sandwich construction allows for small movements even at high magnifications. The focus position is already positioned to accept our coma-corrector (part No. 0510330) . The ideal workhorse for the deep-sky enthusiast. A telescope with 500mm aperture gathers more than 5100-times more light than the naked eye. Details on planetary surfaces stand out even to unexperienced observers, and countless deep-sky objects show details and some color. Bright globular clusters are resolved down to the core and the view of the lunar terminator will provide a unforgettable experience. The fast 20’’ f3.6 main mirror as well as the large 120mm secondary mirror are made of high quality quartz material, so the cooling time is reduced to a minimum and the Dobson is quickly ready for use. Every main mirror is delivered with an individual optical test certificate, which guarantees the highest capacity. A laser engraved center mark of the main mirror allows easy adjustment. The optical surface has a high-quality aluminum silvering with 94% reflectivity and an extremely resistant quartz protection layer. The mirror overcomes frequently occurring dew fogging and cleanups without any damages and guarantees a long service life. A complete redesign of this Dobson was necessary to ensure the significantly increased requirements to stiffness and load bearing capacity of the optical components. All connections of the tube structure were made in the TIG welding process and no rivets and screws were used. This has made it possible for us to produce this 20’’ light weight Dobson so unbelievably stiff in spite of the low weight - a noticeably good quality which is searching for its match. The production of almost all mechanical components is carried out by our partners in Hungary and the final assembly of the optics and subsequent quality control takes place in Rhede, Germany. The equipment details of the smaller Dobson models, which have been popular for years, have been taken over and even extended considerably. First of all, of course, the very good decomposability and transportability should be mentioned. Set-up and dismantling can be carried out without tools. The main and secondary mirrors are adjustable during the observation and only two adjusting screws have to be moved. Thanks to the use of precision ball-heads in the main mirror cell and a precision hinge for secondary mirror suppport, the adjustment is absolutely easy and guarantees excellent stability. All connecting parts of the tube trusses now consist of CNC machined aluminum and are attached by stainless steel dowel screws. The secondary mirror can now also be adjusted by the adjusting screws in the direction of the optical axis. The tried and tested 2.5’’ HEXAFOC focuser with 1:10 fine adjustment has been used for years - this allows vignetting-free observation despite the fast aperture ratio. A second 40° displaced installed mounting plate with a viewfinder shoe allows the rotation of the tube top in combination with a favorable position of the viewfinder tube or the mounting of an additional TELRAD viewfinder. The 6 supporting feet underneath the rockerbox offer a perfect stability and guarantee a smooth tracking in azimuth. Four smaller fans are installed in the side of the mirror box as well as a large fan is installed under the main mirror. This allows an even quicker adaptation to the ambient temperature and reduces the tube seeing (boundary layer removal). The lateral altitude wheels can now be stowed comfortably in the foam layers of the mirror box. Last but not least another gimmick: The optical tube and the mirror cell are designed to use also on heavy equatorial mounts. Dimensions for mobile use: DIMS total: 680x680x1790mm; Rockerbox 678mmx678mmx347mm; Mirrorbox 590mmx590mmx361mm; Trusses approx. 1084mm; Truss diameter: 25mm; Eyepiece height while pointing at zenith approximately 1,63m; 20’’ Total net weight: 53 kg; 20’’ Mirror Box + Altitude wheels: 35,8kg; 20’’ Secondary Cage: 3,8kg; Rockerbox: 10,6 kg; 20’’ 4 Truss pairs: 2,8kg; 20’’ Primary mirror: 20kg SPECIFICATIONS Truss-Dobsonian telescope in full Aluminium construction Handcrafted in HUNGARY and GERMANY Fast 20’’ f3.6 optics with 1800mm focal length Large 120mm secondary mirror (short axis) Quarz primary- and secondary mirror set Laser engraved central mark on primary mirror Eyepiece height while pointing at zenith approximately 1,63m Full welded rigid telescope structure - no rivets and no screws Telescope tube and rockerbox powder-coated Collimation while observing with the delivered tooling DeLuxe 2,5’’ HEXAFOC focuser with 1:10 gear-reduction 8x50 finder scope with red illuminated reticle Slider bearings made from TEFLON und GRP for smooth and precise movement Improved primary mirror cell with completely redesigned mechanics High precision hinge system for secondary mirror holder Secondary mirror holder with adjustment mechnism along the optical axis 6 larger feet to improve stability Counter-weights (4 x 1.0 kg) included 2 universal finder slots to enable an easy finder position Quick-lock fasteners with new springloaded design for comfortable use Large powder-coated yellow altitude wheels for smooth tracking Altitude wheels can be stored in the mirror box 5 cooling fans are speeding up the cool-down time SCOPE OF DELIVERY Truss Dobsonian Telescope Individual optical test report for primary mirror 8x50 finder with red illuminated reticle Stray light shield for secondary cage Primary mirror collimation tool Battery compartment with bag for fans Extension tube for focuser Reducer 2’’/1.25’’ Manual SHIPPING DIMENSION - truck shipment only in order to guarantee a save transport: BOX1: 600x600x380 approx. 44 kg ; BOX2: 690x690x330 approx. 17 kg ; BOX3: 150x150x1150 approx. 4 kg

£7,479.00*
LUNT LS100FHa/B600d2 H-alpha solar filter
100mm H-alpha solar filter system with B600 blocking filter, for front mounting at telescopes with 2" focuser, and up to 540mm focal length.The LS100FHa H-alpha Etalon filter system with 100mm aperture for use on any refractor and many other telescopes. Because the LS100FHa has an estimated bandwidth of <0.7 Angstrom it is capable to providing high contrast views of both solar surface and edge detail (prominences).The system includes the B600 blocking filter, which is usable for telescopes up to 540mm focal length. Larger blocking filters suitable for longer focal length are also optional available. The blocking filter is installed in a 90° star diagonal for 2" focuser. This diagonal is equipped with a reception for 1.25" eyepieces and a T2 camera connection.Adding an additional available double-stack Etalon system will reduce the bandwidth to ~<0.5 Angstrom.FEATURESAperture: 100 mmBandwidth: <0.7 AngstromTuning: tiltable EtalonHousing diameter: 162 mmLength: 101 mmWeight: 2.75 kgFront thread: M120x1.5 female threadRear thread: M120x1.5 male threadBlocking filter: B600 in diagonal for 2" focuserMaximum focal length of telescope: 540 mmSCOPE OF DELIVERYLS100FHa solar filterB600 Blocking Filter (for 2" focuser) in star-diagonalTransport caseInstruction manual

£11,290.00*