BRESSER WF 10x/22 Crosshair Micrometer Eyepiece for several Bresser Science Microscopes (30)

Microscope slides with a micrometer scale are used for the calibration for measurements.They are used in combination with a micrometer eyepiece or a measurement software (for cameras) in order to measure preparations. The broad scale is suitable for lower magnifications, the fine scale for higher magnifications.

The BRESSER MikroCam II 20 MP 1’’ microscope camera is the professional solution when it comes to microscope imaging. This camera has a big 1’’ sensor (image area 13.06 x 8.8 mm); this is the biggest sensor of the MikroCam camera range. With this camera it is possible to document roughly the same field of view as it can be seen through the eyepiece (e.g. when using a 10x / 22mm). Other models will cover only 50% or less of the eyepiece field of view. The Sony IMX183 CMOS-sensor is very sensitive and has extremely low image noise, which makes this camera especially suitable for contrast methods like dark field or phase contrast. The MikroCam Lab II software comes with a wide range of professional functions, e.g. measurements in live view (calibration slide needed), mosaic, Focus-Stacking (for improved depth of field). All automatic functions (exposure time, gain, white balance etc) can be adjusted manually as well. Due to the big sensor size the camera will not work with all microscope models. It might be possible that the optics will not illuminate the full sensor, so you experience vignetting. Usually this can be resolved by using the optional 1x optical adapter (item no. 5914001). Please note that this camera model is not suitable for the stereo microscope BRESSER Science ETD-201. It will cover only a small field of view. SPECIFICATIONSRobust metal housingProfessional software suite including measurements, dark and bright field calibration, focus stacking, mosaic and moreSave images and video, including time lapsecompatible to most microscopesHigh speed USB 3.0 connection for high frame rateModern Sony® IMX183 Sensor 13,06 x 8,8 mm (1'')1/4’’ connectorC-Mount adapter, compatible with c-mount lenses SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 CPU from the 6nd generation orAMD Ryzen CPUOptical Disk Drive or internet connection for software downloadUSB 3.0, 3.1 SCOPE OF DELIVERYcamera bodyUSB 3.0 cable23.2 mm, 30 mm und 30.5 mm adapterSoftware for imaging and processing (Windows compatible)

Slides and cover glasses are an indispensable accessory which has also impact on the image quality. For most biological microscopes, the cover glass thickness is an important optical parameter, which is therefore included in the optical design and, if so, printed on the sleeve of every objective. You can usually see the number 0.17 which is the thickness in millimeters. For demanding applications in the laboratory, or for microphotography, using cover glasses with the desired thickness and high quality is necessary.The cover glasses included in the set are made of Boro 3.3 glass and are standardized to a thickness of 0.16-0.19mm. So they match the desired 0.17mm really good and give the best possible image quality. These Boro 3.3 cover glasses are pure white, without streaks and are pre-cleaned and ready to use. They are also especially suitable for fluorescence microscopy.The slides are made of soda lime glass, and have ground edges for safe handling. They have a matte field for writing on both sides (top and bottom). Slides and cover glasses are packed separately and in a vacuum sealed bag, containing moisture absorbent. They can be stored for a long time without loss of quality from hydrolysis and are easy to take out.

The BRESSER 0.5x reduction lens is used to change the image field of a microscope camera. Itallows to zoom in or out. The brightness becomes more intensive, to reduce the exposure time.For trinocular microscopes the adapter allows to adjust the focus to get the same focus for every eyepiece. It is compatible with 23.2 mm eyepiece holders. This adapter is designed for cameras with sensor sizes from 1/2 " or 1/3". The connection is made via 1 " C-mount thread. FEATURES For cameras with 1" c-mount thread To adjust the image field For 23.2 mm eyepiece holders SCOPE OF DELIVERYReduction lens 0.5x variable

This Full HD eyepiece camera lets you capture photos and videos directly through your microscope. The MikrOkular LF fits either in place of an eyepiece or into the microscope’s third tube. With the included adapter rings, it can be used with almost any microscope as an eyepiece replacement. If your microscope has a built-in C-mount camera connection, you’ll need the Microscope Photo Adapter 30.5mm / C-Mount (Article No.: 5942030). The downloadable Windows software is user-friendly, making it ideal even for beginners. Along with image and video capture, it also includes a measurement function. Whether for hobbies, school, studies, or professional use, it’s a great tool for documentation. Compared to the MikrOkular Full HD, the integrated reduction optics provide around seven times the image field area. The camera's field of view is approximately the same as that of a 10x eyepiece of a student microscope. FEATURES Metal housing, USB-C port Integrated reduction optics for a wider field of view Resolution: 1920 x 1080 pixels, Full HD Frame rate: up to 25 fps Pixel size: 3x3 µm, sensor size: 5.86 x 3.28 mm 23.2 mm insertion diameter, built-in UV/IR cut filter Includes 30 mm and 30.5 mm microscope adapters Multilingual imaging software for Windows Image formats: JPG, TIF, PNG Video format: MP4 SYSTEM REQUIREMENTS Windows 10 or 11 Intel i3, i5, i7, or i9 processor (6th generation or later), or AMD FX / Ryzen processor (1st generation or later) Internet connection required for software download USB 2.0 or higher SCOPE OF DELIVERY Camera module with dust cover USB-C to USB-A cable CamLabLite software (download link), available in German, English, French, Spanish, Catalan, Italian, Turkish, Polish, Portuguese, and Bulgarian 30 mm and 30.5 mm adapters