Skip to main content Skip to search Skip to main navigation
Please note that our minimum order value is ÂŁ50

BRESSER Weather Station 5-in-1, black

Help & Service for your product

Here you will find quick help, answers to frequently asked questions, and direct access to support.

Service Portal

Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.

Service Portal

Sensor Form

In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.

Sensor Form

Ratgeber & Tipps

FAQ - Frequently Asked Questions

The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
  1. Remove all batteries from the base station and the outdoor sensor.
  2. Wait at least 3–10 minutes.
  3. Insert the batteries into the base station.
  4. Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.

Tips:
  • If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
  • Do not place the base station near other electronic devices (this may interfere with reception).
  • If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
  • Briefly press the reset button on the back with a pen
  • If necessary, place the station closer to a window, as reception inside buildings may be limited

Product and safety instructions


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • Fire risk: The nozzle and heated bed of the 3D printer can reach extremely high temperatures during operation. Avoid direct contact with these parts to prevent burns.
  • Risk of inhaling fumes: Some filaments may release fumes when heated. Always use the filament in a well-ventilated area. If irritation occurs, stop printing and immediately improve ventilation.
  • Fire risk: Store the filament away from open flames, heat sources, and direct sunlight. DO NOT exceed the recommended printing temperature, as this may cause overheating or fire.
  • Suffocation risk: Keep filament spools and small packaging materials out of the reach of children to avoid suffocation risk.
  • Proper use: This filament is only intended for 3D printing purposes. Do NOT use it for applications involving food, medical devices, or products intended for human consumption, unless explicitly stated as food-safe.
  • Mechanical risk: Keep hands, hair, and loose clothing away from moving parts during operation to avoid entanglement or injury.
  • Store the filament in a cool, dry place. Use airtight containers or resealable bags with desiccants to prevent moisture absorption, which could affect the print quality.
  • Disposal: Dispose of used or damaged filament in accordance with local regulations. Do not burn the filament, as toxic fumes may be released.
  • Allergy warning: Some filaments may contain materials that can trigger allergic reactions. If skin irritation or other symptoms occur, discontinue use immediately and consult a doctor if necessary.
  • Failure to comply with these safety regulations may result in personal injury, damage to the printer, or poor print quality. Always read the entire manual before use.
Skip product gallery

Compatible Sensors

%
BRESSER 5-in-1 Outdoor Sensor
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station. WARNING! One or more of the listed weather stations have a lot number restriction, so please also check the lot number of your device.1520015201156597002510 (from lot number 1181632)7002511 (from lot number 1199241)7002512 (from lot number 1233002)700251370025257002550CM30007002550GYE0007002550MGU0007002550QT50007002571700258070025817002585700259070026107002620908050096025107002550000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000 This high-quality replacement part will quickly get your weather station back in working order. FEATURES Replacement wireless sensor, transmits data to the WiFi colour weather centre Measures wind speed, wind direction, humidity, external temperature and precipitation Transmission frequency: 868 MHz Power supply: 3x AA batteries (not included) SCOPE OF DELIVERY Multifunctional external sensor Mounting materials No base station included Instruction manual

Available

£74.73* £74.99* (0.35% saved)
Skip product gallery

Compatible Base Stations

%
BRESSER Additional / Spare Base Station for Weather Station 7002550QT5000
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station. WARNING! One or more of the listed weather stations have a lot number restriction, so please also check the lot number of your device.15200152017002510 (from lot number 1181632)7002511 (from lot number 1199241)7002512 (from lot number 1233002)700251370025257002550CM30007002550GYE0007002550MGU0007002550QT500070025717002580700258170025857002590908050096025107002550000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000 Base station for 5-in-1 multisensor and other weather stations Indoor temperature (°C/°F) and humidity Graphical weather trend display (12 hours) Beaufort index (scale for measuring wind speed) Rainfall with history (day/week/month) Air pressure with history (24 hours) Heat index Dewpoint Radio-controlled time and date settings Phases of the moon Alarm function Ice/frost warning Min./max. memory (up to 24 hours) SCOPE OF DELIVERY Base station Stand Power adapter

Available

£91.00* £99.00* (8.08% saved)
%
BRESSER Additional / Spare Base Station for Weather Station 7002513
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station. WARNING! One or more of the listed weather stations have a lot number restriction, so please also check the lot number of your device.15200152017002510 (from lot number 1181632)7002511 (from lot number 1199241)7002512 (from lot number 1233002)700251370025257002550CM30007002550GYE0007002550MGU0007002550QT500070025717002580700258170025857002590908050096025107002550000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000 Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES Indoor temperature (°C/°F) and humidity with comfort indicator Displays the outdoor temperature (°C/ °F) and humidity Displays the wind direction and speed Displays the graphical weather trend (12 hours) Beaufort scale display (scale for measuring wind speed) Rainfall with history (day/week/month) Air pressure with history (24 hours) Heat index Dewpoint Radio-controlled time and date settings Phases of the moon Alarm function with ice/frost warning Maximum/minimum reading alarm (High/low) Min./max. memory (up to 24 hours) LED backlight, amber-coloured Power supply: 3x AA batteries (not included) SCOPE OF DELIVERY Base station with stand External sensor not included! Instruction manual

Currently unavailable

£74.73* £74.99* (0.35% saved)
%
BRESSER Additional / Spare Base Station for Weather Station 7002520CM3000
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station. WARNING! One or more of the listed weather stations have a lot number restriction, so please also check the lot number of your device.7002510 (up to lot number 1181631)7002511 (up to lot number 1199240)7002512 (up to lot number 1233001)7002520CM30007002520000000 Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES Base station for 5-in-1 multi-sensor Indoor temperature (°C/°F) and humidity Graphical weather trend display (12 hours) Beaufort index (scale for measuring wind speed) Rainfall with history (day/week/month) Air pressure with history (24 hours) Heat index Dewpoint Radio-controlled time and date settings Display changes colour based on outdoor temperature Alarm function Ice/frost warning Min./max. memory (up to 24 hours) SCOPE OF DELIVERY Base station Stand Power adapter

Available

£93.65* £93.99* (0.36% saved)
BRESSER Additional / Replacement Base Station for Weather Station 7002511 from LOT no. 1199241
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station. WARNING! One or more of the listed weather stations have a lot number restriction, so please also check the lot number of your device.15200152017002510 (from lot number 1181632)7002511 (from lot number 1199241)7002512 (from lot number 1233002)700251370025257002550CM30007002550GYE0007002550MGU0007002550QT500070025717002580700258170025857002590908050096025107002550000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000 Want to share your weather data with your immediate neighbours? Or do you need a replacement base station because your device didn’t survive the last house move or a wild game of tag with the kids? Whether as an extension or a spare part – get all the functions of your existing weather station with item number 7002511 back on screen in no time with this base station. Smart extension for early risers: the additional base station In the living room, the whole family keeps an eye on weather conditions and ambient climate with the weather station. But because the device really shows its strengths at the start of the day, it’s worth having an extra console in the bedroom. That way, you’ll start every morning on time and dressed for the weather. Whether as a replacement or an add-on – enjoy all the functions of your existing weather station with this compatible base station. FEATURES Displays readings from a compatible 5-in-1 multi outdoor sensor Indoor temperature (°C/°F) and humidity Outdoor temperature (°C/°F) and humidity display Wind direction and speed display Graphical 12-hour weather trend display Beaufort scale (classification of wind speeds) Displays Precipitation amount with history (day/week/month) Air pressure with 24-hour history Heat index Dew point Radio-controlled time and date setting Moon phases Alarm function Ice/frost warning Min./max. value memory (up to 24 hours) Amber LED backlight SCOPE OF DELIVERY Base station No outdoor sensor included! Instruction manual

Available

£64.00*
%
BRESSER Additional / Spare Base Station for Weather Station 7002510 from LOT no. 1181632
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station. WARNING! One or more of the listed weather stations have a lot number restriction, so please also check the lot number of your device.15200152017002510 (from lot number 1181632)7002511 (from lot number 1199241)7002512 (from lot number 1233002)700251370025257002550CM30007002550GYE0007002550MGU0007002550QT500070025717002580700258170025857002590908050096025107002550000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000 The base station from the 5-in-1 weather station – now also individually – for an overview of measured values in multiple rooms. A base station in the living room and one in the bedroom, giving you an ideal overview whichever room you’re in. The clearly structured display on the base station also displays a range of history data. It enables internal storage and evaluation of the measured data over a 24-hour period. Using the measured data, the weather station calculates a very reliable local weather trend forecast for the next 12 hours, which is indicated on the display by six graphical symbols. There is a programmable alarm function for maximum and minimum values, which can emit an acoustic alarm and light signal if either value is reached. A special frost/ice warning alarm can also be configured for outdoor temperatures from -3 °C. A poor indoor climate can pose a particular health risk for children and the elderly. The BRESSER 5-in-1 weather station offers a smart feature to help tackle this. The indoor climate indicator uses symbols to visualise the current status of the indoor climate. In addition, the BRESSER 5-in-1 weather station also offers radio-controlled time and date setting (DCF time signal). The current central European time (CET) and date with day will be displayed within a few minutes of the device being switched on. For the moonstruck, the display also indicates the various phases of the moon. A wake function with snooze function is also included. FEATURES Base station for 5-in-1 multisensor and other weather stations Indoor temperature (°C/°F) and humidity Graphical weather trend display (12 hours) Beaufort index (scale for measuring wind speed) Rainfall with history (day/week/month) Air pressure with history (24 hours) Heat index Dewpoint Radio-controlled time and date settings Phases of the moon Alarm function Ice/frost warning Min/max memory (up to 24 hours) LED backlight, amber-coloured with removable stand and suspension device Requires 3x AA batteries WHAT’S INCLUDED Base station Stand

Currently unavailable

£74.73* £74.99* (0.35% saved)
%
BRESSER Additional / Spare Base Station for Weather Station 7002580
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station. WARNING! One or more of the listed weather stations have a lot number restriction, so please also check the lot number of your device.15200152017002510 (from lot number 1181632)7002511 (from lot number 1199241)7002512 (from lot number 1233002)700251370025257002550CM30007002550GYE0007002550MGU0007002550QT500070025717002580700258170025857002590908050096025107002550000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000 Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES Base station for 5-in-1 multi-sensor and other weather stations Indoor temperature (°C/°F) and humidity Displays the graphical weather trend (12 hours) Beaufort index (scale for measuring wind speed) Rainfall with history (day/week/month) Air pressure with history (24 hours) Heat index Dewpoint Radio-controlled time and date settings Phases of the moon Alarm function Ice/frost warning Min./max. memory (up to 24 hours) SCOPE OF DELIVERY Base station Stand Power adapter

Currently unavailable

£103.11* £103.99* (0.85% saved)
BRESSER Additional / Spare Base Station for Weather Station 7002550CM3000
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station. WARNING! One or more of the listed weather stations have a lot number restriction, so please also check the lot number of your device.15200152017002510 (from lot number 1181632)7002511 (from lot number 1199241)7002512 (from lot number 1233002)700251370025257002550CM30007002550GYE0007002550MGU0007002550QT500070025717002580700258170025857002590908050096025107002550000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000 Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES Base station for 5-in-1 multisensor and other weather stations Indoor temperature (°C/°F) and humidity Graphical weather trend display (12 hours) Beaufort index (scale for measuring wind speed) Rainfall with history (day/week/month) Air pressure with history (24 hours) Heat index Dewpoint Radio-controlled time and date settings Phases of the moon Alarm function Ice/frost warning Min./max. memory (up to 24 hours) SCOPE OF DELIVERY Base station Stand Power adapter

Available

£91.00*
BRESSER Additional / Spare Base Station for Weather Station 7002581
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station. WARNING! One or more of the listed weather stations have a lot number restriction, so please also check the lot number of your device.15200152017002510 (from lot number 1181632)7002511 (from lot number 1199241)7002512 (from lot number 1233002)700251370025257002550CM30007002550GYE0007002550MGU0007002550QT500070025717002580700258170025857002590908050096025107002550000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000 Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES Base station for 5-in-1 multi-sensor and other weather centres Indoor temperature (°C/°F) and humidity Displays the graphical weather trend (12 hours) Beaufort index (scale for measuring wind speed) Rainfall with history (day/week/month) Air pressure with history (24 hours) Heat index Dewpoint Radio-controlled time and date settings Phases of the moon Alarm function Ice/frost warning Min./max. memory (up to 24 hours) SCOPE OF DELIVERY Base station Stand Power adapter

Currently unavailable

£103.11*
%
BRESSER Additional / Spare Base Station for Weather Station 7002525
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station. WARNING! One or more of the listed weather stations have a lot number restriction, so please also check the lot number of your device.15200152017002510 (from lot number 1181632)7002511 (from lot number 1199241)7002512 (from lot number 1233002)700251370025257002550CM30007002550GYE0007002550MGU0007002550QT500070025717002580700258170025857002590908050096025107002550000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000 Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES Receives weather data from the 5-in-1 external sensor Large colour display and elegant design Graphical weather trend (12 hours) Measures the indoor temperature (°C/°F), humidity and air pressure Displays the outdoor temperature (°C/ °F) and humidity Displays the wind speed and wind direction Beaufort scale display (scale for measuring wind speed) Precipitation display with history (day/week/month) Historical bar graph display for precipitation (last 5 days) and change in air pressure (last 1, 3, 6,12 and 24 hours) Indoor climate indicator Maximum and minimum value alarm Min./max. memory (up to 24 hours) Weather index display: Feels like (perceived temperature), dew point, wind chill factor, heat index and Beaufort index Radio-controlled time and date settings(PLEASE SET HOUR OFFSET TO -1 IN THE TIME SETTING MENU IF IN THE UK, IRELAND OR PORTUGAL TO RECEIVE THE CORRECT TIME FOR THESE AREAS) Moon phase display Alarm function with snooze button and ice warning function 5 languages for day of the week display (EN, DE, FR, ES, IT) Ambient light sensor for automatic dimming of the LED backlight Power supply: Power adapter, CR2032 back-up battery (not included) SCOPE OF DELIVERY Base station with standPower adapterInstruction manual

Available

£49.90* £61.00* (18.2% saved)
BRESSER Additional / Spare Base Station for Weather Station 7002550GYE000
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station. WARNING! One or more of the listed weather stations have a lot number restriction, so please also check the lot number of your device.15200152017002510 (from lot number 1181632)7002511 (from lot number 1199241)7002512 (from lot number 1233002)700251370025257002550CM30007002550GYE0007002550MGU0007002550QT500070025717002580700258170025857002590908050096025107002550000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000 Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES Base station for 5-in-1 multisensor and other weather stations Indoor temperature (°C/°F) and humidity Graphical weather trend display (12 hours) Beaufort index (scale for measuring wind speed) Rainfall with history (day/week/month) Air pressure with history (24 hours) Heat index Dewpoint Radio-controlled time and date settings Phases of the moon Alarm function Ice/frost warning Min./max. memory (up to 24 hours) SCOPE OF DELIVERY Base station Stand Power adapter

Available

£91.00*
Skip product gallery

Spare Parts

Grey Wind Vane
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:1519915200152011650970025107002511700251270025137002520CM300070025257002550CM30007002550GYE0007002550MGU0007002550QT50007002571700258070025817002582700258570025867002590700261070026207003100CM30007003100GYE0007003100HZI0007003100QT50007003150700330070034007003600CM30007003600GYE0007003600QT5000700440678025207802580780315078033009080500908060096025107002520000000700255000000070031000000007003600000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000

Available

£15.99*
Black Wind Cups
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:15199152001520116268165097002510700251170025127002513700252570025317002550CM30007002550GYE0007002550MGU0007002550QT50007002571700258070025817002582700258570025867002590700261070026207003100CM30007003100GYE0007003100HZI0007003100QT50007003150700330070034007003600CM30007003600GYE0007003600QT500070044067802520780258078031507803300908050090806009602510700255000000070031000000007003600000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000

Available

£15.99*
Skip product gallery

Customers also bought

%
BRESSER Quadro Individuo S Thermo-Hygrometer
The BRESSER Quadro Individuo S Thermo-Hygrometer gives you complete control over your home's climate. This clever device displays readings from 4 different locations on one screen, so you can monitor conditions throughout your house at a glance. Beyond basic temperature and humidity monitoring, it comes packed with handy extras like an alarm clock and memory storage for peak readings. Complete Home Climate Monitoring Made Simple The day begins in the cosily heated living room, the laptop awaits in the cooler study, and in the evening you wind down in the perfectly balanced bedroom - this system has you covered. The built-in temperature and humidity meters in the base unit work alongside 3 wireless sensors to give you a complete picture of your home's climate. You can label each sensor with custom room names, so you'll instantly know if the nursery's getting chilly or rather the basement's bang on target. Clever Features That Make a DifferenceWinter heating drying out your home? Bathroom getting a bit too steamy? The memory function tracks maximum and minimum readings, helping you spot overly dry air or potential damp issues in time. Start your mornings right with the built-in alarm and snooze function. Even better, you'll never need to adjust the time manually – it automatically stays accurate via radio signal. Wireless Sensors That Go the Distance Got a workshop in the garage or a spare room in the loft? These wireless sensors work from up to 80 metres away, bringing readings from every corner of your home straight to your bedside table. They're built tough too – IP44 water-resistant rating means they'll happily sit in steamy bathrooms, busy kitchens, or even outside in the garden. Each sensor has its own display as well, so you can check readings on the spot. Take control of your home's comfort with the BRESSER Quadro Individuo S Thermo-Hygrometer. FEATURES BASE STATION Built-in thermometer and hygrometer for local readings Displays data from all 3 wireless sensors Custom room naming for each sensor channel Temperature readings with trend arrows (°C/°F switchable) Humidity readings with trend indicators (%) Records and stores maximum/minimum values DCF Radio-controlled time display (12/24-hour format, weekdays in 7 languages)***Alarm clock with snooze function Runs on 2x AAA 1.5V batteries (included) Battery level indicators for base unit and all sensors ***PLEASE NOTE: This device receives the DCF time signal (Central European Time). However, you can easily adjust the time display to different time zones using the offset function. FEATURES SENSOR Set of 3 thermo-hygro sensors included Measures temperature and humidity (indoor/outdoor use) Individual display on each sensor for local readings Transmission range: up to 80 metres Water-resistant rating: IP44 (splash-proof) Dimensions: 71 x 65 x 23 mm / Weight: 44g Each sensor runs on 2x AAA 1.5V batteries (included) SCOPE OF DELIVERY Base station unit 3x wireless thermo-hygro sensors 8x AAA/LR03 1.5V batteries Instruction manual

Available

£29.95* £33.95* (11.78% saved)
%
BRESSER WiFi Eyepiece Camera with Display
Whether you’re exploring the night sky, the microscopic world, or wildlife, the BRESSER WiFi Eyepiece Camera with Display lets you capture every highlight with impressive photos and videos. Thanks to its adjustable clamp, it quickly attaches to any eyepiece with a diameter of 30 to 65 mm. Once mounted, you can view your adventures in real time on the integrated 1.47-inch (3.7 cm) screen. From there, just switch to your mobile device for seamless control via the intuitive app. Capture every detail with the eyepiece camera With 1.920 x 1.080 px (Full HD) video quality and pin-sharp photos, capture whatever crosses your path. Save your media in the standard formats MP4 and JPG on a MicroSD card (not included). You can also download your images and videos to the app’s album for easy access anytime. Advanced features for perfect shots The BRESSER WiFi Eyepiece Camera offers various options to suit different viewing scenarios. Choose between videos with or without sound to match your subject. The loop recording feature automatically captures clips in 1, 3, or 5-minute intervals, giving you plenty of time to record and review. To share your discoveries with family and friends, simply use the app to share your photos and videos. Look forward to capturing detailed shots through telescopes, spotting scopes, binoculars, microscopes, and more – all with the BRESSER WiFi Eyepiece Camera with Display! FEATURES Universal WiFi eyepiece camera for telescopes, binoculars, microscopes, spotting scopes, and more Integrated 1.47-inch (3.7 cm) display Video resolution: 1.920 x 1.080 px (Full HD) Photo resolution: 1,920 x 1,080 px CMOS sensor resolution: 4 MP File formats: MP4 (video), JPG (photo) Videos with or without sound Loop recording option: 1 / 3 / 5 min App (Android / iOS) with user-friendly video and photo editing functions Maximum recording time with WiFi: 130 minutes Compatible with eyepiece diameters from 30 – 65 mm Storage medium: MicroSD card up to 128 GB (32 GB card included) SCOPE OF DELIVERY Eyepiece camera 32 GB microSD cardUSB-C cable User manual

Available

£81.00* £109.20* (25.82% saved)
%
BRESSER Quadro NV Thermo-Hygrometer white
Sleek design and detailed overview: With the BRESSER Quadro NV Thermo-Hygrometer and its 3 wireless sensors, you can keep track of temperature and humidity in 4 different locations. Versatile and reliable: the 3 outdoor thermo-hygrometer sensors Living room, bedroom, bathroom, and more: The 3 compact sensors can be placed anywhere quickly and measure temperature and humidity reliably. Once connected to the base station, the data is displayed on the clear screen from up to 80 m away. Quick checks on site: The temperature and humidity meters feature an integrated screen, so you can read the values directly and use the sensors as a thermometer and hygrometer even without the base station. Perfect indoor climate with a smile For our well-being and health, temperature and humidity need to be just right. That’s why, alongside the precise readings for each location, you’ll find a comfort indicator as a smiley face. This way, a smiling, neutral, or sad face gives you instant feedback on the current indoor climate. Perfect for preventing mould and excessively dry air! Thermo-Hygrometer with high/low value alarm Is the nursery warm enough? What’s the humidity like in the basement? Easy to spot with the built-in high/low humidity and temperature alarms based on your chosen threshold values. The device also stores the lowest and highest readings in the min./max. memory – ideal for regular indoor climate checks. Enjoy a comfortable climate in 4 rooms using the readings from the BRESSER Quadro NV Thermo-Hygrometer! FEATURES BASE STATION Built-in thermometer and hygrometer for on-site measurements Displays measurement data from the 3 thermo-hygro wireless sensors Temperature display with trend in °C/°F Humidity display in % Comfort indicator for indoor climate as a smiley face Min./Max. value memory for temperature and humidity High/low value alarm for temperature and humidity Battery-operated: 2 AAA batteries (not included) FEATURES OUTDOOR SENSOR Includes 3 thermo-hygro wireless sensors Measures temperature and humidity (indoor or outdoor) With display for direct reading of measurement data Range: up to 80 m IP protection class: IP44 Dimensions: 71 x 65 x 23 mm / Weight: 44 g Battery-operated: each 2x 1.5-V AAA batteries (not included) SCOPE OF DELIVERY Base station 3x wireless sensors Instruction manual

Available

£29.95* £33.95* (11.78% saved)
%
BRESSER MikrOkular Full HD eyepiece camera
Save pictures and videos from your microscope or telescope directly in Full HD resolution on your PC. The BRESSER MikrOkular Full HD is an eyepiece camera that can be used directly instead of the eyepiece of your telescope or microscope. Adapters for various devices (all common eyepiece dimensions from different manufacturers) and multilingual recording software for Windows are already included in the scope of delivery. With this camera you can document your microscope or telescope observation or share it with others. Ideal for hobby, school, study and work. The camera can take pictures of the moon and the bright planets on the telescope. In microscopy, the camera is mainly used for shooting in brightfield and incident light. FEATURESmetal housing, mini USB socketresolution 1920 x 1080 Pixel, Full HDPixel size: 3x3 µm, sensor size: 5.86 x 3.28 mm23,2mm barrel, integrated UV/IR blocking filter30mm; 30,5mm adapter for various microscopes and telescopes included31,7mm (1,25") adapter for telescopes includes with thread for 1,25" filtersmultilingual recording software for Windowsimage format jpg, tif, pngvideo format mp4 SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 CPU from the 2nd generation orAMD FX or Ryzen CPUinternet connection for software downloadUSB 2.0 SCOPE OF DELIVERYcamera module incl. dust capUSB-cableCamLabLite-Software as a download link, language versions German, English, French, Turkish, Russian, Polish, Indonesian, ChineseUsers Guide included in the software (German, English)Adapters 30mm, 30,5mm, 31,7mm (1,25”)

Available

£61.49* £64.99* (5.39% saved)
Skip product gallery

Customers also viewed

%
BRESSER Wi-Fi Colour Weather Station with 5-in-1 Professional Sensor
FEATURES5.7'' colorful display for time and detailed weather informationWIFI connection with internet time synchronizationReceives weather data from 5in1 profi sensor and from wireless thermo-hygro sensor via 868 MHz transmissionPublish local weather station data on weather underground and weather cloudDisplays time, calendar, weekday and moon phaseAlarm clockIce pre-alert functionIndoor temperature (°C/°F) and humidity with comfort indicationOutdoor/Channel’s temperature (°C/°F) and humidity readingsGust or average wind speedWind direction (16-direction indicator)Rain rate (hourly, daily, weekly, monthly, total rainfall)Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy)Barometric pressure in relative or absolute readings (hPa, inHg, mmHg)Smart outdoor “Feels like” sensation readingWeather index for outdoor feels like, dew-point, Wind chill, Heat indexMax/Min memory records and past 24 hours (hourly record)Hi/Lo alert with flash LED indicatorWeather calibration (on set-up UI)3-mode brightness: Hi / Lo / Off7 languages for weekday (EN/ DE/ FR/ ES/ IT/ NL/ RU)Support firmware update (TBC)Support a wireless 5-in-1 professional weather sensor (Included)Support up to 7 pcs wireless extra sensors (Optional) (item no. 7009999)Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms. DELIVERY SCOPEMain unitProfessional 5in1 sensor incl. mounting material100-240V/50 Hz power adapter and cable

Available

£150.41* £159.99* (5.99% saved)
%
BRESSER 5-in-1 Outdoor Sensor
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station. WARNING! One or more of the listed weather stations have a lot number restriction, so please also check the lot number of your device.1520015201156597002510 (from lot number 1181632)7002511 (from lot number 1199241)7002512 (from lot number 1233002)700251370025257002550CM30007002550GYE0007002550MGU0007002550QT50007002571700258070025817002585700259070026107002620908050096025107002550000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000 This high-quality replacement part will quickly get your weather station back in working order. FEATURES Replacement wireless sensor, transmits data to the WiFi colour weather centre Measures wind speed, wind direction, humidity, external temperature and precipitation Transmission frequency: 868 MHz Power supply: 3x AA batteries (not included) SCOPE OF DELIVERY Multifunctional external sensor Mounting materials No base station included Instruction manual

Available

£74.73* £74.99* (0.35% saved)
%
BRESSER Wi-Fi ClearView Weather Station with 7-in-1 Sensor
The new BRESSER WIFI ClearView Weather Station with 7-in-1 sensor offers a very comprehensive range of weather data. The multifunctional outdoor sensor can easily be installed with the included mounting accessories! The outdoor sensor reliably transmits measured values for wind speed, wind direction, humidity, temperature, precipitation, as well as UV level and light intensity via 868 MHz frequency to the base station. The base station shows a large variety of current and historical local weather data on its 8.3'' TRUE BLACK colour display. The latter allows internal storage and evaluation of the measurement data over a period of 24 hours. A very reliable forecast for the upcoming 12h is calculated by your local weather data which will be displayed on the base station. The WIFI function allows users to share their local data via apps such as 'Weather Underground'' or ''Weather Cloud''. In addition, the WIFI function enables Internet Time Synchronization and firmware updates. An alarm can be individually programmed for maximum and minimum values, which triggers both an acoustic and a light alarm signal when the specified value is reached. For outside temperatures from -3°C, a special alarm can also be activated for frost/ice warnings. A poor indoor climate often poses health risks, especially for children and elderly people. The BRESSER WIFI ClearView Weather Station offers a smart feature for this. The indoor climate indicator informs about current indoor climate conditions by means of the room climate indicator. For all ''moon addicts'' the different moon phases are also displayed. An alarm clock with snooze function is also included in the range of functions. This station can also be connected to the mulitlingual portal AWEKAS* (*EU customers only) . Optionally you can transmit your weather data to AWEKAS or call up your weather data worldwide. Transfer data such as air temperature, humidity, soil temperature and humidity, pool water temperature to your smart home home control system. FEATURES8.3'' colour display (19.3 x 9.3 cm) for detailed time and weather information WIFIconnection Internet time synchronization Receives weather data from the 7-in-1 sensor and the wireless thermo-hygro sensor via 868 MHz Publish your local data from your weather station on platforms like 'Weather Underground'', ''Weather Cloud" and "AWEKAS*" (*EU customers only)Display of time, calendar, weekday and moon phase wake-up function Ice/Frost warning Interior temperature (°C / °F) Humidity with comfort display Outdoor temperature (°C / °F) Display of UV level and light intensity Display of gusts and average wind speed Wind direction (exact display based on 16 directions) Rainfall (hourly, daily, weekly, monthly, total rainfall) Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy) Air pressure display Perceived outdoor temperature weather index for dew point, wind chill factor and heat index Min/max value memory (up to 24 hours) Alarm with LED display Weather Calibration 3 different display brightness levels: High / Low / Off 7 languages for the weekday Support of firmware updates Security type: supports WPA3 encryptionSupport a wireless 7-in-1 sensor with 150 m transmission range (included) Supports up to 7 additional wireless sensors (optional) (Art.-No.: 7009999) Integrated WIFI transmission to AWEKAS* (*EU customers only) Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms.What's IncludedBase station Outdoor sensor 7-in-1 incl. mounting accessories Power supply unit and cable, batteries not included

Pre-order

£216.63* £226.99* (4.56% saved)
%
BRESSER Weather Station 5-in-1 white
The new BRESSER Weather Station 5-in-1 white combines in a unique way a compact design with an extensive information service. The very compact and multifunctional outdoor sensor requires very little space and thus can be placed almost anywhere. A pipe clamp and screws for the attachment at poles (pipe diameter of about 25-33 mm) as well as a stand are included. The 5-in-1 outdoor sensor reliably transfers all measured values for wind speed, wind direction, humidity, temperature and precipitation rate to the base station. On the clearly structured display of the base station these values can be read but can also be stored as data history. The latter allows the internal storage and evaluation of measured data over a period of 24 hours. From the collected measured data, the weather station calculates a very reliable local weather trend forecast for the next 12 hours, depicted by six graphic symbols on the display. For minimum and maximum values an individual alarm can be programmed, which gives an acoustic and a light signal when the defined value is reached. For outside temperatures of -3 °C and below a special alarm for frost/ice warning can additionally be activated. A poor indoor climate often involves health risks especially for children and the elderly. The BRESSER Weather Station 5-in-1 offers you a smart feature to deal with this. The indoor climate indicator informs steadily about the indoor climate with a symbol. Furthermore the BRESSER Weather Station 5-in-1 features a radio controlled time and date setting (DCF time signal). In a few minutes after switching the device on the current Central European Time (CET) and the date with weekday are displayed automatically. For the “moonstruckers” also the different phases of the moon are shown. An alarm function with snooze mode is also integrated. FEATURES 5-in-1 outdoor multi sensor Inside temperature (°C/°F) and humidity Outside temperature (°C/°F) and humidity Wind direction and speed Graphical weather trend display (12 hours) Beaufort index (scale for the classification for wind speeds) Precipitation rate with history (day/week/month) Air pressure with history (24 hours) Heat index Dew point Radio controlled time and date setting Phases of the moon Alarm function Ice/frost warning Min/Max memory (up tp 24 hours) LED background light, amberGood to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms. SCOPE OF DELIVERY Base station with stand 5-in-1 Multisensor with mounting material Manual Additionally, 6 AA batteries are required (not included) PLEASE NOTE: If you should ever need a new outdoor sensor for this product, please check the LOT number on your device or on the packaging: Weather Stations with LOT number 1156742 and lower are compatible with the outdoor sensor with item number 7802510. Weather Stations with LOT number 1156743 and higher are compatible with the outdoor sensor with item number 7802580.

Available

£103.11* £122.99* (16.16% saved)
%
NATIONAL GEOGRAPHIC 256-Colour and RC Weather Station 5-in-1
The new design of the National Geographic Colour Display Weather-Station impresses with an excellent performance and excellent value for money. The weather station combines a compact design with a comprehensive information service. The new, unique colour display offers clear information and an ideal overview in an elegant design. The multifunctional outdoor sensor with its very compact design can be set up in almost any location. A pipe clamp and screws for attachment to masts (pipe diameter approx. 25-33 mm) as well as a stand for level mounting are already included in the scope of delivery! The 5-in-1 outdoor sensor reliably transmits measured values for wind speed, wind direction, humidity, temperature and amount of precipitation to the base station. On the display of the base station not only these values, but also a variety of history data can be read. The latter enables the internal storage and evaluation of the measurement data over a period of 24 hours. From the collected measurement data, the weather station calculates a very reliable local weather trend forecast for the next 12 hours, which is shown on the display by six graphic symbols. An alarm can be individually programmed for maximum and minimum values, which triggers both an acoustic and a light signal when the specified value is reached. For outside temperatures from -3 °C, a special frost/ice warning alarm can also be activated. A poor indoor climate can pose health risks, especially for children and elderly people. The National Geographic Weather Station also offers a smart feature for this purpose. The room climate indicator always informs about the room climate by means of a symbol.PROPERTIES5-in-1 Multisensor for outdoor useInstallation material for outdoor sensor included in deliveryInside temperature (°C/°F) and humidityOutside temperature (°C/°F) and humidityWind direction and speedGraphical weather trendsDisplay (12 hours)Beaufort-Index (scale for classification of wind forces)Precipitation with history (day/week/month)Air pressure with history (24 hours)Heat-IndexDewpointRadio controlled time and date settingMoon phasesAlarm functionIce/freezing warningMin.-/Max. value memory (up to 24 hours)LED backlight, amberGood to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms. DELIVERY SURFACEBase station with pedestal5-in-1 Multisensor with mounting materialOperating instructions3 pcs. of LED backlight for operation. AA batteries required (not included)

Available

£73.72* £77.43* (4.79% saved)
BRESSER 8-in-1 Wi-Fi Professional Home Weather Station Bise
With the BRESSER 8-in-1 Wi-Fi Professional Home Weather Station Bise, you’ll never be caught out by the weather. This sleek Wi-Fi weather station brings all the essentials - from climate to time data - together on a crisp 7.4-inch (18.8 cm) display. And when the mercury rises, the WBGT with heat stress level helps you keep your cool. Thanks to Wi-Fi connectivity, your data is always at hand - whether you’re out and about or taking it easy on the sofa. Your garden, your weather report Why rely on forecasts from miles away when your own outdoor sensor tells the full story? This weather station with outdoor sensor collects temperature, humidity, wind speed, wind direction, rainfall, UV level, light intensity and WBGT straight from your surroundings. With a 150 m range and a weatherproof housing, it’s easy to find the perfect spot for this powerful all-rounder. WBGT - a hot topic worth watching When the heat is on, your body needs extra care. That’s why the WBGT reading (Wet Bulb Globe Temperature) is so valuable. This digital weather station combines air temperature, mean radiant temperature and wet-bulb temperature to show how effectively your body can cool itself. If this last value stays above 35 °C for too long, it’s time to slow down. Whether you’re exercising, gardening or enjoying the outdoors, this professional weather station gives you round-the-clock WBGT values. The heat stress index also lets you know intuitively when to take it easy. Keep the indoors in check too This isn’t just about the great outdoors - the home weather station also keeps tabs on your indoor climate. The built-in thermometer monitors room temperature, the hygrometer measures humidity, and the comfort indicator gives you an instant smiley-face check on your air quality. Meanwhile, the integrated barometer tracks air pressure, warning you when a change in the weather is brewing. All the extras you’d expect from a pro This garden weather station doesn’t stop at the basics. Alongside exact measurements and a graphical forecast, it shows useful values such as feels-like temperature, heat index, dew point and wind chill. The Beaufort scale reveals just how breezy it will feel outdoors, while the max./min. memory tracks trends over time. Customisable high/low alarms alert you to conditions that matter most. And here’s a clever winter perk: when the temperature outside dips below -3°C, the alarm wakes you 30 minutes early so you can take your time on frosty mornings. Meet your all-in-one weather expert - the BRESSER 8-in-1 Wi-Fi Professional Home Weather Station Bise. FEATURES BASE STATION Wi-Fi connection for sharing local weather data on Weathercloud Displays readings from the 8-in-1 solar outdoor sensor (outdoor temperature, humidity, wind speed/direction, rainfall, UV level, light intensity, WBGT) Graphical weather forecast Air pressure Indoor temperature and humidity with comfort indicator Heat stress index Beaufort scale (wind force classification) Weather index (feels-like temperature, heat index, dew point, wind chill) Max./min. memory High/low alarms Automatic time, date and moon phase via internet sync Alarm clock with frost alert WSLink app for easy Wi-Fi setup, data calibration and firmware updates Supports up to 6 additional optional thermo-hygro sensors (not included, see BRESSER accessories) Power supply: USB cable with mains adapter (included), CR2032 backup battery (not included) Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms. FEATURES SENSOR Measures temperature, humidity, wind speed/direction, rainfall, UV level, light intensity and WBGT Weatherproof housing Range up to 150 m Powered by 3 x AA batteries (not included) SCOPE OF DELIVERY Base station with mains adapter 8-in-1 outdoor sensor Instruction manual

Available

£179.00*
%
BRESSER Additional / Spare Base Station for Weather Station 7002580
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station. WARNING! One or more of the listed weather stations have a lot number restriction, so please also check the lot number of your device.15200152017002510 (from lot number 1181632)7002511 (from lot number 1199241)7002512 (from lot number 1233002)700251370025257002550CM30007002550GYE0007002550MGU0007002550QT500070025717002580700258170025857002590908050096025107002550000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000 Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES Base station for 5-in-1 multi-sensor and other weather stations Indoor temperature (°C/°F) and humidity Displays the graphical weather trend (12 hours) Beaufort index (scale for measuring wind speed) Rainfall with history (day/week/month) Air pressure with history (24 hours) Heat index Dewpoint Radio-controlled time and date settings Phases of the moon Alarm function Ice/frost warning Min./max. memory (up to 24 hours) SCOPE OF DELIVERY Base station Stand Power adapter

Currently unavailable

£103.11* £103.99* (0.85% saved)