The thermo-hygrometer is perfect for preventing mold formation and too dry indoor air in up to 4 rooms
- 4 measurement readings of temperature (accuracy: +/- 1°)
- 4 measurement readings of relative humidity (accuracy: +/- 5%)
- Thermo-/Hygrometer (3 sensors incl.)
- Dimensions: 104x119x25mm, weight: 152g
- Delivery scope: Thermo-/Hygrometer, 3x sensors, manual
- Also suitable for monitoring bathrooms, wet rooms, etc.
- Climate comfort indicator as smiley symbol
- Mounting type: stand, wall mount and magnet
£33.99*
Available, delivery time: 10-12 working days
Product number:
7000020CM3000
EAN:
4007922035499
WEEE-Reg.-Nr.:
DE 34323861
Help & Service for your product
Here you will find quick help, answers to frequently asked questions, and direct access to support.
Service Portal
Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.
Service PortalSensor Form
In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.
Sensor Form
FAQ - Frequently Asked Questions
The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
Tips:
- Remove all batteries from the base station and the outdoor sensor.
- Wait at least 3–10 minutes.
- Insert the batteries into the base station.
- Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.
Tips:
- If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
- Do not place the base station near other electronic devices (this may interfere with reception).
- If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
- Briefly press the reset button on the back with a pen
- If necessary, place the station closer to a window, as reception inside buildings may be limited
Product information "BRESSER Thermo-Hygrometer Quadro with 4 Independent Measuring Details"
The BRESSER Thermo- / Hygrometer Quadro offers the possibility to measure temperature and air humidity in or around your house at 4 different locations with simple monitoring at one location: Is my cellar room too moist and threatened by mold? Is the children's bedroom temperature all well? Is it too hot on the terrace? There are many more options open.
The three sensors deliver the data sets over 433 Mhz radio frequency to the master station, which also measures temperature and humidity.
Battery powered by 3x AAA / LR03 batteries (mainstation) and 6x AAA / LR03 batteries (for the three sensors).
FEATURES
The three sensors deliver the data sets over 433 Mhz radio frequency to the master station, which also measures temperature and humidity.
Battery powered by 3x AAA / LR03 batteries (mainstation) and 6x AAA / LR03 batteries (for the three sensors).
FEATURES
- 4 measurement readings
- Early prevention of mould
- 433 Mhz transmission frequency
- Remote sensors are splashproof - suitable for outdoors
- With Thermo / hygro remote sensor (3x incl.)
- Measurement accuracy: temperature +/- 1 °C, humidity: +/- 5 %
- Mounting type: stand, wall mount and magnet
- Dimensions and weight base station: 10.4x11.9x2.5cm, 152 g
- Thermo- / hygrometer
- 3x remote sensor
- User guide
| 1) Footnote: | Batteries user supplied, unless not content of delivery. |
|---|---|
| 2) Footnote: | The batteries are not included in the delivery. Please, use only the batteries that are recommended. Take a particular attention to the safety instructions written in the user guide. |
| Assembly required: | No |
| Batteries included: | No |
| Batteries required: | Yes |
| Body material: | Plastic |
| Colour: | black , grey , white |
| Display height (cm): | 9.2 |
| Display size (diagonal in cm): | 12.4 |
| Display width (cm): | 8.3 |
| Extended warranty (years): | 5 |
| Field of application [Electronics]: | Bathroom , Household , Humidity measurement , Temperature measurement , Time display |
| GPS: | No |
| Height of the largest digit on the display (cm): | 1.8 |
| Indoor sensor humidity measuring range from (%): | 20 |
| Inside temperature (°C) from: | -9.9 |
| Inside temperature (°C) up to: | 60 |
| Material: | Plastic |
| Measurement accuracy inside humidity (%): | ± 5 |
| Measurement accuracy inside temperature (°C): | ± 1 |
| Measurement accuracy outside humidity (%): | ± 5 |
| Measurement accuracy outside temperature (°C): | ± 1 |
| Measurement function: | Humidity , Temperature |
| Measurement range for indoor humidity sensor up to (%): | 95 |
| Measurement range for outdoor humidity sensor from (%): | 20 |
| Measurement range for outdoor humidity sensor up to (%): | 95 |
| Net Weight total (incl. accessories) (g): | 279 |
| Net weight (without access.) (g): | 148 |
| Number of sensors included in the package: | 3 |
| Outside temparature (°C) from: | -40 |
| Outside temparature (°C) up to: | 60 |
| Power supply 1): | 1.5V Batteries |
| Power supply unit included: | No |
| Resolution inside humidity (%): | 1 |
| Resolution inside temperature (°C): | 0.1 |
| Resolution of outdoor humidity sensor (%): | 1 |
| Resolution outside temperature (°C): | 0.1 |
| Smartphone app: | No |
| Total height (mm): | 25 |
| Total length (mm): | 105 |
| Total width (mm): | 120 |
| Transmission frequency (MHz): | 433 |
| Transmission range (m): | 30 |
| Typ [Batteries]: | AAA |
| Type of mounting: | Stand , Wall bracket |
| Water-repellent: | No |
| Waterproof 8): | No |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- WARNING! Do not swallow the battery, risk of chemical burns. This product contains a button cell/button battery. If swallowed, it can cause severe internal chemical burns within just 2 hours and may lead to death. If the battery compartment cannot be securely closed, do not use the product and keep it away from children.
- If you believe batteries may have been swallowed or are in any body part, seek immediate medical attention. When disposing of this product, make sure it is collected separately if required.
- The AC/DC adapter serves as a disconnecting device. - The device’s AC/DC adapter should not be covered OR must be easily accessible during normal use. - To completely interrupt the power supply, the AC/DC adapter of the device must be disconnected from the network.
- CAUTION - There is a risk of explosion if the battery is not replaced correctly. Replace only with the same or an equivalent type. The battery should not be exposed to extreme temperatures, low air pressure, or high altitudes during use, storage, or transport.
- Replacing a battery with an incorrect type can lead to an explosion or leakage of flammable liquid or gas. Do not throw the battery into fire or a hot oven, or mechanically crush or cut it. This can lead to an explosion.
- The presence of a battery in an environment with extremely high temperatures can cause an explosion or leakage of flammable liquids or gases. - A battery exposed to extremely low air pressure can explode, or there may be leakage of flammable liquids or gases.
Skip product gallery
Compatible Sensors
BRESSER Thermo-Hygro Sensor 433 MHz
£23.99*
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.1489514993149981500415131152431529815405154061540715408154091541815479154961565216206162077000012CM30007000012GYE00070000137000020CM30007000020GYE0007000020QT50007000023700002770000297000030700006070042007004200GYE0007004200HZI0007004200MGU0007004200QT50007004210700433070043407004350700436070043707004380700650070065107006511700720170073507007402700740370074047007511700752070076107007620907060090707009070710960410196042009604210700001200000070000200000007004200000000
Living room, bedroom and children's room, kitchen and of course the bathroom - all benefit from a regular room climate check to ensure optimal comfort. So, enhance your weather station with this BRESSER Thermo-Hygro Sensor, allowing you to monitor conditions at an additional location. The sensor sends data over a significant distance of up to 80 meters, instantly displaying it on your base station's screen.
Wondering if it's really that warm? The sensor includes an LCD display for immediate, on-site verification of current readings. This feature also enables this temperature and humidity meter to function as a standalone thermo-hygrometer.
FEATURES
Measures temperature and humidity
Easy-to-read LCD display
Functions as an independent solution, or as a replacement or supplementary sensor for select BRESSER weather stations
Maximum range of up to 80 meters
IP Protection Class: IP44Frequency: 433 MHz
Dimensions: 71 x 65 x 23 mm / weight: 44 g
Powered by 2x 1.5V AAA batteries (not included)
SCOPE OF DELIVERY
Thermo-Hygro Sensor
Instruction manual
Available
Skip product gallery
Customers also bought
BRESSER Solar Eclipse Glasses (1 piece) - Design A
£3.20*
With the BRESSER Solar Eclipse Glasses, you can experience one of nature's most captivating events safely and effortlessly. Whether it's an annular, total, or partial eclipse, the sight of the moon crossing in front of the sun is always breathtaking. Designed to protect your eyes, these specialist glasses are crafted in the USA to meet the highest safety standards.
BRESSER Eclipse Glasses: Your safe window to the sun
The glasses feature premium-quality white light filter film that effectively blocks harmful UV and IR rays. This ensures a bright and natural yellow image of the sun. Thanks to their sturdy construction, these glasses are built for repeated use. You can even use them to spot large sunspots or enjoy the rare sight of planes flying in front of the sun.
Be prepared for the next eclipse and enjoy safe solar viewing with the BRESSER Solar Eclipse Glasses.
FEATURES
Specialist glasses for safe solar eclipse viewing
Provides a natural, bright yellow image of the sun
Ideal for safe visual solar observation
Durable and resistant to damage
Ready to use immediately
Complies with EN ISO 12312-2:2015 standards, verified by independent testing at ICS INC. Laboratories
SCOPE OF DELIVERY
1x Solar Eclipse Glasses
Available
BRESSER Thermo-Hygrometer with Mould Alert
£23.99*
When it comes to your well-being, don't settle for less – this includes maintaining a healthful environment. Keep your indoor climate in check with the BRESSER Thermo-Hygrometer with Mould Alert. It accurately measures temperature and humidity and impresses with comprehensive warning functions. You'll always know when to heat, ventilate, humidify, or dehumidify.
Mould prevention made easy – with the BRESSER Thermo-Hygrometer
Especially in older buildings or during the cold months, it sometimes creeps into the basement or living area: mould. This temperature and humidity measuring device warns you when the conditions for mould growth are particularly favourable. So with the thermo-hygrometer at your disposal, you can swiftly and efficiently take measures to ward off mould in your environment.
Thermometer and hygrometer with handy alert features
This BRESSER Thermo-Hygrometer quickly becomes an invaluable guide for your well-being. The clear display shows the integrated heat warning, which alerts to unfavourable levels of high temperature and humidity. Ideal for individualists: set a personalised humidity alert to be informed when your specific humidity thresholds are crossed.
Take control of your indoor climate now - with the BRESSER Thermo-Hygrometer with Mould Alert!
FEATURES
Thermo-Hygrometer with mould and heat warnings
Measures indoor temperature and humidity
Five-level colour-coded climate indicator
Graphical humidity trend history
High/low humidity alarm settings
Battery-powered: 2x AAA (Micro), 1.5V (not included)
SCOPE OF DELIVERY
Thermo-Hygrometer
Instruction manual
Available
Skip product gallery
Customers also viewed
KIENZLE Home Weather Station Slim
£16.59*
The KIENZLE Home Weather Station Slim combines elegant design with impressive functionality. Its clear display provides accurate readings of temperature and humidity for both indoor and outdoor areas. You’ll also benefit from reliable weather forecasts featuring a handy trend indicator. And, as you’d expect from Germany’s oldest watchmaker, the time is always displayed.
Comprehensive measurement features This wireless weather station uses a built-in thermo-hygrometer to monitor indoor temperature and humidity. Outdoor data is gathered by the wireless sensor, which transmits temperature and humidity readings from up to 60 metres away directly to the weather station’s sleek display.
Accurate weather forecasting Get trustworthy weather forecasts including a practical trend arrow. Calibration is quick and easy during setup. Just check it against the current outdoor conditions, make a quick adjustement if necessary, and you’re good to go. From then on, forecasts are reliably calculated based on air pressure changes.
Additional useful features The station records maximum and minimum values, making it easy to track changes in temperature and humidity at the press of a button. The display also features a touch-activated backlight, perfect for use both day and night. Discover the KIENZLE Home Weather Station Slim, a stylish weather measurement device that fits perfectly into any environment.
FEATURES BASE STATION
Sleek wireless weather station with a user-friendly display Measures indoor temperature and humidity Displays outdoor temperature and humidity Weather forecasts with trend indicator (based on air pressure) Max/min value memory Touch-activated backlight Time display Battery-powered: 2x AAA (not included)
FEATURES OUTDOOR SENSOR
Measures temperature and humidity Range: up to 60 metres Mounting options: hanging loop or stand Battery-powered: 2x AAA (not included) SCOPE OF DELIVERY
Weather station Thermo-hygro outdoor sensor Instruction manual
Currently unavailable
