Skip to main content Skip to search Skip to main navigation
Please note that our minimum order value is £50

BRESSER Thermo-Hygro Sensor

Help & Service for your product

Here you will find quick help, answers to frequently asked questions, and direct access to support.

Service Portal

Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.

Service Portal

Sensor Form

In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.

Sensor Form

Ratgeber & Tipps

FAQ - Frequently Asked Questions

The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
  1. Remove all batteries from the base station and the outdoor sensor.
  2. Wait at least 3–10 minutes.
  3. Insert the batteries into the base station.
  4. Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.

Tips:
  • If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
  • Do not place the base station near other electronic devices (this may interfere with reception).
  • If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
  • Briefly press the reset button on the back with a pen
  • If necessary, place the station closer to a window, as reception inside buildings may be limited

Product and safety instructions


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • RISK OF SUFFOCATION! Improper use of this product can lead to suffocation, especially in children. Therefore, it is essential to follow the safety information below. Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a suffocation risk! This product contains small parts that could be swallowed by children! There is a suffocation risk!
  • Risk of electric shock! This device contains electronic parts powered by a power source (power supply and/or batteries). Improper use of this product poses a risk of electric shock. An electric shock can cause serious to fatal injuries. Therefore, be sure to follow the safety information below. Never leave children unsupervised when handling the device! The device must only be used as described in the instructions, otherwise, there is a risk of electric shock!
  • Explosion risk! Improper use of this product poses an explosion risk. Be sure to follow the safety information below to avoid an explosion. Do not expose the device to high temperatures. Only use the recommended batteries. Do not short-circuit the device and batteries, or throw them into fire! Excessive heat and improper handling can cause short circuits, fires, and even explosions!
  • Risk of material damage! Improper handling may damage the device and/or accessories. Therefore, use the device only according to the following safety information. Do not disassemble the device! In case of a defect, please contact your specialist dealer. They will contact the service center and may send the device for repair if necessary. Do not immerse the device in water! Do not expose the device to shocks, vibrations, dust, prolonged high temperatures, or extreme humidity. This may lead to malfunctions, short circuits, as well as damage to batteries and components. Only use the recommended batteries. Always replace weak or used batteries with a completely new set of fully charged batteries. Do not use batteries from different brands, types, or varying capacities. Remove batteries from the device when it is not used for an extended period.
  • Risk of voltage damage! The manufacturer is not liable for voltage damage resulting from incorrectly inserted batteries!
Skip product gallery

Customers also bought

%
BRESSER Soil Temperature and Moisture Meter
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15196151971519815199152011543915440156591566016479700254170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 This additional sensor allows you to take two additional practical measurements with your BRESSER weather station. In addition to the soil temperature, the sensor can also measure the soil moisture – ideal for plant lovers and gardeners. Measurements are sent to the base station at 60 second intervals. The soil moisture meter can be positioned up to 150 metres away from the base station. There are also 7 different channels to choose from. And thanks to the weatherproof housing, the wireless sensor is able to withstand adverse weather conditions. FEATURES Wireless and compact soil sensor Measures the soil humidity Measures the soil temperature Transmission interval: 60 seconds Extra-long range of up to 150 metres Cable length: approx. 140 cm 7 available channels LED indicator for data transmission Weatherproof housing Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Soil sensor Instruction manual

Available

£36.89* £36.99* (0.27% saved)
Skip product gallery

Customers also viewed

NATIONAL GEOGRAPHIC Thermo-Hygro Sensor 3CH
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.70074007007500950120095012019501202 Living room, bathroom, kitchen, wine cellar – there's no shortage of spaces where keeping an eye on the indoor climate makes sense. But one or two temperature and humidity sensors can quickly fall short. Add this neat little thermo-hygrometer sensor to your compatible weather station and keep tabs on every corner of your home. FEATURES3 channel available433 MHz transmitting frequencyFoldable standIntegrated hole for easy wall mountingRequires 2x AAA batteries (not included)SCOPE OF DELIVERYThermo/Hygrometer

Available

£17.99*
%
BRESSER Thermo Outdoor Sensor
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.70042007004200GYE0007004200HZI0007004200MGU0007004200QT50007004210960420096042107004200000000 In bedrooms, study rooms, living rooms, bathrooms, and even kitchens – continuously monitoring the room temperature is beneficial in many areas of the house to ensure a pleasant living climate. Therefore, you can enhance your weather station with this precise BRESSER Thermo Outdoor Sensor for another measurement location. The temperature data is quickly and reliably transmitted to the display of your base station from a distance of up to 80 meters. How warm is it really here? The sensor has its own LCD display, so you can read the current temperature values directly on site. This makes the thermometer also ideal as a standalone thermometer. FEATURES Measurement of temperature Clear LCD display Suitable as a standalone solution, replacement, or additional sensor for some BRESSER weather stations Range: up to 80 m IP protection class: IP44 Dimensions: 71 x 64 x 22 mm / Weight: 44 g Battery operated: 2x 1.5 V AAA batteries (not included) SCOPE OF DELIVERY Thermo radio sensor Instruction manual

Available

£23.60* £23.99* (1.63% saved)
%
BRESSER Wireless Sensor
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15002154607001040 Living room, bathroom, kitchen, wine cellar – there's no shortage of spaces where keeping an eye on the indoor climate makes sense. But one or two temperature and humidity sensors can quickly fall short. Add this neat little thermo-hygrometer sensor to your compatible weather station and keep tabs on every corner of your home.FEATURES Measures temperature and humidity For some weather stations with 433 MHz frequency (see compatibility list) Clear display 50m range (in open terrain) SCOPE OF DELIVERY Thermo-hygrometer sensor Instruction manual

Available

£18.91* £18.99* (0.42% saved)
BRESSER Home Weather Station Cumulus
With the BRESSER Home Weather Station Cumulus, you'll always be ahead of the weather. It keeps you reliably informed with all the essential weather data for both indoors and out. Temperature, humidity, barometric pressure - everything's displayed clearly on the sleek screen, perfect for home, office or anywhere else. Your daily weather briefing - wireless weather station with dependable forecasting Warm jumper or light top? Sunscreen or brolly? One quick look at the graphical weather forecast gives you the answer instantly. The precise outdoor temperature and humidity readings show you exactly what conditions are like just outside. The weather indices for dew point and heat index, plus barometric pressure readings with trend charts, give you the complete weather picture. Accurate readings for perfect indoor comfort Overly dry air from the heating in the lounge, or too much moisture building up in the kitchen? The handy comfort indicator tells you at a glance whether your indoor climate is spot on. The stylish base station also monitors current room temperature and humidity using its built-in thermometer and hygrometer. The max/min memory function tracks daily highs and lows, so you know when it's time to open the windows.Alerts for effortless daily living Feeling chilly at 19°C and reaching for the air con at 24°C? Simply set your comfort zone and the high/low weather alerts will let you know when temperatures go beyond your preferred range. It doesn't stop at temperature either - humidity and barometric pressure changes are automatically flagged up too. Especially useful on frosty winter mornings: the alarm with snooze function and built-in frost alert wakes you 30 minutes early when outdoor temperatures drop below -3°C. Plenty of time to layer up and clear the windscreen. Bring home your personal weather assistant today - the BRESSER Home Weather Station Cumulus! FEATURES BASE STATION Stylish 5.7" true black colour display Indoor temperature & humidity readings with comfort indicator Outdoor temperature & humidity display Graphical weather forecast Barometric pressure with trend chart Weather indices for heat index & dew point Max/min memory function High/low weather alerts for indoor/outdoor temperature & humidity, barometric pressure and optional sensor readings Automatic time, date, day and moon phase via DCF signal (manual setting also available) Alarm with snooze and frost alert Expandable with up to 7 additional sensors (sold separately) Power: Mains adapter (included), CR2032 backup battery (not included) FEATURES SENSOR Temperature and humidity readings Range: up to 30 metres Battery powered: 2x AA batteries (not included) SCOPE OF DELIVERY Base station 1x thermo-hygrometer sensor Mains adapter Instruction manual

Available

£69.00*