Skip to main content Skip to search Skip to main navigation
Please note that our minimum order value is £50

BRESSER Thermo-Hygro Sensor 3CH - Suitable for BRESSER Thermo-Hygrometer

Help & Service for your product

Here you will find quick help, answers to frequently asked questions, and direct access to support.

Service Portal

Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.

Service Portal

Sensor Form

In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.

Sensor Form

Ratgeber & Tipps

FAQ - Frequently Asked Questions

The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
  1. Remove all batteries from the base station and the outdoor sensor.
  2. Wait at least 3–10 minutes.
  3. Insert the batteries into the base station.
  4. Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.

Tips:
  • If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
  • Do not place the base station near other electronic devices (this may interfere with reception).
  • If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
  • Briefly press the reset button on the back with a pen
  • If necessary, place the station closer to a window, as reception inside buildings may be limited

Product and safety instructions


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • RISK OF SUFFOCATION! Improper use of this product can lead to suffocation, especially in children. Therefore, it is essential to follow the safety information below. Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a suffocation risk! This product contains small parts that could be swallowed by children! There is a suffocation risk!
  • Risk of electric shock! This device contains electronic parts powered by a power source (power supply and/or batteries). Improper use of this product poses a risk of electric shock. An electric shock can cause serious to fatal injuries. Therefore, be sure to follow the safety information below. Never leave children unsupervised when handling the device! The device must only be used as described in the instructions, otherwise, there is a risk of electric shock!
  • Explosion risk! Improper use of this product poses an explosion risk. Be sure to follow the safety information below to avoid an explosion. Do not expose the device to high temperatures. Only use the recommended batteries. Do not short-circuit the device and batteries, or throw them into fire! Excessive heat and improper handling can cause short circuits, fires, and even explosions!
  • Risk of material damage! Improper handling may damage the device and/or accessories. Therefore, use the device only according to the following safety information. Do not disassemble the device! In case of a defect, please contact your specialist dealer. They will contact the service center and may send the device for repair if necessary. Do not immerse the device in water! Do not expose the device to shocks, vibrations, dust, prolonged high temperatures, or extreme humidity. This may lead to malfunctions, short circuits, as well as damage to batteries and components. Only use the recommended batteries. Always replace weak or used batteries with a completely new set of fully charged batteries. Do not use batteries from different brands, types, or varying capacities. Remove batteries from the device when it is not used for an extended period.
  • Risk of voltage damage! The manufacturer is not liable for voltage damage resulting from incorrectly inserted batteries!
Skip product gallery

Customers also bought

BRESSER JUNIOR 40x-1024x Microscope with HD Eyepiece Camera
Ready for some thrilling discoveries? Experience the microscopic world in grand detail with the BRESSER JUNIOR 40x-1,024x Microscope with HD Eyepiece Camera. How much detail? That’s up to you! Equipped with 2 eyepieces, 3 objectives, and a 1.6x Barlow lens, this microscope allows you to see your samples magnified between 40 and 1,024 times! Start at the lowest level and enjoy the transformation of the image as you increase the magnification. The pull-out Barlow lens gives you the ability to zoom continuously. What will you explore first? To get you started right away, the microscope set includes some fascinating prepared slides. Just place them on the stage and let the bright LED reveal wonders previously hidden from sight. Exploring small wonders of nature through the microscope Once you’re familiar with your kids’ microscope, embark on a quest for your next project! Whether it’s feathers, hair, or muddy water from a watering can, you can examine anything transparent or very thin with the transmission microscope. You can also take a closer look at the internal structures of opaque objects, like plants, after preparing them with the microtome included in your microscope set.Impressed by what you see? Turn it into your own permanent slide! Slides, cover glasses, and mounting medium – all the essentials are included. Animal enthusiasts will delight in a special experiment included in the microscope set: a kit for breeding your own brine shrimp (Artemia). Once the creatures have hatched, use your kids’ microscope to watch them grow and evolve. Observing comfortably via screen using the HD eyepiece camera Modern science requires advanced technology. That’s why you can connect your microscope to your PC via a USB port. Simply install the provided Windows software (compatible with Win 10/11) and point the high-quality HD eyepiece camera at your specimen. Now you can conduct your examinations comfortably on your computer screen. Capture unique moments of discovery in striking photos, or shoot a video if the scene under the lens is dynamic. Perfect for documenting the growth of your brine shrimp (Artemia)! Sharing your discoveries is easy with these recordings, bringing your friends and family into your world of miniature marvels. Embark on your captivating journey through the microcosm with the BRESSER JUNIOR 40x-1,024x Microscope with HD Eyepiece Camera! FEATURES Kids’ microscope with durable metal body and extensive accessories USB HD eyepiece for PC connection Magnification: 40x–1,024x 2 Wide field eyepieces (10x and 16x) 3 Objectives (4x, 10x, 40x) Pull-out Barlow lens (1.6x) for seamless zooming Ready-to-use permanent specimens for an immediate start in microscopy Experiment kit for cultivating brine shrimp (Artemia) Software for image editing (compatible with Win 10/11) Bright LED illumination Suitable for children aged 8 and older SYSTEM REQUIREMENTS Windows 10, or 11 Intel i3, i5, i7, or i9 processor from the 2nd generation onwards or AMD FX or Ryzen processor An optical drive or Internet connection for software download USB 2.0 SCOPE OF DELIVERY Kids’ microscope USB HD eyepiece Barlow lens (pre-installed in the eyepiece draw) 2x Wide field eyepieces 3x Objectives 5x Slides 10x Cover glasses 5x Prepared slides Pipette Tweezers Experiment kit (magnifier box, brine shrimp eggs, yeast) Sea salt Mounting medium Software Instruction manual

Available

£94.99*
BRESSER Thermo-Hygro Sensor 433 MHz
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.148951499314998150041513115243152981540515406154071540815409154181544415479154961565216206162077000012CM30007000012GYE00070000137000020CM30007000020GYE0007000020QT50007000023700002770000297000030700006070042007004200GYE0007004200HZI0007004200MGU0007004200QT50007004210700433070043407004350700436070043707004380700650070065107006511700720170073507007402700740370074047007511700752070076107007620907060090707009070710960410196042009604210700001200000070000200000007004200000000 Living room, bedroom and children's room, kitchen and of course the bathroom - all benefit from a regular room climate check to ensure optimal comfort. So, enhance your weather station with this BRESSER Thermo-Hygro Sensor, allowing you to monitor conditions at an additional location. The sensor sends data over a significant distance of up to 80 meters, instantly displaying it on your base station's screen. Wondering if it's really that warm? The sensor includes an LCD display for immediate, on-site verification of current readings. This feature also enables this temperature and humidity meter to function as a standalone thermo-hygrometer. FEATURES Measures temperature and humidity Easy-to-read LCD display Functions as an independent solution, or as a replacement or supplementary sensor for select BRESSER weather stations Maximum range of up to 80 meters IP Protection Class: IP44Frequency: 433 MHz Dimensions: 71 x 65 x 23 mm / weight: 44 g Powered by 2x 1.5V AAA batteries (not included) SCOPE OF DELIVERY Thermo-Hygro Sensor Instruction manual

Incoming

£23.99*
NATIONAL GEOGRAPHIC Tempy Thermo-Hygrometer, Set of 4
This set of 4 compact NATIONAL GEOGRAPHIC Tempy Thermo/Hygrometer sensors is perfect for monitoring the temperature and humidity in different rooms and maintaining a healthy indoor climate. Effectively prevent dry and moist air Heating your home is a must in areas with cold winters. However, heating can also result in dry air, which can cause chapped lips and cracked skin. At the other end of the spectrum, high humidity can rapidly lead to mould forming. These thermometers and hygrometers are the perfect way to ensure that you maintain an optimal temperature and humidity in your home. In addition to displaying precise measurements of the temperature and humidity, the sensor also features a comfort indicator, which displays a smiley to indicate how comfortable the current conditions are based on the measured readings. The temperature measurements can also help you to save energy during the winter. Lowering the temperature by 1°C reduces the amount of energy used by up to 6% – good for the environment and your wallet! Clever design for tabletops or wall mounting Featuring a chic and compact design, these temperature and humidity sensors are ideal for living rooms, offices and any other areas of your home. Each sensor comes with an elegant stand – perfect for desks, sideboards or windowsills. They can also be wall-mounted – simply slide your finger through the stand and remove the magnetic back panel to access the hook above the hidden battery compartment. Monitor the indoor climate in 4 rooms with this set of 4 NATIONAL GEOGRAPHIC Tempy Thermo/Hygrometer sensors! FEATURES 4x thermometer/hygrometer Displays the temperature in °C Displays the humidity in % Indoor comfort indicator with smiley Ideal for preventing mould Removable magnetic back panel for wall mounting Required batteries: 4x 3 V CR2032 (included) SCOPE OF DELIVERY4x thermo-hygrometer 4x CR2032 batteries Instruction manual

Available

£13.04*
BRESSER Quadro Individuo S Thermo-Hygrometer
The BRESSER Quadro Individuo S Thermo-Hygrometer gives you complete control over your home's climate. This clever device displays readings from 4 different locations on one screen, so you can monitor conditions throughout your house at a glance. Beyond basic temperature and humidity monitoring, it comes packed with handy extras like an alarm clock and memory storage for peak readings. Complete Home Climate Monitoring Made Simple The day begins in the cosily heated living room, the laptop awaits in the cooler study, and in the evening you wind down in the perfectly balanced bedroom - this system has you covered. The built-in temperature and humidity meters in the base unit work alongside 3 wireless sensors to give you a complete picture of your home's climate. You can label each sensor with custom room names, so you'll instantly know if the nursery's getting chilly or rather the basement's bang on target. Clever Features That Make a DifferenceWinter heating drying out your home? Bathroom getting a bit too steamy? The memory function tracks maximum and minimum readings, helping you spot overly dry air or potential damp issues in time. Start your mornings right with the built-in alarm and snooze function. Even better, you'll never need to adjust the time manually – it automatically stays accurate via radio signal. Wireless Sensors That Go the Distance Got a workshop in the garage or a spare room in the loft? These wireless sensors work from up to 80 metres away, bringing readings from every corner of your home straight to your bedside table. They're built tough too – IP44 water-resistant rating means they'll happily sit in steamy bathrooms, busy kitchens, or even outside in the garden. Each sensor has its own display as well, so you can check readings on the spot. Take control of your home's comfort with the BRESSER Quadro Individuo S Thermo-Hygrometer. FEATURES BASE STATION Built-in thermometer and hygrometer for local readings Displays data from all 3 wireless sensors Custom room naming for each sensor channel Temperature readings with trend arrows (°C/°F switchable) Humidity readings with trend indicators (%) Records and stores maximum/minimum values DCF Radio-controlled time display (12/24-hour format, weekdays in 7 languages)***Alarm clock with snooze function Runs on 2x AAA 1.5V batteries (included) Battery level indicators for base unit and all sensors ***PLEASE NOTE: This device receives the DCF time signal (Central European Time). However, you can easily adjust the time display to different time zones using the offset function. FEATURES SENSOR Set of 3 thermo-hygro sensors included Measures temperature and humidity (indoor/outdoor use) Individual display on each sensor for local readings Transmission range: up to 80 metres Water-resistant rating: IP44 (splash-proof) Dimensions: 71 x 65 x 23 mm / Weight: 44g Each sensor runs on 2x AAA 1.5V batteries (included) SCOPE OF DELIVERY Base station unit 3x wireless thermo-hygro sensors 8x AAA/LR03 1.5V batteries Instruction manual

Available

£33.95*
Skip product gallery

Customers also viewed

BRESSER Wireless Sensor
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15002154607001040 Living room, bathroom, kitchen, wine cellar – there's no shortage of spaces where keeping an eye on the indoor climate makes sense. But one or two temperature and humidity sensors can quickly fall short. Add this neat little thermo-hygrometer sensor to your compatible weather station and keep tabs on every corner of your home.FEATURES Measures temperature and humidity For some weather stations with 433 MHz frequency (see compatibility list) Clear display 50m range (in open terrain) SCOPE OF DELIVERY Thermo-hygrometer sensor Instruction manual

Available

£18.99*
BRESSER Thermo-Hygro Sensor 3CH for ClimaTrend MC/TB and most products of the ClimaTrend Series
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.70602009070500 Living room, bathroom, kitchen, wine cellar – there's no shortage of spaces where keeping an eye on the indoor climate makes sense. But one or two temperature and humidity sensors can quickly fall short. Add this neat little thermo-hygrometer sensor to your compatible weather station and keep tabs on every corner of your home. FEATURESTemperature displayHumidity display3 channels settableRC frequency: 433 MHz SCOPE OF DELIVERYRemote sensor

Available

£28.99*
BRESSER Thermo-Hygro Sensor
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15231152327004405 Living room, bathroom, kitchen, cellar – there are many rooms where it can be useful to monitor the indoor climate. If you’re in need of more temperature and humidity sensors for your home, this practical thermo-hygro sensor allows you to expand your existing BRESSER weather station for an additional measurement location. The sensor sends data to your base station over a frequency of 433 MHz at a range of up to 30 metres. What’s more, it also features a clear LCD display so that you can read the measurements directly from the device or use the sensor as a discreet standalone solution. FEATURES Measures the temperature and humidity Clear LCD display Can be used as standalone solution or as an additional sensor for select BRESSER weather stations Wireless transmission range: 30 m Dimensions: 60 x 22 x 60 mm / Weight: 39 g 2x 1.5 V AAA batteries (included) PACKAGE CONTENTS Wireless thermo-hygro sensor 2x AAA batteries (1.5 V) Instruction manual

Available

£13.49*
NATIONAL GEOGRAPHIC Thermo-Hygro Sensor 3CH
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.70074007007500950120095012019501202 Living room, bathroom, kitchen, wine cellar – there's no shortage of spaces where keeping an eye on the indoor climate makes sense. But one or two temperature and humidity sensors can quickly fall short. Add this neat little thermo-hygrometer sensor to your compatible weather station and keep tabs on every corner of your home. FEATURES3 channel available433 MHz transmitting frequencyFoldable standIntegrated hole for easy wall mountingRequires 2x AAA batteries (not included)SCOPE OF DELIVERYThermo/Hygrometer

Available

£17.99*
BRESSER 8-in-1 MeteoTemp JW Wi-Fi Home Weather Station
However unpredictable the weather might be, the BRESSER 8-in-1 MeteoTemp JW Wi-Fi Home Weather Station is always reliable. Its powerful 8-in-1 outdoor sensor gives you highly accurate data recorded right on your doorstep. Thanks to the Wi-Fi connection, you can easily share this information on platforms like ProWeatherLive, Weather Underground, or Weathercloud and access it anytime. With useful features like weather forecast, heat stress index, and alert functions, you’ll always be prepared for whatever the weather throws at you! WBGT and heat stress index – stay safe on hot days When the summer sun is beating down, the WBGT value (Wet Bulb Globe Temperature) and heat stress index help you plan outdoor activities safely. The four warning levels make it quick and easy to see what precautions you need to take for the current conditions. Perfect for athletes, outdoor enthusiasts and as garden weather station. Accurate measurements with the outdoor sensor Get precise data where it matters most. Once positioned correctly, the robust multi-sensor captures outdoor temperature, humidity, wind speed, wind direction, rainfall, UV levels, light intensity, and WBGT reliably. For planning the next 12 to 24 hours, check the graphical weather forecast based on data from the integrated barometer. Additional features make everyday life easier Is it too wet for the garden? Is it too windy for a walk in the park? The high/low-value alerts keep you informed of sudden changes in the weather. You can also monitor long-term trends with the max/min value memory and historical data storage (hourly data for 24 hours). To help maintain a healthy indoor environment, the weather station also includes a built-in thermo-hygrometer. Bring home your reliable weather assistant today with the BRESSER 8-in-1 MeteoTemp JW Wi-Fi Home Weather Station!FEATURES BASE STATIONWeather station with a large 10" (25.4 cm) display for comprehensive weather information Display of exact measurements from the 8-in-1 outdoor sensor (outdoor temperature, humidity, wind speed, wind direction, precipitation, UV levels, light intensity, WBGT) Wi-Fi connection to publish local weather data on online platforms such as Weather Underground, Weathercloud, and ProWeatherLive (3 years of membership included) Heat stress index Weather forecast Air pressure Indoor temperature and humidity Indoor climate comfort indicator Max./min. value memory High/low-value alarm for all relevant measurement parameters Historical memory (hourly for 24 hours) Feels like temperature, heat index, dew point, wind chill factor with trend Automatic time and date setting via the Internet Moon phase, sunrise and sunset times Alarm clock with frost alert function Expandable with up to 7 optional sensors (not included) Power supply: Mains adapter (included), CR2032 backup battery (not included) FEATURES SENSOR Measures temperature, humidity, wind speed, wind direction, precipitation, UV levels, light intensity, and WBGT Waterproof housing High range of up to 150 m Battery-powered: 3 x AA batteries (not included)Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms. SCOPE OF DELIVERY Base station with power supply 8-in-1 multi-sensor Instruction manual

Available

£155.73*
BRESSER 8-in-1 Wi-Fi Professional Home Weather Station Bise
With the BRESSER 8-in-1 Wi-Fi Professional Home Weather Station Bise, you’ll never be caught out by the weather. This sleek Wi-Fi weather station brings all the essentials - from climate to time data - together on a crisp 7.4-inch (18.8 cm) display. And when the mercury rises, the WBGT with heat stress level helps you keep your cool. Thanks to Wi-Fi connectivity, your data is always at hand - whether you’re out and about or taking it easy on the sofa. Your garden, your weather report Why rely on forecasts from miles away when your own outdoor sensor tells the full story? This weather station with outdoor sensor collects temperature, humidity, wind speed, wind direction, rainfall, UV level, light intensity and WBGT straight from your surroundings. With a 150 m range and a weatherproof housing, it’s easy to find the perfect spot for this powerful all-rounder. WBGT - a hot topic worth watching When the heat is on, your body needs extra care. That’s why the WBGT reading (Wet Bulb Globe Temperature) is so valuable. This digital weather station combines air temperature, mean radiant temperature and wet-bulb temperature to show how effectively your body can cool itself. If this last value stays above 35 °C for too long, it’s time to slow down. Whether you’re exercising, gardening or enjoying the outdoors, this professional weather station gives you round-the-clock WBGT values. The heat stress index also lets you know intuitively when to take it easy. Keep the indoors in check too This isn’t just about the great outdoors - the home weather station also keeps tabs on your indoor climate. The built-in thermometer monitors room temperature, the hygrometer measures humidity, and the comfort indicator gives you an instant smiley-face check on your air quality. Meanwhile, the integrated barometer tracks air pressure, warning you when a change in the weather is brewing. All the extras you’d expect from a pro This garden weather station doesn’t stop at the basics. Alongside exact measurements and a graphical forecast, it shows useful values such as feels-like temperature, heat index, dew point and wind chill. The Beaufort scale reveals just how breezy it will feel outdoors, while the max./min. memory tracks trends over time. Customisable high/low alarms alert you to conditions that matter most. And here’s a clever winter perk: when the temperature outside dips below -3°C, the alarm wakes you 30 minutes early so you can take your time on frosty mornings. Meet your all-in-one weather expert - the BRESSER 8-in-1 Wi-Fi Professional Home Weather Station Bise. FEATURES BASE STATION Wi-Fi connection for sharing local weather data on Weathercloud Displays readings from the 8-in-1 solar outdoor sensor (outdoor temperature, humidity, wind speed/direction, rainfall, UV level, light intensity, WBGT) Graphical weather forecast Air pressure Indoor temperature and humidity with comfort indicator Heat stress index Beaufort scale (wind force classification) Weather index (feels-like temperature, heat index, dew point, wind chill) Max./min. memory High/low alarms Automatic time, date and moon phase via internet sync Alarm clock with frost alert WSLink app for easy Wi-Fi setup, data calibration and firmware updates Supports up to 6 additional optional thermo-hygro sensors (not included, see BRESSER accessories) Power supply: USB cable with mains adapter (included), CR2032 backup battery (not included) Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms. FEATURES SENSOR Measures temperature, humidity, wind speed/direction, rainfall, UV level, light intensity and WBGT Weatherproof housing Range up to 150 m Powered by 3 x AA batteries (not included) SCOPE OF DELIVERY Base station with mains adapter 8-in-1 outdoor sensor Instruction manual

Available

£179.00*