BRESSER T2 ring Canon EOS

Capturing beautiful moments with your SLR camera on a photo is sometimes limited when it comes to long distances. Simply connect your SLR camera to your scope with this Photoadapter and benefit from the high magnification of the scope to overcome this problem and capture the smallest details on photo. Inner diameter: 40-54mm Inside dimension Length: 68 - 81mm All you need is your camera, a spotting scope of the Dachstein or Prisch Gen II series and this photo adapter as well as the matching T2 ring for your camera and the fun can start. Suitable for: BRESSER Pirsch Gen II spotting scopes BRESSER Dachstein spotting scopes BRESSER Condor Gen II spotting scopes BRESSER 15-45x60 Spektar spotting scope Spotting scopes of other brands

The BRESSER Telescope Camera Adapter is the connecting piece between your 35 mm DSLR camera and the telescope. The connection to your camera can be achieved with the fitting T2-mount (T2-mount optional). For the focal fotography, you need to unscrew the bottom part of the adapter and attach the camera with the fitting T2-mount directly to the push-on contact. The eyepiece projection is possible when you put an eyepiece into the adapter and tighten the knurled screw. After that, you have to attach the T2-mount and the camera and you are ready to go.FEATURESEyepiece connection diameter: 31.7 mm (1.25")Eyepiece total diameter max. 35mm  SCOPE OF DELIVERYTelescope Camera Adapter 1.25"

The BRESSER camera adapter is the ideal connecting piece between your 35 mm SLR camera or DSLR and your telescope. The adapter is suitable for 1.25" eyepieces with a larger housing diameter of up to 55 mm. Please note, this adapter will be suitable for most Refractors and Cassegrain designs, but may not be suitable for use with all Newtonian designs of telescopes, due to the comparatively short travel of focus in some Newtonians. Please check with us if you'd like further advice regarding your particular telescope.FEATURESvariable camera adapterfor eyepiece projection and prime focusincludes a short prime focus adapter from 1.25" to T2 threadsuitable for 1.25" eyepieces up to 55mm housing diameter barrel diameter: 31.7mm (1.25")WHAT'S INCLUDEDvariable camera adapter

Take pictures with your smartphone through the telescope or microskope? With the Smartphone camera adapter this is now child's play! Simply screw the adapter to the eyepiece and use your smartphone as a camera with a super-telephoto / super-macrophoto lens. It lets you take pictures of distant objects or very small objects as if you were very close.The Deluxe version offers an even more comfortable and secure attachment to the eyepiece. By a rotary movement of the clamping ring 3 clamping jaws are evenly applied to the eyepiece housing and the Smartphone adapter sits firmly and centrically on the eyepiece. The fine adjustment of the height of the smartphone support allows a quick and precise adjustment of the viewing height of the smartphone camera above the eyepiece lens. Good image results are thus guaranteed.  FEATURES Take photos through the telescope Smartphone camera with super telephoto lens Fine Height adjustment of phone support Wide adjustment range for eyepiece housing diameter Fits 31.7mm (1.25") eyepieces For eyepiece housing diameters from 22-38mm SCOPE OF DELIVERY Smartphone holder deluxeLocking ring for the smartphone

An excellent set for exciting planetary and deep-sky observations: the high-quality BRESSER Messier NT-203/1200 Telescope with the modern EXOS-2 PMC-Eight GoTo Mount. The optics impress with the long focal length and very low obstruction, providing an impressively sharp and high-contrast image. This reveals numerous exciting details on Jupiter and Mars. More distant objects like emission nebulae and galaxies also show their structures. The GoTo mount, with its user-friendly ExploreStars App, quickly locates celestial objects and tracks them precisely. During the day, the Sun’s view with the included solar filter is equally fascinating. The Telescope The BRESSER Messier NT-203/1200 Telescope enables observations that were impossible at this price range a few years ago. Thanks to its longer focal length and minimal obstruction, it provides better sharpness and higher contrast for planetary observation. Modern manufacturing technology allows you to track the shadow of Jupiter's moons on the planet itself; the abundance of structures and details on the surface of Jupiter is breathtaking. This reflector telescope excels not only in planetary observation: Discover structures in distant galaxies and be fascinated by the filaments of emission nebulae in the vastness of the Milky Way. With the Messier NT-203/1200, observe the remnants of exploded giant stars and witness the birthplaces of new stars. With the included solar filter, you can explore the Sun during the day and safely observe sunspots, eclipses, or planetary transits. (Warning: Never point the telescope at the Sun without the solar filter!) Be amazed by the wonders of the universe with this exceptionally large device! The Mount The EXPLORE SCIENTIFIC EXOS-2 PMC-Eight GoTo Mount features a modern and highly precise GoTo control system. It consists of a robust Wi-Fi controller unit that provides all the necessary interfaces. The NEMA-11 stepper motors are directly connected to this unit via cable, and there is also a ST-4 compatible autoguider port. Additionally, the control system supports micro-step operation to ensure precise tracking. Intuitive operation via app and graphical star map The ExploreStars app, developed specifically for the PMC-Eight system, impresses with its well-designed and intuitive graphical interface. The current alignment stars for control initialization and all the celestial objects in the database are displayed as a star map with additional text information. All these objects can be easily viewed and selected. Powerful controller unit with Open GoTo for customization At the heart of the controller unit is a fully autonomous 2-channel multi-processor with 8 CPUs and a Wi-Fi Ethernet 10/100 adapter with IP functionality. This allows remote operation via browser, ASCOM, app, or serial connection. With Open GoTo, custom firmware can also be written and uploaded to the controller unit, enabling individual customization of device functions and the creation of your own object lists, etc. Polar finder included The pre-installed polar finder scope enables quick and precise polar alignment, allowing for long exposure times without unwanted star trails. The integrated LED lighting unit further enhances the comfort of using the polar finder. FEATURES TELESCOPE Type: Reflector telescope Mirror diameter: 203 mm / Focal length: 1200 mm / F/6 Maximum useful magnification: 406x Telescope for night and solar observation Optimized for planetary observation Longer focal length and minimal obstruction Provides even sharper image quality and higher contrast Very high-quality Hexafoc focuser with 2.5" free inner diameter Diffraction-limited optics with parabolic primary mirror 8x50 finder with crosshair eyepiece Optimized finder bracket for comfortable viewing Handle for easy transport with integrated camera holder (tripod thread screw) Smartphone adapter for sky navigation included Prism rail with stainless steel clamping surface T2 adapter for SLR cameras (optional T2 ring required) 50.8-to-31.7 mm adapter with integrated T2 adapter (optional T2 ring required); with brass ring clamp FEATURES MOUNT Powerful PMC-8 Open GoTo system User-friendly and graphically appealing ExploreStars OpenGoto app Wi-Fi control via tablet, notebook, or desktop PC with a minimum 7" display and Wi-Fi function (not included) Compatible operating systems: WIN8.1, WIN10/11, iOS, or Android 4.4 and higher Classic control via direction keys or joystick for guiding, centering, correcting, and moving via touchscreen Intuitive 2-star and 3-star alignment for GoTo control initialization Multi-processor microcontroller with 8 CPUs (processor cores) Micro-stepper motors NEMA-11 Highly precise and quiet belt drive ST-4 compatible autoguider port ASCOM drivers available, also supports pulse-guiding Ability to create custom firmware and object lists and load them into the PMC-8 GPS compatible / settings depend on the computer or tablet used Powered by 12-volt DC, with a maximum power consumption of 1.6 amps at full load SCOPE OF DELIVERY Optical tube 26 mm Super Plössl eyepiece (31.7 mm / 1.25") Integrated 31.7 mm and T2 adapter Prism rail with stainless steel clamping surface Adapter for 50.8 mm (2") eyepieces Rotating star map Solar filter Telescope tube rings with handle and camera holder 8x50 finderscope Smartphone adapter for navigation Astronomy PC software Stellarium (via download) EXOS2-GT mount with Open GoTo PMC-8 Stainless steel tripod with built-in bubble level Two counterweights, 4.5 kg each Polar finder with lighting unit 12-volt / 2-amp power supply ExploreStars app (via software download) Instruction manual

Take photos with your smartphone through your spotting scope, microscope or telescope. It’s a child's play with the BRESSER Universal Smartphone Adapter. Simply attach the adapter to the eyepiece holder of your optical device and then use all together as a telephoto lens for your smartphone camera. Now you can shoot distant objects as if they were up close or take photos through a microscope.FEATURESuniversal adapter to assemble the smartphone to a spotting scope or telescopefor eyepieces up to 68 mm diameterfor smartphones with a width of 50-88mmSCOPE OF DELIVERYSmartphone adapterManual

The BRESSER Telescope Camera Adapter is the connecting piece between your 35 mm DSLR camera and the telescope. The connection to your camera can be achieved with the fitting T2-mount (T2-mount optional). For the focal fotography, you need to unscrew the bottom part of the adapter and attach the camera with the fitting T2-mount directly to the push-on contact. The eyepiece projection is possible when you put an eyepiece into the adapter and tighten the knurled screw. After that, you have to attach the T2-mount and the camera and you are ready to go.FEATURESEyepiece connection diameter: 31.7 mm (1.25")Eyepiece total diameter max. 35mm  SCOPE OF DELIVERYTelescope Camera Adapter 1.25"

Take pictures with your smartphone through the telescope or microskope? With the Smartphone camera adapter this is now child's play! Simply screw the adapter to the eyepiece and use your smartphone as a camera with a super-telephoto / super-macrophoto lens. It lets you take pictures of distant objects or very small objects as if you were very close.The Deluxe version offers an even more comfortable and secure attachment to the eyepiece. By a rotary movement of the clamping ring 3 clamping jaws are evenly applied to the eyepiece housing and the Smartphone adapter sits firmly and centrically on the eyepiece. The fine adjustment of the height of the smartphone support allows a quick and precise adjustment of the viewing height of the smartphone camera above the eyepiece lens. Good image results are thus guaranteed.  FEATURES Take photos through the telescope Smartphone camera with super telephoto lens Fine Height adjustment of phone support Wide adjustment range for eyepiece housing diameter Fits 31.7mm (1.25") eyepieces For eyepiece housing diameters from 22-38mm SCOPE OF DELIVERY Smartphone holder deluxeLocking ring for the smartphone

Whether you’re out for a walk, a hike, or at a sporting event, the BRESSER 10x42 Roof Prism Monocular brings you closer to the action. With its 10x magnification, a deer or a vibrant kingfisher 1,000 metres away appears as if it’s just 100 metres in front of you. Perfect for admiring nature without disturbing it. The 42 mm objective lens ensures plenty of light for clear, detailed views, and thanks to its super-compact size, the monocular slips easily into any jacket pocket – ready whenever you are. Your go-to companion – the 10x42 monocular Struggling to see clearly without your glasses? Don’t worry – the twist-up eyecup makes the monocular ideal for glasses wearers. Just twist it down, and you’ll get the perfect distance between your eye and the lens to enjoy the full 101-metre field of view at 1,000 metres, even while wearing glasses. The optics deliver impressive clarity, thanks to Bk-7 glass (Borosilicate Crown Glass) and a multi-layer coating. And because the weather can be unpredictable, the monocular is completely waterproof. From light drizzle to heavy downpours, its sealed housing keeps moisture out, while the rugged, water-resistant rubber armour gives you a firm grip at all times. See the world in greater detail with the waterproof BRESSER 10x42 Roof Prism Monocular, your trusty companion for any adventure. FEATURESPerfect for travellers, hikers, and wildlife enthusiasts 10x magnification 42 mm objective lens Field of view: 101 m / 1,000 m Waterproof design Lightweight and compact Twist-up eyecup for glasses wearers Optical glass: Bk-7 (Borosilicate Crown Glass) Multi-layer lens coating SCOPE OF DELIVERYMonocular Carrying strap Protective case Lens caps Cleaning cloth Instruction manual

Capturing beautiful moments with your SLR camera on a photo is sometimes limited when it comes to long distances. Simply connect your SLR camera to your scope with this Photoadapter and benefit from the high magnification of the scope to overcome this problem and capture the smallest details on photo. Inner diameter: 40-54mm Inside dimension Length: 68 - 81mm All you need is your camera, a spotting scope of the Dachstein or Prisch Gen II series and this photo adapter as well as the matching T2 ring for your camera and the fun can start. Suitable for: BRESSER Pirsch Gen II spotting scopes BRESSER Dachstein spotting scopes BRESSER Condor Gen II spotting scopes BRESSER 15-45x60 Spektar spotting scope Spotting scopes of other brands

High-quality dissecting tool set for amateur and professional purposes. Made in Germany! No matter if amateur microscoper or professional - working with inferior tools is unsatisfying. For that reason, we offer these dissecting tools to you. They are made from Solingen steel and meet the highest quality demands. Accessories • 1 Spatula • 1 Scalpel • 1 Tweezer • 1 Scissor • 1 Slice catcher • 2 Preparation Needles • Imitation leather case

The BRESSER MikroCam SP microscope cameras help to make photos and videos with a microscope very easy.The modern CMOS sensors  give brilliant colors with very low noise and is the perfect choice for any application where true natural colors are important. The included imaging software has multiple adjustments for the capture of still images and videos. The integrated measuring* routine allows for a measurement in the camera live image. The software can be operated in the following languages: German, English, French, Polish, Russian, Turkish, Chinese. The camera housing includes the c-mount adapter thread. For use with 23,2mm adaptations, we recommend the optional, variable 0,5x reducer (item no. 5914005). For special applications the camera can also be mounted using the 1/4” camera tripod thread. FEATURES2048 x 1536 Pixel Sensor 5,28 mm x 3,84 mm (1/2.8'') Pixel: 2,5 x 2,5 µmHigh quality metal housingNumerous software functions, e.g. measurement, focus-stacking (combines several images for more depth of focus), mosaic (for larger image fields)Image and video capture, incl. time lapse functionGood compatibility with different microscopes SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 CPU from the 6nd generation orAMD Ryzen CPUOptical Disk Drive or internet connection for software downloadUSB 2.0 SCOPE OF DELIVERYCamera head USB 2.0 cable (approx. 1.8 m)Adapters for 23.2 mm, 30 mm and 30.5 mm eyepiece holdersCapture and image processing software

The BRESSER Photo Adapter 30.5 mm / C-Mount is designed to establish a connection between the 0.5x Reducing lens (Art.-No. 5914005) and the C-Mount MikroCam Adapter (Art.-No. 5942101). Thus a larger image field as well as a higher light intensity can be achieved with a MikroCam. FEATURESC-Mount Female ThreadPlug-in Mount: 23.2 mmSuitable for 30.5 mm Eyepiece Holder SCOPE OF DELIVERYPhoto Adapter 30.5 mm / C-Mount