BRESSER Super Ploessl Eyepiece (1.25") 26mm

BRESSER 40mm Plössl Eyepiece 1,25" (31,7mm) Since years a well known and approved Plössl eyepiece. Ideal to improve the performance of your telescopes for a low budget price. All the BRESSER Plössl eyepieces provide sharp and high-contrast images because of the 4-lens design. All lenses have fully-multicoated surfaces which prevents reflections efficiently. Every eyepiece is equipped with a foldable rubber eyecup to avoid straylight from the sides and the inner eyepiece shaft is carefully blackened as well. Housing and eyepiece shaft are completely made from metal - no plastic is used. Filter thread for use with colour- and nebular filters is also available. All these Plössl eyepieces offer a much better image quality than all the very simple made Kellner and Huygens eyepieces. FEATURES Focal length: 40 mm Field of view: 46° Lens-Design: 4 lenses in 2 groups , fully-multicoated Housing material: completely made from metal Rubber eyecup: YES, foldable Filter thread: YES Storage: Twist-pack SCOPE OF DELIVERY BRESSER Plössl eyepiece with rubber eyecup Twist-pack

With the usage of barlow lenses, you can extend the equivalent focal length of telescopes and hence increase the magnification of your observed targets. Subsequently, you can use lower power eyepieces in Barlows to act as much more powerful eyepieces, but retain the larger ocular size and more comfortable viewing that comes with lower power eyepiece designs.Due to their two lens design, these Barlow lenses provide a brilliant image quality for the whole visual field and are suitable for observations and photography.  The black coloured Barlow element cell in this BRESSER Barlow Lens 2x 31.8mm/1.25," can be unscrewed and has the same thread as 1.25" filters, allowing it to be mounted in 1.25" eyepieces, t-adapters and other accessories, giving you flexibility of use and the ability to vary magnification in different accessories.  For instance, the black Barlow cell screwed into the average length nosepiece of a standard push fit t-adapter will give around 1.6x magnification on an attached DSLR.  This can be very useful when trying to get to photographic focus with some Newtonians and Solar Telescopes, which lack the necessary amount of in focus travel to get a camera to a prime focus position.FEATURESsuitable for observations and photographydoubling of the focal lengthtwo lens designfully multi-coatedWHAT'S INCLUDEDBarlow lens (1pc)

Take pictures with your smartphone through the telescope or microskope? With the Smartphone camera adapter this is now child's play! Simply screw the adapter to the eyepiece and use your smartphone as a camera with a super-telephoto / super-macrophoto lens. It lets you take pictures of distant objects or very small objects as if you were very close.The Deluxe version offers an even more comfortable and secure attachment to the eyepiece. By a rotary movement of the clamping ring 3 clamping jaws are evenly applied to the eyepiece housing and the Smartphone adapter sits firmly and centrically on the eyepiece. The fine adjustment of the height of the smartphone support allows a quick and precise adjustment of the viewing height of the smartphone camera above the eyepiece lens. Good image results are thus guaranteed.  FEATURES Take photos through the telescope Smartphone camera with super telephoto lens Fine Height adjustment of phone support Wide adjustment range for eyepiece housing diameter Fits 31.7mm (1.25") eyepieces For eyepiece housing diameters from 22-38mm SCOPE OF DELIVERY Smartphone holder deluxeLocking ring for the smartphone

One of the most important obstacles for the exploration of the night sky is the brightening of the night sky by artificial lights, such as streetlights. The night sky is not really dark in the vicinity of towns or cities, which reduces the visibility of objects beyond the solar systems enormously. Depending on the type of the celestial object it is possible to increase the contrast dramatically by blocking the annoying artificial light. The EXPLORE SCIENTIFIC UHC filter uses a characteristic property of the so called emission nebulae. Those objects glow in special colours, their emission lines. Those emission lines are linked to chemical elements - in this case hydrogen at 486nm and 656nm, plus oxygen at 496nm and 501nm. The Explore Scientific UHC nebula filter blocks all other colours (and thereby nearly all of the artificial light) and only the emission line of the hydrogen and oxygen can pass the filter. The result is astonishing: suddenly nebulae are visible at locations that were completely empty without filters. In suburban skies for example the Owl-nebula M97, the Veil-nebula NGC6992 or even the bright Dumbell-nebula M27 are not clearly visible. By using this filter you can see the nebulae and their structures without problems. A must for every visual observer. The EXPLORE SCIENTIFIC nebula filters come with a individual test certificate - your guarantee to receive a premium filter.FEATURESenables the observation of emission nebulaeblocks almost the entire artificial lightonly the two emission lines of hydrogen and oxygen passes the filterWHAT'S INCLUDED1x 1.25" UHC nebula filter

BRESSER Eyepiece K 10mm 1.25" Category: Replacement part for the Carbon Look Telescope series Description: The BRESSER Eyepiece K 10mm 1.25" is a quality eyepiece with a focal length of 10mm, ideal for medium magnifications. The fitting diameter is 1.25 inches (31.7mm). Suitable as a replacement part for the BRESSER Carbon Look Telescope series. The lens surfaces are coated to suppress reflections. The reversible rubber eyecup ensures comfortable observations.

With the 3-piece lens cleaning set you not only clean camera or binocular lenses, but also spectacles glasses and displays and screens of smartphones, laptops, tablets, etc. thoroughly and safely. When cleaning high quality optical lenses, you have to be very careful. After all, it would be very annoying to successfully remove the dust but leave a scratch behind. With the lens cleaning pen you can safely clean optical and coated glass. With the brush on one side you can remove coarser dirt before polishing the lenses with the other side. Just blow away fluff with the bellows. FEATURES complete set for safe cleaning of camera lenses bellows for removing coarse dirt particles and fluff without scratching the lens lint-free microfibre cloth approx. 14,5x14,5cm lens cleaning pencil for safe cleaning of optical and coated glass SCOPE OF DELIVERY 1x bellows 1x lens cleaning pen 1x microfiber cloth

NEW - now including a high-quality aperture solar-filter for safe observation of sunspots, eclipses and planet transits. Great telescope for night and solar observation. The BRESSER NANO NT-114/500 telescope is the perfect combination of a large Newtonian mirror with a short focal length. The advanced observer who has discovered that light gathering is a more important factor than magnification, will especially appreciate the large 114 mm mirror. Enough light can be reflected into the eyepiece to be able to see even the most distant objects in our solar system at great detail. Suitable also for traveling and to observe large open star clusterns and the milky way. The telescope arrives with a wide array of accessories and almost pre-assembled - observation can start immediately. The BRESSER NANO is a light-to-medium-duty alt-azimuth mount with tripod designed to quickly and easily accept small to medium sized refractors, such as the AR-90s, AR-102s, AR-102xs and the ED-80 APO. Lightweight, fast Newtonians will also match up nicely with the BRESSER NANO AZ mount. As long as your telescope does not exceed 8 pounds and has a Vixen-Style Universal Dovetail bar for mounting the telescope to the mount head, you are good to go. The stainless steel tripod that comes standard with the BRESSER NANO AZ mount has adjustable legs and a wide foot print, which makes the tripod more stable. Spreader vanes with an acessory tray locks against the inside of the legs to secure the tripod even further, and keep vibrations to a minimum. Do you want to capture what you see ? With the included smartphone holder bracket you can use your smartphone to easily take colour pictures of celestial objects - like through a telephoto lens ! With the included camera adapter ring T2 you can also attach your DSLR or CCD camera direct to the focuser in order to capture high resolution pictures of the Moon by using short exposure times.Please note: Reflector telescopes with optical design “Newton” are very good for astronomical observing at the starry night sky. But these telescopes are not well usable for observing landscape and nature during daylight. Therefore we suggest BRESSER refractor (lens) telescopes for landscape and nature observing.FEATURESHigh quality and compact reflector telescope Richfield telescope also for traveling Easy to use BRESSER NANO AZ Mount Telescope arrives almost pre-assembled Large 40mm secondary mirrorDiffraction limitted optics for ideal sharpness and contrastMagnification with supplied accessories: 20x, (max. suggested: 228x) Focal distance, aperture ratio: 500mm, f/4.4 Stainless steel field tripod Smartphone holder bracket included - for taking pictures Eyepiece diameter: 31.7mm (1.25") Telescope for night and solar observationSCOPE OF DELIVERYOptical tube Messier NT-114/500 BRESSER NANO alt/azimuth mount Stainless steel tripod with accessory tray Eyepiece: BRESSER Super Plössl 26mm Red dot finder Aperture solar-filterSmartphone camera adapter Camera-Adapter Ring T2 (M42x0.75mm) Star chart software & rotatable star-map

A very good diagonal mirror for telescopes with 2" focuser and for the BRESSER Messier telescopes with a 2.5"- HEX focuser. Enables the use of eyepieces and accessories with 2" barrel, so that a wider field of view can be reached. A larger light beam and a comfortable observation position is achieved by this 2 inch zenith mirror. Especially for use with refractors and for zenith observations a useful accessory.  The clamping ring is made of brass, so there will be no scratch marks on your high-quality eyepiece. The precise clamping is another advantage. The BRESSER 2" Diagonal Mirror is completely made of metal and has a very accurate flat mirror. The dielectrical coating delivers a 93% reflectance and is very durable against enviromental influences. FEATURES Star diagonal mirror for focuser with 2" barrel High quailty flat mirror Dielectrical mirror coating delivers a 93% reflectance Very durable against enviromental influencesEyepiece adapter 1.25/2.0 inch includedBrass eyepiece clamping ring Housing completely made of metal Dust caps included SCOPE OF DELIVERY diagonal mirroreyepice adapter 1.25/2.0 inch dust caps

This classic reflector telescope is equipped with a 76 mm primary mirror and comes with all the accessories that you need for observing the night sky, such as a tripod, eyepieces and finder scope. Discover countless moon craters and marvel at the stunning details of the large planets – at an affordable price tag! The telescope also features an equatorial mount that can be aligned with the polar star, allowing you to track the stars by hand with a control knob. Please note that Newtonian reflecting telescopes are ideal for astronomical observations, but are not suitable for observing wildlife and landscapes. For wildlife and landscape observations, we recommend refracting telescopes.FEATURESEntry-level reflector telescopeDiameter: 76 mm Focal length: 700 mm Magnification: 28x-262x (max. recommended: 152x)Mount: EquatorialFinder scope: 5x24PACKAGE CONTENTSTelescopeMount and tripod3 eyepieces (25 / 12.5 / 8 mm)Finder scopeSmartphone holder1.5x erecting lens3x Barlow lensMoon filter

BRESSER Barlow Lens 2x 1.25”Category: Spare Part for Carbon Look Telescope Series Description: The BRESSER Barlow Lens with 2x magnification and a barrel diameter of 1.25 inches (31.7mm) enables double magnification for more detail. Suitable as an accessory and spare part for the BRESSER Carbon Look Telescope series.