BRESSER Stereo Microscope Advance ICD 10x-160x Zoom with MikroCam MINI Full HD HDMI Microscope Camera
Practical set consisting of microscope and microscope camera
- Practical set consisting of microscope and microscope camera
- Trinocular incident/transmitted light microscope
- 1x-4x stereo zoom objective; magnification: 10x-160x
- Working distance: 28-80 mm; object height up to 22 cm
- Affordable HDMI camera e.g. for presentations or teaching
- Sony IMX307 1/2.8" sensor with Full HD resolution (1920 x 1080)
- C-mount thread, also compatible with reduction optics
- Camera control via USB mouse, no PC required
- Compatible with USB sticks and SD card readers (max. 512 GB)
£1,016.90*
Available, delivery time: 3-5 working days
Product number:
5684170
EAN:
4007922103600
WEEE-Reg.-Nr.:
DE 34323861
Product information "BRESSER Stereo Microscope Advance ICD 10x-160x Zoom with MikroCam MINI Full HD HDMI Microscope Camera"
High-quality complete set for precise analyses and sharp image transmission:
This powerful set combines the Advance ICD stereo microscope with the advanced MikroCam Mini HDMI, as well as a 0.5x reduction lens. It is ideally suited for detailed observations and documenting work results.
The microscope in detail
The BRESSER Advance ICD is suitable as a zoom stereo loupe for a wide range of observations. Objects appear three-dimensional and lifelike through the Greenough design with two inclined objectives. The 3D image also makes working with tools (e.g. preparing, dissecting, soldering) much easier.
The zoom allows stepless adjustment of magnification with a zoom factor of 4.0 (1x-4x). Only minimal refocusing is needed when zooming. For this, the Advance ICD has a coaxial focus drive with coarse and fine adjustment. This allows particularly sensitive focusing, especially at high magnifications or for photography. The fine focus is also a great aid for focus stacking, e.g. with our MikroCam cameras (optional).
The interpupillary distance is individually adjustable. Both eyepiece holders have a dioptre adjustment, allowing differences in visual acuity of up to approx. 8 dpt between the left and right eye to be compensated. The 10x widefield eyepieces with a field number of 22 are equipped with removable rubber eyecups. The microscope head can be adjusted very far in height on the stand rod. This allows very large objects up to an object height of approx. 22 cm to be observed.
The bright LED incident light illumination is adjustable in its tilt. The particularly even and bright LED transmitted light illumination provides a homogeneous background for transmitted light specimens. The illumination can be set with a toggle switch, so incident and transmitted light can be used separately or together depending on the type of sample. You can conveniently control the brightness with the dimmer. The bright LED illumination produces no heat, so living samples can be safely observed over a longer period. A low-power 5V power adapter (with Euro and UK adapter) is used to power the long-lasting LED illumination. The power cable has a USB connector on one side.
The Advance ICD can be used in many ways due to the large magnification range. In addition to the included 2x auxiliary lens, further additional objectives are available, allowing you to vary and adapt the magnification range, working distance and depth of field even further to your requirements.
These magnifications are possible in the basic configuration:
10x eyepieces: 10x - 40x
10x eyepieces plus 2x auxiliary lens: 20x - 80x
20x eyepieces: 20x - 80x
20x eyepieces plus 2x auxiliary lens: 80x - 160x
(further magnifications possible with optional additional objectives or eyepiece magnifications)
The third tube is designed for connecting a camera. A switch deflects the image from the left objective to the camera tube. Various adapters and reduction optics are available for C-mount cameras and DSLR or system cameras, so practically all cameras with removable lenses can be connected.
APPLICATION AREAS
MICROSCOPE FEATURES
MICROSCOPE SCOPE OF DELIVERY
The microscope camera in detail
The MikroCam MINI Full HD HDMI is a particularly compact HDMI camera. A PC or laptop is not required to operate the camera; you can simply connect the MikroCam MINI Full HD HDMI to an existing monitor, TV, projector or smartboard. This makes it ideal for use in teaching. Alternatively, a small BRESSER monitor can also be mounted directly on the camera (see item no. 5914120).
The HDMI connection is easy to make and the camera is ready for use immediately. No software installation, PC setup etc. is necessary. Thanks to the lossless data transmission, very good image quality is achieved and the image always has a consistently high frame rate of 60 fps and is delay-free. This is particularly advantageous when a microscope workstation is to be digitised, e.g. in quality control or production.
The supplied USB mouse is connected for control. This allows the three menus (camera settings, measurement* and display) to be controlled.
*To perform measurements with the camera, a calibration slide is required (e.g. item no.: 5916710 or 5916720).
The camera is also very suitable for presentations, as it operates in automatic mode when the mouse is not connected. The menus and mouse pointer are then not visible.
Please note that a direct PC connection is not possible. An HDMI to USB video capture device is required for this. The USB port is only for controlling the camera with the mouse.
MICROSCOPE CAMERA FEATURES
The microscope in detail
The BRESSER Advance ICD is suitable as a zoom stereo loupe for a wide range of observations. Objects appear three-dimensional and lifelike through the Greenough design with two inclined objectives. The 3D image also makes working with tools (e.g. preparing, dissecting, soldering) much easier.
The zoom allows stepless adjustment of magnification with a zoom factor of 4.0 (1x-4x). Only minimal refocusing is needed when zooming. For this, the Advance ICD has a coaxial focus drive with coarse and fine adjustment. This allows particularly sensitive focusing, especially at high magnifications or for photography. The fine focus is also a great aid for focus stacking, e.g. with our MikroCam cameras (optional).
The interpupillary distance is individually adjustable. Both eyepiece holders have a dioptre adjustment, allowing differences in visual acuity of up to approx. 8 dpt between the left and right eye to be compensated. The 10x widefield eyepieces with a field number of 22 are equipped with removable rubber eyecups. The microscope head can be adjusted very far in height on the stand rod. This allows very large objects up to an object height of approx. 22 cm to be observed.
The bright LED incident light illumination is adjustable in its tilt. The particularly even and bright LED transmitted light illumination provides a homogeneous background for transmitted light specimens. The illumination can be set with a toggle switch, so incident and transmitted light can be used separately or together depending on the type of sample. You can conveniently control the brightness with the dimmer. The bright LED illumination produces no heat, so living samples can be safely observed over a longer period. A low-power 5V power adapter (with Euro and UK adapter) is used to power the long-lasting LED illumination. The power cable has a USB connector on one side.
The Advance ICD can be used in many ways due to the large magnification range. In addition to the included 2x auxiliary lens, further additional objectives are available, allowing you to vary and adapt the magnification range, working distance and depth of field even further to your requirements.
These magnifications are possible in the basic configuration:
10x eyepieces: 10x - 40x
10x eyepieces plus 2x auxiliary lens: 20x - 80x
20x eyepieces: 20x - 80x
20x eyepieces plus 2x auxiliary lens: 80x - 160x
(further magnifications possible with optional additional objectives or eyepiece magnifications)
The third tube is designed for connecting a camera. A switch deflects the image from the left objective to the camera tube. Various adapters and reduction optics are available for C-mount cameras and DSLR or system cameras, so practically all cameras with removable lenses can be connected.
APPLICATION AREAS
- Quality control in industry
- Material testing
- Laboratory
- Botany, horticulture, agriculture
- Hydrology, aquaculture, aquaristics, marine biology
- Insects, entomology, pest control
- Plant physiology, raw materials, medicinal drugs
- School, teaching
MICROSCOPE FEATURES
- Trinocular microscope head for visual observation and camera use with switch
- Compatible, among others, with BRESSER MikroCams (optional)
- 1x-4x stereo zoom objective
- 2x auxiliary lens (doubles magnification through eyepieces and zoom objective)
- Dioptre compensation in both eyepiece holders
- Adjustable interpupillary distance (52 - 72 mm)
- Bright LED illumination (incident/transmitted light)
- 2 different object plates for optimal contrast to the object
- Observation of three-dimensional objects up to approx. 22 cm height possible
- Power adapter Euro/UK (5V / 1,000 mA) with USB connection
- Robust design with heavy base
- 2 pairs of widefield eyepieces included
MICROSCOPE SCOPE OF DELIVERY
- Microscope
- 2 pairs of widefield eyepieces (WF 10x / WF 20x)
- 2x auxiliary lens (1 piece)
- 1 pair of rubber eyecups
- Plastic object plate 94 mm (black/white)
- Glass object plate 94 mm (matte)
- Power adapter Euro/UK (5V / 1,000 mA)
- Dust cover
- Operating instructions
The microscope camera in detail
The MikroCam MINI Full HD HDMI is a particularly compact HDMI camera. A PC or laptop is not required to operate the camera; you can simply connect the MikroCam MINI Full HD HDMI to an existing monitor, TV, projector or smartboard. This makes it ideal for use in teaching. Alternatively, a small BRESSER monitor can also be mounted directly on the camera (see item no. 5914120).
The HDMI connection is easy to make and the camera is ready for use immediately. No software installation, PC setup etc. is necessary. Thanks to the lossless data transmission, very good image quality is achieved and the image always has a consistently high frame rate of 60 fps and is delay-free. This is particularly advantageous when a microscope workstation is to be digitised, e.g. in quality control or production.
The supplied USB mouse is connected for control. This allows the three menus (camera settings, measurement* and display) to be controlled.
*To perform measurements with the camera, a calibration slide is required (e.g. item no.: 5916710 or 5916720).
The camera is also very suitable for presentations, as it operates in automatic mode when the mouse is not connected. The menus and mouse pointer are then not visible.
Please note that a direct PC connection is not possible. An HDMI to USB video capture device is required for this. The USB port is only for controlling the camera with the mouse.
MICROSCOPE CAMERA FEATURES
- HDMI connection for direct connection to a monitor, TV, projector or smartboard
- C-mount thread for easy adaptability to various microscopes (manufacturer-independent)
- Compatible with USB sticks or SD card readers (max. storage size: 512 GB)
- No PC/laptop necessary
- MikroCam MINI Full HD HDMI with C-mount connection
- Power supply (12 V / 2A)
- USB mouse
- HDMI cable (approx. 1.5 m)
| Active area: | 5.57 x 3.13 mm |
|---|---|
| Body material: | Aluminium , Metal , Plastic |
| Colour: | white |
| Continuous magnification: | Yes |
| Data transmission: | HDMI |
| Dimmer: | Dimmable lighting |
| Diopter setting: | Yes |
| Eyecups: | Rubber eyecups, fixed |
| Eyepiece Barrel Diameter (mm): | 30.5 |
| Field of application [Microscopes]: | Biology , Botany , Coins , Education , Entomology , Gemology , Laboratory , Mineralogy , Nondestructive testing , Research |
| Focusing system: | Coarse and fine focuser |
| Frame rate: | 60 fps |
| Image File Formats: | jpg |
| Interfaces: | HDMI , SD , USB |
| Interpupilar distance max. (mm): | 72 |
| Interpupilar distance min. (mm): | 52 |
| Laser class/type: | Class 1 (harmless to the eyes) |
| Lighting 5): | Incident and transmitted light |
| Magnification from: | 10 |
| Magnification up to: | 160 |
| Material: | Metal |
| Mechanical stage: | Optional |
| Mounting option: | C-Mount , Tripod Thread |
| Navigation: | Mouse |
| Net Weight total (incl. accessories) (g): | 5130 |
| Object height max. (mm): | 220 |
| Object stage features: | 2 Object plates, exchangeable |
| Optical design: | Stereo |
| Pixel size (µm): | 2,9 x 2,9 |
| Power supply 1): | 5V/1A power adapter + 5V USB |
| Power supply unit included: | Yes |
| Product Family [Microscopes]: | Incident and transmitted light microscope |
| Product series: | Advance |
| Removable storage 2): | SD , SDHC (= 64 GB) |
| Resolution: | 1920 x 1080 |
| Sensor type: | CMOS |
| Target Group [Microscopes]: | Advanced Amateurs , Beginners , Experts |
| Total height (mm): | 465 |
| Total length (mm): | 225 |
| Total width (mm): | 148 |
| Transportability: | limited |
| Type of illumination: | Dimmable , LED |
| Video Formats: | MP4 (Codec: H.264) |
| View: | Trinocular |
| Working distance (approx., mm): | 28-80 |
Login
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- DANGER! Sharp-edged and pointed tools are often used with this device. Therefore, store the device and all accessories and tools in a place inaccessible to children. There is a RISK OF INJURY!
- In case of defects, contact your retailer or the manufacturer.
- Disconnect damaged devices from the power supply or do not put them back into operation.
- Small parts can be swallowed. Keep small parts out of reach of children, allow children to work with the device only under supervision.
- Keep packaging materials away from children. There is a risk of suffocation.
- There is a risk of pinching or abrasions from mechanical components like racks or drives.
- Do not look directly into the light source. Adjust the brightness of the light source with the dimmer to a comfortable level.
- Lay network or USB cables securely. There is a risk of tripping or property damage.
