Skip to main content Skip to search Skip to main navigation

BRESSER Smart Home Weather Station 4CAST SG

Help & Service for your product

Here you will find quick help, answers to frequently asked questions, and direct access to support.

Service Portal

Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.

Service Portal

Sensor Form

In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.

Sensor Form

Ratgeber & Tipps

FAQ - Frequently Asked Questions

The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
  1. Remove all batteries from the base station and the outdoor sensor.
  2. Wait at least 3–10 minutes.
  3. Insert the batteries into the base station.
  4. Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.

Tips:
  • If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
  • Do not place the base station near other electronic devices (this may interfere with reception).
  • If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
  • Briefly press the reset button on the back with a pen
  • If necessary, place the station closer to a window, as reception inside buildings may be limited

Product and safety instructions


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • WARNING! Do not swallow the battery, risk of chemical burns. This product contains a button cell/button battery. If swallowed, it can cause severe internal chemical burns within just 2 hours and may lead to death. If the battery compartment cannot be securely closed, do not use the product and keep it away from children.
  • If you believe batteries may have been swallowed or are in any body part, seek immediate medical attention. When disposing of this product, make sure it is collected separately if required.
  • The AC/DC adapter serves as a disconnecting device. - The device’s AC/DC adapter should not be covered OR must be easily accessible during normal use. - To completely interrupt the power supply, the AC/DC adapter of the device must be disconnected from the network.
  • CAUTION - There is a risk of explosion if the battery is not replaced correctly. Replace only with the same or an equivalent type. The battery should not be exposed to extreme temperatures, low air pressure, or high altitudes during use, storage, or transport.
  • Replacing a battery with an incorrect type can lead to an explosion or leakage of flammable liquid or gas. Do not throw the battery into fire or a hot oven, or mechanically crush or cut it. This can lead to an explosion.
  • The presence of a battery in an environment with extremely high temperatures can cause an explosion or leakage of flammable liquids or gases. - A battery exposed to extremely low air pressure can explode, or there may be leakage of flammable liquids or gases.
Skip product gallery

Compatible Sensors

BRESSER Thermo-Hygro Sensor 433 MHz
Living room, bedroom and children's room, kitchen and of course the bathroom - all benefit from a regular room climate check to ensure optimal comfort. So, enhance your weather station with this BRESSER Thermo-Hygro Sensor, allowing you to monitor conditions at an additional location. The sensor sends data over a significant distance of up to 80 meters, instantly displaying it on your base station's screen. Wondering if it's really that warm? The sensor includes an LCD display for immediate, on-site verification of current readings. This feature also enables this temperature and humidity meter to function as a standalone thermo-hygrometer. This device is compatible with weather stations with the following article numbers: 14895 14993 14998 15004 15131 15243 15298 15405 15406 15407 15408 15409 15418 15479 15496 15652 16206 16207 7000012CM3000 7000012GYE000 7000013 7000023 7000027 7000029 7000030 7000060 7004200 7004200GYE000 7004200HZI000 7004200MGU000 7004200QT5000 7004210 7004330 7004340 7004350 7004360 7004370 7004380 7006500 7006510 7006511 7007201 7007350 7007402 7007403 7007404 7007511 7007520 7007610 7007620 9070600 9070700 9070710 9604101 9604200 9604210 7000012000000 7004200000000 FEATURES Measures temperature and humidity Easy-to-read LCD display Functions as an independent solution, or as a replacement or supplementary sensor for select BRESSER weather stations Maximum range of up to 80 meters IP Protection Class: IP44Frequency: 433 MHz Dimensions: 71 x 65 x 23 mm / weight: 44 g Powered by 2x 1.5V AAA batteries (not included) SCOPE OF DELIVERY Thermo-Hygro Sensor Instruction manual

Available

£23.99*
Skip product gallery

Customers also bought

BRESSER Thermo-Hygro Sensor 433 MHz
Living room, bedroom and children's room, kitchen and of course the bathroom - all benefit from a regular room climate check to ensure optimal comfort. So, enhance your weather station with this BRESSER Thermo-Hygro Sensor, allowing you to monitor conditions at an additional location. The sensor sends data over a significant distance of up to 80 meters, instantly displaying it on your base station's screen. Wondering if it's really that warm? The sensor includes an LCD display for immediate, on-site verification of current readings. This feature also enables this temperature and humidity meter to function as a standalone thermo-hygrometer. This device is compatible with weather stations with the following article numbers: 14895 14993 14998 15004 15131 15243 15298 15405 15406 15407 15408 15409 15418 15479 15496 15652 16206 16207 7000012CM3000 7000012GYE000 7000013 7000023 7000027 7000029 7000030 7000060 7004200 7004200GYE000 7004200HZI000 7004200MGU000 7004200QT5000 7004210 7004330 7004340 7004350 7004360 7004370 7004380 7006500 7006510 7006511 7007201 7007350 7007402 7007403 7007404 7007511 7007520 7007610 7007620 9070600 9070700 9070710 9604101 9604200 9604210 7000012000000 7004200000000 FEATURES Measures temperature and humidity Easy-to-read LCD display Functions as an independent solution, or as a replacement or supplementary sensor for select BRESSER weather stations Maximum range of up to 80 meters IP Protection Class: IP44Frequency: 433 MHz Dimensions: 71 x 65 x 23 mm / weight: 44 g Powered by 2x 1.5V AAA batteries (not included) SCOPE OF DELIVERY Thermo-Hygro Sensor Instruction manual

Available

£23.99*
BRESSER Precision Thermo-Hygro Sensor
This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre. This device is compatible with weather stations with the following article numbers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emperature measurement function Humidity measurement function 7 available channels Built-in display, can also be used as a standalone solution without a weather centre Temperature range: -20 ~ 60℃ Wireless frequency: 868 MHz Ultra-long range of up to 150 m Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Outdoor sensor Instruction manual

Available

£33.99*
BRESSER Thermo-Hygro Sensor 3CH - Suitable for BRESSER Thermo-Hygrometer
Living room, bathroom, kitchen, wine cellar – there's no shortage of spaces where keeping an eye on the indoor climate makes sense. But one or two temperature and humidity sensors can quickly fall short. Add this neat little thermo-hygrometer sensor to your compatible weather station and keep tabs on every corner of your home.This device is compatible with weather stations with the following article numbers: 70074007007500950120095012019501202FEATURES3 channel available433 MHz transmitting frequencyFoldable standIntegrated hole for easy wall mountingRequires 2x AAA batteries (not included) SCOPE OF DELIVERYThermo/Hygrometer

Available

£18.99*
Skip product gallery

Customers also viewed

BRESSER Home Weather Station Cumulus
With the BRESSER Home Weather Station Cumulus, you'll always be ahead of the weather. It keeps you reliably informed with all the essential weather data for both indoors and out. Temperature, humidity, barometric pressure - everything's displayed clearly on the sleek screen, perfect for home, office or anywhere else. Your daily weather briefing - wireless weather station with dependable forecasting Warm jumper or light top? Sunscreen or brolly? One quick look at the graphical weather forecast gives you the answer instantly. The precise outdoor temperature and humidity readings show you exactly what conditions are like just outside. The weather indices for dew point and heat index, plus barometric pressure readings with trend charts, give you the complete weather picture. Accurate readings for perfect indoor comfort Overly dry air from the heating in the lounge, or too much moisture building up in the kitchen? The handy comfort indicator tells you at a glance whether your indoor climate is spot on. The stylish base station also monitors current room temperature and humidity using its built-in thermometer and hygrometer. The max/min memory function tracks daily highs and lows, so you know when it's time to open the windows.Alerts for effortless daily living Feeling chilly at 19°C and reaching for the air con at 24°C? Simply set your comfort zone and the high/low weather alerts will let you know when temperatures go beyond your preferred range. It doesn't stop at temperature either - humidity and barometric pressure changes are automatically flagged up too. Especially useful on frosty winter mornings: the alarm with snooze function and built-in frost alert wakes you 30 minutes early when outdoor temperatures drop below -3°C. Plenty of time to layer up and clear the windscreen. Bring home your personal weather assistant today - the BRESSER Home Weather Station Cumulus! FEATURES BASE STATION Stylish 5.7" true black colour display Indoor temperature & humidity readings with comfort indicator Outdoor temperature & humidity display Graphical weather forecast Barometric pressure with trend chart Weather indices for heat index & dew point Max/min memory function High/low weather alerts for indoor/outdoor temperature & humidity, barometric pressure and optional sensor readings Automatic time, date, day and moon phase via DCF signal (manual setting also available) Alarm with snooze and frost alert Expandable with up to 7 additional sensors (sold separately) Power: Mains adapter (included), CR2032 backup battery (not included) FEATURES SENSOR Temperature and humidity readings Range: up to 30 metres Battery powered: 2x AA batteries (not included) SCOPE OF DELIVERY Base station 1x thermo-hygrometer sensor Mains adapter Instruction manual

Available

£69.00*
BRESSER MeteoTemp Baro HZ Colour Weather Station
The BRESSER MeteoTemp Baro HZ Colour Weather Station gives you a comprehensive overview of the local weather conditions and your indoor climate. In addition to measuring the temperature and humidity, it also features a built-in barometer and weather forecast function, as well as other practical functions such as automatic time adjustment and an alarm clock. Weather forecast function with air pressure indicator Not sure whether to pack an umbrella? The weather station comes with a weather forecast function, which displays the weather forecast using a series of symbols. You can also view the recent air pressure readings from the built-in barometer to give you a better idea of the latest trends in the weather. Precise temperature and humidity measurements Thermometer and hygrometer in one device: the wireless sensor has a range of up to 80 metres and takes precise measurements of the outdoor temperature and humidity. It also features a built-in display, which allows you to view the readings directly from your balcony or garden without returning to the base station. Monitor your indoor climate Temperature and humidity are also important indoors – especially in rooms where we spend a lot of time such as living rooms and offices. For this reason, the base station features a built-in thermometer and hygrometer so that you can keep a close eye on the current conditions. It also displays a smiley to indicate how comfortable the room is based on the measured temperature and humidity. Radio-controlled clock, alarm and more The MeteoTemp Baro HZ colour weather station comes with a radio-controlled clock, which adjusts the time automatically when the clocks change to summer or winter time. It also features an alarm with 2 individually configurable alarm times, and displays a range of useful data, including the sunrise and sunset times and the current moon phase and tide. Monitor the local weather conditions, indoor climate and more with the BRESSER MeteoTemp Baro HZ Colour Weather Station. BASE STATION FEATURES Weather station with integrated thermometer and hygrometer Measures the indoor temperature and humidity Displays the outdoor temperature and humidity Measures the air pressure and displays recent readings Weather forecast with symbols Indoor comfort indicator Large colour display Automatically sets the time via DCF radio signal Date and day of the week (choose from seven languages) 2 alarm times and snooze function Moon phase, sunrise and sunset, tide Backlight Supports up to 2 additional thermo-hygro sensors (not included) Power supply: Mains adapter (included), 3x AAA backup batteries (not included) EXTERNAL SENSOR FEATURES Wireless thermo-hygro sensor Measures the temperature and humidity Built-in display for viewing measurements Range: up to 80 metres Battery operated: 2x AAA batteries (not included) Can be placed on a table or wall-mounted SCOPE OF DELIVERY1x Base station with mains adapter 1x Wireless thermometer/hygrometer sensor Instruction manual

Available

£47.99*
BRESSER Professional Tuya Smart Weather Station with 7-in-1 Sensor
In your smart home, the BRESSER Professional Smart Tuya Weather Station with 7-in-1 Sensor integrates smoothly with your existing Tuya Smart Home system. Once connected, it can automatically trigger compatible devices (not included) based on your customised settings. Plus, you’ll stay updated with the comprehensive 6-day weather forecast, precise data from the outdoor sensor, and the air quality monitor. Smart home integration with Tuya for personalised automation Imagine your home adjusting itself for comfort: if the living room temperature drops below your set comfort level, the heating will turn on automatically. Fully integrable with your Tuya Smart Home app, the weather station follows the rules you set, with Tuya-compatible devices (not included) responding to the specified climate conditions according to your preferences. Accurate data with solar and thermo-hygro sensors Precise readings right outside your door: The 7-in-1 solar-powered outdoor sensor reliably measures outdoor temperature, humidity, wind speed, direction, rainfall, UV level, and light intensity. A large solar panel provides eco-friendly power, while a backup battery ensures continuous operation when sunlight is low. The base station’s built-in thermo-hygro sensor also gives you full control over your indoor climate—ideal for comfort indoors as well. Breathe easy with air quality monitoring This smart weather station keeps you informed on air quality. The display shows internet-based air quality index data along with pollutant levels like PM2.5 and CO2. A high-value alert notifies you directly if any limits are exceeded. Plus, the weather station can be expanded with optional sensors to monitor air quality locally—perfect for ensuring clean indoor air. Prepare your home for any weather—with the BRESSER Professional Smart Tuya Weather Station with 7-in-1 Sensor! FEATURES BASE STATION Smart WiFi weather station controllable via the Tuya Smart Life app Can trigger other Tuya smart devices Measures indoor temperature and humidity Current weather and 6-day forecast with high/low temperatures Displays precise readings from the 7-in-1 solar outdoor sensor (outdoor temperature and humidity, wind speed/direction, rainfall, UV level, light intensity) Shows internet-based air pressure and air quality data (air quality index (AQI), PM2.5, PM10, NO2, SO2, O3, CO) High-value alert for air pollutant levels Max./min. value memory Automatic display of time and date*** Integrated alarm clock with frost warning Displays moon phase, sunrise/sunset Expandable with optional sensors for display on the screen and in the Tuya app: Up to 3x thermo-hygro, soil, and/or pool sensors (not included) 1x PM2.5/10 sensor (not included) 1x CO2 sensor (not included) 1x HCHO and VOC sensor (not included) Power supply: plug (included), CR2032 backup battery (not included) ***PLEASE NOTE: This device receives the DCF time signal (Central European Time). However, you can easily adjust the time display to different time zones using the manual time setting.FEATURES 7-IN-1 OUTDOOR SENSOR Measures temperature, humidity, wind speed, wind direction, rainfall, UV level, light intensity Powered by a large, movable solar panel If sunlight is insufficient, operates on 3x AA batteries (not included) Range: up to 150 m Dimensions: 390 x 174 x 465 mm SCOPE OF DELIVERY Base station incl. plug 7-in-1 wireless sensor User manual

Available

£209.00*
BRESSER Thermo-Hygrometer with Ventilation Recommendation VentAir H
Get a true room climate expert now with the BRESSER Thermo-Hygrometer with Ventilation Recommendation VentAir H. You can easily read on the stylish screen whether it is time for fresh air. Perfect for effectively preventing mould and excessively dry air! Additionally, the high-quality thermometer and hygrometer precisely measure the temperature and humidity indoors as well as outdoors. And with the additional comfort indicator, you can always keep an optimal eye on the room climate. Intuitive operation and practical functions Effortlessly achieve the perfect room climate: The thermo-hygrometer with ventilation recommendation is equipped with user-friendly touch buttons. Interested in the highs and lows of your room's air quality? Simply call up the maximum and minimum values for temperature and humidity. This way, you can also keep an eye on the development of your room climate. Flexible placement thanks to high-quality outdoor sensor Whether in the garden, on the balcony, or in the front yard – with a range of up to 50 m, you have plenty of flexibility in where you place it. The integrated display shows the current temperature and humidity values directly on site. Naturally, the wireless sensor is water-repellent, making it perfect for outdoor use. Ensure fresh air at home, in the office, and more – with the BRESSER Thermo-Hygrometer with Ventilation Recommendation VentAir H. BASE STATION FEATURES Ventilation recommendation for easy improvement of room climate Ideal for early prevention of mould and excessively dry indoor air Room climate comfort indicator Outdoor temperature (°C / °F) Indoor temperature (°C / °F) Relative humidity (indoor and outdoor) (%) Time display Operation via user-friendly touch buttons on the display Min/Max value memory for temperature and humidity With backlight Thermo-hygro outdoor sensor (1x included) Range: up to 50 m Battery operated: 3x AAA batteries (not included) OUTDOOR SENSOR FEATURES Measurement of temperature and humidity Clear LCD display IP protection class: IP44 Dimensions: 71 x 65 x 23 mm / Weight: 44 g Battery operated: 2x AAA batteries (not included) SCOPE OF DELIVERY Base station Outdoor sensor User manual

Available

£36.99*
BRESSER MeteoChamp 9-in-1 Wi-Fi Weather Station with Digital Photo Frame
With the BRESSER MeteoChamp 9-in-1 Wi-Fi Weather Station with Digital Photo Frame, you can keep an eye on the weather while enjoying your favourite images. Designed for keen amateur meteorologists, it combines clear display options, an advanced 9-in-1 multi-sensor and extensive data storage with export features – everything you need for accurate forecasts and analysis. And when it comes to preparing for outdoor plans, the comprehensive weather outlook, heat stress index and air quality data make it easy to look after your health. Thanks to Wi-Fi, your readings are also available on your mobile device wherever you are. A wealth of weather data – with the 9-in-1 sensor Curious which way the wind is blowing today? This wireless weather station gives you the answer in seconds. The solar-assisted outdoor sensor records everything from temperature and air pressure to light intensity with impressive accuracy. Channel overviews, max/min readings, trend graphs or a detailed data log – all appear at a glance on the stylish HD display. Prefer to analyse on your computer? Simply export the data in CSV format. Reliable forecasts for better planning Want to know if the barbecue will be rained off at the weekend? This garden weather station provides a detailed forecast – hourly for the next 24 hours and daily for the next 14 days. Even better: temperature trends and precipitation probability help you plan outdoor activities with confidence. Stay safe on hot days – with heat stress alerts When the sun shines, it’s tempting to head straight outdoors. But intense heat can be tough on the body. That’s where the heat stress index comes in. Based on the Wet Bulb Globe Temperature – a recognised measure that factors in temperature, humidity, wind and solar radiation – it gives you four warning levels to help you cope with the heat. Breathe easy – with local air quality measurement Fresh air or invisible pollutants? The local AQI (Air Quality Index) display shows you straight away. In addition, the digital weather station can access current online pollution data for PM2.5, PM10, NO2, SO2, O3 and CO. Want on-the-spot accuracy? Expand your setup with optional local sensors (see BRESSER accessories). Personal touches on your weather display – the smart photo frame function What makes this digital weather station with rain gauge unique? The integrated photo frame turns the display into your own gallery. Use the dedicated app to upload your favourite pictures to the base station, and enjoy an automatic slideshow of your memories alongside live weather data. A perfect blend of information and inspiration – ideal for the kitchen, living room or office. Keep track of the climate while reliving your favourite moments – with the BRESSER MeteoChamp 9-in-1 Wi-Fi Weather Station with Digital Photo Frame. FEATURES BASE STATION Large 10” HD TFT display (25.4 cm) with multiple viewing modes Shows live data from the 9-in-1 outdoor sensor (outdoor temperature, humidity, wind speed, wind direction, rainfall, UV level, light intensity, WBGT, air pressure) Heat stress index based on WBGT Weather forecast (14 days / 24 hrs) with temperature and precipitation probability Wi-Fi connection for uploading local data to ProWeatherLive or Weathercloud Indoor temperature (°C/°F) and humidity Displays online AQI and six major pollutants (PM2.5, PM10, NO2, SO2, O3, CO) Multi-channel overview of all connected sensors Feels-like outdoor temperature and dew point Max./min. memory with time stamp 72-hour trend graphs for all sensors Data storage with export function (up to 3 years) High/low alarms for various parameters Data calibration Alarm clock with frost alert Works as a digital photo frame with automatic slideshow (Wi-Fi connection and app required) Time and date (internet time synchronisation) Moon phase, sunrise/sunset, moonrise/moonset Touch button operation Expandable with optional sensors: Up to 7x thermo-hygro, soil and/or pool sensors (not included) Up to 7x water detectors (not included) 1x PM2.5/10 sensor (not included) 1x CO2 sensor (not included) 1x HCHO and VOC sensor (not included) 1x lightning sensor (not included) Power supply: USB cable (included), 5V/1A EU/UK adapter (included) FEATURES SENSOR Measures temperature, humidity, wind speed, wind direction, rainfall, UV level, light intensity, air pressure, WBGT Powered by large adjustable solar panel Backup with 3x AA batteries if sunlight is low (not included) Waterproof housing Wireless range up to 150 m SCOPE OF DELIVERY Base station 9-in-1 outdoor sensor Instruction manual

Available

£479.00*