BRESSER Quadro NV Thermo-Hygrometer grey

This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre. Compatible with the following BRESSER weather stations: 7003200, 7003210, 7003220, 7003230, 7002580, 7002585, WSX1001, 7902535, 7902534, 7002541, WSX3001, 7003500, 9080600, 7002586, 7006300, WSH4102, 7003600, 7003300, 7003510, WSX5003, 7003100 FEATURES Temperature measurement function Humidity measurement function 7 available channels Built-in display, can also be used as a standalone solution without a weather centre Temperature range: -20 ~ 60℃ Wireless frequency: 868 MHz Ultra-long range of up to 150 m Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Outdoor sensor Instruction manual

The ideal room climate not only has positive effects on our well-being, it is also good for our health. The two critical values which determine the room climate are temperature and relative humidity.If for instance the humidity is too low the effects can be burning eyes, chapped lips as well as dry nasal mucosa, which reduces our ability to provide protection against inhaled pathogens. On the other hand, if the humidity is too high there is a risk of mould formation. This can also be prevented thanks to the indicator. With the practical 3 piece ClimaTemp Thermo Hygrometer Indicator you now have the control over the room climate in all the rooms you spend most of your time in (e.g. living room, bedroom and children's room). Next to the exact measured values for the room temperature (C°) and humidity (%) the indicator also shows in symbolic form, whether these values are within the recommended range or if there is a need for action. FEATURESTemperature display in °CAir humiditySymbolic room climate indicatorEarly prevention of mouldMounting type: stand, wall mount and magnetSCOPE OF DELIVERY3x Thermo / Hygro Station3x CR2032 batteriesmanual

This additional sensor allows you to take two additional practical measurements with your BRESSER weather station. In addition to the soil temperature, the sensor can also measure the soil moisture – ideal for plant lovers and gardeners. Measurements are sent to the base station at 60 second intervals. The soil moisture meter can be positioned up to 150 metres away from the base station. There are also 7 different channels to choose from. And thanks to the weatherproof housing, the wireless sensor is able to withstand adverse weather conditions. Compatible with the following BRESSER weather stations: 7003200, 7003210, 7003220, 7003230, 7002580, 7002585, WSX1001, 7902535, 7902534, 7002541, WSX3001, 7003500, 9080600, 7002586, 7006300, WSH4102, 7003600, 7003300, 7003510, WSX5003, 7003100 FEATURES Wireless and compact soil sensor Measures the soil humidity Measures the soil temperature Transmission interval: 60 seconds Extra-long range of up to 150 metres 7 available channels LED indicator for data transmission Weatherproof housing Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Soil sensor Instruction manual

The new BRESSER Thermo Hygro Quadro NLX offers, as with our ClimaTrend Hygro Quadro (Art.-No.: 7000020000000) the possibility to measure temperature and humidity at 4 different measuring points simultaneously. In addition, the weather trend, time and date are shown on the clearly arranged colour display. The three remote sensors deliver the data to the receiving station via 433 Mhz radio frequency, at the same time the receiving station also measures temperature and humidity and thus delivers 4 measurement results. The main unit requires a power supply unit (included) for operation. For the remote sensors 6x AAA / LR03 batteries are required (not included). PROPERTIES Clear multi-coloured display Time via DCF radio transmission Display of date and weekday wake-up function 4 measurement results for temperature and relative humidity Early prevention of mould infestation 433 MHz Transmission frequency Remote sensors are splash-proof, therefore suitable for outdoor use Thermo/Hygro remote sensor (3x incl.) SCOPE OF SUPPLY Thermo- / Hygrometer 3x remote sensor Power supply Instruction manual

Want to cool off in your pool? This wireless and floating pool thermometer from BRESSER will tell you whether the water is at an optimal temperature. Measurements are shown on the built-in LCD display. You can also connect the pool thermometer to your BRESSER weather centre so that you can check the pool temperature from the comfort of your own home. The pool sensor is compatible with the following BRESSER weather stations: 7003200, 7003210, 7003220, 7003230, 7002580, 7002585, WSX1001, 7902535, 7902534, 7002541, WSX3001, 7003500, 9080600, 7002586, 7006300, WSH4102, 7003600, 7003300, 7003510, WSX5003, 7003100, 7002531 FEATURES Floating pool sensor for measuring the water temperature LCD display for displaying the temperature (°C/°F) Wireless frequency: 868 MHz Wireless transmission range of up to 30 m to optional base station 7 available channels Waterproof (IPX7) Powered by 2x AA batteries (not included) DELIVERY CONTENT Pool thermometer Instruction manual

The BRESSER Tuya Smart Home 7 Channel Tuya Thermometer/Hygrometer features smart technology that automatically controls your heating or dehumidifier to maintain a comfortable temperature and humidity in your home. This is achieved using IoT (Internet of Things) technology. This smart thermo-hygrometer is the perfect addition to a smart home system powered by Tuya, the world-leading IoT platform. With the Tuya Smart app, you can connect your home appliances and create your very own smart home. As part of this system, the thermo-hygrometer helps to maintain a comfortable environment inside your home. Up to 7 sensors (1 included, 6 optional) can transmit your measurement data to the base station at a range of 150 m, from where the data is transmitted by Wi-Fi to the app. PLEASE NOTE: This device only connects to the internet on the 2.4 GHz Wi-Fi frequency. Most routers establish the correct connection automatically. If this is not the case, you can usually make a manual adjustment.  View measurement data remotely  In addition to facilitating communication between your Tuya smart devices, the Tuya Smart app also displays the comfort level. You can also access the current readings from your smart thermometer and hygrometer remotely at any time via your smartphone. In addition, the app allows you to view historical data. For example, you can view daily, monthly and annual graphs of temperature and humidity. Comfort level indicatorWhile at home, you want to see at a quick glance whether the next round of ventilation is due? The smart thermometer/hygrometer comes with a chic base station that features a large, clearly structured colour LCD display. In addition to the measurements, the trend arrow indicates the temperature and humidity trend over next few minutes. If you're not sure of the ideal relationship between temperature and humidity, the device also features a comfort level indicator, which displays a smiley to show the current comfort level. Practical design: The base station has two display brightness levels and can double up as a bedside alarm. The time, date and day of the week are automatically updated via the Internet - all you need to do is set the alarm time. The base station also features a snooze button that snoozes the alarm to give you an extra 5 minutes in bed. Create the ideal indoor climate with your Tuya smart devices and the BRESSER Smart Home 7 Channel Tuya Thermometer/Hygrometer! In addition to the hygro-thermo sensor, we also offer a range of other wireless sensors for your smart home system, such as pool thermometers and ground sensors. BASE STATION FEATURES Smart thermo-hygrometer for Tuya smart homes Measures temperature (°C/°F) and humidity Operated via Tuya Smart app Can control other Tuya-compatible IoT devices Adjustable high/low alarm in app interface View daily, monthly and annual graphs in app interface Historical data can be downloaded from app interface Large colour LCD display for easy reading of measurements Synchronises the local time and date via the Internet Alarm function with snooze button Max/min memory for temperature and humidity readings (daily or after specific time) Automatic calibration for temperature and humidity readings Displays the temperature and humidity trend Comfort level indicator Automatic cycle mode displays the different channels in 4-second intervals Two display brightness settings: dark or bright 7 languages for day of the week display (EN, DE, FR, ES, IT, NL, RU) Supports firmware updates Large range of up to 150 m (450 ft.) Supports up to 7 external sensors (not included) Can be wall-mounted or placed on desktop Dimensions: 130 x 111 x 27 mm / Weight: 215 g EXTERNAL SENSOR FEATURES Wireless thermo-hygro sensor Measures the temperature and humidity Range of up to 150 m with a transmission frequency of 868 MHz Battery operated: 2x AA batteries (not included) Dimensions: 112 x 60 x 36 mm / Weight: 64 g DELIVERY CONTENT Smart thermometer/hygrometer Wireless thermo-hygro sensor Power adapter Instruction manual

The BRESSER VentAir Thermo-/Hygrometer offers an innovative room ventilation recommendation. Thanks to this ventilation notification, possible mould infestation due to excessive humidity can be prevented. Alternatively, too dry heating air can also be prevented by selective airing. The station can be operated and set very quickly using the touch screen. In addition to the ventilation recommendation, the time, indoor and outdoor temperature as well as indoor and outdoor humidity are displayed. For additional convenience, the station is equipped with white background lighting, which is triggered by the light touch button in the upper frame. The station can receive up to 3 radio transmitter signals, 1 remote sensor with a transmission range of up to 80 m outdoors is already included in the scope of delivery. Further sensors with the BRESSER item code 7009985 can be reordered. FEATURES Ventilation recommendation for a better indoor climate Early prevention of mould infestation 433 MHz transmission frequency 80 m range of transmission Up to 3 sensors can be connected, 1 sensor is included in the packageIP44 Splashproof sensor for placement of the sensor outdoors (hanging only)Outdoor temperature (in °C / F) Indoor temperature (in °C / F) Relative humidity (inside and outside) (in %) Time display White backlight Min/max memory for temp. and humidity With integrated hanging hook and unfoldable table stand in housing SCOPE OF SUPPLY Hygrometer Outdoor sensor Instruction manual

Get a true room climate expert now with the BRESSER Thermo-Hygrometer with Ventilation Recommendation VentAir H. You can easily read on the stylish screen whether it is time for fresh air. Perfect for effectively preventing mould and excessively dry air! Additionally, the high-quality thermometer and hygrometer precisely measure the temperature and humidity indoors as well as outdoors. And with the additional comfort indicator, you can always keep an optimal eye on the room climate. Intuitive operation and practical functions Effortlessly achieve the perfect room climate: The thermo-hygrometer with ventilation recommendation is equipped with user-friendly touch buttons. Interested in the highs and lows of your room's air quality? Simply call up the maximum and minimum values for temperature and humidity. This way, you can also keep an eye on the development of your room climate. Always up to date: A clock and an alarm are also integrated into the device.Flexible placement thanks to high-quality outdoor sensor Whether in the garden, on the balcony, or even in the front yard – the wireless sensor with a range of up to 80 m gives you complete freedom for placement. The integrated display shows the current temperature and humidity values directly on site. Naturally, the wireless sensor is water-repellent, making it perfect for outdoor use. Ensure fresh air at home, in the office, and more – with the BRESSER Thermo-Hygrometer with Ventilation Recommendation VentAir H. BASE STATION FEATURES Ventilation recommendation for easy improvement of room climate Ideal for early prevention of mould and excessively dry indoor air Room climate comfort indicator Outdoor temperature (°C / °F) Indoor temperature (°C / °F) Relative humidity (indoor and outdoor) (%) Time display and integrated alarm Operation via user-friendly touch buttons on the display Min/Max value memory for temperature and humidity With backlight Thermo-hygro outdoor sensor (1x included) Battery operated: 3x AAA batteries (not included) OUTDOOR SENSOR FEATURES Measurement of temperature and humidity Clear LCD display Range: up to 80 m IP protection class: IP44 Dimensions: 71 x 65 x 23 mm / Weight: 44 g Battery operated: 2x AAA batteries (not included) SCOPE OF DELIVERY Base station Outdoor sensor User manual

The BRESSER Thermo- / Hygrometer Quadro offers the possibility to measure temperature and air humidity in or around your house at 4 different locations with simple monitoring at one location: Is my cellar room too moist and threatened by mold? Is the children's bedroom temperature all well? Is it too hot on the terrace? There are many more options open. The three sensors deliver the data sets over 433 Mhz radio frequency to the master station, which also measures temperature and humidity. Battery powered by 3x AAA / LR03 batteries (mainstation) and 6x AAA / LR03 batteries (for the three sensors). FEATURES 4 measurement readings Early prevention of mould 433 Mhz transmission frequency Remote sensors are splashproof - suitable for outdoors With Thermo / hygro remote sensor (3x incl.) Measurement accuracy: temperature +/- 1 °C, humidity: +/- 5 % Mounting type: stand, wall mount and magnet Dimensions and weight base station: 10.4x11.9x2.5cm, 152 g SCOPE OF DELIVERY Thermo- / hygrometer 3x remote sensor User guide

With the BRESSER Window Thermometer Translucidus WT, you can keep an eye on the current indoor temperature every time you look outside. The clear display quickly helps you decide whether to turn the heating or air conditioning up or down. The thermometer also shows the maximum and minimum recorded values, allowing you to monitor temperature changes perfectly.  Window thermometer in a transparent design, mounted without residue The window thermometer looks stylish and lets you see through its transparent display at any window. Installation? Child's play! Use the suction cups to attach the thermometer to the window without leaving any residue. This keeps your window clean, and the thermometer can be ideally placed in any room. Ensure more transparency in your room temperature now – with the BRESSER Window Thermometer Translucidus WT! FEATURES Window thermometer for precise indoor temperature measurement Max./Min. value memory Transparent display Easy and residue-free installation using suction cups SCOPE OF DELIVERYWindow thermometer 1x CR2032 battery User manual

With the BRESSER Tempy Thermo-Hygrometer 3-piece set, you can quickly check your room climate. These practical and extremely small devices reliably measure the temperature and humidity in your surroundings. In addition, you can see at a glance whether the room climate is right. Temperature and humidity meter for every room Living room, kitchen, bathroom or bedroom – where would you like to check temperature and humidity? The Tempy Thermo-Hygrometer set offers you 3 devices that you can distribute as you like, delivering precise measurement data everywhere. Keep an eye on the room climate with a smile How is the air in your home? On the clear display of the temperature and humidity meters, you can immediately see the current room climate comfort level: A happy smiley indicates that the temperature and humidity are ideal. Straight mouth corners mean that everything is still in the green zone. With an unhappy smiley, action is needed. Super small and easy to attach – the thermo-hygrometers Mounting the useful everyday helpers is child's play: They are quickly attached to the refrigerator, magnetic board, and the like via the integrated magnet. Of course, you can also simply place the devices on a sideboard, chest of drawers, or your desk. Thanks to their very compact dimensions, the temperature and humidity meters are extremely space-saving. Order the BRESSER Tempy Thermo-Hygrometer 3-piece set now and ensure an optimal room climate in 3 rooms at home, in the office, and more. FEATURES 3x thermometer and hygrometer in one device. Temperature display in °C. Humidity in %. Smiley as room climate indicator. Suitable for preventing mould. Magnetic back. Required batteries: 3x CR2032, 3V (included). SCOPE OF DELIVERY 3x thermo-hygrometer. 3x CR2032 battery. Instructions.

Bedroom, kitchen, study, children's bedroom: the BRESSER Climate Monitor thermometer/hygrometer DCF three-piece set shows current air conditions at three individual locations. It's important that the temperature and humidity in indoor spaces are balanced for us to feel healthy and well. If the air is too humid for a prolonged period of time, there is a risk of harmful mould developing. Conversely, if the air is too dry, we can quickly experience discomfort. This is particularly noticeable on cold days after prolonged exposure to overheated air. With the thermometer/hygrometer monitor, you can keep a close eye on the indoor climate and give a boost to your health and wellbeing. Thermometer/hygrometer with indoor climate display for added comfort The handy temperature and humidity gauge shows you accurate measured values on a clear and organised display. But sometimes, all you need is the answer to a quick question: do I need to ventilate, or keep the windows closed? The coloured indoor climate/comfort indicator will show you at a glance how the indoor air is currently doing. Is the arrow in the green area? Then the humidity and indoor temperature are both in the green area as well. Red indicates that the air is too dry, while blue indicates humid air - time to act! In addition, the thermometer/hygrometer also gives you the current time on the screen. Keep track of the time: the DCF time signal automatically adjusts the integrated clock from summer to winter time and vice versa. You can also view the date with a simple press of the button. With the BRESSER Climate Monitor thermometer/hygrometer DCF three-piece set, you benefit from three handy assistants to help keep up that feel-good indoor climate. PLEASE NOTE: This device receives the DCF time signal (Central European Time). However, you can easily adjust the time display to different time zones using the offset function. FEATURES 3x thermometers and hygrometers in one device Coloured indoor climate comfort indicator Indoor temperature (in °C/ °F) Relative humidity (indoor, in %) Time by DCF time signal (12 or 24 hr display) Time offset function Date Required batteries: 3x AAA (not included) Mounting type: stand, wall mount and magnet DELIVERY CONTENT 3x thermometers/hygrometers Instruction manual