Skip to main content Skip to search Skip to main navigation
Please note that our minimum order value is £50

BRESSER Professional Rain Gauge

Help & Service for your product

Here you will find quick help, answers to frequently asked questions, and direct access to support.

Service Portal

Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.

Service Portal

Sensor Form

In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.

Sensor Form

Ratgeber & Tipps

FAQ - Frequently Asked Questions

The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
  1. Remove all batteries from the base station and the outdoor sensor.
  2. Wait at least 3–10 minutes.
  3. Insert the batteries into the base station.
  4. Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.

Tips:
  • If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
  • Do not place the base station near other electronic devices (this may interfere with reception).
  • If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
  • Briefly press the reset button on the back with a pen
  • If necessary, place the station closer to a window, as reception inside buildings may be limited

Product and safety instructions


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • WARNING! Do not swallow the battery, risk of chemical burns. This product contains a button cell/button battery. If swallowed, it can cause severe internal chemical burns within just 2 hours and may lead to death. If the battery compartment cannot be securely closed, do not use the product and keep it away from children.
  • If you believe batteries may have been swallowed or are in any body part, seek immediate medical attention. When disposing of this product, make sure it is collected separately if required.
  • The AC/DC adapter serves as a disconnecting device. - The devices AC/DC adapter should not be covered OR must be easily accessible during normal use. - To completely interrupt the power supply, the AC/DC adapter of the device must be disconnected from the network.
  • CAUTION - There is a risk of explosion if the battery is not replaced correctly. Replace only with the same or an equivalent type. The battery should not be exposed to extreme temperatures, low air pressure, or high altitudes during use, storage, or transport.
  • Replacing a battery with an incorrect type can lead to an explosion or leakage of flammable liquid or gas. Do not throw the battery into fire or a hot oven, or mechanically crush or cut it. This can lead to an explosion.
  • The presence of a battery in an environment with extremely high temperatures can cause an explosion or leakage of flammable liquids or gases. - A battery exposed to extremely low air pressure can explode, or there may be leakage of flammable liquids or gases.
Skip product gallery

Compatible Base Stations

BRESSER Additional / Replacement Base Station for Professional Rain Gauge 7002530 (from LOT.-Nr. 1603231)
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station. WARNING! One or more of the listed weather stations have a lot number restriction, so please also check the lot number of your device.7002530 (from lot number 1603231) FEATURES Display of rainfall amount DCF radio-controlled clock reception and display Alarm with snooze function Outdoor temperature alarm (frost warning) Outdoor temperature display (in °C or °F) Indoor temperature (in °C or °F) Indoor humidity Histogram SINCE function for displaying total rainfall since a specific point in time Minimum and maximum value display Max./min. value storage BacklightBattery operated (station: 2x AA – not included!) SCOPE OF DELIVERY Base station No outdoor sensor included! Instruction manual

Available

£44.00*
BRESSER additional / spare base station for rain gauge 7002530 up to LOT No. 1274966
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station. WARNING! One or more of the listed weather stations have a lot number restriction, so please also check the lot number of your device.7002530 (up to lot number 1603230)7002533 Did your base station for your BRESSER professional rain gauge fail to survive your last move or succumb to your children’s curious hands? Perhaps you need an additional display so that you can use the date from your external sensor somewhere else? This additional base station is the accompanying replacement part or expansion for your digital wireless rain gauge. Rosy outlooks with the additional rain gauge base station All plants need water. Every nature lover knows it, from gardeners to farmers. The trick is in the amount. With your rain gauge, you can keep an eye on how much water your plants are getting. Why a second base station? First and foremost, you can keep track of the rain values and external temperature measurements from your existing external sensor from a different location. If you choose to make that location your bedroom, you can even do away with your alarm clock. Set the base station to wake you in the morning, and you’ll instantly know whether you need to make time to water the garden that day. You have all usual display options, including the graphical histogram to display rain values by hour, day, week, month or year. The additional base station is a great all-rounder: The integrated sensor measures the indoor temperature and humidity in the room in which the base station is located. This way, you can declare war on mould and dry air. The other functions, such as the frost alarm, SINCE function and maximum/minimum value alarm, can be used independently of your replacement station. Get more out of your BRESSER professional rain gauge with this additional base station. PLEASE NOTE: This device receives the DCF time signal (Central European Time). However, you can easily adjust the time display to different time zones using the offset function. FEATURES Receives weather data from the professional rain gauge Integrated sensor for measuring the external temperature, indoor temperature (°C/°F) and humidity (%) Graphical histogram SINCE function to display overall rain values from a specific point in time Maximum and minimum value alarm function Min./max. value memory Automatically sets the time via DCF radio signal Alarm function with snooze button Ice/frost alarm Historical data memory Backlight SCOPE OF DELIVERY Base station for professional rain gauge (7002530) Removable stand External sensor not included! Instruction manual

Available

£26.99*
Skip product gallery

Customers also bought

BRESSER JUNIOR Microscope
Equipped with the BRESSER JUNIOR Microscope, young scientists can turn small samples into large discoveries. Thanks to the zoom function, which has a 40-640x magnification, all types of microscopy are available to young researchers. transmitted light microscopy: For the observation of e.g. cell structures, e.g. onion skin in addition to a corresponding high magnification in the first instance wafer-thin samples are required, so that the light can shine through. But don't worry, for the beginning there are already some permanent preparations included in the set and additionally the necessary accessories to prepare further ones by yourself. The included Smartphone adapter, allows you to save pictures and videos on your smartphone or share them with friends and family! FEATURES Set for direct entry into the microscopy world Transmitted light illumination Enlargement without zoom: up to 400x Additional zoom function allows up to 640x magnification Focus wheel for focusing Object stage with object clamps for the slide with specimen Built-in aperture and color filter wheel Battery powered by 2x AA batteries (not included) SCOPE OF DELIVERY Transmitted light microscope Smartphone adapter Zoom eyepiece 10x-16x Cover glasses Empty slides Permanent preparations Preparation box for slides Collecting container Microscopy utensils Magnifying glass Measuring cup Magnifier box Tweezers MicroCut for preparation of preparations PipetteUser manual

Available

£44.99*
EXPLORE SCIENTIFIC TELRAD Projection Finder Scope with base
The TELRAD viewfinder is a projection finder that can be installed on any telescope and makes it child's play to align the telescope with the starry sky.The TELRAD viewfinder is a practical alternative to classic optical viewfinders and illuminated red dot viewfinders. You can see the complete starry sky without magnification, and not just a small section as with a normal optical viewfinder. Against this background of the starry sky, three red luminous concentric rings are projected, with apparent diameters of 4 degrees, 2° and 0.5° in the sky. Move the telescope so that the object you are looking for is in the inner ring, and the telescope points in the right direction. Because the object you are looking for is inside the ring, it will not be irradiated like a normal illuminated red dot finder.The base of the TELRAD viewfinder is self-adhesive and can be mounted on all telescopic tubes from about 10cm diameter. The length of the base is about 18cm. This base remains on the telescopic tube, the TELRAD viewfinder itself can be removed or attached at any time by means of the attached quick coupling. The TELRAD is powered by two normal AA batteries (not included).There are star atlases, like the "Deep Sky Travel Atlas" from Oculum-Verlag, and planetarium programs for the PC, like the program "Stellarium", where the three rings of the TELRAD are already drawn or can be displayed around the interesting celestial objects. This makes finding these celestial objects a real walk.FEATURESTELRAD projection finderIlluminated rings of 4 degrees, 2° and 0.5° in the skySee the complete starry sky without magnificationEasy installation and useCan be installed on nearly every telescopesBase with quick release coupling included Powered by two AA batteries (not included) Very long battery life because of LED technologySCOPE OF DELIVERYTELRAD viewfinder with projector and battery compartment TELRAD base with quick-release coupling for the viewfinder Adhesive tape for attachment to telescope

Available

£61.00*
BRESSER JUNIOR Microscope 40x-640x incl. accessory pack
This BRESSER microphone comes with an experiment set and is the ideal introduction to the world of microscopy. The set consists of 75 parts so that you can get started straight away.You can also scan the specimen QR codes to find out more about the specimen. In addition, you can secure your smartphone to the microscope via the adapter in order to save and share images of your specimens.Thanks to its lightweight design, you can take the microscope with you wherever you go.FEATURES Transmitted light Focus wheel LED light Zoom eyepiece 10x-16x Magnification: 40x-640x Revolver head with 3 lenses: 4x/10x/40x Specimen stage with clamps for the slide and specimen Built-in aperture and colour filter wheelIncludes experiment kit for breeding brine shrimp (Artemia)   WHAT'S INCLUDED Transmitted light microscope Smartphone holder 20 specimens with QR code for each slide 7 empty slides 5 vials with samplesExperiment kit (magnifier box, brine shrimp eggs, yeast) Sea salt 1 empty vial Box for slides Magnifier Dissecting needle Pipette Tweezers Scalpel Petri dish 8 coverslips and 8 stickers Butterfly wing specimen 12 small stones - individual descriptions available via QR code Eyecups for spectacle wearers MicroCut Measuring cylinder

Available

£59.99*
%
BRESSER Soil Temperature and Moisture Meter
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15196151971519815199152011543915440156591566016479700254170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 This additional sensor allows you to take two additional practical measurements with your BRESSER weather station. In addition to the soil temperature, the sensor can also measure the soil moisture – ideal for plant lovers and gardeners. Measurements are sent to the base station at 60 second intervals. The soil moisture meter can be positioned up to 150 metres away from the base station. There are also 7 different channels to choose from. And thanks to the weatherproof housing, the wireless sensor is able to withstand adverse weather conditions. FEATURES Wireless and compact soil sensor Measures the soil humidity Measures the soil temperature Transmission interval: 60 seconds Extra-long range of up to 150 metres Cable length: approx. 140 cm 7 available channels LED indicator for data transmission Weatherproof housing Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Soil sensor Instruction manual

Available

£36.89* £36.99* (0.27% saved)
BRESSER Bird/Small Animal-Camera SFC-1
Sunshine, fresh air, a nice drink and the birds are chirping at the birdhouse. What could be better than watching the bird or the squirrel? So that you can be even closer to the action, BRESSER has developed the bird and small animal camera. Experience your gardeners from a completely new perspective. Use the camera to shoot photos and / or videos of max. 1m distance. Equipped with a 940nm infrared LED illumination, this digital camera can be used both day and night for stunning close-up pics of the small animal. The camera has a motion sensor, with a range of about 1 m, which triggers the camera when an animal flies in front of the camera. Small movements of trees or shrubs are thus prevented. It is also suitable for all seasons due to its rainproof housing. Not only photos are possible with this camera. Also video recordings, optionally of 5.10, 20, 30 seconds, 1 minute or 5min in length, can be recorded. The camera can be used during the day (color images) and thanks to the infrared lighting during the night (black and white). The low power consumption ensures a long service life without having to constantly change the batteries. CHARACTERISTICS Infrared motion sensor allows photo and video recordings (16MP Photo, 1920x1080 24fps video, 1280x720 30fps, 640x480 30fps video) colored pictures by day, monochrome pictures by night 4 built-in infrared LEDs for bright pictures up to 1m away Fast 0.6 sec. tripping time low power consumption for long operating time (up to 12 months in stand-by mode) Tripod connection thread 1/4 '', SD card slot Mini USB port DELIVERY digital small animal camera USB cable assembly belt Mounting rod for mounting to your bird house incl. 6 fixing screws operation manual

Available

£26.90*
BRESSER Microscope Biorit SE 1600x
Whether for school, university, or a hobby, the high-quality BRESSER Biorit SE 1600x Microscope is perfect for a wide range of applications. Thanks to the optional battery operation, it’s also portable. The adjustable LED lighting of the Biorit SE 1600x ensures ideal illumination, with separate controls for both transmitted and incident light, allowing you to dim each light independently. The microscope offers a magnification range of 40x to 1600x, and the 2x Barlow lens allows for additional zooming. Precise observations are supported by the coarse and fine focus adjustments. To protect your samples, the 40x objective lens is spring-loaded. The colour filter wheel makes it easy to highlight different details of your samples. With a modern design and a rear-facing revolving nosepiece, the microscope is extremely user-friendly. The Biorit SE 1600x also features a 360° rotatable monocular viewing head, and it can be powered via a computer or power bank (not included) using the included USB cable and power adapter. To help you get started right away, the microscope comes with 5 prepared slides and blank slides for your own samples. The smartphone camera holder lets you easily take photos and videos through the eyepiece.  FEATURES Biological microscope suitable for beginners and advanced users Magnification: 40x – 1600x Three objectives in the revolving nosepiece: 4x, 10x, 40x Eyepieces: WF10x, WF20x 2x Barlow lens Eyepiece diameter: 23.2 mm Applications: Biology, Botany, Education LED incident and transmitted light Integrated dimmer Coarse and fine focus Comfortable monocular viewing with a 360° rotatable head Power supply: 3 AA batteries (not included), mains plug with USB cable SCOPE OF DELIVERY Microscope 5 prepared slides Blank slides Smartphone holder WF10x and WF20x eyepieces 2x Barlow lens 2 pipettes Protective cover Mains plug USB cable User manual

Available

£109.65*
Skip product gallery

Customers also viewed

BRESSER Wi-Fi Colour Weather Station with 5-in-1 Professional Sensor, white
The new BRESSER Wi-Fi colour Weather Station with a 5-in-1 professional sensor offers a wide range of data in a compact device. The advanced, multifunctional outdoor sensor is easy to mount with the supplied mounting accessories. The outdoor sensor transmits measurements for wind speed, wind direction, humidity, temperature and precipitation to the base station at a frequency of 868 MHz. The clearly structured 5.7" colour display on the base station also displays a range of historical data. It enables internal storage and evaluation of the measured data over a 24-hour period. Using the measured data, the weather station calculates a very reliable local weather trend forecast for the next 12 hours, which is indicated on the display by graphical symbols. You can also use the Wi-Fi function to access your local weather data via Weather Underground. The Wi-Fi function also enables Internet time synchronisation and firmware updates. There is a programmable alarm function for maximum and minimum values, which can emit an acoustic alarm and light signal if either value is reached. A special frost/ice warning alarm can also be configured for outdoor temperatures below -3 °C. A poor indoor climate can pose a particular health risk for children and the elderly. The BRESSER Wi-Fi colour weather station offers a smart feature to help tackle this. The indoor climate indicator uses symbols to visualise the current status of the indoor climate. For fans of the moon, the display also indicates the various phases of the moon. An alarm with snooze function is also included. FEATURES 5.7" colour display for detailed time and weather information WiFi connection with internet time synchronisation Receives weather data from the 5-in-1 sensor and wireless thermo-hygro sensor over 868 MHz frequency Publish local weather station data on the internet via websites such as Weather Underground and Weather Cloud Time, calendar, day of the week and moon phase display Alarm function Ice/frost warning Indoor temperature (°C/°F) and humidity with comfort indicator Outdoor temperature (°C/ °F) and humidity display Displays gusts and average wind speed Precise wind direction display (16 directions) Precipitation quantity (hourly, daily, weekly, monthly, total precipitation) Weather forecast (sunny, partly cloudy, overcast, rain, storm, snow) Atmospheric pressure display Perceived outdoor temperature Weather index for dewpoint, windchill factor and heat index Min./max. memory (up to 24 hours) Alarm with LED indicator Weather calibration 3 different display brightness levels High/Low/Off 7 languages for days of the week Firmware updates supported Supports wireless 5-in-1 professional weather sensor (included) Supports up to 7 additional wireless sensors (optional) (item no.: 7009999)Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms. DELIVERY CONTENT Base station Professional 5-in-1 outdoor sensor with mounting accessories 100-240 V/50 Hz power adapter and cable

Available

£150.41*
%
BRESSER Quadro NV Thermo-Hygrometer black
With the BRESSER Quadro NV Thermo-Hygrometer, you are always on the safe side when it comes to your indoor climate. The practical wireless thermo-hygrometer provides you with precise values for temperature and humidity – in four different places in your home at once. In addition to the base station, three compact sensors measure the conditions in further rooms. This means you can effortlessly keep an eye on your indoor climate and immediately see where an adjustment makes sense. Three wireless sensors for maximum flexibility Whether in the children’s room, hallway or cellar: the three compact outdoor sensors can be positioned in no time and precisely record temperature and humidity. With a range of up to 80 m, the readings are quickly transmitted to the base station. Each outdoor sensor also has its own display, allowing you to read the values directly on site. Thanks to the IP44 protection rating, the robust sensor reliably withstands splashing water. The comfort indicator – your feel-good barometer for the home Is the air in your bedroom too dry? The comfort indicator on your wireless thermo-hygrometer tells you at a glance. A smiling, neutral or sad smiley instantly shows you the state of your indoor climate. This makes it easy to create optimum conditions and ensure greater well-being in every room. Early alerts for heat, cold and humidity Is the cellar too damp or the children’s room too cool? With the high/low value alarm, you can set your own limit values for temperature and humidity. When these are reached, the wireless thermo-hygrometer informs you immediately. The value memory also records the lowest and highest readings – practical for regular climate checks. Ready to use straight away – batteries already included A major advantage: with this model, the batteries are included in the scope of delivery. Eight AAA batteries supply power to both the base station and all three outdoor sensors. This saves you an additional purchase and lets you get started straight after unpacking. So your new indoor climate set is fully set up in just a few minutes. Get the BRESSER Quadro NV Thermo-Hygrometer now and enjoy a thoroughly pleasant home! FEATURES BASE STATION Built-in thermometer and hygrometer for measurements at the installation location Measurement data display from the 3 wireless thermo-hygro sensors Temperature display with trend in °C/°F Humidity display in % Comfort indicator for the indoor climate as a smiley Min./max. value memory for temperature and humidity High/low value alarm for temperature and humidity Battery-operated: 2 AAA batteries (included in the scope of delivery) FEATURES OUTDOOR SENSORS 3 wireless thermo-hygro sensors included Temperature and humidity (indoors or outdoors) With display for direct reading of the measurement data Range: up to 80 m IP protection rating: IP44 (splash-proof) Dimensions: 71 x 65 x 23 mm / Weight: 44 g Battery-operated: 2x 1.5 V AAA batteries each (included in the scope of delivery) SCOPE OF DELIVERY Base station 3x wireless sensor 8x AAA batteries Instruction manual

Available

£29.95* £33.95* (11.78% saved)