Go to homepage
£0.00

BRESSER Polar Finder Scope for StarTracker PM-100

Skip image gallery

Polar Finder Scope for StarTracker PM-100

  • Optical pole finder scope with illumination
  • To optimize the polar alignment
  • Suitable for BRESSER StarTracker Astrophoto Mount PM-100
  • Illuminated crosshairs and constellation markings
  • Quick and easy to use

£79.00*

% £99.00* (20.2% saved)

Prices include VAT. Shipping costs not included

Available, delivery time: 3-5 working days

Product number: 4964131
EAN: 4007922060422
WEEE-Reg.-Nr.: DE 34323861

With BRESSER, you can enjoy a smooth introduction to the vast world of astronomy. Our detailed information ("Telescope Guide") provides valuable tips for beginners—but even experienced astronomers can use the information we provide (e.g., tables for the geographical latitude of all major world cities) as a reference.

Here is the table of contents of the comprehensive BRESSER Telescope Guide:

Sky Guides by Bresser

The Sky Guide provides comprehensive information on constellations, planetary positions, and astronomical events – perfect for planning your observations and delving deeper into astronomy.
Visit the guide directly here to make the most of your observations!

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Product and safety instructions


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • General warning instructions DANGER! RISK of bodily injury! Never look directly at the sun or near the sun through this device. There is a risk of blindness! Sharp-edged and pointed tools are often used with this device. Therefore, store this device and all accessories and tools in a place inaccessible to children. There is a RISK of injury! Children may only use the device under supervision. Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a risk of suffocation! FIRE HAZARD! Do not expose the device – especially the lenses – to direct sunlight! The light concentration could cause fires. NOTE! Do not dismantle the device! In case of a defect, contact your dealer. They will contact the service center and may send the device in for repair. PRIVACY PROTECTION! The telescope is intended for private use. Respect the privacy of others – for example, do not use this device to look into apartments!
Skip product gallery

Accessories

BRESSER StarTracker Astronomical Photo Mount PM-100
BRESSER StarTracker Astronomical Photo Mount PM-100
Do you already own a photo camera and would like to create impressive pictures of the night sky with the help of the long exposure or even make time-lapse pictures with little effort ? The BRESSER StarTracker Astronomical PhotoMount PM-100 is the ideal base. Not only for beginners in astrophotography, this mount is particularly well suited, but also the experts swear by a compact and easy-to-use mount to automatically compensate for the natural rotation of the earth. The built-in tracking motor rotates the saddle-mounted camera precisely against the earth's rotation and thus the stars remain in pinpoint shape even with long exposures. If you already own a sturdy photo tripod with a video tilt head you can use the photo mount's head directly with the 1/4 inch & 3/8 inch photo thread holes. The pole height (latitude) is then adjusted by the video tilt head. The photo-mount with tripod with carry-case and polar wedge are also available as a bundle - Product No.: 4964120 Which cameras are basically suitable for use with the BRESSER photo mount ? All cameras with ¼ inch (6.3mm) tripod connection thread and bulb length" B "for long exposure are suitable. The BRESSER StarTracker Astronomical Photo Mount PM-100 is designed for a camera with lens of max. 2.0 kg total weight to carry and track in polar mode. In Azimut mode also a camera weight up to 5.0kg is possible.  Large aperture, wide-angle lenses are ideal for the beginning, because the requirements for tracking accuracy accumulate with increasing focal length and exposure time. Thus, a shot with wide-angle lens can be exposed for up to several minutes and the stars remain punctiform without problems. For example, with a 200mm telephoto lens the polar alignment of the photo mount must be exactly right. But thanks to the integrated pole finder tunnel, this is done quickly. After setting up the light and compact StarTracker Photo Mount, simply set the approximate latitude (pole height) and aim Polaris through the integrated pole finder tunnel. Then mount the camera with the photo lens using the quick-release plate on the supplied ball head. With the ball head, the camera can be aligned and determined at any time on any section of the sky. As soon as the tracking motor is switched on, long-time exposure can be started immediately. This does not even take 5 minutes ... The tracking is carried out by a precise stepper motor, which can be controlled by an easy digital setup on LCD screen. Low power consumption allows up to 20 hours of operation with just one battery charge or simply use the micro USB port for an unlimited power supply. FEATURES Equatorial StarTracker Photo-Mount Automatic siderial tracking against the Earth rotation  Different tracking speed setting possible Suitable for northern and southern henisphere Time lapse: from 15 minutes to 48 hours Ballhead with quick release saddle plate and 1/4" Photo thread for Kamera mountingPhoto-Mount with 1/4" threaded bolt for ballhead mounting Additional quick release coupling for ball head removal High precision stepper motor with helical gear for accurate tracking Clear LCD screen and easy setup menu Battery operation 4 x AA batteries or mico USB (optional acc.)  Battery life: up to 20 hours Weight Photo-Mont: 0.63kg Load capacity of Photo-Mount: up to 2.0kg/5.0kg (EQ/AZ) Optional Acc: Polar-wedge, Tripod and carry-case, optical pole finder scope with illumination unit SCOPE OF DELIVERY StarTracker astronomical Photo-Mount head Ballhead with quick release saddle plate User manual

Available

£399.00*
Skip product gallery

Customers also bought

BRESSER Micro Motion Head MH-100 (Polar-Wedge)
BRESSER Micro Motion Head MH-100 (Polar-Wedge)
Tripod head with fine adjustment for fast and precise pole height adjustment of the BRESSER StarTracker Astrophoto Mount PM-100 art. no. 4964120. The BRESSER Micro Motion Head MH-100 allows a very precise adjustment by using large dimensioned knurled screws. In order to keep the adjustment distances by using the knurled screws as small as possible, the mounting plate has a quick-release clamping device with toothing in order to be able to select a rough presetting of the pole height (latitude at the location). The Micro Motion Head MH-100 can be mounted on any photo tripod with 1/4 inch photo thread closure. The BRESSER StarTracker astrophoto mount can then be mounted on the MH-100 tripod head without the use of tools using a 1/4" photo thread screw. The complete  motion head is made of black anodized aluminum and guarantees highest stability by the use of solid material. The knurled screws with fine pitch thread are even made of stainless steel and guarantee a long durability and corrosion resistance. Ideal for optimizing tracking accuracy in astrophotography. IMPORTANT NOTE: Can also be used as a stable adjustment element of a telescopic sight in astrophotography. Parallel alignment of the main telescope and the guide telescope is thus also possible quickly and precisely. Base plate connection: 3 x 1/4 inch photo thread with 35.0 mm hole spacing. Mounting plate connection: 2 x M8x1.25 thread with 35.0mm hole spacing. FEATURES Compact micro motion head with fine adjustment Functions as a so-called polar-wedge For precise adjustment of polar alignment (EQ mode)Mounting plate with quick-release clamping device and toothingCan be used with any photo tripod and 1/4inch thread adapterMade of black anodised aluminium and stainless steel Quick and easy to use deviceSuitable for BRESSER StarTracker Astrophoto Mount PM-100 Suitable for BRESSER tripod TP-100 DX  Also ideal as an adjustment element of an auto-guiding scopeFor parallel alignment of main telescope and guiding telescope Base plate connection: 3 x 1/4 inch photo thread; hole spacing 35.0mm Connection mounting plate: 2 x M8x1.25mm thread; drilling distance 35,0mm SCOPE OF DELIVERY Micro Motion Head MH-100 Instruction manual

Available

£99.00*
BRESSER StarTracker Astronomical Photo Mount PM-100
BRESSER StarTracker Astronomical Photo Mount PM-100
Do you already own a photo camera and would like to create impressive pictures of the night sky with the help of the long exposure or even make time-lapse pictures with little effort ? The BRESSER StarTracker Astronomical PhotoMount PM-100 is the ideal base. Not only for beginners in astrophotography, this mount is particularly well suited, but also the experts swear by a compact and easy-to-use mount to automatically compensate for the natural rotation of the earth. The built-in tracking motor rotates the saddle-mounted camera precisely against the earth's rotation and thus the stars remain in pinpoint shape even with long exposures. If you already own a sturdy photo tripod with a video tilt head you can use the photo mount's head directly with the 1/4 inch & 3/8 inch photo thread holes. The pole height (latitude) is then adjusted by the video tilt head. The photo-mount with tripod with carry-case and polar wedge are also available as a bundle - Product No.: 4964120 Which cameras are basically suitable for use with the BRESSER photo mount ? All cameras with ¼ inch (6.3mm) tripod connection thread and bulb length" B "for long exposure are suitable. The BRESSER StarTracker Astronomical Photo Mount PM-100 is designed for a camera with lens of max. 2.0 kg total weight to carry and track in polar mode. In Azimut mode also a camera weight up to 5.0kg is possible.  Large aperture, wide-angle lenses are ideal for the beginning, because the requirements for tracking accuracy accumulate with increasing focal length and exposure time. Thus, a shot with wide-angle lens can be exposed for up to several minutes and the stars remain punctiform without problems. For example, with a 200mm telephoto lens the polar alignment of the photo mount must be exactly right. But thanks to the integrated pole finder tunnel, this is done quickly. After setting up the light and compact StarTracker Photo Mount, simply set the approximate latitude (pole height) and aim Polaris through the integrated pole finder tunnel. Then mount the camera with the photo lens using the quick-release plate on the supplied ball head. With the ball head, the camera can be aligned and determined at any time on any section of the sky. As soon as the tracking motor is switched on, long-time exposure can be started immediately. This does not even take 5 minutes ... The tracking is carried out by a precise stepper motor, which can be controlled by an easy digital setup on LCD screen. Low power consumption allows up to 20 hours of operation with just one battery charge or simply use the micro USB port for an unlimited power supply. FEATURES Equatorial StarTracker Photo-Mount Automatic siderial tracking against the Earth rotation  Different tracking speed setting possible Suitable for northern and southern henisphere Time lapse: from 15 minutes to 48 hours Ballhead with quick release saddle plate and 1/4" Photo thread for Kamera mountingPhoto-Mount with 1/4" threaded bolt for ballhead mounting Additional quick release coupling for ball head removal High precision stepper motor with helical gear for accurate tracking Clear LCD screen and easy setup menu Battery operation 4 x AA batteries or mico USB (optional acc.)  Battery life: up to 20 hours Weight Photo-Mont: 0.63kg Load capacity of Photo-Mount: up to 2.0kg/5.0kg (EQ/AZ) Optional Acc: Polar-wedge, Tripod and carry-case, optical pole finder scope with illumination unit SCOPE OF DELIVERY StarTracker astronomical Photo-Mount head Ballhead with quick release saddle plate User manual

Available

£399.00*
Vixen Polarie Star Tracker Camera Mount for Astrophotography
Vixen Polarie Star Tracker Camera Mount for Astrophotography
The Vixen POLARIE is a new camera accessory, that enables you to capture sharp, point-like images of the stars. It has been developed to track the stars and to compensate for the movement of the earth. POLARIE enables you to take atmospheric shots of landscapes and the night sky and can also capture these in sharp images. Extremely simple and compact design for use in every location on earth. If you have ever viewed a romantic, starry sky, you will surely have felt the desire to capture it on film. But if you have tried to do this, you will know that it’s really not all that easy. This is because you need to have multiple exposures of several minutes if you want to photograph the stars. As our earth is always turning on its axis, the stars keep moving as time passes and become long strokes on photographs. Today’s digital technology gives us the option of obtaining shorter exposure times by increasing the sensitivity of the sensor, but, unfortunately, this dramatically increases picture noise and the picture becomes very noisy and ugly. This makes it impossible to take beautiful images of the night sky. For this reason, the Vixen company has developed the Polarie Star Tracker, which eliminates the problem of star migration. When you attach your camera to the Polarie, the device will track in the opposite direction of earth’s rotation and this allows for sharp, point-like images of the starry sky even when using long exposure times. POLARIE is a new and unique camera accessory for photographing the night sky, with perfectly point-like stars being tracked. Using the simplest solution, it makes the experience of photographing the night sky more accessible for everyone. The multi-functional mode dial is adjustable for sky- and landscape-, moon-, sun- and star-tracking. Polar altimeter for a fast focus. Also included: USB connection for external power supply and a built-in compass for quick orientation. Available as optional extra accessories are a polar finder telescope for exact alignment with the celestial pole for long-exposure photography including into the telephoto range, and a tripod. FEATURES Tracking speed: Sidereal, 0.5x sidereal, sun, moon Fine adjustment: F57, 6mm worm wheel with 144 teeth Polar axis: F 40mm, aluminium alloy Drive: High-precision stepper motor: Bearing capacity: approx. 2kg incl. ball head Orientation aperture: Field of vision 8.9° vInclinometer: 0° to 70° Miscellaneous: Built-in compass (removable) Power supply: 2x AA batteries (compatible with alkaline, Ni-MH, Ni-CD batteries) or external power supply compatible with USB mini-B Drive voltage: AA batteries: DC2,4-3.0V, Max. 0.6A External power supply: DC4,4-5,25V, max. 0.3A Operating time: approx. 2 hours with alkaline batteries Approx. 20 hours with external power supply at 20°C with 2 kg load Operating temperature: 0° to 40° Dimensions: 95mm x 137mm x 58mm Weight: 740g without batteries Optional accessories available: Polar finder telescope, M-155 tripod, QPL compass, ball head WHAT’S INCLUDED 1x camera mount

Available

£395.00*
Skip product gallery

Customers also viewed

BRESSER Micro Motion Head MH-100 (Polar-Wedge)
BRESSER Micro Motion Head MH-100 (Polar-Wedge)
Tripod head with fine adjustment for fast and precise pole height adjustment of the BRESSER StarTracker Astrophoto Mount PM-100 art. no. 4964120. The BRESSER Micro Motion Head MH-100 allows a very precise adjustment by using large dimensioned knurled screws. In order to keep the adjustment distances by using the knurled screws as small as possible, the mounting plate has a quick-release clamping device with toothing in order to be able to select a rough presetting of the pole height (latitude at the location). The Micro Motion Head MH-100 can be mounted on any photo tripod with 1/4 inch photo thread closure. The BRESSER StarTracker astrophoto mount can then be mounted on the MH-100 tripod head without the use of tools using a 1/4" photo thread screw. The complete  motion head is made of black anodized aluminum and guarantees highest stability by the use of solid material. The knurled screws with fine pitch thread are even made of stainless steel and guarantee a long durability and corrosion resistance. Ideal for optimizing tracking accuracy in astrophotography. IMPORTANT NOTE: Can also be used as a stable adjustment element of a telescopic sight in astrophotography. Parallel alignment of the main telescope and the guide telescope is thus also possible quickly and precisely. Base plate connection: 3 x 1/4 inch photo thread with 35.0 mm hole spacing. Mounting plate connection: 2 x M8x1.25 thread with 35.0mm hole spacing. FEATURES Compact micro motion head with fine adjustment Functions as a so-called polar-wedge For precise adjustment of polar alignment (EQ mode)Mounting plate with quick-release clamping device and toothingCan be used with any photo tripod and 1/4inch thread adapterMade of black anodised aluminium and stainless steel Quick and easy to use deviceSuitable for BRESSER StarTracker Astrophoto Mount PM-100 Suitable for BRESSER tripod TP-100 DX  Also ideal as an adjustment element of an auto-guiding scopeFor parallel alignment of main telescope and guiding telescope Base plate connection: 3 x 1/4 inch photo thread; hole spacing 35.0mm Connection mounting plate: 2 x M8x1.25mm thread; drilling distance 35,0mm SCOPE OF DELIVERY Micro Motion Head MH-100 Instruction manual

Available

£99.00*
BRESSER StarTracker GoTo Set
BRESSER StarTracker GoTo Set
Stargazing at the push of a button!With the BRESSER StarTracker GoTo kit you can upgrade any existing BRESSER EXOS-2 mount.This BRESSER StarTracker GoTo System enables beginners to start astronomical observations in just a few minutes, and guides you to objects that are hard to localize through a standard finder scope. Just push the button and the GoTo System will find planets, nebulae or galaxies for you and position your telescope automatically and precise. The GoTo System database includes over 100,000 astronomical objects and still has space for your additions. The Messier telescope with GoTo System allows you to observe without tedious searching, or image faint objects that are hard to find in a standard finder scope! The BRESSER StarTracker GoTo systems uses servo motors for both axes and features an ST-4 compatible autoguiding input. Guiding aggressivity can be set on the mount itself. The menu navigation of the Startracker Handbox is also multilingual and offers the settings of German, English, French, Spanish and Italian. FEATURESObjects in database: > 100.000Slewing speed: 2°/secAuto-Guider Port: Yes / ST-4 compatible, aggressivity can be adjustedLC Display: 36 x 63mm ; 8 rows with 21 digitsMotors: DC Servo with EncodersOperating voltage: 12V DCSCOPE OF DELIVERY2 Servo motors for both axis (RA and DEC)GoTo computer control StarTrackerStartracker handbox DE/GB/FR/ES/ITBattery pack* with power cableConncetion cable for motorsConnection cable for handboxMounting material (gears, screws, Allen keys)Manual*Batteries not included; 8 pcs. batteries, type D (LR 20) 1.5V required

Available

£519.00*