BRESSER Pirsch 9-27x56 Spotting Scope Gen. II with Tube-Focus

Take photos with your smartphone through your spotting scope, microscope or telescope. It’s a child's play with the BRESSER Universal Smartphone Adapter. Simply attach the adapter to the eyepiece holder of your optical device and then use all together as a telephoto lens for your smartphone camera. Now you can shoot distant objects as if they were up close or take photos through a microscope.FEATURESuniversal adapter to assemble the smartphone to a spotting scope or telescopefor eyepieces up to 68 mm diameterfor smartphones with a width of 50-88mmSCOPE OF DELIVERYSmartphone adapterManual

Capturing beautiful moments with your SLR camera on a photo is sometimes limited when it comes to long distances. Simply connect your SLR camera to your scope with this Photoadapter and benefit from the high magnification of the scope to overcome this problem and capture the smallest details on photo. Inner diameter: 40-54mm Inside dimension Length: 68 - 81mm All you need is your camera, a spotting scope of the Dachstein or Prisch Gen II series and this photo adapter as well as the matching T2 ring for your camera and the fun can start. Suitable for: BRESSER Pirsch Gen II spotting scopes BRESSER Dachstein spotting scopes BRESSER Condor Gen II spotting scopes BRESSER 15-45x60 Spektar spotting scope Spotting scopes of other brands

Already own a microscope and want to discover as much as you possibly can with it? The BRESSER JUNIOR 24 durable specimens in the microscope starter kit offer you plenty of examination objects for a quick and easy way to get started. In addition, the specimens from different areas, including plants, algae and insects, are ready and waiting to be viewed on a total of 6 microscope slides. Simply unpack them, place them on the plate of your microscope and start zooming in. You’ll be astounded by the minute detail that suddenly becomes visible to you. View again and again – the preserved microscope specimens are highly durable. You’re certain to get admiring looks from your friends and family as well. With these 24 durable specimens for your microscope, you can go on a voyage of discovery into the microcosm: Algae: water silk, zygnema, ulotrichaceae, cyclops Leaves and starch: privet leaf, oleander leaf, maize starch, potato starch Plants: maize root, peanut root, sponge gourd, pine trunk Textile fibres: cotton fibres, nylon fibres, silk fibres, letter ‘e’ Animals: fish scales, camel hair, chicken feathers, duck feathers Insects: honeybee wings, dragonfly wings, beetle legs, cockroach legs FEATURES 6 microscope slides with a total of 24 durable specimens for children aged 6 and over 4 samples each from algae, leaves and starch, plants, textile fibres, animals and insects The perfect way to introduce children to microscopy Robust and stable Child-friendly use and packaging PACKAGE CONTENTS 6 microscope slides with a total of 24 durable specimens Instruction manual

The BRESSER table-tripod with its height of 24 cm is a lot more versatile than one might think. It can be used lying in prone position, on observation posts as well as simply from a table. It is useful for a large variety of BRESSER binoculars* as well as BRESSER spotting scopes up to the weight of 1.000 g. With the convenient adjustment handle the tripod head can be moved vertically and horizontally; it also can be fastened to provide a steady image for observations. The BRESSER table tripod can be folded to have space-saving, small package for mobile use (dimensions when folded: ca. 295 x 65 x 54mm; weight: 245 g). FEATURESsturdy table tripod1/4" threadeasy positioning and fixation of the tripod head via handlecompact and lightweightSCOPE OF DELIVERYTable tripod 24 cm *For the use with binoculars an optional tripod adapter (item # 1916000 or 1916500) is needed.

Connect your BRESSER Microscope or Telescope with a Sony System camera and take images or videos* of your observed object!T-Mounts are the connecting piece between the T2 camera adapter and the system camera. Please read the instruction manual of your camera to find out which T-Mount you need, look into the instruction manual of your camera.The adapter will provide the necessary distance extension between the flange focal length of 18mm for E-Mount and 55mm for T2. The overall length is 37mm.For Sony NEX or ILCE cameras with E-Mount bajonet (e.g. Sony Alpha 6000, Sony A7S / A7R)SCOPE OF DELIVERYT2-Ring für Sony E-Mount camerasFor Sony NEX, ILCE Cameras (e.g. A7S, A7R)

Crystal clear - the new Dachstein line! The new top line of BRESSER spotting scopes! Robust, waterproof, fully multi-coated - these attributes are natural for the Dachstein line. Beyond that these spotting scopes feature exclusive ED optics. Colour fidelity, contrast and sharpness are raised far above the standard level of lenses. ED-glass objective (ED = Extra low Dispersion) are produced in a special process and reduce the so-called secondary spectrum to a minimum. This model has additionally a focus mechanism with coarse & fine drive allowing smooth and precise focusing. In conclusion the Dachstein spotting scopes deliver a special experience for the demanding user. They are also great for digiscoping: Using the #4914900 digital camera adapter, nearly every digital camera or compact camcorder can be used. FEATURESzoom spotting scopeangled viewingwaterprooffully multi coatedoptics made of ED glassSCOPE OF DELIVERYspotting scopeready-to-use casemanual

The BRESSER Pirsch Gen II spotting scopes are primarily intended for nature observers and hunters. Equipped with a light-intense, fully broadband multi-coated 80 mm lens, they allow higher magnifications even at twilight. This spotting scope is also equipped with the high-quality UR coating for brighter images. Together with the waterproof and nitrogen-filled housing and the non-reflective enforcement, nature observers can determine e.g. bird species in any weather or hunters can target game even at long distances. Photography But also friends of digital photography will find a reliable tool in the Pirsch series: together with the DSLR adapters 49-20002 or 49-14911 almost all digital cameras or smartphones can be connected. Robust materials The focus and eyepieces are made of sturdy metal for a long-lasting pleasure with the Pirsch spotting scope. The rubber enforcement is manufactured to ensure a firm grip. Compensation The Pirsch spotting scopes of Gen. II are all equipped with the new UR coating. This special coating ensures better light transmission and therefore provides a bright image even in difficult lighting conditions. 10:1 focusing An important factor in optical devices is optimal focusing. Here, we at BRESSER have paid great attention to fast and easy focusing as well as very precise focusing. Thus, the focus of the Pirsch spotting scope can be adjusted quickly and down to the last cm. This is ensured by the 10:1 ratio of the focus. Waterproof and nitrogen filled All Pirsch models are waterproof and nitrogen filled. So you have the perfect companion with you in all weather conditions. Rain or fog does not matter to the device. Fogging from the inside in case of large temperature differences is prevented by the nitrogen filling and thus ensures that the device is always ready for use. PROPERTIES Zoom perspective slanting view fully multi-coated optics UR coated optics very high light collecting capacity waterproof and nitrogen filled housing SCOPE OF DELIVERY Spotting scope Ready bag for spotting scope Instructions

The BRESSER Pirsch Gen II spotting scopes are primarily intended for nature observers. Equipped with a light-intense, fully broadband multi-coated 80 mm lens, they allow higher magnifications even at twilight. This spotting scope is also equipped with the high-quality UR coating for brighter and higher-contrast images. Together with the waterproof and nitrogen-filled housing and the non-reflective armouring, nature observers can determine e.g. bird species in any weather, even at long distances. Photography Enthusiasts of digital photography will find also a reliable tool in the Pirsch series: together with the DSLR adapters 49-20002 or 49-14911 almost all digital cameras or smartphones can be connected to this telescope. Robust materials The focus and eyepieces are made of sturdy metal, ensuring long-lasting pleasure when using the Pirsch spotting scope range. The rubber armouring is manufactured to ensure a firm grip and protection against knocks during use in the field. Compensation The Pirsch spotting scopes of Gen. II are all equipped with the new UR coating. This special coating ensures better light transmission and therefore provides a bright image even in difficult lighting conditions.   10:1 DeLuxe focusing An important factor in optical devices is optimal focusing. Here, we at BRESSER have paid great attention to fast and easy focusing as well as very precise focusing. Thus, the focus of the Pirsch spotting scope can be adjusted quickly and down to the last cm. This is ensured by the 10:1 ratio of the focus. Waterproof and nitrogen filled All Pirsch models are waterproof and nitrogen filled, so you have the perfect optical companion with you in all weather conditions. Rain or fog present no obstacle to using the Pirsch. Fogging from the inside in case of large temperature differences is prevented by the nitrogen filling and thus ensures that the device is always ready for use and provide clear views, no matter what the prevailing weather conditions are. PROPERTIES Zoom perspective relaxed 45° view through zoom eyepiece fully multi-coated optics UR coated optics very high light gathering capacity waterproof and nitrogen filled housing What's Included Spotting scope Carry bag for spotting scope Instructions

The BRESSER BX-10 Pro Tripod with Fluid Pan-and-Tilt Head is a very versatile tripod that is height and angle adjustable. The ball head has a load capacity of 12 kg. This makes the tripod extremely flexible and one can work with different camera models, binoculars, spotting scopes and astronomy binoculars. The non-slip rubber feet are ideal for grip on smooth surfaces indoors, but also offer extremely good grip on muddy, sandy and uneven surfaces outdoors. This all-round tripod by BRESSER features aluminium alloy tripod legs and a fluid head with a 70 mm diameter base. The four-piece legs are locked with a quick-lock swivel system. The base of the ball head is equipped with a 3/8" mounting thread. For panning and tilting the ball head, the supplied handle is used. This handle can be mounted on the left or right side. Also, the handle can be adjusted in length with a minimum length of 26 cm and a maximum length of 35 cm. The desired length can be fixed with the handle extension lock. The folded tripod has a height of 82 cm and can be extended to a height of 184 cm. If you also extend the centre column, you reach a maximum height of 216 cm. The minimum working height of the tripod is 78 cm. If you spread the legs to their maximum, the minimum working height is 62 cm. The tripod head allows 360-degree swivels and tilts from +90 to -70 degrees. The quick release plate is universal and features a standard tripod connection (1/4" screw) and a 3/8" screw that allows you to easily mount any camera, binocular adapter, spotting scope or astronomy binocular on the tripod head. Thanks to the built-in level, you can also see if your tripod is level. The unused screw can be turned into the appropriate compartment on the tripod head so that it does not get lost and is always at hand. The quick release plate is secured by a safety device. The tripod with fluid head weighs 3,786 grams. The center column has a hook that helps to ensure stability. For example, use a sandbag, water bag, backpack and even rocks in a bag to improve balance. A carrying bag is included for easy storage and transportation. FEATURES Very sturdy all-in-one tripod High quality construction Fluid Pan-and-Tilt Head Folded length: 82 cm Minimum working height: 78 cm (tripod legs normally spread) Minimum working height: 62 cm (tripod legs spread to the maximum) Maximum working height: 216 cm Tripod load capacity (as a set): 10-12 kg Load capacity ball head: 10-12 kg Tripod load capacity: 20 kg Tripod and ball head weight: 3,786 grams Level Height adjustable central column Hook for counterweight 1/4" and 3/8" connection Carrying bag SCOPE OF DELIVERY BRESSER BX-10 Pro Tripod BRESSER BX-10 Pro Fluid Pan-and-Tilt Head Fluid Pan-and-Tilt Head handle Quick Release Plate 50 x 92 mm 1/4" screw 3/8" screw Carrying bag with pocket