Digital radio-controlled clock with 194 x 110 mm LCD display and 6 cm high digits
- Large 194x110 mm display, DCF radio clock, alarm with snooze function
- Indoor temperature, date and day of the week
- Automatically switches to summer/winter time
- Dimensions: 225x150x20 mm, Weight: 330 g
- Powered by 3x AAA batteries (not included)
- Large time display with 6 cm high digits
- Indoor temperature in °C or °F
- Time is set via DCF radio signal
- Plastic housing with modern wooden look
£36.89*
% £36.99* (0.27% saved)Available, delivery time: 10-12 working days
Product number:
13623
Former product no.:
7001802
Note: Our item numbers have been updated.
You can continue to search for products using either the previous or the new item number.
EAN:
4007922061948
WEEE-Reg.-Nr.:
DE 34323861
Help & Service for your product
Here you will find quick help, answers to frequently asked questions, and direct access to support.
Service Portal
Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.
Service PortalSensor Form
In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.
Sensor Form
FAQ - Frequently Asked Questions
The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
Tips:
- Remove all batteries from the base station and the outdoor sensor.
- Wait at least 3–10 minutes.
- Insert the batteries into the base station.
- Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.
Tips:
- If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
- Do not place the base station near other electronic devices (this may interfere with reception).
- If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
- Briefly press the reset button on the back with a pen
- If necessary, place the station closer to a window, as reception inside buildings may be limited
Product information "BRESSER MyTime MC LCD Wall /Table Clock in wooden Design 225x150mm"
Featuring 6 cm high digits, the BRESSER MyTime MC LCD wall clock is ideal for offices and other large rooms. Thanks to the large digits, the time is easily visible from a long distance in almost all positions.
The time and summer/winter time change is configured automatically via a DCF time signal. The clock also displays the date, day of the week and temperature.
FEATURES
WHAT’S INCLUDED
The time and summer/winter time change is configured automatically via a DCF time signal. The clock also displays the date, day of the week and temperature.
FEATURES
- Large LCD display (194 x 110 mm)
- Large digits (6 cm high for time, 2 cm high for date, day of the week and temperature)
- Time is set via DCF radio signal, can also be set manually
- 12/24h format
- Time zone can be adjusted +/- 12 hours to CET
- Date format
- Day of the week can be displayed in different languages (German, English, Dutch, French, Italian, Spanish, Danish, Russian)
- Indoor temperature can be displayed in °C or °F
- 4 programmable alarm times
- Snooze function
- Battery operated: 3x AAA batteries (not included)
- Plastic housing with wooden look
WHAT’S INCLUDED
- Wall clock
- Instruction manual
| 1) Footnote: | Batteries user supplied, unless not content of delivery. |
|---|---|
| 2) Footnote: | not included with your purchase |
| Body material: | Plastic |
| Colour: | Wood look |
| Dial display: | Hours/Minutes/Seconds |
| Display size (diagonal in cm): | 22.8 |
| Extended warranty (years): | 5 |
| Field of application [Electronics]: | Alarm , Living , Temperature measurement , Time display |
| Frame material: | Plastic |
| Material: | Plastic |
| Measurement function: | Inside temperature |
| Net Weight total (incl. accessories) (g): | 330 |
| Net weight (without access.) (g): | 330 |
| Product Family [Electronics]: | MyTime |
| Sleeptimer: | No |
| Total height (mm): | 150 |
| Total length (mm): | 225 |
| Total width (mm): | 20 |
| Type [Watches]: | Wall clock |
| Type of mounting: | Stand , Wall bracket |
| Water-repellent: | No |
| Waterproof 8): | No |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- Risk of electric shock! This device contains electronic parts powered by a power source (power supply and/or batteries). Improper use of this product poses a RISK OF ELECTRIC SHOCK. An electric shock can cause serious to fatal injuries. Therefore, be sure to follow the safety information below.
- Never leave children unsupervised when handling the device! The device must only be used as described in the instructions, otherwise, there is a risk of electric shock.
- Disconnect the power supply if you are not using the device, in case of a long period of inactivity, and before any maintenance or cleaning work by pulling the power plug.
- Suffocation risk! Improper use of this product poses a suffocation risk, especially for children. Therefore, be sure to follow the safety information below.
- To disconnect the device from the power supply, always pull on the power plug and never on the cable!
- Check the device, cables, and connections for damage before use.
- Never operate a damaged device or a device with damaged live electrical parts! Damaged parts must be immediately replaced by an authorized service provider.
- Operate the device only in a completely dry environment and do not touch the device with wet or damp body parts.
- Suffocation risk! Improper use of this product poses a suffocation risk, especially for children. Therefore, be sure to follow the safety information below.
- Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a risk of suffocation! This product contains small parts that can be swallowed by children! There is a suffocation risk!
- Explosion risk! Improper use of this product poses an explosion risk. Be sure to follow the safety information below to avoid an explosion.
- Do not expose the device to high temperatures. Only use the supplied power supply or the recommended batteries. Do not short-circuit the device and batteries, or throw them into fire! Excessive heat and improper handling can cause short circuits, fires, and even explosions!
