BRESSER MikrOkular Full HD eyepiece camera

Slides and cover glasses are an indispensable accessory which has also impact on the image quality. For most biological microscopes, the cover glass thickness is an important optical parameter, which is therefore included in the optical design and, if so, printed on the sleeve of every objective. You can usually see the number 0.17 which is the thickness in millimeters. For demanding applications in the laboratory, or for microphotography, using cover glasses with the desired thickness and high quality is necessary.The cover glasses included in the set are made of Boro 3.3 glass and are standardized to a thickness of 0.16-0.19mm. So they match the desired 0.17mm really good and give the best possible image quality. These Boro 3.3 cover glasses are pure white, without streaks and are pre-cleaned and ready to use. They are also especially suitable for fluorescence microscopy.The slides are made of soda lime glass, and have ground edges for safe handling. They have a matte field for writing on both sides (top and bottom). Slides and cover glasses are packed separately and in a vacuum sealed bag, containing moisture absorbent. They can be stored for a long time without loss of quality from hydrolysis and are easy to take out.

Take pictures with your smartphone through the telescope or microskope? With the Smartphone camera adapter this is now child's play! Simply screw the adapter to the eyepiece and use your smartphone as a camera with a super-telephoto / super-macrophoto lens. It lets you take pictures of distant objects or very small objects as if you were very close.The Deluxe version offers an even more comfortable and secure attachment to the eyepiece. By a rotary movement of the clamping ring 3 clamping jaws are evenly applied to the eyepiece housing and the Smartphone adapter sits firmly and centrically on the eyepiece. The fine adjustment of the height of the smartphone support allows a quick and precise adjustment of the viewing height of the smartphone camera above the eyepiece lens. Good image results are thus guaranteed.  FEATURES Take photos through the telescope Smartphone camera with super telephoto lens Fine Height adjustment of phone support Wide adjustment range for eyepiece housing diameter Fits 31.7mm (1.25") eyepieces For eyepiece housing diameters from 22-38mm SCOPE OF DELIVERY Smartphone holder deluxeLocking ring for the smartphone

The set slides / cover plates is use to make Preparations for biological microscopes. The slide holds the preparation it will be covered with a cover plate.SCOPE OF DELIVERY50 blank slides 76x26mm100 cover plates (0,17mm thickness)These BRESSER slides and cover glasses are compatible with the following BRESSER microscopes:Duolux (5012000)BioDiscover (5013000)BIORIT (5101000)Erudit DLX (5102000)ERUDIT MO (5110000)Researcher Bino (5722100)Researcher Trinocular (5723100)LCD microscope (5201000, 5201002)Science TRM 301 (5760100)BioScience Bino (5750500)BioScience Trino (5750600)Science ADL 601 P (5770200)Science ADL 601 F (5770500)Science MPO 401 (5780000)Science IVM-401 (5790000)

The Researcher Trino offers observing fun for an unbeatable price. Based on a solid metal body and equipped with DIN eyepieces and objectives, this transmission-type microscope fulfils even professional demands with its optical and mechanical quality. Many details, for example the cross table for optimal object positioning or the focuser with coarse and fine drive for dead-sharp images. Instead of a binocular head, the Trino Researcher has a trinocular head. With this equipment, the observer can make binocular obseravtions and - at the same time! - take photographs or use a PC eyepiece Features Type: Biological microscope View: Trinocular Application range: Biology, Education, Teaching, Imaging Solutions, Botany Illumination: LED with dimmer Level: Intermediate, Expert Warranty: 2 years Double-lens condensor with iris diaphragm Incl. mechanical stage Adjustable eye relief Specifications Comfortable binocular view, 360° turnable head Magnifications: 1000x, 400x, 100x, 40x Illumination: LED Eyepieces: 10x Eyepiece diameter: 23.2 mm Objectives: 4x, 10x, 40x, 100x (oil immersion) Power supply: 220/240V Included Accessories 4 DIN-objectives 2 eyepieces Mechanical stage Condensor Trinocular head

The Analyth STR Trino has 3 different objective magnifications that can be changed simply by turning the objective. This means that the magnifications 10x, 20x and 40x can be changed directly. The stereo design shows structured objects particularly vividly and three-dimensionally. The low,10x initial magnification is particularly suitable for working with children. Objects up to 20mm in size can be viewed in their entirety. The Analyth STR is therefore particularly flexible to use. It is suitable for insects, plants, minerals and much more and has its areas of application in hobby, school and work. The stereomicroscope can be used for quality control, in horticulture and agriculture, for hydrology and much more. The trinocular tube enables the comfortable connection of a camera. The microscope is compatible (depending on the adapter) for microscope cameras, SLR and system cameras. Ask us which adapter you need. The interpupillary distance and dioptric compensation are individually adjustable. The eyepieces have a large field of view of 20mm. They are equipped with removable rubber eyecups and secured against removal. The microscope can be powered either with the mains adapter or with 3 batteries (not included). This means that it can also be used on the move, for example outside in the garden or on an excursion. PROPERTIES Microscope with 3 pairs of objectives, objective magnifications 1x; 2x; 4x Wide field eyepieces with eyecups and 20mm field of view Trinocular tube with 23.2mm mount Bright, economical LED illumination Illumination for incident and transmitted light can be switched separately Dimmer via membrane keys with status display Two specimen plates (black/white or glass matt), with specimen clips Dust cover Operating instructions Stand with LED illumination, separately or jointly switchable or dimmable SCOPE OF DELIVERY Microscope with 3 magnifications, 10x; 20x; 40x Trinocular tube Metal stand with LED illumination, power supply and battery compartment 2 eyepieces with rubber eyecups Glass object plate Plastic object plate (black/white) Dust cover Operating instructions

The immersion oil is used as a medium to get focus with a 100x oil objective. Without this oil it's not possible to get a sharp image.Volume: 5 ml

This Full HD eyepiece camera lets you capture photos and videos directly through your microscope. The MikrOkular LF fits either in place of an eyepiece or into the microscope’s third tube. With the included adapter rings, it can be used with almost any microscope as an eyepiece replacement. If your microscope has a built-in C-mount camera connection, you’ll need the Microscope Photo Adapter 30.5mm / C-Mount (Article No.: 5942030). The downloadable Windows software is user-friendly, making it ideal even for beginners. Along with image and video capture, it also includes a measurement function. Whether for hobbies, school, studies, or professional use, it’s a great tool for documentation. Compared to the MikrOkular Full HD, the integrated reduction optics provide around seven times the image field area. The camera's field of view is approximately the same as that of a 10x eyepiece of a student microscope. FEATURES Metal housing, USB-C port Integrated reduction optics for a wider field of view Resolution: 1920 x 1080 pixels, Full HD Frame rate: up to 25 fps Pixel size: 3x3 µm, sensor size: 5.86 x 3.28 mm 23.2 mm insertion diameter, built-in UV/IR cut filter Includes 30 mm and 30.5 mm microscope adapters Multilingual imaging software for Windows Image formats: JPG, TIF, PNG Video format: MP4 SYSTEM REQUIREMENTS Windows 10 or 11 Intel i3, i5, i7, or i9 processor (6th generation or later), or AMD FX / Ryzen processor (1st generation or later) Internet connection required for software download USB 2.0 or higher SCOPE OF DELIVERY Camera module with dust cover USB-C to USB-A cable CamLabLite software (download link), available in German, English, French, Spanish, Catalan, Italian, Turkish, Polish, Portuguese, and Bulgarian 30 mm and 30.5 mm adapters

Enter the world of astrophotography now. With the new BRESSER HD moon and planet camera with ST4 autoguider function. This camera is very good for astrophotography with short exposure times, i.e. for celestial objects like the moon, planets or star clusters. For astrophotography with long exposure times for low light deep sky objects, like galaxies and gas nebulae, we recommend the BRESSER Full HD Deep-Sky Camera (Art. No. 4959050) instead, with it's even higher resolution and sensor sensitivity. Equipped with the new high-sensitivity SONY IMX225 CMOS colour sensor, the BRESSER HD moon and planet camera delivers amazing image results with very short exposure times, even with simple telescope equipment. In addition, this ultra-modern camera can also be used as an autoguider, e.g. to actively track the main imaging device with SLR or CCD astro camera. A universal CMOS colour camera that delivers super-sharp lunar and planetary images in particular. The particularly low noise level of this new chip generation from SONY, ensures an exceptionally high brilliance and no cooling is required. Due to the high native pixel resolution of 1280x980, together with suitable telescopes, very beautiful images of the moon, but also detailed planetary images are possible. The ToupSky pro software included in the scope of delivery not only offers the necessary basic functions for image and video recording, but also many helpful special functions for image post-processing and for setting up the Guider. Functions such as live image display, exposure settings, white balance, dark image capture, stacking, timelapse recordings and much more can be individually configured. Especially the very sophisticated software makes it really easy for you to get started in astrophotography. With the automatic settings, you can produce absolutely presentable results without much prior knowledge. If you wish, simply switch off the automatic settings and gradually venture into the individual professional settings. Connect the camera directly to the ST4 connector of your telescope mount and you have fully automatic tracking control. This makes long exposures of several minutes possible without the stars producing unwanted line marks due to the ever-present synchronisation fluctuations of a telescope mount. A corresponding ST-4 connection cable is even included with the camera. Due to the high light sensitivity of the camera, you will always find a suitable guide star even with very short exposure times. For connection to guide tubes or off-axis guiders, the camera has a 1.25" plug-in sleeve, 1.25" filter thread (M28.5x0.6) and C-mount thread (1 "x1/32"). IMPORTANT NOTES: This is not a stand-alone guider camera. You always need a Windows 10 / 11 computer to take pictures and for autoguiding. The autoguider software is not included. You can use PHD2 Guiding, Guidedog, Metaguide, Guidemaster (freeware) or AstroArt, MaxIm DL (paid). DOWNLOAD PHD2-Guiding: https://openphdguiding.org/ DOWNLOAD GuideDog: http://barkosoftware.com/GuideDog/index.html DOWNLOAD latest camera software and drivers: http://www.touptek.com/download/showdownload.php?lang=en&id=2 SPECIFICATIONS Camera type: BRESSER / Touptek GPCMOS01200KPF color Sensor: SONY IMX225 CMOS colour Image and video size: Full HD 1280 x 960 pixels (video 30-54,4 FPS) Native sensor size in pixels: 1280 x 960 Exposure times: 102ms to 16min Binning: YES, 1x1 and 2x2 Megapixel: 1.2 MP Sensor size in mm: 4.8 x 3.6 Pixel size: 3.75 µm x 3.75 µm Bit depth: 8/12 switchable ST-4 Compatible Autoguider: YES CNC milled housing made of aluminum Protective strap on the camera housing Camera tube diameter: 1.25 inch (31.7 mm) Camera connection thread: C-mount + 1.25 "filter thread Computer interface: USB 2.0 C-mount extension tube with 1.25 inch filter thread included No IR cut filter installed Operating system: WINDOWS 10 + 11 ASCOM and WDM driver included Field of view for different focal lengths in mm (given in arc minutes): 400 mm - 41,2'x 30,9' 500 mm - 33'x 24,7' 600 mm - 27,5'x 20,6' 700 mm - 23,5'x 17,7' 800 mm - 20,6'x 15,4' 900 mm - 18,3'x 13,7' 1000 mm - 16,5'x 12,4' 1250 mm - 13,2'x 9,9' 1500 mm - 11'x 8,2' 1750 mm - 9,4'x 7,1' 2000 mm - 8,2'x 6,2' SCOPE OF DELIEVRY HD camera C-mount adapter USB 2.0 PC connection cable with a length of 180cm Interface cable for ST-4 autoguider port with 150cm length Dust cap for camera tube Software CD

The BRESSER MikroCam SP microscope cameras help to make photos and videos with a microscope very easy.The modern CMOS sensors  give brilliant colors with very low noise and is the perfect choice for any application where true natural colors are important. The included imaging software has multiple adjustments for the capture of still images and videos. The integrated measuring* routine allows for a measurement in the camera live image. The software can be operated in the following languages: German, English, French, Polish, Russian, Turkish, Chinese. The camera housing includes the c-mount adapter thread. For use with 23,2mm adaptations, we recommend the optional, variable 0,5x reducer (item no. 5914005). For special applications the camera can also be mounted using the 1/4” camera tripod thread. FEATURES2592 x 1944 Pixel Sensor 5,70 mm x 4,28 mm (1/2,5'')High quality metal housingNumerous software functions, e.g. measurement, focus-stacking (combines several images for more depth of focus), mosaic (for larger image fields)Image and video capture, incl. time lapse functionGood compatibility with different microscopes SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 CPU from the 6nd generation orAMD Ryzen CPUOptical Disk Drive or internet connection for software downloadUSB 2.0 SCOPE OF DELIVERYCamera headUSB 2.0 cable (approx. 1.8 m)Adapters for 23.2 mm, 30 mm and 30.5 mm eyepiece holdersCapture and image processing software

The BRESSER Erudit ICD microscope is a stereo dissecting microscope and gives a threedimensional view. This is especially impressive when viewing structured materials.WIth the maximum object height of 53mm you can view also bigger objects. The microscope is perfect for a variety of objects, like plants, insects, geological handpieces, etc. The Erudit ICD is also the perfect choice for children, because there is no need for tedious and difficult sample preparation. Simply place the sample on the object plate and view the finest details! The black/white object plate gives good contrast when viewing with incident light. With battery power the microscope is ready for your next excursion or field work, or use it anywhere around the house. With the sturdy carry case it is easily transported or stowed away.FEATURESType: Stereo microscope / dissecting microscope with incident and transmitted lightApplications: Biology, botany, insectsBlack/White-Object plate for optimized contrastGlass object plate, 94mmRubber eye cups for comfortable viewing, reduces stray lightSmartphone holder for conveniant documentationLong life LED lighting, battery powered. Use anywhere, e.g. for field workAdjustable binocular head, diopter adjustmentSturdy carry caseSPECIFICATIONSMagnification: 20x, 40xStereo-ObjectiveEyepiece barrel diameter: 30,5 mmBattery powered (3x )Type AASCOPE OF DELIVERYStereo dissecting microscope with transmitted and incident light2x wide field 10x eyepiecesStereo objectives, 2x/4xGlass object plate, clear glass Black/white object plateSmartphone holderPlastic carry case

The BRESSER camera adapter is the ideal connecting piece between your 35 mm SLR camera or DSLR and your telescope. The adapter is suitable for 1.25" eyepieces with a larger housing diameter of up to 55 mm. Please note, this adapter will be suitable for most Refractors and Cassegrain designs, but may not be suitable for use with all Newtonian designs of telescopes, due to the comparatively short travel of focus in some Newtonians. Please check with us if you'd like further advice regarding your particular telescope.FEATURESvariable camera adapterfor eyepiece projection and prime focusincludes a short prime focus adapter from 1.25" to T2 threadsuitable for 1.25" eyepieces up to 55mm housing diameter barrel diameter: 31.7mm (1.25")WHAT'S INCLUDEDvariable camera adapter

Take pictures with your smartphone through the telescope or microskope? With the Smartphone camera adapter this is now child's play! Simply screw the adapter to the eyepiece and use your smartphone as a camera with a super-telephoto / super-macrophoto lens. It lets you take pictures of distant objects or very small objects as if you were very close.The Deluxe version offers an even more comfortable and secure attachment to the eyepiece. By a rotary movement of the clamping ring 3 clamping jaws are evenly applied to the eyepiece housing and the Smartphone adapter sits firmly and centrically on the eyepiece. The fine adjustment of the height of the smartphone support allows a quick and precise adjustment of the viewing height of the smartphone camera above the eyepiece lens. Good image results are thus guaranteed.  FEATURES Take photos through the telescope Smartphone camera with super telephoto lens Fine Height adjustment of phone support Wide adjustment range for eyepiece housing diameter Fits 31.7mm (1.25") eyepieces For eyepiece housing diameters from 22-38mm SCOPE OF DELIVERY Smartphone holder deluxeLocking ring for the smartphone