BRESSER MikroCamII Microscope Camera 12MP

The BRESSER Mechanical Stage for Stereo Microscopes allows precise object movement in both the X and Y directions, making accurate positioning easy. Each axis features a vernier scale for added precision. Thanks to its adjustable movement, the mechanical stage can also be used to create mosaic images when combined with a BRESSER MikroCam (II, SP, SF). It is designed to replace the standard stage plate on a microscope and is compatible with devices that have a 95 mm stage plate. The maximum movement range is 165 x 65 mm, depending on the microscope’s size. With a height of 26 mm above the microscope stage, the mechanical stage slightly reduces the maximum object height. Compatible with the following devices: BRESSER Erudit ICD (5803600) BRESSER Advance ICD (5804000) BRESSER DST-0745 (5808100) FEATURES Suitable for microscopes with a 95 mm object plate Maximum movement range: 165 x 65 mm (depending on the microscope size) Coaxial adjustment knobs for smooth operation Precision measuring bar with vernier scales on both axes Compatible with both reflected and transmitted light microscopy SCOPE OF DELIVERY Mechanical stage with glass plate and two object clamps

The BRESSER DST-0745 is a special microscope that is operated with a c-mount camera (camera not included). This allows direct viewing on a screen. Due to the vertically installed optics, there is no shifting of the image when focusing. This is especially useful for "focus stacking" shots. The zoom is continuously adjustable from 0.7x - 4.5x. A coarse and fine focus adjustment facilitates focusing, especially at high magnifications. The convenient and user-friendly operation makes the digital microscope particularly suitable for daily use in the workshop. Measurements, quality control of surfaces or inspection of components and raw materials are easy with the workshop microscope. Insects, plants and rocks are also impressively displayed. The DST-0745 workshop microscope is not suitable for visual observation. It can only be used in combination with a MikroCam c-mount microscope camera. It is designed for camera sensors of about 1/2". Smaller sensors can be used without problems. With larger sensors there is vignetting, which becomes somewhat less at higher magnifications. Due to the two flexible incident light lamps, the light can be optimally positioned. The transmitted light illumination helps when observing transparent objects. The brightness of both illuminators can be adjusted in five steps. The magnification of a USB camera differs from the magnification of the lens. It depends, among other things, on the sensor size and the display on a monitor. It can be compared to macro lenses with macro factor 0.7:1 up to 4.5:1. Compatible MikroCam cameras: 5914131 MikroCam SP 1.3 MP 5914320 MikroCam SP 3.1 MP 5914520 MikroCam SP 5.0 MP 5914004 MicroCamII 5914020 MicroCamII 5914310 MicroCamII 5914912 MicroCamII 5914180 MikroCam PRO HDMI 5914190 MikroCam PRO HDMI 5MP 5914195 MikroCam Pro HDMI Autofocus FEATURES Designed for C-mount microscope cameras Up to 1/2" sea sensor size Continuous zoom (0.7x - 4.5x) Two flexible incident light LED lamps LED transmitted light illumination Adjustable brightness SCOPE OF DELIVERY Zoom lens head 0.7x - 4.5x Stand with incident and transmitted light illumination Object plate glass (one side frosted) Object plate plastic (one side white, one side black) Power supply unit, operating instructions, dust cover

This 2x microscope objective is specially designed for the Science DST-0745. This achieves an objective magnification of 1.4x – 9x (regular: 0.7x – 4.5x). The actual object magnification is created in conjunction with the camera used and appears higher on the screen. In addition, this lens significantly increases resolution. The working distance is reduced to approximately 35 mm. FEATURES Compatible with the Science DST-0745 Increases magnification and resolution Easy to install 35 mm working distance SCOPE OF DELIVERY 2x magnification Objective

The BRESSER 0.5x reducing lens is designed to enlarge the image from a microscope camera. It increases the light intensity and therefore reduces the exposure time. In the case of trinocular microscopes, the adapter usually enables the focus to be matched to the focus of the eyepiece.It is compatible with focusers with a 23.2 mm receptacle. This adapter is specially designed for cameras with sensor sizes of 1/2'' or 1/3''. The connection is made via a 1'' C-mount thread. FEATURES:C-mount threadMicroscope connector: 23.2 mmMagnification factor: 0.5x DELIVERY CONTENT:0.5x reduction lens (fixed)

The zoom stereo microscope BRESSER Advance ICD is suitable for a wide variety of objects. Because of the Greenough design with two tilted objectives, you can view the sample in 3D. The three-dimensional view is also very helpful when working under the microscope, e.g. when soldering, dissecting or preparing a sample.The precise zoom enables you to view your sample in a wide range of magnifications from 1x to 4x (zoom ratio 4.0). When zooming, only slight refocussing is necessary. To do this, the Advance ICD microscope is equipped with a very precise, coaxial coarse and fine focus. The fine focus is especially helpful when using high magnifications or for imaging. When doing focus stacking with our MikroCam cameras (optional) the fine focus is also a big help.The interpupillary distance of the eyepiece pair is adjustable. Both eyepiece holders are equipped with diopter adjustment, which allows users with bad eyesight to compensate up to 8 dpt. difference between left and right eye. The 10x wide field eyepieces have field number (FN) 22 and are equipped with soft rubber eyecups. The microscope head can be moved on the long rod of the stand, which allows you to observe big samples up to a size of 22 cm.The angle of the bright LED reflected light illumination can be adjusted as necessary. The extra bright and even LED transmitted light provides a flat background when viewing transparent samples. The switch allows you to select reflected light, transmitted light or a combination of both to match your requirements. Brightness is adjustable with the dimmer. The bright light does not heat up, which allows you to observe also living specimens over a longer period of time. The long lasting LED is powered by a 5V AC adapter (EU/UK). The power cable comes with a USB plug.Fully equipped, the Advance ICD covers an exceptionally wide range of magnifications and is therefore suitable for a variety of tasks. Besides the included 2x lens there is also a selection of other auxiliary objectives available. With these, you are able to adjust magnification, working distance and depth of focus according to your needs.Magnifications in basic setting (no optional accessories):10x eyepieces: 10x – 40x10x eyepieces plus 2x auxiliary lens: 20x – 80x20x eyepieces: 20x – 80x20x eyepieces plus 2x auxiliary lens: 80x – 160x(other magnifications are possible when using other auxiliary lenses and/or eyepieces)The third tube is designed to permanently attach a camera. The image of the left eyepiece is diverted to the camera port with a lever/switch. We supply a selection of camera adapters for DSLR, mirrorless cameras and c-mount microscope cameras. This enables you to attach virtually any camera body as long as you have a model with interchangeable lens.APPLICATION RANGEQuality control in industryMaterials scienceLaboratoryBotany, gardening, farmingHydrology, aquaculture, fishkeepingInsects, Entomology, pest controlPlant physiology, raw food materials, medicinal herbsSchools, teachingFEATURESTrinocular head with 2 eyepieces and camera port with switchCompatible with BRESSER MikroCam cameras and others1x-4x stereo-zoom head2x auxiliary lensDiopter adjustment on both eyepiece holdersAdjustable interpupillary distance (52 – 72 mm)Bright LED light (reflected / transmitted)2 different object plates for best contrastView samples of up to 22 cm heightAC adapter Euro/UK (5V / 1000 mA) with USBHeavy build with metal standIncludes 2 pairs of widefield eyepiecesSCOPE OF DELIVERYMicroscope2 pairs of eyepieces (WF 10x / WF 20x)2x auxiliar lens (1 pcs)1 pair of rubber eyecupsObject plate 94 mm (black / white)Glass object plate 94 mm (matte)AC adapter Euro/UK (5V / 1000 mA)Dust coverPrinted manual

Microscope slides with a micrometer scale are used for the calibration for measurements.They are used in combination with a micrometer eyepiece or a measurement software (for cameras) in order to measure preparations. The broad scale is suitable for lower magnifications, the fine scale for higher magnifications.