BRESSER MikroCam SP 5.0 Microscope Camera

The zoom stereo microscope BRESSER Advance ICD is suitable for a wide variety of objects. Because of the Greenough design with two tilted objectives, you can view the sample in 3D. The three-dimensional view is also very helpful when working under the microscope, e.g. when soldering, dissecting or preparing a sample.The precise zoom enables you to view your sample in a wide range of magnifications from 1x to 4x (zoom ratio 4.0). When zooming, only slight refocussing is necessary. To do this, the Advance ICD microscope is equipped with a very precise, coaxial coarse and fine focus. The fine focus is especially helpful when using high magnifications or for imaging. When doing focus stacking with our MikroCam cameras (optional) the fine focus is also a big help.The interpupillary distance of the eyepiece pair is adjustable. Both eyepiece holders are equipped with diopter adjustment, which allows users with bad eyesight to compensate up to 8 dpt. difference between left and right eye. The 10x wide field eyepieces have field number (FN) 22 and are equipped with soft rubber eyecups. The microscope head can be moved on the long rod of the stand, which allows you to observe big samples up to a size of 22 cm.The angle of the bright LED reflected light illumination can be adjusted as necessary. The extra bright and even LED transmitted light provides a flat background when viewing transparent samples. The switch allows you to select reflected light, transmitted light or a combination of both to match your requirements. Brightness is adjustable with the dimmer. The bright light does not heat up, which allows you to observe also living specimens over a longer period of time. The long lasting LED is powered by a 5V AC adapter (EU/UK). The power cable comes with a USB plug.Fully equipped, the Advance ICD covers an exceptionally wide range of magnifications and is therefore suitable for a variety of tasks. Besides the included 2x lens there is also a selection of other auxiliary objectives available. With these, you are able to adjust magnification, working distance and depth of focus according to your needs.Magnifications in basic setting (no optional accessories):10x eyepieces: 10x – 40x10x eyepieces plus 2x auxiliary lens: 20x – 80x20x eyepieces: 20x – 80x20x eyepieces plus 2x auxiliary lens: 80x – 160x(other magnifications are possible when using other auxiliary lenses and/or eyepieces)The third tube is designed to permanently attach a camera. The image of the left eyepiece is diverted to the camera port with a lever/switch. We supply a selection of camera adapters for DSLR, mirrorless cameras and c-mount microscope cameras. This enables you to attach virtually any camera body as long as you have a model with interchangeable lens.APPLICATION RANGEQuality control in industryMaterials scienceLaboratoryBotany, gardening, farmingHydrology, aquaculture, fishkeepingInsects, Entomology, pest controlPlant physiology, raw food materials, medicinal herbsSchools, teachingFEATURESTrinocular head with 2 eyepieces and camera port with switchCompatible with BRESSER MikroCam cameras and others1x-4x stereo-zoom head2x auxiliary lensDiopter adjustment on both eyepiece holdersAdjustable interpupillary distance (52 – 72 mm)Bright LED light (reflected / transmitted)2 different object plates for best contrastView samples of up to 22 cm heightAC adapter Euro/UK (5V / 1000 mA) with USBHeavy build with metal standIncludes 2 pairs of widefield eyepiecesSCOPE OF DELIVERYMicroscope2 pairs of eyepieces (WF 10x / WF 20x)2x auxiliar lens (1 pcs)1 pair of rubber eyecupsObject plate 94 mm (black / white)Glass object plate 94 mm (matte)AC adapter Euro/UK (5V / 1000 mA)Dust coverPrinted manual

The BRESSER 0.5x reducing lens is designed to enlarge the image from a microscope camera. It increases the light intensity and therefore reduces the exposure time. In the case of trinocular microscopes, the adapter usually enables the focus to be matched to the focus of the eyepiece.It is compatible with focusers with a 23.2 mm receptacle. This adapter is specially designed for cameras with sensor sizes of 1/2'' or 1/3''. The connection is made via a 1'' C-mount thread. FEATURES:C-mount threadMicroscope connector: 23.2 mmMagnification factor: 0.5x DELIVERY CONTENT:0.5x reduction lens (fixed)

The BRESSER 0.5x reduction lens is used to change the image field of a microscope camera. Itallows to zoom in or out. The brightness becomes more intensive, to reduce the exposure time.For trinocular microscopes the adapter allows to adjust the focus to get the same focus for every eyepiece. It is compatible with 23.2 mm eyepiece holders. This adapter is designed for cameras with sensor sizes from 1/2 " or 1/3". The connection is made via 1 " C-mount thread. FEATURES For cameras with 1" c-mount thread To adjust the image field For 23.2 mm eyepiece holders SCOPE OF DELIVERYReduction lens 0.5x variable

Microscope slides with a micrometer scale are used for the calibration for measurements.They are used in combination with a micrometer eyepiece or a measurement software (for cameras) in order to measure preparations. The broad scale is suitable for lower magnifications, the fine scale for higher magnifications.

Take pictures with your smartphone through the telescope or microskope? With the Smartphone camera adapter this is now child's play! Simply screw the adapter to the eyepiece and use your smartphone as a camera with a super-telephoto / super-macrophoto lens. It lets you take pictures of distant objects or very small objects as if you were very close.The Deluxe version offers an even more comfortable and secure attachment to the eyepiece. By a rotary movement of the clamping ring 3 clamping jaws are evenly applied to the eyepiece housing and the Smartphone adapter sits firmly and centrically on the eyepiece. The fine adjustment of the height of the smartphone support allows a quick and precise adjustment of the viewing height of the smartphone camera above the eyepiece lens. Good image results are thus guaranteed.  FEATURES Take photos through the telescope Smartphone camera with super telephoto lens Fine Height adjustment of phone support Wide adjustment range for eyepiece housing diameter Fits 31.7mm (1.25") eyepieces For eyepiece housing diameters from 22-38mm SCOPE OF DELIVERY Smartphone holder deluxeLocking ring for the smartphone

The BRESSER Science ETD-201 is a high-quality stereo reflected-light and transmitted-light microscope. It is perfectly qualified for medical applications, the use in agriculture and forestry, in criminology, in academic and scientific institutes and schools, as well as for the assembly and quality assurance of components in precision mechanics and electronic engineering. The extra wide foot with stage and exceptionally tall height range permit observations of large objects. The integrated reflected- and transmitted-light illumination can be used in combination and is dimmable. The angle of incidence can be user-friendly adjusted and locked in position. A continuous range of magnification from 8x to 50x is possible with the exchangeable wide field eyepieces (WF 10x) and the 6.25-times stereo zoom objective lens (0,8x-5x).The interpupillary distance and dioptre compensation can be adjusted individually. The trinocular microscope head is rotatable (360°) and comes with two 45° inclined eyepiece tubes and a separate camera tube for the attachment of a c-mount camera or MikroCam.SCOPE OF DELIVERYMicroscope zoom headMicroscope stand2x eyepiece (WF 10x)Glass platePlastic plate (black & white)Dust coverManual